ADDITION ALTERATION AND RENOVATION WORKS IN KAVERI BUILDING AT DLRL HYDERABAD

Amount

Taking down chowkats or frame with shutters (without taking off shutters from frame) but each not exceeding 1.50 Sqm complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from frame) but each exceeding 1.50 Sqm but not exc 4 Sqm complete all as specified and directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube of 1.25 mm thickness complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) of wood grain finish consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed.

M&L for rectangular aluminium hollow section of size 101.6 mm x 44 mm x 2mm thick as in partition ( including fixing with nut and bolt in floor and wall by drilling holes), powder coated of approved colour for both vertical and horizontal member including 5.5mm thick glass, 12mm thick particle board prelaminated on both side, aluminium legs, aluminium glazing channel, rubber beading as required complete incl taking down old partition all as directed.

All as per item No 05 above but as in door, powder coated, approved colour, including 5.5mm thick glass, 12mm thick particle board prelaminted on both side, rubber beading, aluminium glazing channels, two Nos handle D type 250 mm long, one No. 200mm aluminium powder coated barrel tower bolt of extruded section, 100mm size brass mortice lock, 4 levers with two keys and one floor door spring per leaf incl taking down old door complete all as specified and directed.

S&F in repairs mild steel butt hinges medium weight, cold rolled 100mm size complete all as specified and directed.

S&F mild steel butt hinges, medium weight cold rolled 100mm size complete all as specified and directed.

S&F 150mm long aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed.

S&F in repair 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F in repair 150mm size extruded aluminium alloy handles fabricated type, anodised complete all as specified and directed.

S&F 150mm size extruded aluminium , alloy handles fabricated type, anodised complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolts 250mm long with hasp and staple ( bolt type) & fixing clips of sheet or extruded section & fixing bolts & sliding bolts of extruded section complete all as specified and directed.

S&F in repairs 300mm long aluminium alloy, anodised, sliding door bolt with hasp & staple ( bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified

S&F in repair floor door stopper 150mm of aluminium alloy body and tongue anodised with hard drawn steel spring complete all as specified and directed.

M&L preparation of old painted wooden surface of any description, not otherwise described, over 10cm width or girth applying one coat of synthetic enamel paint all as specified and directed.

M&L for preparation of old decorated wooden surfaces of any description not otherwise described over 10cm girth or width and applying two coats of French polishing complete all as specified and as directed.

S&F in repairs of aluminium (extruded section body) door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

S&F in repairs mortice lock, 4 levers vertical type , brass, size 75mm complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to stores and rubbish off the premises. all as directed.

M & L for coloured non skid ceramic tiles 9 to 10 mm thick (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles laid on & including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

S&F Glazed coloured ceramic tiles in vertical surface 450 x 300x 7 mm thick ,set and jointed in neat cement slurry and pointed in white or cloured cement 10mm thick backing coat CM of 1:4 complete all as specified and as directed.

M&L for Non-skid coloured ceramic joint free tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tile incl 15mm thick screed bed cement motar 1:6 complete all as specified and as directed.

All as per item No 23 above but on vertical surfaces such as skirting (skirting is to be flush with wall ) including 10mm thick rendering in CM 1:4 on fair faces of brick / concrete surfaces as backing coat for tiles complete all as directed.

Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in cement mortar complete all as specified and directed

Demolition of plain cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness below or above ground level, removal of rubbish and debris and depositing in low lying areas out side MD land complete all as directed.

M & L for Cement concrete type D2, 1:4:8 (using 40 mm graded stone aggregate) in mass concrete of sub base of flooring etc complete all as specified

M & L for Machine pressed precast concrete interlocking paver block with grey cement and pigments any shape and size confirming to IS 15658 - 2006 of 60 mm thickness, M - 35 Grade with grey cement and pigment over 50 mm thick sand cushioning complete all as specified

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of rubbish off the premises, removal and depositing serviceable materials where directed complete all as specified

Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed.

M & L rendering 10 mm thick in CM 1:4 on fair faces of brick work or concrete on ceiling , finished even and smooth without using extra cement complete all as specified.

