WELCOME MAINTENANCE AND CERTAIN MISC BR REPAIR TO MD ACCN AND CERTAIN REPAIRS TO INTERNAL WIRING AND REPLACEMENT OF LIGHT FITTINGS AND FIXTURE UNDER WELCOME MAINTENANCE OF MD ACCN AT BALASORE

Amount

NOTE (Applicable for all items) :- The bidders/contractors are advised to read tender document & all corrigendum / amendments and General conditions of contracts before entrying/quoting the rates. SCHEDULE 'A' PART-I (B/R WORK)

M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth Without using extra cement complet including taking down old cement plaster all as specified.

M&L for 5 mm thick cement plaster in cement mortar 1:3 of ceiling, finished even and smooth with out using extra cement including taking down old cement plaster complete all as directed.

M&L three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and as directed.

M&L Preparation of old plaster surfaces and one coat of white wash on ceiling complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls applying 3 mm thick wall care putty to achieve smooth surface rubbing with sand paper and applying two coats of oil bound distemper over a coat of alkali-resiatant primer complete all as specified and directed.

M&L Preparation of old plaster and two coat oil bound distemper applying of decorated plastered surfaces on wall complete all as specified and as directed.

M & L Complete removal of existing treatment of walls and applying two coat of oil emulsion distemper over a coat of alkali resistant primer including a coat of 3mm thick wall care putty complete all as specified and directed.

M & L for removal of damped surface of wall, ceiling, etc. and applying 2 coats of Damp proof course (Dr fixit, Redwof,SICA) and applying 3 mm thick wall care putty to achieve smooth surface rubbing with sand paper and applying two coats of oil bound distemper over a coat of alkali-resiatant primer complete all as specified and directed.

M&L preparation of old surfaces and applying one coat of synthetic enamel paint to wooden surfaces over 10 cm width or girth complete all as specified and as directed.

M&L preparation of old surfaces and applying one coat of synthetic enamel paint to steel surfaces over 10 cm width or girth complete all as specified and as directed.

M & L for 12mm Plywood, grade BWP, type BB fixed with screws to timber framework to make kitchen cabinets etc as specifed and directed.

M & L for 18/19mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work to make Kitchen cabinet door etc as specifed and directed.

Supply only 0.9 mm thick Decorative laminates type I, or surface finish, colour and pattern with requisite adhesive as approved

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) and rubbish off the premises.

M&L Rendering 10 mm thick cement plaster in CM 1:4 on fair faces of brick Work (internal surfaces) for fixing of wall tiling.

M&L for 15 mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor finishes for non skid ceramic and grinaite tiles .

M&L Glazed ceramic coloured tiles 450 mm x 350 mm x 7 mm thick coloured tiles as in dado, skirting and vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exc 0.11 sqm (300 mm x 300 mm) in floors etc set & jointed in neat cement slurry and pointed in coloured cement.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm (400 mm x 400 mm) in floors etc set & jointed in neat cement slurry and pointed in coloured cement.

M&L for vertified ceramic tiles 10mm thick light shade (Square/rectangular) polished area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

M & L granite slab (of any type) 20 mm thick machine cut, bedded and jointed with gray cement slurry and pointed with white cement with admixture of pigments to match the shade of granite stone including cutting and polishing complete.

Taking up or down steel/CPVC water tubing and connecting incl cleaning for refixing or removal to stores for 15 mm bore.

Taking up or down steel/CPVC water tubing and connecting incl cleaning for refixing or removal to stores for 20 mm bore.

Supplying and laying of 16 mm dai CPVC pipes SDR 11 & for provision of special CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified

Supplying and laying of 20 mm dai CPVC pipes SDR 11 & for provision of special CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified

Brass Elbow 16/20mm dia

L Brass Elbow (3/4 X ½)

M Brass Tee 16mm

M Brass Tee 20mm

Male Brass Threaded Adaptor (MTA/ MBTA) ) for 16mm

Fe male Brass Threaded Adaptor (MTA/ MBTA) ) for 16mm

Union 16mm

Union 20mm

S&F in repairs wash down water closet (pedestal pattern) complete white with plastic water closet seat black closed pattern with flat bottom anc cover and mild steel chromium plated or aluminised hinging device and flush pipe of polythelene of low or density or PVC 32mm dia for low level flushing cistern complete

Supply and fix Vitreous china Squatting pan Orissa pattern of size 580mx440mm wite with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding in repairs

Supply and fix PVC valveless syphonic action type flushing cistern dual flush 10 liters capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe in repairs.

