Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.3 LAccepted-AOC | L1 | Accepted-AOC Being L1. | |
| 2 | L2₹44.5 L+₹2.2 L (5.30%)Rejected-Finance | L2 | Rejected-Finance Higher bid value. | |
| 3 | L3₹45.1 L+₹2.8 L (6.70%)Rejected-Finance | L3 | Rejected-Finance Higher bid value. | |
| 4 | L4₹45.3 L+₹3.0 L (7.10%)Rejected-Finance | L4 | Rejected-Finance Higher bid value. | |
| 5 | L5₹45.4 L+₹3.1 L (7.35%)Rejected-Finance KHAWASNIWAS NEAR POLICE QTRDEORALI GANGTOK SIKKIM | L5 | Rejected-Finance Higher bid value. |
Tender Value
Refer Docs
EMD Value
₹84,500
Closing Date
3 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Gangtok
GE Gangtok New Mil Stn Gangtok, Sikkim PIN-737102
ADDN/ALTN TO SINGLE OFFRS ACCN AT NEW MIL STN GANGTOK UNDER GE GANGTOK
2023_MES_618156_1
8177/A//E8
Open Tender
Civil Works
Works
182 days
GE Gangtok New Mil Stn Gangtok
As per tender documents
8 documents required · 8 mandatory
₹500
GE Gangtok
₹84,500
Yes
27 Oct 2023
11 Sept 2023
5 Oct 2023
11 Sept 2023
3 Oct 2023
19 Sept 2023
Amount
Dismantling old PGI/CGI sheeting of any gauge thickness, including Nainital Sikkim or similar pattern in roof/facia etc complete all as specified and directed.
Taking down cement plaster of any description on brick or stone walls incl raking out joints hacking for key, scrubing down with water etc. complete all as specified and directed.
Raking out joints/ pointing to brick work in walls or squared rubble masonry, coursed / uncoursed all as directed complete.
Demolition to cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Demolition of concrete of any description and in any position not otherwise specially provided for complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for complete all as specified and directed.
Dismantling wall and ceiling board (fibre pulp, insulation etc) or insulation boards any thickness including cover fillets complete all as specified and directed.
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removal of dismantled materials/rubbish from site complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area n.exc 1.5 sqm all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) each area exc 1.5 sqm nut n.exc 4Sqm all as specified and as directed.
Taking down shuuter exc 1 sqm and n exc 2 sqm all as specified and as directed.
M&L for 75mm thick PCC type C2 1:3:6 (using 40mm graded stone agg) as in plinth protection/Path/hardstanding finished the concrete surfaces even and smooth without using extra cement etc complete all as specified and directed.
M&L for 25 mm thick PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in sub base of floor complete all as specified and as directed.
S&F 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheets of any colour and any pattern as approved having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as in roof complete all as specified and directed by the Engr-in-Charge
S&F 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheets of any colour having tensile strength of 550 Mpa as in ridges, valley, eaves, etc fixed with self tapping screws complete all as specified and directed.
M&L for pre cast cement concrete block masonry with solid blocks, exc 10 cm in width and setting in cement mortar 1:6 type C1, (1:3.6) (using 20 mm graded stone aggregate) as per IS 383 complete all as specified and as directed.
M&L for 20mm thick rendering in cement plaster in CM (1: 4) in two layer and top layer 10mm thick shall be mixed with WPC @ 3% by weight of cement on fair faces of stone masonry wall incl finish the surface even and fair without using extra cement complete all as directed and specified (WPC shall be measured and paid separatly)
Supply only Integral waterproofing compound complete all as specified and as directed.
M&L for Flush painting in cm(1.4) to block in course or ashlar masonry or concrete block walling all as specifed and directed.
M&L for 15 mm thick rendering plaster on fair faces of conc faces/ brick wall faces of smooth without extra cement in CM 1.6 complete all as specified and as directed.
M&L for for applying two coat of exterior acrylic emulsion weather proof paint over coat of primer on new/old plasterd surface including preparation of new plasterd surface etc complete all as specified and directed.
M&L for applying three coats of white wash on new plastered wall surface including preparation of new and previously untreated surfaces of wall complete all as specified and directed.
M&L for applying two coats of white wash on old plastered wall surface including preparation of old surfaces of wall complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls applying two coats of distemper, oil emulsion, white or tinted over new wall suface on a coat wall care putty complete all as specified and directed.