M&L for Preparing newly plastered surfaces and applying two coats of distemper oil emulsion including priming plastered and other surfaces with alkali resistant primer on walls over a coat of wallcare putty to make surfaces smooth complete all as specified.

M&L for Complete removal of existing treatment and applying two coats of distemper oil emulsion including priming plastered and other surfaces with alkali resistant primer on surfaces of walls over a coat of wallcare putty to make surfaces smooth complete all as specified.

M & L preparing new plastered surfaces and applying three coats of white wash on ceiling complete all as specified.

M & L preparing old plastered surfaces and applying two coats of white wash on ceiling complete all as specified and directed.

M&L for PCC 1:2:4 type B0 ( using 12.5mm graded stone aggregate)as in cills, steps, seismic and other damp proofing courses, plinthcourses , water tank base, string courses, lacing courses, parapets and railing upto 60cm in height, coping etc complete all as specified and as directed.

Demolition of old existing unserviceable glazed WHB and S&F vitreous china wash hand basin white of size 550 x 400mm flat back excluding taps, waste china and plug but including brackets including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

S & F in repairs Vitreous wash down water closet pan (Pedestal pattern), (ETWC) white including plastic water closet seat, white, closed pattern with flat bottom, cover and mild steel chromium plated or aluminium hinging device and fixing bolts complete all as specified and directed.

S & F in repairs Vitreous China Half stall urinal White complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 40 mm dia CP waste coupling, CP brass urinal spreader , CP connection of suitable length and fixing with 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed. Cat Part No 96010 of Hindware or equivalent in Parryware/ Jaguar

S&F in repair vitreous china squatting pan 'Orissa pattern' size 580 x 440mm white , with integral foot rest, suitable CI trap including connection to trap, flushing pipe, antisyphonage pipe etc, including trap set in and including concrete and making good to floor complete all as specified and directed.

S&F in repairs 10 ltrs capacity, PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and directed.

M&L PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection, 75 mm thick, finished even and fair with joints 10 mm wide and in full depth at corners and @ 3m c/c filled with mastic mortar complete all as specified.

Taking up or down steel tubing and connections and S& F 15mm dia GI steel tubes, medium grade with all fittings and fixed complete to wall and ceiling or laid in floors all as specified and directed.

Taking up or down steel tubing and connections, and S & F 20mm dia GI steel tubes, medium grade with all fittings and fixed complete to wall and ceiling or laid in floors all as specified and directed.

S & F 1000 Ltrs capacity rotational moulded polyethylene water storage tanks double layered white (cylindrical vertical with closed threaded lid) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe pipe etc including dismantling old water tank complete all as specified and directed

S & F in repairs Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed bore dia of pipe 20mm complete all as specified.

S & F in repair 20 mm stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions , fixed complete all as specified

S&F in repairs 32mm dia PVC flexible waste pipe of length exceeding 60cm but not exceeding 90cm with connector suitable to connect the pipes with waste fitting/ coupling of WHB/ sink/ urinal complete.

S & F in repairs Brass Chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges complete all as specified.

S & F in repair health faucet, cast copper alloy chromium plated,including all necessary fittings complete all as specified.

S & F in repair 15 mm angle stop valves cast copper alloy, fancy type chromium plated, screwed down, high pressure with capastan head, screwed both ends for iron pipe or for unions fixed complete all as specified.

S&F in repair 15mm dia PVC water connection 450mm long with 2 Nos brass check nuts with washer complete all as specified

S&F in repair 15mm dia PVC water connection 600mm long with 2 Nos brass check nuts with washer complete all as specified

S & F in repair 15mm Bib taps, cast copper alloy chromium plated, fancy type with capastan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.

S & F in repair 15mm fancy type pillar tap cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes complete all as specified.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in stone, concrete block or slab wall complete all as specified.

Demolition of stone or brick masonry built in cement mortar or cement lime mortar incl all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified.

M & L Brick work with sub class ‘B’ bricks straight or curved on plan exc 6 mtr mean radius using old size brick built in CM 1:6 complete all as specified.

M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing of water proofing compound wherever required complete all as specified. Note: WPC will be measured and paid separately.