Supply and fix PVC connection 15mm size with PTMT nuts of length 600mm as in repair

S&F vitreous china wash basin, white, flat back size 550x400mm, incl cutting for and pinning in ends of brackets or erecting stand but excl taps, pvc conections but incl brackets,wastevpipe,waste coupling in repairs

S&F in repairs stainless steel kitchen plate rack of 0.6 mm thick of approved make with plugs, washers, over all size 750mm x 600m complete.

Dismantling water tanks of capacity exc 250 and n. exc 500 ltrs capacity and removing to store.

Dismantling water tanks of capacity exc 500 and n. exc 1000 ltrs capacity and removing to store.

S&F 500 litre capacity rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as per specified in SSR Part-I.

S&F 1000 litre capacity rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as per specified in SSR Part-I.

S/F PVC ball valves high pressure with polythene float and fly nut complete, screwed for iron pipe of 20mm bore in repair.

S&F in repair 15 mm dia fancy type CP bib taps, cast copper alloy with crutch or butterfly handle, screwed down fixed in repairs.

S&F in repairs 15 mm dia fancy type CP pillar taps, cast copper alloy with capstan head, chromium plated screwed down fixed high pressure, long screwed shanks and fly nuts, screwed for iron pipe in repairs.

S&F in repairs 15 mm dia CP concealed type stop valves/ angular stop valves , cast copper alloy, screwed down,high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or unions in repairs.

S&F stainless steel sink, 1.00 mm thick for kitchen with plug, waste pipe, washer including cantilever cast iron bracket, connecting union overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm fixed in repair (Make-Nirali/Blue star or equivalent model of make as specified in Appendix 'B')

S&F CP soap case in repair

S&F sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard railing 60 cm long in repairs.

S/F brass chromium plated shower rose 125 mm size fixed in repair.

S&F Brass CP tubular towel rail, 20mm dia, "D" type, 60 cm long between flanges fixed in repair.

SCHEDULE 'A' PART-II (ELECTRIFICATION)

Taking down carefully copper/aluminium point wiring including sunken MS boxes (light, fans, socket or power) complete, (fittings such as switches, ceiling roses,call bell, pendants, regulators, socket etc by unscrewing from board carefully and making good disturbed surfaces of walls, floors etc complete all as specified & directed.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (medium grade) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one light / fan point controlled by one 5/6 amps, one way switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC casing caping (medium grade) of size not less than 25 mm width and accessories, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one light / fan point controlled by one 5/6 amps, one way switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (medium grade) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for for one 5/6 amps socket outlet on same board controlled with other switch complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (medium grade) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one 5/6 amps socket outlet on independent board controlled with one, oneway switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 4 Sqmm (phase & neutral) and one run of 4 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (medium grade) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one 15/16 amps socket outlet on independent board controlled with one, 15/16 amps one way switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

S&F Switch piano, flush type, single pole, one way 5 Amps, 240V complete all as directed.

Fixing only Switch piano, flush type single pole, one way, 5 Amps, 240V complete all as directed. Note : Serviceable Switchs obtained from Sl Item No 2.01 shall be reused.

S&F Switch piano, flush type, single pole, one way 15 Amps, 240V complete all as directed.

Fixing only Switch piano, flush type single pole, one way, 15 Amps, 240V complete all as directed. Note : Serviceable Switchs obtained from Sl Item No 2.01 shall be reused.

S&F Bell push Switch, flush type, single pole, one way 5 Amps, 240V complete all as directed.

S&F Switch socket combination 2 in 1, 5 pin, 5 Amps flush type 240 Volt.

Fixing only Switch socket combination 5 Amps, flush type. Note : Serviceable Switch socket combination 5 Amps obtained from Sl Item No 2.01 shall be reused.

S&F Socket outlet 2 in 1, 5 pin, 5 Amps flush type 240 Volt.

Fixing only socket Outlet 5 Amps, flush type. Note : Serviceable socket outlet obtained from Sl Item No 2.01 shall be reused.

S&F Socket outlet 2 in 1, 5 pin, 5/15 Amps flush type 240 Volt.

Fixing only socket outlet 15 Amps, flush type. Note : Serviceable socket outlet obtained from Sl Item No 2.01 shall be reused.

S&F Switch socket combination 5/15 Amps flush type,6 pin,5 in 1.

Fixing only Switch socket combination 15 Amps. Note : Serviceable Switch socket combination 15 Amps obtained from Sl Item No 2.01 shall be reused.

S&F Ceiling rose,3 terminal PVC/poly carbonate isolated body.

Fixing only ceiling rose. Note : Serviceable ceiling rose obtained from Sl Item No 2.01 shall be reused.

Fixing only lamp holder. Note : Serviceable Lamp holder obtained from Sl Item No 2.01 shall be reused.