M&L for preparation of complete removal of existing treatement on old plastered surfaces of walls and applying two coats of distemper, oil emulsion, white or tinted over old wall surface including provision of a coat of 2mm thick wall care putty complete all es specified and directed.
S&F powder coated grid frame work for false ceiling comprising of the following sections for making partitions of 600 x 600mm size fixed to walls with rawl plugs & screws and hanged to roof with and including 1mm dia Gl wire suspenidor of suitable length and butterfly clips, size of main tee shall be 28mm x 23mm x 0,3mm thick, cross tee shall be 24mm x 23mm x 0.3mm thick and wall angle shall be 20mm x 20mm x 0.3mm thick complete all as specified and as directed.
M&L 4 mm thick E-board for insulation and accoustic purposes, 595 x 595 mm in size.fixed with staple on snap gird as in ceiling with and including dusting of surface and applying two coats of oil bound distemper over a coal of primer complete all as specified as as directed.
All as per item No 28 above but openable/fix type window/ ventilator complete all as specified and directed.
M&L for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded on chamfered put together with glue pinned and joints.
M & L for 2nd class hard wood timber scantling of any size or in any position such as truss purlin etc and if in repairs, to replace old and decayed timber (including piecing scarfing, etc, of old and new timbers if required) and removing defective portions to store complete all as specified and directed.
Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing
S&F Factory made solid panel pace door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawings
S&F 2nd class Flush shutters 35mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as spd and direvcted by Engr in Charge
Supply and fix 2nd class Plain framed, panelled shutter (two panel) 35mm thick with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated all as spd and directed by Engr in Charge.
S&F 35mm thick 2nd class Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted complete all as specified and as directed.
M&L for 2nd class Plain fillets, square, rectangular or triangular in section, clean sawn, of sec area exc 6 & n.exc 13 Sqcm secured with nails or brads complete all as specified and as directed.
S&F MS butt hinges 100mm long complete.
All as per Item No 38 above but 75mm long complete.
S&F 150mm long Aluminium, anodised, barrel tower bolts of extruded section complete.
All as per item No 40 above but 100mm long complete
S&F 150mm long Aluminium handles, cast type, anodised complete.
All as per item No 42 above but 100mm long complete
S&F 250 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and foxing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium complete all as specified and as directed
M&L preparation of new or previously untreated wooden surfaces of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.
S&F in repair Mild Steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors ladders; framed balusters; walk ways, railings; framework of water tanks and similar work con-forming to Fe 290.Gde-E-165 incl taking down old scrap iron grill complete all as specified & as directed.
M&L for preparation of new or previously untreated steel surfaces of any description nor otherwise described, over 10 cm width or girth and applying two coats synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
M&L for preparation of old or previously treated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamal paint complete all as specified and directed
S&F stainless steel wire mesh 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified.
S&F as in repair stain less steel wire mesh 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified.
M&L preparation of old or previously treated wooden surfaces of any description over 10 cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.
S&F and in repair 2nd class hard wood Weather boarding, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps with nails etc complete all as specified and as directed.
M&L for PCC 1.3.6 type C2 using 40mm graded stone aggregate as in surface channels/drain including forming fair finished to drain channel.complete all as specified and as directed.
Roughening surfaces of old concrete floor or wall surface by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed.
M&L for hard core of gauge n.exc .63 mm deposited spead, levelled, watered well rammed to a uniform surface n.exc 15 cm thick using broken stone or boulder complete all as specified and as directed.
M&L for Plain Cement concrete 100mm thick type B-2, 1:2:4 (40mm graded aggregate) as in hard stand path etc including finish the surface even and fair without using extra cement complete all as specified and as directed
M&L for lacquer coated precast chequered cement concrete tiles floor of size 200 x 200x 25mm/300 x 300 x 25mm thick set and jointed in grey cement pigment to match over 15mm thick screed in CM (1:6) complete all as specified and directed
Excavation in trenches not exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out as in soft/loose soil for foundation etc complete all as directed.
M&L for PCC 1:3.6 type C2 (40 mm gradede aggregate) as in foundation and mass concrete complete all as directed.
M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement moratar (1:6) complete all as directed.
M&L for PCC 1:3:6 type C1 (20 mm gradede aggregate) as in coping, bed plates parepet,plinth course including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed.