Supply only integral water proofing compound Make :- SCOTT /AQUA PROF/RAILIA

M & L for Preparation of new plastered surfaces and applying two coats of weather proof antifungal Acrylic Exterior emulsion paint of approved make and shade over a coat of approved primer as recommended by the manufacturer over a coat of putty to make surfaces smooth all as required and as directed.

M & L for complete removal of existing treatement and and applying two coats of weather proof Acrylic Exterior emulsion paint of approved make and shade over a coat of approved primer as recommended by the manufacturer over a coat of putty to make surfaces smooth all as required and as directed.

M & L brickwork with sub class B bricks straight or curved on plan exceeding 6m mean radius using old size bricks in half brick thick wall built in CM (1:4) complete all as specified.

S&F grating doom 125mm dia with waste hole of PTMT ( minimum weight 40 gms) complete all as specified.

S&F collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc as specified, erected in position and securing runners with holdfasts and brackets complete

Dismantling of existing AC/PVC soil and waste and rain water pipe 100mm dia including fittings,viz, bends , tee from walls, floor complete

Dismantling of existing AC/PVC soil and waste pipe 75mm dia including fittings,viz, bends , tee from walls/ floor complete

M & L for PVC (SWR) plain Floor trap of 75 mm dia., outlet with grating including jointing with solvent cement.

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches complete

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in floors or trenches complete

S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified.

S & F 110 mm bore PVC (SWR) Soil,rain water, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified.

S & F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete

S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete

S & F 110 mm bore PVC (SWR) Vent Cowl complete .

S & F 75 mm bore PVC (SWR) bends of any radius complete

S & F 110 mm bore PVC (SWR) bends of any radius complete.

Taking down existing unserviceable false ceiling of any description, thickness any position incl channels, sections, angles etc, complete all as specified and directed.

S&F aluminium anodised snap grid frame work for false ceiling grid size 605x605 mm with runners aluminium anodised main Tee of section 35x35x1.5 mm thick, cross Tee of section 25x25x1.5 mm thick and aluminium anodised angle of size 25 mm x 1.5 mm thick section fixed along side of wall including hanging from ceiling with 6mm dia GI wire (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified

M&L for providing 12mm thick Gypsum board ( 600 x 600mm) in ceiling fixed with screw as per manufacturers instructions and finished with two coats of plastic emulsion paint over a coat of primer on exposed surfaces complete all as specified.

S&F UPVC three track multicavity frame section 75mm x 64mmx23mm suitably reinforced with GI and glazed shutter fitted with 5mm thick tinted glass and sliding wire mesh shutter fitted with stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm. All sections of frame, sashes, transom and mullion shall be reinforced with G/J/U/O shape galvanised MS section considering structural / wind load requirement. All the corners/ mullion/ transom joints of the frame & sash shall be mitred cut fusion welded without any mechnical jointing all welded joints are neatly trimmed & feature grooved and raised nib finish so as to make the finish product free from all sharp edges & burrs. System shall have adequate drianage mechanism to permit the escape of water from horizontal member beneath in each unit shall be provided suitable UPVC beads for glazing and fitted with inner and outer EPDM weather seal gasket to be provided with proper operative and locking hardware mechanism, frame to be fixed to wall with high quality fasteners and silicon glue is to be applied to fill up gap between frame and wall to make leak proof all as specified and as per manufacturer instructions.

S&F UPVC fixed ventilator of white colour classic premium series incl 5mm toughened glass complete all as directed by Engr in Charge

S & F 10 mm thick Aluminium grill of make "Deco grill" ,DG - 104 model or any other equivalent approved make fitted into suitable size Aluminium channel , 'F' section and fixed to windows/ ventilators incl making provision for opening and closing the window shutter complete all as specified and directed.

S&F stainless steel grade 304 railing 68mm dia hand rail and 3 Nos 16mm dia horizontal rails and 40mm dia verticals at 900 mm centre to centre including 10 mm thick 40cm width toughned glass inbetween complete all as specified

S&F aluminium composite panel cladding work, composite material having total thickness 4mm with 0.50mm thickness aluminium skin exterior grade PVDF coating with necessary fittings / fixtures and hardware using U brackets made in GI wire as required and mounting on aluminium section 50x25x1.4mm thick tube bolted to the section to form grid for the cladding complete with weather silicon alongwith the PU foam and all cladding done in tray system or stick system as required complete all as specified and as directed.