Supply and fixing including connection of modular switch one way 6 Amps 1 Module complete all as specified and directed.

Supply and fixing including connection of modular switch one way 16 Amps 1 Module complete all as specified and directed.

Supply & fixing including connection modular switch socket combination 2 in 1,5 pin 5 amps 3 modules complete all as specified and directed.

Supply & fixing including connection modular switch socket combination 2 in 1, 6 pin 16 amps 3 modules complete all as specified and directed.

Supply & fixing including connection modular socket outlet 2 /3 pin 6 Amps 2 modules complete all as specified and directed.

Supply & fixing including connection modular socket outlet 2 /3 pin 6/16 Amps 2 modules complete all as specified and directed.

Supply and fixing white modular cover plate with frame 1 Module complete all as specified and directed.

Supply and fixing white modular cover plate with frame 2 Module complete all as specified and directed.

Supply and fixing white modular cover plate with frame 3 Module complete all as specified and directed.

Supply and fixing white modular cover plate with frame 4 Module complete all as specified and directed.

Supply and fixing white modular cover plate with frame 6 Module complete all as specified and directed.

Supply and fixing white modular cover plate with frame 8 Module complete all as specified and directed.

Supply and fixing modular metal flush box 1/2 Module complete all as specified and directed.

Supply and fixing modular metal flush box 3 Module complete all as specified and directed.

Supply and fixing modular metal flush box 4 Module complete all as specified and directed.

Supply and fixing modular metal flush box 6 Module complete all as specified and directed.

S&F in repair LED type Bulk Head fitting e TARTA 6 W engineering plastic housing with prismatic diffuser all as directed.

S&F in repair LED type intigrated batten fitting T5 Nakshatra Series indoor decorative aluminium extructed fitting 20 W 4FT white all as directed.

Material and labour preparation to old painted surface of storage water heater of 25 ltr capacity and painting with two coats of synthetic enamel paint (white) by using spray gun complete all as specified and as directed.

Supply and fixing as in replacement for copper container suitable for Geyser 25 ltr complete all as specified and as directed.

Taking down ceiling fan of any type, any make and any sweep for repairing, opening the body and blade, checking for repalcement of unserviceable minor spares like nut,bolt,bush,clamp & down rod as required and cleaning, overoiling, greasing, replacement of unserviceable spare by new one, re-assembling of all components in original position, testing and hanging up the same complete all as specified and as directed. Note : New spare parts required for replacement shall be measured and paid seperately as 'Supply only"

Supply only Ball bearing of size 6201/6202/6203 for ceiling fan of 1200/1400mm Sweep complete all as specified and as directed.

Supply only as in replacement 2.5mfd capacitor complete all as specified and as directed.

Supply only as in replacement 3.5mfd capacitor complete all as specified and as directed.

Material and labour for painting of ceiling fan of size 1200mm & 1400mm sweep including down rod upto 2.00 mtr long with two coats of synthetic enamel spray white paint including preparation old painted surface including writing of MES No with letters n exc 15cm height complete all as specified and as directed.

Rewinding of ceiling fan, 1200mm and 1400mm sweep with synthetic enamel copper wire including insulation of starter with polyster paper/manllex paper with cotontak binding, heat varnished and complete all as specified and as directed.

Taking down exhaust fan of any type, any make and any sweep for repairing, opening the body and blade, checking for repalcement of unserviceable minor spares like nut,bolt,bush,clamp & down rod as required and cleaning, overoiling, greasing, replacement of unserviceable spare by new one, re-assembling of all components in original position, testing and hanging up the same complete all as specified and as directed. Note : New spare parts required for replacement shall be measured and paid seperately as 'Supply only"

Supply only Ball bearing 2001/ 2002/ 2003 for exhaust fans complete all as specified and as directed.

Rewinding of exhaust fan of 230mm sweep with synthetic enamel copper wire including insulation of starter with polyster paper/manllex paper with cotontak binding, heat varnished and complete all as specified and as directed.

All as per item No. 2.51 above but for exhaust fan of sweep exc 230mm but n exc 450 mm.

Supply and fixing as in replacement M.S. galvanised louvers suitable for exhust fan of size 300/230mm sweep complete all as specified and as directed.

M/s R.C REFRIGERATION

DANWAR AND ASSOCIATES

M/SNeelachal Enterprises

CLASSIC CONSTRUCTION AND SUPPLIERS

DS ENTERPRISES

M/S JANAKI ENTERPRISES

Bidder Name

DS ENTERPRISES

M/s R.C REFRIGERATION

DANWAR AND ASSOCIATES

M/SNeelachal Enterprises

CLASSIC CONSTRUCTION AND SUPPLIERS

M/S JANAKI ENTERPRISES

bholanath bera