Construction of 33 KV 11 KV Line

Amount

Part A Particulars

33 KV feeder Pillar box

33 KV ‘XLPE’ C/J Kit 3x300mm² Outdoor

33 KV ‘XLPE’ C/J Kit 3x300mm² Straight Through

Top channel with clamp

M.S. Angle Iron 65x65x6mm bracing.

33 KV M.S. bracing Angle clamp with nut bolt (Top side) for ST Pole 9/11 mtr with nut bolt by 50x8 mm MS flat Iron make

33 KV M.S. bracing Angle clamp with nut bolt (Bottom side) for ST Pole 9/11 mtr with nut bolt by 50x8 mm MS flat Iron make

extra support angle for cable support

clamp for extra angle

Number Plate with clamps.

Danger Board with Clamps.

Barbed wire.

Allumunium Paint.

Bolts, Nuts, & Washers.

Red Oxide Paint.

33 KV Stay rod.

33 KV ST pole Stay clamp

Stay wire

Earthing rod

GI wire

Special GI Pipe for cable earthing

33 KV E bracket

Part B Work Shifting, Loading Carriage & Unloading of following materials from store centre Gorakhpur to work site

Petty Stock Materials.

33 KV Line Isolator

33 KV Line Isolator Structure

33 KV ‘XLPE’ Cable 3x300mm²

ST Pole 9 M Long

ST Pole 11 M Long

ACSR Dog conductor

33 KV Polymer Pin Insulator

33 KV Polymer Disc Insulator B&S

33 KV Polymer Disc Fitting

Laying of 33 KV 3x300 mm² ‘XLPE’ cable(S/C) by digging pit & making trench in Proper size (1.2M depth x1.2M wide) below ground level by fixing bricks(4½˝) on both side of trench wall and 9˝ brick work at the centre of the trench along the cable. Fixing brick slab on top after filling sand around both the cable including cost of bricks and sand/ as per site requirement HDD mathod can be used. (Include temporary cable when laying as permanent cable)

Extra cost for drilling horizontal hole 3 Mtr below the road & inserting 6” dia. HDPE Pipe PN-8 as per RESSPO for passing of 33 KV XLPE cable 3x300 mm². (Pipe and related materials provided by contractor)

MS cable hanger (made by 65x65x6 mm MS Angle) size with fastener clamp with installation charges including of all materials as per required size of RESSPO as per current market rate.

Open Cable Duct slab & laying of 33 KV 3x300 mm² ‘XLPE’ cable(S/C) in Cable trench (Cable trench already constructed by PWD from Gorakhpur - Sonauli Road) with proper Laying on cable hanger.

Jointing charge of 33 KV ‘XLPE’ C/J Kit 3x300 mm² Outdoor/Straight Through.

Laying of 33 KV ‘XLPE’ cable in air after providing 6” dia.M.S. pipe 3m long Complete work.

Labour charges for inserting of MS Pipe, Rising of 33 KV cable and jumpering complete work.

Special Pipe earthing for 33 KV Jointing Kit.

There will be possible of breaking of various type of water supply pipe while laying of U/G cable, for which the repair will be charged. (Include complete materials and work) (01 Job =01 break).

Extension of 04 mtr extra with 11 Mtr ST Pole (11+4=15Mtr) as per site requirement

Extra work for Dismantle 11 mtr ST Double Pole of 33 KV Durgabadi and Surajkund line and jumpers.

Making plinth, Installation of 33 KV Feeder Pillar Box, Earthing and respective all connection.

Grouting of stay rods (20 x 1800) mm including all work of excavation, cement concrete in size (0.60 x 0.60 x 0.30) m in ratio 1:4:8 cement, sand, 40mm brick ballast) as per drg including back filling, proper ramming etc. Fixing tightening & nozzling of stay wire with stay rod with the poles of required tension as per drawing.

Erection of Line Isolator Structure and install Line Isolator and earthing complete work.

ARK ENGINEERING

M/s Anil kumar singh