S&F brass cutting letters of size 300mm high and 25mm wall thickness, Appolex laquer coated including soldering with lead buffing and colouring with standard colour ISI standard, MRF brand fixed on existing ACP/ any type of wall surfaces with brass bolts and nuts complete all as directed.

S&F brass DRDO logo round of size 600mm high and 25mm wall thickness, on and including circular brass sheet engraving complete logo, Appolex laquer coated, including soldering with lead buffing and colouring with standard colour ISI standard, MRF brand fixed on existing ACP/ any type of wall surfaces with brass bolts and nuts complete all as directed.

M & L for 18 to 20 mm thick Granite work lakha red (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing white cement (1:2) using marble dust with admixture of pigment to match the shade of granite including cutting grooves and nosing including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for 18 to 20mm thick polished granite work lakha red machine cut, in risers, skirting /dado fixed over 10mmthick rendering in CM 1:4 as backing coat and jointecd with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone,complete all as specified.

S&F solar control film 25 micron reflective type sticked to glass panes as per instruction of manufacturer complete all as specified and directed by Engr -in-Charge. (Make :- Gareware sun control or equivalent)

Taking down carefully of any type point wiring light fans socket or power complete fitting such as switch ceiling roses, pendent, regulator, sockets etc removing material and making good disturbed surface of wall floor etc complete all as direct by Engr -in -charge.

Point wiring complete with ISI marked 1.5 Sqmm single core PVC insulated FRLS unsheathed FRLS cable 1100 Volts grade with multistranded copper conductor drawn through in and including medium grade suitable size PVC conduit and accessories concealed in wall suitable for terminal boxes for fixing modular switches, sockets etc including suitable size modular plates concealed in walls and 1.5 Sqmm copper conductor as earth continuity to connect common earth dolly complete for One light point controlled by one 5 Amps one way switch NOTE: The quoted rate shall deemed to include for modular cover plates with frame of any colour and metal flush boxes of any type and size. Quoted rate is inclusive of chasing grooves in the wall for concealed type wiring and making good to match the existing surface.

All as per item No. 93 above but One ceiling fan /exhaust fan point controlled by one 6 Amps one way switch

All as per item No. 93 above but One 3 pin socket outlet 6 Amps on the same board with other switches.

All as per item No. 93 above but One 3 pin 6 Amps switch socket outlet point on independent board

Description all as per item No 93 here in before but for 15 amps socket outlet with 2.5 Sqmm Copper incl 2.5 Sqmm FRLS PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed by Engr-in-Charge,

S&F modular type 6 Amps, 5 pin mulitipurpose switch, socket outlet 03 Nos and 16 Amp multipurpose switch, socket outlet 01 Nos on one switch board concealed in wall suitable for terminal boxes for fixing of switch sockets etc including suitable size modular plates and including all internal elctrical connections with copper conductor complete all as specified and directed by Engr-in- Charge.

S&F modular type 6 Amps, 5 pin mulitipurpose switch, socket outlet 04 Nos on one switch board concealed in wall suitable for terminal boxes for fixing of switch sockets etc including suitable size modular plates and including all internal elctrical connections with copper conductor complete all as specified and directed by Engr-in- Charge.

S&F Modular Switch 1 way, 6 Amps 1 Module complete all as specified.

S & F modular switch 1 way, 16 amps, 1 module complete all as specified

S & F Modular sockets, 6 amps 2/3 pins combined 2 module complete all as specified

S & F Modular sockets,16 amps 5 pins combined 2 module complete all as specified

S & F Modular fan regulator, 120 watts, 2 module complete all as specified.

Supply and fixing Sheet Metal enclousure Plug and socket type DB (Functional Unit) 20 Amps capacity with provision of single pole 20 Amps MCB, plug top and earth plug, grouted flush to walls complete all as specified. Make- Legrand / Schneider/C&S/INDO COPP)

S&F MCB TPN 63 Amps 415 volts complete all as specified and as directed by Eng–in–Charge.

