SPECIAL REPAIRS TO BLDG NO P-16 (SINGLE OR ACCN), P-3A (JCOs CLUB) AND P-63 3 (SINGLE OR ACCN) OF ASC CENTRE (NORTH) 1 ATC UNDER GE (CENTRAL) BANGALORE

Amount

B/R Portion

Dismantling Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings complete all as specified & directed.

Dismantling Single layer Mangalore pattern or similar tiles in roofing complete all as specified & directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified & directed.

S & F for false ceiling of 4mm thick HSPC (High Presure Steam Cured) pre-primed self embossed texured designer ceiling board, cement fibre board of size 595X595 mm (E-Board Classic, white colour) to be fixed in and including GI snap grid with rool formed out of hot dip galvanised steel capings (Powder coated finished) 600X600 mm system. The suspension system consisting of perimeter wall angle of size 38X24X0.90mm of thick GI sheet to secure on wall portion fixed with the help of rawl plug @ 450mm centre to centre universal main runner of T shaped section with single rotary stitching of size (32X24X0.9 mm) made from 0.0.9mm thick GI sheet of length 3.60 metre to be spaced @ 1200 centre to centre cross runner T shaped with double rotary stitching of size (28.6X24X0.9 mm) of length 1200mm made from 0.90 mm thick GI sheet spaced @ 600mm centre to centre (1200X600mm) of size module intermadiate T shaped cross runner of size (28.6X24mm) of length 600mm made of 0.0.90mm thick GI sheet to form (600X600mm) size of module including suspension of the ceiling from the roof/structural members, soffits angles, cleats, by using GI suspenders of 3mm dia GI wire and level adjusters including U clamp of GI fixed in ceiling all complete and making opening by cut out the ceiling board for ceiling light fittings as required and as per manufacturer's instruction or as directed. Make :- Eternit Everest / lafarge/ Armstrong or equivalent as approved by GE

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L Brick work with sub class 'B' bricks built in CM(1:6), straight or curved on plan exc 6 mtr mean radius, using old size bricks complete all as specified and as directed.

M&L for precast cement concrete block masonry type C1, 1:3:6 (20 mm graded granite stone aggregate) with solid blocks, exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M&L for Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water and removing debris outside MD land complete all as specified and directed.

M&L for Rendering 15 mm thick in cm 1:6 on fair faces of brick work or concrete surfaces such as wall finished even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 15 mm thick in cm 1:4 on fair faces of brick work or concrete surfaces such as wall finished even and smooth without using extra cement complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed.

S&F Mild steel work as in Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified & directed.

M&L for Rolled mild steel as in roof trusses (framed), trussed purlins crane gantries rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces cleats etc.,steel conforming to Fe 410-W (Gde-E- 250) quality-A all as specified and as directed. complete all as specified & directed.

Demolition of plain cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness. (below or above ground level) and removing debris outside MD land complete all as specified and directed.

M & L for 75mm thick Plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub-base of floor, etc complete all as specified and directed.

M & L for 25 mm thick, plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in base of flooring, level course etc and finished the surface fair to receive top layer screed bed complete all as specified and directed.

S&F Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

S&F Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

S&F Glazed coloured ceramic tiles as in vertical surfaces 350 x 250x 7 mm/ 450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including backing coat 10mm thick in CM (1:4) on fair faces of brick work or concrete surfaces complete all as specified and as directed.

M & L for Hardcore of broken/crushed stone aggregate of gauge n.exc 63 mm deposited, spread and levelled in layers not exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection laid in proper slope/gradient etc, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A' complete all as specified and directed

Taking down chowkhats or frames, not exceeding 1.5 Sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed.

Taking down chowkhats or frames, exceeding 1.5 but n.exc. 4 Sqm in each with shutters (without taking off shutter from the frame) complete all as specified and directed.

S&F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid rounded or chambered, put together with glue pinned at joints complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube complete all as specified and as directed.

S&F Factory made solid panelPVCdoor shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and as directed.

S&F 30 mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed.

S&F 30mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S & F box type steel windows/ventilators double side shutters ie glass and wire mesh shutter, including pressed steel frames made out of CRCA sheet of 80X60X1.25mm thick double rebated, shutters box type made out of CRCA sheet of 40X20X1.0mm thick, 12mm square guard bar/grill welded to steel frame, window shutters side hung, ventilator shutters top hung, box type hinges, aluminium die cast handles for glass shutters, iron flat type handles for mesh shutters, telescopic stays etc complete all as specified in TD drawing No TD/539 dated 09.02.2004 of Chief Engineer Chennai Zone and as directed. NOTE:- (i) Qouted rate under this item shall deemed to be inclusive of steel frame, both side steel shutters, guard bars/grills, handles, stays, beading/fillets for fixing glass/wire mesh including cost elements for fixing of glass & wire mesh and mearurement/ payment shall be considered as one unit by comprising all these elements. (ii) Glass and wire mesh shall be measured and paid as supply only underseparately under respective item.