Returning, filling in soil Back filling of retaining walls using approved earth obtained from excavation incl watering, well ramming, etc complete all as directed.
Removing excavated soil to a distance n.exc.50m complete all as directed.
M&L for non skid ceramic coloured tiles 7mm to 8 mm thick(square/rectangular) area of each tile exceeding 0.11Sqm, but not exceeding 0.36 Sqm, in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete all as spfd & directed.
M&L for glazed coloured (300 x 450 mm/250 x 350mm) x 7 mm th as in skirting/dado over & including 10 mm th rendering in CM 1:4 set & jointed in neat cement sullry & pointed in white or coloured cement to match complete all as spfd & directed.
S&F vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in CM(1:6) all as spd and directed.
Ditto all as item No 66 above but on vertical surface of wall like skirting/dado etc on 15mm thick rendering complete.
M&L for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15mm thick screed in CM 1:6 etc complete all as specified and directed.
M&L for RCC type B1 1:2:4 (using 20 mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, cover slab, balconies, canopies, deck slabs and in shelves and the like complete all as specified & as directed NOTE: Re-inforcement shall be measured and paid separately.
M&L mild steel bars 10 mm dia & over cut to length bent to shape required, including cracking, bending spirally to proper for columns, hooking end & binding with and inch mild steel wire not less than 0.9mm dia or securing with clips quality conforming to TMT bars complete all as specified and directed
M&L for MS bars 5 mm dia and over upto and including 10 mm dia in stirrups cut to length, bent to shape required incl cranking bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire(annealed) not less than 0.9mm dia quality conforming to TMT bars complete all as specified and directed.
M & L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as spfd and directed.
M & L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick etc complete all as specified and directed
S&F 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice famination & other side balancing white lamination, fixed with screw as in cup boards, shelves etc all as directed by Engr In Charge.
Taking down 15mm dia steel tubing and connections, including cleaning and refixing or removal to store complete all as directed.
Taking down 20mm dia steel tubing and connections, including cleaning and refixing or removal to store complete all as directed.
S&F galvanised steel water tubing 15 mm bore, medium grade with all fittings and fixed complete to walls/ceiling or laid in floors complete all as directed by the Engr-in-Charge.
S&F galvanised steel water tubing 20 mm bare, medium grade with all fittings and fixed complete to walls/ceiling or laid in floors complete all as directed by the Engr-in-Charge.
Refixing of old 15mm bore steel tubing as obtained from item No 75 above and connections in new or old position (wall, ceiling or floor, etc) complete all as directed.
S&F in repair, 10 litre capacity low level PVC flushing cistern (white), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete all as specified and as directed.
S&F white vitreous china wash down water closet pan (pedestal pattern) EWC, of size 520 x 360 x 390 mm with 'P' or 'S' trap, including fixing bolts, Plastic water closet seat and cover, closed pattern with flat bottom, and mild steel chromium plated or aluminium anodised hinging device, making all necessary connections and making good the disturbed surfaces of floor complete all as specified and as directed.
S&F in repairs vitreous china, white colour, flat back, wash hand basin of size 550 x 400mm fixed with brackets, including providing 32 mm dia PVC waste pipe, 32 mm bore CP waste coupling and making all necessary connections complete as directed.
S&F in repairs 15 mm pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs complete all as specified and directed
S&F cromium plated central hole basin mixer Extended casted spout with 450mm long braided hoses Make Essco cat part no: DLX-516KN or equivalent as specified.
S&F and in repair cromium plated wall mixer 15mm bore with 115mm long bend pipe for connection to over head shower (with Bush & piston diverter fittings) with aerator screwed down for 15mm bore GI Pipe or for brass ferrule. Make Essco ACT PART NO SQT-517BKN or equivalent as specified.
S&F in repair Bib tap, long body cast copper alloy, chromium plated with crutch or butterfly handle, screwed down for 15mm bore GI Pipe or for brass ferrule including taking down old unserviceable one.
S&F in repair two way Bib tap, long body cast copper alloy, chromium plated with crutch or butterfly handle with healthfuceset, screwed down for 15mm bore GI Pipe or for brass ferrule. Make: Essco Cat part No SQT-512AKN or equivalent as specified.
S&F in repair corner glass shelf 225x 225mm with CP steel frame complete all as specified and directed.Make CERA cat part NO: F5005102 or equialent as specified.