S&F MCB TPN 32 Amps 415 volts complete all as specified and as directed by Eng–in–Charge.

S&F MCB SPN 5 to 40 Amps 230 volts complete all as specified and as directed by Eng–in–Charge.

S&F MCB SP 5 to 40 Amps 230 volts complete all as specified and as directed by Eng–in–Charge.

Dismantling existing unserviceable MCB distribution board and S&F sheet metal enclosure DB concealed with wall having facility to fix MCCB as incomer and MCBs in outgoing, TPN vertical type 8 way of double door, complete fitted with bus bars, neutral links, G frame including S&F 3 pole MCCB 100 Amp capacity, 50 Hz, 16 KA Breaking capacity with adjustable over current and short circuit current rating blanking plates including making good disturbed surfaces complete all as specified and directed. Make L&T /Legrand / Schnieder

Dismantling existing unserviceable MCB distribution board and S&F sheet metal enclosure DB concealed with wall having facility to fix MCCB as incomer and MCBs in outgoing, TPN vertical type 8 way of double door, complete fitted with bus bars, neutral links, G frame including S&F 3 pole MCCB 125 Amp capacity, 50 Hz, 16 KA Breaking capacity with adjustable over current and short circuit current rating blanking plates including making good disturbed surfaces complete all as specified and directed. Make L&T /Legrand / Schnieder

Dismantling of existing unserviceable MCB distribution board and S&F sheet metal enclosure DB concealed with wall having facility to fix MCCB as incomer and MCBs in outgoing, TPN vertical type 4 way of double door, complete fitted with bus bars, neutral links, G frame including S&F 3 pole MCCB 100 Amp capacity, 50 Hz, 16 KA Breaking capacity with adjustable over current and short circuit current rating blanking plates including making good disturbed surfaces complete all as specified and directed. Make L&T /Legrand / Schnieder

S&F Sheet metal enclosure SPN DB 8 Way Double Door including all connections.

S&F Sheet metal enclosure SPN DB 4 Way Double Door including all connections.

S&F 2'x2' industrial luminaire recess mounted 36 W with electronic drive 5700 KCCT, luminaire efficacy not less than 120m/watt, suitable for grid ceiling connector block, etc fixed on false ceiling complete with all accessories internally pre-wired and including connecting up 3 core sheathed copper flexible cable 1.5 sqmm upto light fitting and connecting testing complete. Make: Jaguar cat part LULTISO36XC or equivalent in Philips/Wipro.

S&F LED industrial luminaire indoor Batten light , 1 x 22 W , 230Volt Energy efficient, Box type aluminium housing ,with Drive , connecter block, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Make: Jaguar cat part LGLZU1X022XC or equivalent in Philips/Wipro

S&F LED luminaire fully diffused LED Lumunaire Decorative light fitting for Main Entrance of Building , 30 Watt , 230Volt Energy efficient, with Drive , connecter block/ with universal susupension system with quick onsite adjustment mounting with 2 nos suspension on celing, etc. complete with mounting arrangement and all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Make: Jaguar Model No LM230-821-XX-57-XW or its equivalent in CG/Philips

S&F LED security lighting luminaire with Pressure die-cast powder coated LED streetlight 30W 5700K CCT, luminaire efficacy not less than 120 lm/watt, IP 66 protected with street optic lens for Building light clear acrylic cover and complete with all accessories including Drive with suitable connection complete all as specified and directed

M&L for submain wiring comprising single core ,4 runs of 10 sqmm nominal cross sectional area multistranded copper conductor cable,FRLS PVC insulated unsheathed 1100 Volts grade drawing in and including PVC medium grade conduit of not less than 25mm dia and conduit fittings concealed in walls complete including 2 runs of 10 sqmm nominal cross sectional area multistranded copper conductor cable, PVC insulated unsheathed 1100 Volts grade as earth wire complete incl taking down old UNSV sub main wiring complete all as specified. ( Note :-1. six runs of 10.0 Sqmm cable and 1 run of PVC conduit shall be measured as one unit length.