S & F 4 mm thick, sheet glass, pin head/figured glass and glazing with oil putty/timber beads in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F Stainless steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.4mm fixed with tinned tacks or Stainless steel staples fixing complete all as specified and directed.

S&F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F 100mm long Aluminium handles, cast type, anodised complete all as specified and directed.

S&F 100 mm long Aluminium anodised, barrel tower bolts of ex- truded section and fixed complete all as specified and directed

S&F 125 mm long Aluminium anodised, barrel tower bolts of ex- truded section and fixed complete all as specified and directed

S&F 125mm long Aluminium handles, cast type, anodised complete all as specified and directed.

S&F 300 mm length Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified and directed

S&F in repairs 25 mm dia aluminium anodized decorative type curtain rods complete all as specified and directed

S&F in repairs decorative type curtain rod brackets complete all as specified and directed

S&F 300mm Mild steel, ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and directed

M&LCutting holes in brick/stone walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 exceeding half brick but not exceeding one brickcomplete all as specified and directed

M&L for Preparation of new or previously untreated wooden surfaces of any description not other wise described over 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for Preparation of new or previously untreated steel and iron surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel over a coat of red oxide primer, complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of distemper oil emulsion over a coat of primer to plastered and other surfaces including providing wall care putty two coats in minimum 1mm to 2 mm thick on plastered surface complete all as specified and directed.

M&L for preparing new surfaces plastered or unplastered on walls and distempering with two coats of distemper oil- emulsion over 3mm thick wall care putty over chalk whiting complete all as specified and directed

M&L for preparing old surfaces plastered or unplastered on walls and applying two coats of white wash complete all as specified and directed

M&L for preparing new surfaces plastered or unplastered on walls and applying three coats of white washcomplete all as specified and directed

M&Lfor Plain Cement Concrete (1:4:8), type D-2 using 40mm graded stone aggregate as in sub base of floor 100 mm thick complete all as specified and directed

M&L for 15 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete all as specified and directed

M&Lfor Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cementand pigments complete all as specified and directed

M&L for Plain Cement Concrete (1:2:4), type B-1 using 20 mm graded stone aggregate as in coping & similar bands, plinth courses, string courses, lacing courses, parapets, bed plates, drain etc complete all as specified and directed

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches including taking up or down steel tubing and connections, including cleaning for re- fixing or removal to store complete all as specified and directed

S&F in repairs Vitreous China Wash hand basin , oval type, coloured, any size, with black granite slab 60cm x 50 cm including cutting hole and pinning in ends of brackets , or erecting stand with fixing of 32 mm waste coupling brass chromium plated suitable for wash hand basins, with 32 mm dia 800 mm long waste pipe complete all as specified & directed.

S&F Pillar tap chromium plated fancy type cast copper alloy complete all as specified and directed

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to drain or outgoing pipe and flushing pipe complete all as specified and directed

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including connection to drain or outgoing pipe and flushing pipe and with Plastic water closet seat, white, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed

S&F in repairs 10 ltr capacity low level PVC Flushing cistern with PVC connection pipe, 15 mm dia, 600 mm long and 32mm dia flush pipe complete all as specified and directed

S&F in repairs Bib tap cast copper alloy 15mm fancy type , Chromium plated , with crutch or butterfly handle , screwed down screwed for iron/cpvc pipe complete all as specified and directed.

S&F in repairs Stop valves for 15 mm bore dia pipes, cast copper alloy, screwed down, high pressure,fancy type, chromium plated with long shank and cup (concealed type) with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S&F in repairs Tubular towel rail, 20mm dia, D type, Brass Chromium plated, 60cm long between flanges complete all as specified and directed

S&F in repairs Chromium plated shower roses with or without swivel joints, 95 mm dia, including fixing to steel pipe or union complete all as specified and directed

S&F in repairs Health faucet mild steel chromium plated suitable for 15 mm dia pipe with 1 metre long flexible tube including making connections and fixed in position complete all as specified and as directed. Make :-Cat Part No of Cera F8030103 or equivalent in parryware/ Hindware/Prayag

S&F in repairs soap dish, CP, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

M&L for PVC (SWR) floor trap 75 mm dia, plain with grating including jointing with solvent cement complete all as specified and directed

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed

S&F PVC (SWR) bends 110 mm dia, any radius complete all as specified and directed

S&F PVC (SWR) bends 75 mm dia, any radius complete all as specified and directed

E/M Portion

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safecustody or for taking credit and making good disturbed surfaces of walls, floors, etc.

Point wiring with PVC insulated and unsheathed FRLS cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS-694 1990 drawn in and including PVC/MS rigid non metalic conduit on surface conforming to IS-9537 with all accessories including fabricated MS terminal boxes fixed flush with wall surface with 3mm thick masonite/PVC laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for :- One light or fan point controlled by one 5 Amps switch one way.

All as per item No 2.002 above but one 3 pin socket point 5 Amp on independent board.