S&F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, including fixing to steel pipe or union Complete all as specified and as directed.
S&F in repair Angular Stop Cock with flang Make Cera CAT No: QTF2006201/HTF3001201 or equivalent as specified.
S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as directed.
S&F CP tubular towel rail 20mm dia D tupe 60cm long complete.
S &F Stainless steel towel ring round Make Essco: cat part No AEC-1221N or Equivalent as specified.
S&F soap dish cromium plated body and Polycarbonate brackets including wall flange and screws etc Make Essco cat part No AEC-1133 or equivalent as specified.
Supply & fix in Repair 75 mm dia PVC floor trap of outlet, with gratings, including jointing to waste pipe fixed in PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) complete all as specified and as directed.
S&F 110mm bore, PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or under floors, fixed on walls with necessary clips complete all as specified and as directed.
upply and fix 110 mm bore PVC (SWR) bend of any radius for PVC (SWR) pipes, fixed to walls or fixed to steel gutter complete all as directed.
Supply and fix 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as directed.
S&F 75mm bore, PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed on walls with necessary clamps etc complete all as specified and as directed.
Supply and fix 75mm bore PVC (SWR) bend of any radius for PVC (SWR) pipes, fixed to walls complete all as directed.
Supply & fix in repair 110 mm bore PVC (SWR) vent cowl fixed in position complete all as specified and directed.
Supply and fix 75 mm bore PVC (SWR) junction single (Single T) equal or unequal complete all as directed.
S&F 150mm bore, PVC (SWR) pipes, single socketed in any length with rubber ring joints laid in trenches or under floors, fixed on walls with necessary clips complete all as specified and as directed.
Supply and fix 150 mm bore PVC (SWR) bend of any radius for PVC (SWR) pipes, fixed to walls or fixed to steel gutter complete all as directed.
S&F Rolled section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleat or other connecting plates confirming to Fe-410-W (Gde-E-250) complete all as specified and as directed.
Dismantling water tanks exc 500 ltr and n.exc 1000 ltr capacity and removing to store complete all as specified and directed.
Supply & fix Rotational moulded polyethylene water storage tank, 1000 litres capacity, ISI marked multi layer constriction (cylindrical vertical with closed top) ISI Marked, hoisted & fixed in position including supply and fixing of 25mm bore Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe of having weight not less than 142/210/455 gms including connection complete all as specified and as directed.
S&F Gun-metal, globe or gate valves, 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete.
S&F decorative type curtain rod chromium plated 25mm dia with fixing blackets,stops and complete fittings including making good the surface were damaged all as directed by Engr In charge.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, inlcuding fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and as directed.
M & L concealed for point wiring with 1.5 Sqmm (FRLS) PVC isulated, single core, unsheathed, multi strandared 1100 volts grade, copper conductor cable drawn through and including PVC rigid non metalic condit of external dia not less than 20mm dia on ceiling/wall and including continous 1.5 Sqmm PVC insulated single core multi strandered copper condutor cable as earth continuity conductor connected to common earth dolly for one light/exhaust fan/ one 3 pin 5 amps switch socket outlet controlled by one, one way switch and including metal sheet enclosure rectangular terminal boxes of suitable sizes and modular white cover plates suitable for mounting modular switches, socket etc all as specified and as directed. Note:- Quoted rate shall include chase cutting, making good to the distured surfaces including plastering and painting to much with the existing colour.
All as per item No 111 here-in-before but for one Exhaust Fan Point controlled by one switch.
All as per item 112 here-in-before but for one socket outlet/metal clad socket of 15 Amps fixed on independent board with 2.5 Sqmm multistandard copper conductor wire FRLS PVC insulated and 2.5 Sqmm copper conductor wire FRLS PVC insulated using as earth wire complete all as spcified and directed by Engineer-in-Charge
All as per item 112 here-in-before but for one socket outlet/metal clad socket of 15 Amps fixed on independent board with 4 Sqmm multistandard copper conductor wire FRLS PVC insulated and 4 Sqmm copper conductor wire FRLS PVC insulated using as earth wire complete all as spcified and directed by Engineer-in-Charge
Supply and fix modular switch 1 way 6 A, 1 module 230 Volts, 50 Hz, ISI marked all as specified and as directed. (Make : Havells Cat No AHFSXXW101 or equivalent in list of make)
Supply and fix Modular bell push 1 Way 6 A, 1 module 230 Volts, 50Hz, ISI marked all as specified and as directed.