All as per Item No-119 above but with 4 runs of 6 Sqmm copper cable and 2 runs of 6 Sqmm as earth continuity conductor drawn through suitable PVC conduit and fittings complete all as directed by Engr-in-charge. ( Note :-1. six runs of 6 Sqmm cable and 1 run of PVC conduit shall be measured as one unit length.)

M&L for sub main wiring two runs of single core complete 6 Sqmm FRLS PVC insulated heavy duty and unsheathed cable with multistranded 1100 V copper conductor and drawing through in and including PVC conduit Concealed type of suitable size and connecting terminal ends including provision of 1 run of 6 Sqmm insulated copper cable for earth continuity conductor and connecting to earth dolly and all arrangement to connecting with Panel to DB with all accessories as directed by Eng-in-charge. Note: 3 runs of 6 Sqmm cable and 1 run of PVC conduit shall be measured as one unit length.

Description all as per Item No-121 above but with 2 runs of 4 Sqmm copper cable and one run of 4 Sqmm as earth continuity conductor drawn through suitable size PVC conduit and accessories complete all as directed by Engr-in-charge. Note: 3 runs of 4 Sqmm cable and 1 run of PVC conduit shall be measured as one unit length.

Description all as per Item No-121 above but with 2 runs of 2.5 Sqmm copper cable and one run of 2.5 Sqmm as earth continuity conductor drawn though suitable size PVC conduit and accessories complete all as directed by Engr-in-charge.Note: 3 runs of 2.5 Sqmm cable and 1 run of PVC conduit shall be measured as one unit length.

Taking down ceiling fan/ exhaust fan/ Wall mounting Fan of any make, sweep and dismantling, cleaning , greasing, overhauling and providing two coat of synthetic enamel paint of existing colour and refixing to its existing place including connections with new flexible cable 3 core copper conductor complete. For Ceiling fan - adjustment for providing new down rod including new canopy, clamp, rubber reel is included all as directed by Engr-in-Charge.

Removing old unserviceable conduit and S&F DLP U PVC adaptable trunkintg system of three section with accessories for mounting of Equipment Control Wires, Telecommunication Wires and electrical Cables with mounting complete all as specified and directed. Note (One Running Meter include with Base body 150 x 50mm , flexible full Cover width of 40mm , Separation partition for 105 x 50 Trunking, Base Joint (Body Joint - fro aligninng bases for installation, cover joint for 40mm width, Left or right end Cap & Internal/ External Angle.)

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 300 sq mm 3.5 core.

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70.0 sq mm 3.5 core.

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50.0 sq mm 3.5 core.

Dismantling of old unserviceable Panel and Supply & fabrication and fixing of LT Panel Board CPRI approved cubical type made of 2 mm thick sheet steel indoor type with IP 54 grade of protection CRCA sheet powder coated with support of angle iron of 50 x 50 x 6 mm angle iron bottom legs with minimum height of 20 cm frame with double hinged front openable shutters of each feeder control unit with locking arrangement in front and back openable inspection doors PVC sleeved Aluminium bus bar of 1000 Amps capacity for each phases and half neutral fixed on suitable insulator all housed in suitable bus bar chamber and cable alloy including provision and fixing of digital Voltmeter -01 No, Ammeter-01 No, CTs of suitable ratio, and Indicating LED type lamp for Red, Yellow and Blue in incomer phases complete along with provision of necessary cable entry/exit boxes for all incoming and out going cables with suitable cable glands etc fixed on suitable PCC foundations, testing and commissioning complete and consisting the following :- (Drawing of Panel and connections shall be approved by GE before starting the panel work). (a) MCCB 4 Pole 630 Amps 35KA microprocessor operated -01 No. (as Incomer) adjustable short circuit & over current rating (b) MCCB 4 Pole 250 Amps 25KA microprocessor operated -02 No. (as Outgoing) adjustable short circuit & over current rating (c) MCCB 4 Pole 200 Amps 25KA microprocessor operated -03 Nos (connected-02 & Spare-01) (as Outgoing) adjustable short circuit & over current rating (d) MCCB 3 Pole 100 Amps 16KA microprocessor operated -02 Nos adjustable short circuit & over current rating Make-LEGRAND/L&T/SCHNIEDER