All as per item No 2.002 above but one 3 pin socket point 5 Amp on same board with other switches.

All as per item No. 2.002 above but with 2.5 sqmm ( Nominal area ) size single core multistranded copper conductor cable with 2.5 Sqmm size copper earth continuity conductor for 6 pin 15 A socket outlet on independent board complete all as specified and directed.

S&F ultra modern recess mounting 2' x 2' luminaire suitable for POP ceiling complete with separate electronic driver, 42 watts and connecting up with three core flexible copper conducter cable of 24/0.2 sqmm complete all as specified and directed. Make- PLUTONEO2x2PLR42WLED840S of Havells or equivalent in Bajaj/Wipro/Philips/Crompton Greaves.

S&F decorative LED Building Security street light fitting of 1 x 25 watt with polycarbonate cover to be fixed to wall with suitable clamps and connecting up with three core flexible copper conducter cable of 24/0.2 sqmm complete all as specified and directed. Make- LST-25-CDL-M of Crompton Greaves or equivalent in Bajaj/Wipro/Philips/Havells.

M&L for Switch piano, flush type single pole, one way 5 Amp complete all as specified and directed

M&L for Switch socket combination 5 pin, 5 A flush type complete all as specified and directed

M&L for Switch socket combination 5 in 1, 5 /16 A flush type universal multipurpose complete all as specified and directed

S&F Ceiling rose surface bakelite 65x50mm three terminals including supply and fix PVC blocks. Make : Anchor/Cabtree/Legrand/Standard

S&F LED tube light fitting of 20 watts 6000K , 230 volt, with aluminium extruded channel powder coated with high quality diffuser for glare free light complete with all fixing accessories and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge. Make : CCS-100-20-65-HL2-DP-NWH of Crompton Greaves or equivalent in Havells/Bajaj/Philips/Wipro

S&F Sheet metal enclosure IP 43(ISI marked) distribution board for 240 volts, SPN8 way horizontal type, double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete all as directed.

Supply and fix in replacement MCB single pole 6 to 32 Amps 240 volts, C series, 10 kA rupturing capacity.

Supply and fix in replacement MCB single pole and neutral 32 to 63 Amps 240 volts, C series, 10 kA rupturing capacity.

M&L, Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.0mm thick buried directly in ground (earth pit depth not less than 2.25m deep below the ground level) with top edge of earth plate at a depth not less than 1.5m below ground level connected to earth using GI earth wire of 4 mm dia by means of of nuts, bolts and washer and check nuts of GI or steel as shown in electrical plate No.3 of MES SSR-2009 (Part-I) and connected to earth test point all as specified or indicated including testing on completion as per electrical plate No.5 of MES SSR-2009 (Part-I)and including PCC (1:2:4) pit with frame cover of 25 x 25 x 6 mm, MS Sheet 3mm thick and handle of 6mm dia MS bar made to shape, watering arrangement with 20mm dia light grade pipe, funnel, wire mesh, common salt chorcoal, necessary excavation and earth work in any type of soil complete all as specified.

Supply and fix in replacement Sub main wiring with 2 runs of 4.0 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in existing non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. Note: 2 Runs of 4 sqmm cable, 1 run of 2.5 sqmm cable and 1 run of PVC conduit shall be measured as single run for the purpose of measurement

M&L for Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and directed

M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cmcomplete all as specified and directed

M&L for Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting pointcomplete all as specified and directed

M & L for Sand cushioning and covering with clean dry sand in trenches for protection of under ground cables (below, above and around the cable laid in trenches) complete all as specified and directed. (Note: Thickness after punning down shall be measured for payment)

Supply and laying well burnt bricks, locally available best quality bricks laid breadth wise across the length of cable in trenches for protection of UG cables complete all as specified and directed.

S&F in replacement mild steel galvanized pipe light grade for protection & passing of LT cable fixed to poles/walls/laid under floor/roads complete including fittings/clamps as required at site all as specified for size of 40mm bore dia.

Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated, GI strips armoured cable for working voltage 1100 volts, 2 core, nominal cross sectional area of main conductor 16 Sqmm, stranded aluminium conductor, ISI marked as per IS-7098 (Part-I) 1988 including cable glands, lugs etc to suit the cable size and to be laid in trenches, culverts, under floors, through GI Pipe complete all as specified and as directed.

Supply and Fixing exhaust fan, 300mm sweep metal body, AC single phase 230/240 Volt including bird free louver shutter cut to fit with hole for exhaust fan including providing holes grouting bolts,porciline connector and 3 core flexible copper conductor of 0.5 sqmm from terminal complete all as directed. Make : - Usha/almonard/Crompton/Khaitan/Bajaj. NOTE: - Quoted rate shall be deemed to include for making hole with core cutting machine for providing exhaust fan in wall including making good and necessary fixing arrangement of louvre using nut, bolts, washers etc complete.

YASHASVI BUILDERS

AAKAAR INTERIOR & CIVIL CONTRACTOR

Elite Constructions

Sangam Construction