PROVISION OF PARKING SHED FOR TYPE IV AND TYPE V QUARTERS AT GOA UNDER GE(I)(CG) GOA

Amount

Surface excavation n.exc. 30 cm deep and averaging 15 deep and getting out in soft/disintegrated rock complete all as specified and directed.

Removing excavated soil exceeding 50m but not exceeding and depositing where directed to a level n exc 1.50m above the starting point in soils complete all as specified and directed.

M & L Excavation over areas n exc 1.50m deep and getting out in soft/disintegrated rock complete all as specified and directed.

Removing excavated exceeding 50m and depositing where directed to a level n exc 1.50m above the starting point in rocks complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 Sqm on plan and n exc1.5 m in depth and getting out soft and disintigrated rocks complete all as specified and directed.

M & L Plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

M & L Reinforced cement concrete M30(Design Mix) type-B1 using 20mm graded stone aggregate as in Foundations, including rafts,footings, foundation beams; plinth beams; bases for columns, etc; basement slabs,under-reamed piles and mass concrete complete all as specified and directed.

M & L Reinforced cement concrete M30(Design Mix) type-B1 using 20mm graded stone aggregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L Precast cement concrete block masonary 1:3:6 type C-1, using 20mm graded stone aggregate with solid blocks exc 10cm in width and setting in cement mortar 1:6 complete all as specified and directed.

Rendering 10 mm thick, on other than fair faces of brick or stone surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layer not exceeding 25 cm thick for soft/ disintegrated rock complete all as specified and directed.

M & L Two coats of cement base paint, white or tinted on new wall surface including preparation of surface complete all as specified and directed.

M & L Reinforcement TMT bars 10mm dia & over, cut to length,bent to shape required including cranking,bending spirally for hooping for coloumns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-500 complete all as specified and directed.

All as per item No 13.00 but 5mm dia and over upto and including 10mm dia as in stirrups, binder, ring etc complete all as specified and directed.

S & F Rolled mild steel section as in Plates (Plain or chequerred) channels, square cut or notched (ordinary and counter sunk) forming holes with riveted, bolted or welded attachment complete all as specified and directed.

S & F Rolled mild steel section as in Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.

S & F Providing and fixing 0.56 mm thick aluminium alloy colour coated roofing sheets of alloy IS designation 31500, temper H*8 conforming to IS 737 and dimension as per IS Code 2676 with characteristics of good formability and corrosion resistance and troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width 1092 mm, cover width 1000mm at all heights, levels and locations. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/ tapping stainless steel screws M6, 60 mm long with 3 mm EPDM seal washer etc, all inclusive of labour, scaffolding, T&P and sundries etc complete all as specified and directed.

Surfaces of any description, n.exc 10cm in width or girth otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed.

S & F Mild steel bolts. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long and dia of neck Exc 12, but n.exc 20mm approximately length 60cm complete all as specified and directed.

M & L 100mm thick Plain cement concrete type C-2, 1:3:6 using 40mm graded stone aggregate complete all as specified and directed.

M & L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 Grade with grey cement and pigment complete all as specified and directed.

M & L Precast Plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in kerbs etc set in Cement mortar 1:6 complete all as specified and directed.

Removing excavated materials exceeding 50m but not exceeding 250m and depositing where directed to a level n exc 1.50M above the starting point in rocks complete all as specified and directed.

M & L Plain cement concrete 1:3:6, type C2, using 40mm graded stone aggregate foundation mass concrete complete all as specified and directed.

M & L Plain cement concrete 1:3:6, type C1, using 20mm graded stone aggregate as in coping complete all as specified and directed.

M & L Extra for forming fair finish to drains and channels 45 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

M & L Submain wiring with 2 runs of single core PVC insulated FRLS unsheathed suitable for 1100 volts, multistranded copper conductor conforming to IS:694:1990 with ISI marked cable of size 1.5 Sqmm and one run of 1100 Volts grade PVC insulated FRLS unsheathed 1.5 Sqmm multistranded copper conductor cable 1100 volts green colour as continuous earth conductor drawn in and including PVC conduit medium grade of size 25 mm dia , ISI marked for sub-main wiring on surface in wall/roof etc. with required accessories complete all as specified and directed.

S & F MCB DB SPN double door 4 way 240 volts complete all as specified and directed.

S & F amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 32 AMP in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S & F amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 5 To 32 AMP in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

M & L Ceiling rose 3 terminals/ PVC polycarbonate isolated body size (65x50)mm surface type, 230V complete all as specified and directed.

S & F in repairs LED tube light fitting 1 x 20 W, 230V wall mounted integrated batten, 4 ft LED module fixed on wall/surface/ceiling shall confirm to IS 16103 and shall bear BIS certification marking complete with all accessories internally pre- wired and including connecting up with twin core twisted flexible copper conductor cable with suitable sizes complete all as specified and directed.

M & L Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, using galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point PCC 1:2:4 type B1 using 20mm graded stone aggregates as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4, type B1 with 8mm Tor steel @ 100mm C/c both way with lifting handle including necessary excavation, earthwork including testing on completion complete all as specified and directed.

S & F Fabrication, errection testing complete Hot dip galvanized IRON octagonal pole 7 metre long with Single arm bracket of size 1 mtr. with 40mm dia of GI pipe and 15 degree arm tilt suitable for wind speed up to 47 m/s, junction box. Dimension top 70mm and bottom 130mm, 3mm thickness, base plate 200mm x 200mm x 12mm as per BSEN ISO 146, with foundation bolts of 4 Nos of 20 mm dia 'J' EN8 grade bolt with nut and washer with MS template all as specified. Including finial and necessary Civil works like RCC/ PCC foundation earthwork etc complete Including taking down existing Steel tubular pole complete all as specified and directed. [Make: BAJAJ CAT NO BOP- 7030 or similar in make as mentioned in Particular Specification]. (i) Welding Standard:- IS:10178:1995/ IS 9535:1996. (ii) Design:- As per IS 875 Part-3:2015, IS:800:2007/IS 6533:1989(P-2) /BS 5649:1985/EN 40 (iii) Galvanization Standard:- As per 4759:1996/IS:2629:1985/BSEN, ISO:1461:2009. (iv) CIVIL WORK IN FDN:(i) Design & drawing of foundation / pole shall be submitted from manufacturer for approval of Engineer-in-charge. (v) Cost of all civil works/ foundation works for fixing poles shall deem to be included in this item rate quoted by bidders, No extra cost in this regard shall be entertained in future. [Note:- LED Street light will be measured and paid under BOQ Item 36.00]

S & F LED street light fitting 70Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core complete all as specified and directed.

M & L Sand cushioning with river washed and screened dry fine sand to under ground cable 23 cm thick, 15 cm below the cable and 8 cm after laying the cable, duly punned complete all as specified and directed.

Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1 with peak size 250 x 150mm x 40mm complete all as specified and directed

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sq mm 2 core complete all as specified and directed.

M/S Kartik Enterprises

Tiwarinassociates

M/S jvsr constructions

Tara Construction