M&L Earthing complete with GI earth plate electode 600x600x6mm buried directly in ground vertically, earth pit not less then 2.25 mtr deep below ground level with the top edge of earth plate at a depth of not less than 1.5 mtr below ground and connected to GI earth strip 25 x 4 mm size by means of bolts, nuts & washers of galvanised iron or steel, GI earth strip shall be protected by 40 mm dia GI pipe (light grade) up to connecting point, watering pipe 20mm dia GI Pipe medium grade, GI Wire mesh funnel, alternate layers of Charcoal and Salt including necessary excavation and earth work, PCC (1:3:6) type C-1 earth Chamber, 40mm thick precast RCC cover 1:2:4 type B-1 mix with 6mm dia nominal reiforcement @ 100mm c/c both ways etc complete all as shown in electrical plate No 3 connected to earth tested point, including testing on completion, complete all as specified and directed. Note: Earth strip beyond 7.5 Mtr, if required shall be measured and paid separately.

Earth continuity conductor GI strip 25 x 4mm as main earthing lead fixed to wall or batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc as required.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in soft loose soil for foundation of poles, structures, stay rods, laying of underground cable etc complete all as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers each not exceeding 25cm thick using soil complete all as directed.

Removing excavated surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as directed.

Supply and spreading of natural, clean, dry, river sand in trenches for cable protection complete all as directed. Note:- Punned thickness only shall be measured for payment purpose.

Supply & lay unreinforced precast concrete cable cover, class LV, type I, flat of size 250mm x 150mm x 40mm complete all as specified and directed

Supply and fix GI tubing 80 mm Tubes, 'light grade', galvanised, with all fitting; laid in trenches complete all as directed.

Cutting existing steel tubing for alterations upto 50 mm GI tubing complete all as directed. ( Each cut measured)

S & F GI tubing 50mm bore, medium grade with all fittings and fixtures laid in trenches complete all as specified.

S & F GI tubing 40mm bore, medium grade with all fittings and fixtures laid in trenches complete all as specified.

S & F GI tubing 25mm bore, medium grade with all fittings and fixtures laid in trenches complete all as specified.

S & F GI tubing 15mm bore, medium grade with all fittings and fixtures laid in trenches complete all as specified.

S & F stop valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe/fittings or for unions and fixed, ISI marked, of size 50mm bore dia of pipe complete all as specified and directed.

S & F stop valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe/fittings or for unions and fixed, ISI marked, of size 25mm bore dia of pipe complete all as specified and directed.

Ball brass valves, 25 mm size high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed.

Supply ,Fixing, Commissioning and Testing of the 4 Loop micro processor based Analog addressable fire alarm control panel with battery backup, Networkable. Make :- Honeywell/ NOTIFER/ESIS/EXFLAME

Supply, Fixing, Commissioning and testing of the analog Addressable multi sensor smoke/ Heat detector/Heat detector . Make :- Honeywell/ NOTIFER/FYKE/GE

Supply, Fixing, commissioning and testing of the analog Addressable Sounder with fixing accessories. Make :- Honeywell/ GE / FYKE

Supply, fixing, commissioning and testing of the analog Addressable fault isolators. Make :- Honeywell/ NOTIFER/FYKE/GE

Supply, fixing, commissioning and testing of the analog Addressable Manual Call Point Make :- Honeywell/ NOTIFER/FYKE/GE

Supply and fixing Response indicator for analog addressable Make : Honeywell/ NOTIFER/FYKE/GE

Supply and fixing and testing of 2 runs of 1.5 sqmm single core PVC insulated unsheathed FRLS multistranded copper conductor flexible wire drawn through 25mm dia rigid PVC conduit medium grade complete. Note: PVC conduit will be measured and paid separately

Supply, Installing and testing of I/O Module. Make : Honeywell/ NOTIFER/L&T/GE

S&F Rigid non-metallic PVC conduit of size 25 mm dia inclusive of boxes (junction/terminal) but inclusive of all tees, bends elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc

M/S GDR CONSTRUCTIONS

Sai construction & services

c devender reddy and co

Shetty Construction Co

R. Wadhumal and Sons