Supply and fix socket 2/3 pin comibined 2 module 230 Volts, 50 Hz, ISI marked all as specified and as directed. Make Havells Cat No AHFKPXW065 or equivalent in list of make.
Supply and fix Modular switch 1 way 16 A, 1 module 230 Volts, 50Hz, ISI marked all as specified and as directed.
Supply and fix Socket, 6A/16A- 2/3 pin combined 2 module 230 Volts, 50Hz, ISI marked all as specified and as directed.
Supply and Fix Bell Multi Music type complete all as specified and directed.
S&F ceiling rose, PVC/polycarbonate insulated body, 3 terminal and 240 volts, (ISI marked) surface bakelite suitable for battern fitting complete all as specified. (Make : Havells Cat No AHLHXCW000 or equivalent in list of make)
Supply & fix LED Wall light along with fixture, 20 watts with suitable foxing arrangements complete including 01 No LED lamp E27 Cap with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size all as specified and as directed.
upply & fix LED tube light batten 1X120W with suitable fixing arrangements complete with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size all as specified and as directed.
Supply and fixing LED light fitting 1x9W/1x10W bulk head luminairies including LED light driver holder connecting connecting up with three core flexible copper flexible copper conductor cable of suitable size complete all as directed.
Supply & fix LED Mirror light along with facture, 5 watts with suitable fixing arrangements complete with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size all as specified and as directed.
S&F Exhaust Fan 300 mm Sweep. 1400 RPM, 240 Volt, AC 50 HZ. Steel body, including lovers with and including cutting bricks/stone boulders wall for fixing of fan and finished the cutting surface even and smooth by using cement mortar complete all as specified and directed.( Make:- Havells Ventil Air DX White or equivalent as per list of make.
S&F Exhaust Fan 250 mm Sweep. 1400 RPM, 240 Volt. AC 50 HZ, PVC body, including lovers with and including cutting bricks/stone boulders wall for fixing of fan and finished the cutting surface even and smooth by using cement mortar complete all as specified and directed.(Make:- Havells Ventil Air DX White or equivalent of as per list of make.
Supply, install, testing & commissioning of electric water heater in repairs, storage vertical type, 5 star rated, 25 ltr capacity comprising of high wattage heating element for instant heating, extra thick inner tank of superior grade, rust & shock proof outer body, non-ferrous pressure plate with & incl provn of 04 Nos grouting bolts suitably flushed to wall or any other surface incl Hot & cold water pipe for geyser inlet and outlet connection & electric connection with 3 core PVC insulated, sheathed, standed copper conductor cable/flexible chord complete all as specified and as directed. Make-Havells Cat No-GHWAMGTWH025 or is equivalent in Crompton/Bajaj
Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps all as specified.
S&F Sheet metal enclosure DB's 240 Volts, IP-43, suitable for mounting MCB's, SPN, 12 way with 200 Amps rated copper bus bar double door type complete all as specified and as directed.
S&F MCB single pole & neutral 40 to 63 Amps, 240 Volts, 10 KA rapturing capacity. 'C' Curve complete all as directed by Engineer-in-charge.
S&F MCB single pole 6 to 32 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as directed by Engineer-in-charge.
Material & Labour for Sub Main Wiring with two run single core 6 Sqmm PVC insulated unsheathed (FRLS) cable with stranded copper conductor drawn in PVC conduit & accessories Suitable size with and including 6 Sqmm copper green colour earth wire all as specified and directed by Engineer-in- Charge. NOTE-two run of 6 sq.mm & One run of 6 sq.mm & One run of PVC conduit with accessories shall be measured as One length.
M & L for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less 1.5 mtr deep below normal ground level connected to GI earth wire 4 mm dia connected to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, Gl earth wire will be protected by 15 mm dia Gl pipe 'light grade', watering pipe 20 mm dia GI 'Medium grade', Gl wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continious earth wire on pole, testing the earthing after completion all as specified and shown in electric plate No 3 of MES SSR Part-1 1991 print and as directed.
RAAJ BANGAR
KARMA TSETEN BHUTIA
M/S ANIL KUMAR THAKUR
M/S S. S CHETTRI AND SONS
BIJAY MITTAL
SANJAY KAUSHIK
KARMA SHERPA
MAHENDRA KHAWAS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .