Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.6 LAccepted-Finance | ₹13.6 L | L1 | Accepted-Finance ok |
| 2 | L2₹13.8 L+₹19,621.49 (1.44%)Accepted-Finance | ₹13.8 L+₹19,621.49 (1.44%) | L2 | Accepted-Finance ok |
| Sl No | Description | Qty | Unit | Radiant Engineers L1 | TRIVENI UDYOG L2 |
|---|---|---|---|---|---|
| 1.00 | Providing Hight Strength Thread Locker (Anaerobic Di methacrylate ester) having atleast the following properties:
Breakaway torque (M10): ≥ 26 Nm, Temperature resistance: –55°C to +180°C, Fixture time: ≤ 10 min, works on active metal but also on passive substrates, Prevailing torque (M10): ≥ 32 Nm | 2 | Ltr. | 46,296 ₹54,629.28 Lowest | 46,758 ₹55,174.44 |
| 2.00 | Providing High Strength Bearing retainer (Urethane methacrylate anaerobic adhesive) having atleast the following properties
Gap filling capability: up to 0.25 mm, Shear strength (steel): ≥ 28 N/mm², Works on active & passive metals, Temperature resistance: –55°C to +180°C | 2 | Ltr. | 46,296 ₹54,629.28 Lowest | 46,758 ₹55,174.44 |
| 3.00 | Providing Low Viscosity Instant adhesive (Ethyl cyanoacrylate adhesive) having atleast following properties
Viscosity: 12–22 cP, Very fast fixture: ≤ 5 sec on plastics & rubber, Lap shear strength (steel): ≥ 15.5 N/mm², Temperature resistance: –40°C to +120°C | 1 | Kg | 25,950 ₹30,621 Lowest | 26,209.5 ₹30,927.21 |
| 4.00 | Providing High Temperature RTV Silicone (Acetoxy silicone sealant) having atleast following properties
High temperature resistance: up to 315°C, Shore A hardness: ≥ 18, Elongation at break: ≥ 300%, Tensile strength: ≥ 1.5 N/mm², Peel strength on metal: ≥ 1.73 N/mm | 8,500 | Gm | 42,925 ₹50,651.5 Lowest | 48,450 ₹57,171 |
| 5.00 | Providing of Graphite-based non-metallic anti-seize having atleast following properties
Penetration: 310–360 (1/10 mm), Torque coefficient K: 0.13 (lubricated bolt), Temperature range: –29°C to +482°C, Good conductivity across threaded joints | 10 | Lb | 42,460 ₹50,102.8 Lowest | 42,884.6 ₹50,603.83 |
| 6.00 | Providing of Fast Set Steel Putty having atleast following properties
Gel time: 3.5–4 min, Tensile strength: ≥ 27 N/mm², Compressive strength: ≥ 51 N/mm², Shore D hardness: ≥ 80, Operating temperature: –30°C to +95°C | 4 | Kg | 47,240 ₹55,743.2 Lowest | 47,712.4 ₹56,300.63 |
| 7.00 | Providing of Penetrating oil having atleast following properties
Specific gravity: 0.83, Must loosen rust-locked nuts/bolts, Displaces water & moisture, Removes rust, dirt, oxidation, Provides temporary corrosion protection | 13.6 | kg | 51,000 ₹60,180 Lowest | 51,510 ₹60,781.8 |
| 8.00 | Providing of Electrical contact cleaner having atleast the following properties
Zero residue formulation, Removes moisture, dust, oils & oxides, Safe on metals & most plastics, Must restore electrical continuity | 12.5 | Ltr. | 47,900 ₹56,522 Lowest | 48,379 ₹57,087.22 |
| 9.00 | Providing of Superior metal Epoxy (Ferro-silicon filled heavy-duty epoxy) having atleast the following properties
Tensile strength: ≥ 27 N/mm², Compressive strength: ≥ 134 N/mm², Shore Hardness : ≥ 86 N/mm², Abrasion resistance ASTM D4060 : not more than 127 mg, Temperature resistance: up to 120°C | 6 | Kg | 86,388 ₹1,01,937.84 Lowest | 87,251.88 ₹1,02,957.22 |
| 10.00 | Providing of Floor Repair Epoxy having atleast the following properties
3-component, 100% solids epoxy mortar, Volume shrinkage: ≤ 0.66%, Compressive strength: ≥ 90 N/mm², Shore D hardness: ≥ 80, Temperature resistance: –30°C to +120°C, Self-levelling formulation | 300 | Kg | 7,17,000 ₹8,46,060 Lowest | 7,24,170 ₹8,54,520.6 |
Tender Value
Refer Docs
EMD Value
₹27,500
Closing Date
13 Mar 2026, 3:30 pmClosed
Kuldeep Yadav
Chandrawal Water Works-I, Civil Lines, Delhi-110054
Improvement in track path of various clarifiers by providing various types adhesives and chemical components for the maintenance of various E and M equipment
2026_DJB_288186_3
NIT No. 21 (2025-26)
Open Tender
Repair and Maintenance Works
Item Rate
30 days
Chandrawal Water Works-I
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
Delhi Jal Board
₹27,500
19 Mar 2026
6 Mar 2026
13 Mar 2026
6 Mar 2026
13 Mar 2026
6 Mar 2026
6 Mar 2026 - 13 Mar 2026
Providing Hight Strength Thread Locker (Anaerobic Di methacrylate ester) having atleast the following properties: Breakaway torque (M10): ≥ 26 Nm, Temperature resistance: –55°C to +180°C, Fixture time: ≤ 10 min, works on active metal but also on passive substrates, Prevailing torque (M10): ≥ 32 Nm
Providing High Strength Bearing retainer (Urethane methacrylate anaerobic adhesive) having atleast the following properties Gap filling capability: up to 0.25 mm, Shear strength (steel): ≥ 28 N/mm², Works on active & passive metals, Temperature resistance: –55°C to +180°C
Providing Low Viscosity Instant adhesive (Ethyl cyanoacrylate adhesive) having atleast following properties Viscosity: 12–22 cP, Very fast fixture: ≤ 5 sec on plastics & rubber, Lap shear strength (steel): ≥ 15.5 N/mm², Temperature resistance: –40°C to +120°C
Providing High Temperature RTV Silicone (Acetoxy silicone sealant) having atleast following properties High temperature resistance: up to 315°C, Shore A hardness: ≥ 18, Elongation at break: ≥ 300%, Tensile strength: ≥ 1.5 N/mm², Peel strength on metal: ≥ 1.73 N/mm
Providing of Graphite-based non-metallic anti-seize having atleast following properties Penetration: 310–360 (1/10 mm), Torque coefficient K: 0.13 (lubricated bolt), Temperature range: –29°C to +482°C, Good conductivity across threaded joints
Providing of Fast Set Steel Putty having atleast following properties Gel time: 3.5–4 min, Tensile strength: ≥ 27 N/mm², Compressive strength: ≥ 51 N/mm², Shore D hardness: ≥ 80, Operating temperature: –30°C to +95°C
Providing of Penetrating oil having atleast following properties Specific gravity: 0.83, Must loosen rust-locked nuts/bolts, Displaces water & moisture, Removes rust, dirt, oxidation, Provides temporary corrosion protection
Providing of Electrical contact cleaner having atleast the following properties Zero residue formulation, Removes moisture, dust, oils & oxides, Safe on metals & most plastics, Must restore electrical continuity
Providing of Superior metal Epoxy (Ferro-silicon filled heavy-duty epoxy) having atleast the following properties Tensile strength: ≥ 27 N/mm², Compressive strength: ≥ 134 N/mm², Shore Hardness : ≥ 86 N/mm², Abrasion resistance ASTM D4060 : not more than 127 mg, Temperature resistance: up to 120°C
Providing of Floor Repair Epoxy having atleast the following properties 3-component, 100% solids epoxy mortar, Volume shrinkage: ≤ 0.66%, Compressive strength: ≥ 90 N/mm², Shore D hardness: ≥ 80, Temperature resistance: –30°C to +120°C, Self-levelling formulation
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.80 MB
BOQ_382119.xls
BOQ • 0.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .