Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.2 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹18.8 L+₹2.5 L (15.6%)Rejected-Finance | L2 | Rejected-Finance Other than Lowest Bidder |
Tender Value
₹21.6 L
EMD Value
₹43,150
Closing Date
5 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Kapurthala
GE Kapurthala
Provn of certain minor and revenue works at AGE BR Beas under GE Kapurthala
2023_MES_622846_2
GE KPT- /2023-24
Open Tender
Civil Works
Item Rate
180 days
Area under GE Kapurthala
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE Kapurthala
₹43,150
Yes
29 Jan 2024
21 Nov 2023
7 Dec 2023
21 Nov 2023
5 Dec 2023
21 Nov 2023
Amount
M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified and directed by Engineer-In-Charge.
M&L for surface excavation of soft/loose soil n.exc. 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed by Engr-in-Charge.
M&L for hard core of gauge n.exc. 63mm deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surfaces complete all as specified and directed by Engr-in-Charge.
M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 on walls finished even and fair, complete all as specified and directed by Engineer-In-Charge.
M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 on walls finished even and fair, complete all as specified and directed by Engineer-In-Charge.
M&L for preparation of new plastered surfaces and applying two coats of cement base paint over and including a coat of chalk whiting/priming on plastered surfaces of walls, complete all as specified and directed by Engineer-in-charge.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engineer-In-Charge.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by Engineer-In-Charge.
M&L for 75mm thick cement concrete type C2 1:3:6 (40mm graded stone aggregate) in sub base. Complete all as specified and directed by Engineer-in-Charge.
S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing , complete all as specified and directed by Engineer-In-Charge.
M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over and including a coat of red oxide primer. Complete all as specified and directed by Engineer-In-Charge.
M&L for providing reinforced cement concrete cast in situ Type B-1, 1:2:4 ( 20 mm graded stone aggregate) as in lintels upto 1.5m clear span including necessary formwork complete all as specified and directed by engr in charge.(Note : Reinforcement shall be measured and paid separately)
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to. Complete all as specified and directed by Engineer-In-Charge.
-Ditto- all as per item No 13 above but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders. Complete all as specified and directed by Engineer-In-Charge.
M&L for cement concrete type D2, 1:4:8, (40mm graded aggregate) as in foundations, filling and mass concrete, complete all as specified and directed by Engineer-in-Charge.
Excavating in trenches in any type of soil not exceeding 1.5m wide and not exceeding 1.5 m depth for foundation & getting out, complete all as specified and directed by Engineer-in-Charge.
Returning filling including spreading, leveling, watering and well ramming in layers not exceeding 25cm for soft/loose soil, complete all as specified and directed by Engineer-in-Charge.
Removing excavated materials (soil) to a distance not exceeding 50m and depositing where directed of a level not exceeding 1.5m above the starting point. Complete all as specified and directed by Engineer-in-Charge.
M&L for providing 40 mm thick precast cement concrete louvres and jallies, (measured solid), including all mouldings but excluding frame in cement conc type B0, 1:2:4 and set in CM 1:4. Complete all as specified and directed by Engineer-in-Charge.
M&L for providing cement concrete as Damp Proof Coursein Cement mortar (1:2:4), Type B0, 40mm thick to horizontal or vertical including necessary form work and work, weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed by Engr-in -Charge.
M& L for applying evenly a coat of blow type bitumen at the rate of 1.50kg per sqare met re and binding with clean dry sand @ 0.05cu.m per sq.m.with water proofing Compound,Type B0, 1:2:4 (12.5mm graded aggregate) including necessary formwork complete all as specified and directed by Engr-in-charge.
Supply and fixing polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50kg per sqm complete all as specified and directed by Engr-in-charge.
Supply only Integral Wate proofing Compound complete all as specified and directed by Engr-in-charge.
S&F Form Work to sides and soffits of RCC/PCC Band, floor or roof beams, beam haunchings, girders, lintels , RCC/PCC Bands cantilevers, shelves includig supports, overhangs, etc also splays between floors and beams etc complete and similar work all exceedig 20cm wide complete all as specified and directed by Engr-in-charge.
S&F collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets including cutting through walls and making good etc. Complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over and including a coat of red oxide primer. Complete all as specified and directed by Engineer-In-Charge.
M&L for 40mm thick PCC 1:2:4 type B-1 with 20mm graded stone aggregate as in flooring, finished even and rough to receive the topping layer. Complete all as specified and directed by Engineer-in-Charge.
M&L for joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4. Complete all as specified and directed by Engineer-In-Charge.
M&L for coloured glazed ceramic tiles in vertical surface 450x300x7 mm thick laid over 10mm thick screed bed in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or colour cement to match Complete all as specified and directed by Engineer-in-charge.
Excavation in post holes(or similar holes ) each not exceeding 0.50 Cum, and getteing out, returning filing in and ramming earth with broken rubble mixed with earth around in layers not exceeding 25cm, watering etc and removing surplus soil not exceeding 50m and making good surface in loose/soft soil, complete all as specified and directed by Engineer-In-Charge.
M&L for cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in foundation, filling and mass concrete. Complete all as specified and directed by Engineer-in-Charge.
S&F MS Pipes as in vertical posts, fixed with angle cleats or other connecting plates, rivets ,nut bolts etc, complete all as specified, conforming Fe 410W (Gde E-250) Quality B Complete all as specified and directed by Engineer-in-Charge.
S&F Roof truss/Framed works as in purlins, crane grantries, rails and fastening and heavy brackets framing Beam( of tee,angle, pipes of flat section , base plates etc) incluidng distence pieces. Complete all as specified and directed by Engineer-In-Charge.
S&F expanded metal of weight not exceeding 4kg/Sqm, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed completeto wood or steel members Complete all as specified and directed by Engineer-in-Charge.
S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. Complete all as specified and directed by Engineer-in-Charge.
M&L PCC 1:2:4 Type B-1 ( 20 mm graded stone aggregate) as in lintels/Bends above jafri wall, bed blocks, coping, etc. Complete all as specified and directed by Engineer-In-Charge.
M&L for providing precast cement concrete as in posts to RCC Jali, with plain fair faces, including chamferes, weatherings, throating etc, and setting in mortar complete with joints to match in cement concrete type B0-1:2:4 and set in CM 1:4 complete all as specified and directed Complete all as specified and directed by Engineer-in-Charge.
M&Lfor cement Concrete work in pavement/hard standing of flexural strength 40kg/per square centimeter in field using 400kg of cement per cubic meter, complete all as specified and directed by Engr-in-charge.
M&L for Forming 12mm thick 100mm dep expansion joints filled with pre-formed biyuminous filler and top 30mm primed and sealed withsealing compound, Grade-`A` complete all as specified and directed by Engr-in-charge.
M&L for Finishing of Concrete pavement surface by belting complete all as specified and directed by Engr-in-charge.
G M BUILDERS 36
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .