SPL REPAIRS TO BLDG NO P7 D AND I LABORATORY IN CQA ME TECHNICAL COMPLEX AT AUNDH ROAD PUNE UNDER GE MH AND RH KHADKI

Amount

Removing of old water proofing treatment and cleaning the surface of slab and cleaning with wire brush, removing dust,foreign materials and removing the rubbish off the site to a distance n.exc 100m all as directedby Engr - in - Charge.

M & L for PCC 1:2:4 type B-0 (using 12.5 mm graded aggregate ) on roof top for maintaining of slope coving,benching etc all as specified and directed.

M&L for Rendering 10 mm thick on concrete surfaces of roof in cement plaster in 1:3 CM mixed with WPC @ 3% by weight of cement finishing even and smooth to receive water proofing treatment complete without using extra cement all as specified and directed by Engineer-in-charge. Note :- WPC shall be measured and paid seperately.

M & L for cleaning the plaster /concrete surfaces with wire brushes and applying water proofing treatment ,one coat of bituminious primer @ 0.25 kg per sqm and providing 3 mm APP modified water proofing Membrane weight 3.5 to 4.0 kg /sqm by torch application method including painting entire roof surfaces with one coats of bitumastic aluminous paint

Supply only water proofing compound

Demolation of reinforced cement concrete ,Roofs, floors (other than ground floors), beams, RCC water tanks staircases, landing, chajjas and similar suspended work

Taking up or down steel tubing 20 mm dia and connection including cleaning for refixing for following bore of pipe, complete all as specified

M&L for tube medium grade 20 mm dia, galvanized with all fittings fixed complete to wall including cutting, chesing in wall and concrete surefaces, ceiling or laid in floors etc. for following dia of pipe, complete all as specified

Refixing old steel tubing and connection of 20 mm diain new or old position (walls, ceiling ,floor etc

Taking up or down steel tubing 15 mm dia and connection including cleaning for refixing and removing to store for following bore of pipe, complete all as specified

M&L for tube medium grade 15 mm dia, galvanized with all fittings including cutting, chesing in wall and concrete surefaces,fixed complete to wall, ceiling or laid in floors etc. for following dia of pipe, complete all as specified

Refixing old steel tubing and connection of 15 mm diain new or old position (walls, ceiling ,floor etc

S&F in repairs, gun metal globe or gate valves 20 mm dia ,with iron wheel head,screwed both ends for iron pipes

S&F in repairs ball brass valve 20 mm dia high pressure with poly-thine float and fly nut for following bore of pipe, complete all as specified

Dismantling water tank of any description or capacity 1000 ltrs all as specified as directed.

S & F Rotational moulded polyethylene water storage tanks (cylindercal veritcal with closed top) hoisted and fixed inposition 1000 ltrs capacity all as specified

Taking down chowkat without taking off shutter from frame n.exc 1.5 sqm each all as specified and directed.

M & L for 20mm thick Granite slab machine cut in jambs, cills, cooking platforms,counter tops and like laid over cement screed and jointed with grey cement slurry and pointed with whiteor colour cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete including screed bed 15mm thick in CM 1:4.

S&F aluminium louvered ventilators of section size 100mmx25mmx1.50mm including frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. including taking down existing steel ventilator incl taking down ol ventilator all as directed by Engr-in-Charge. Note :-(i) Making good of wall surface with matching to existing surface complete all as specified and directed.

S&F aluminium powder coated window sliding type (3 track) with frame size 100x35x1.20mm and shutter 39.40x17.70x1.20mm with two glass shutter and one stainless steel wire mesh shutter including necessary jointing cleats, glazing clips, rubber packing powder coated aluminium snap beading screws with 4mm wire mesh glass and 0.56mm dia SS wire mesh, fittings etc, and necessary locking arrangements and including making good the jambs and painting with matching type and shade incl taking down old windows complete all as directed Note :-(i) Making good of wall surface with matching to existing surface complete all as specified and directed.

S&F Powder coated Aluminum deco grill of approved pattern using channel of required size, screwed to windows & ventilators with self tapping screws all as specified & directed

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, window cill and other similar situations all as specified.

Taking down cement plaster in any description incl racking out joints hacking for key and scrubbing down with water etc. Spd and directed by EIC

M&L for Rendering 15mm thick, on fair faces on stone/block masonry surfaces or surfaces walls in CM 1:4 all as specified and directed by EIC

M&L Complete removal of existing treatment & applying two coats of oil bound distemper of approved colour and pattern over a coat of primer over 3 mm thick wall care putty finished even and smooth.

M & L for preperation of new surfaces and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

M & L for preperation of old surfaces and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down form wall and parepet wall .

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, Modular boxes, plates etc. removing materials to store for keeping in safe custody or for taking into credit and making good disturbed surfaces of walls, floors etc all as directed.(including dismantling of flame proof point wiring).

M&L for point wiring complete with 1.5 Sqmm single core FRLS PVC insulated unsheathed cable 1100 V grade multi stranded copper conductor drawn through concealed non metallic rigid PVC conduit medium grade and accessories in surface of walls/ceilings including 1.5 Sqmm dia multistranded copper cable as earth continuity conductor connected to common earth dolly, including 1.22 mm thick pressed steel terminal boxes of suitable thickness, 3 mm thick laminated sheet cover to house switch/regulators etc all as specified and directed.

One fan/light point controlled by one switch.

One switch socket outlet 5 Amps on independent board.

One socket outlet 5 Amps on the same board.

All as per Item No 30 above but with 2.5 Sqmm PVC insulated multistranded copper conductor cable including 2.5 sqmm PVC insulated copper cable as earth continuity conductor for one switch socket outlet 15 Amps on independent board all as directed.

All as per Item No 30 above but with 4 Sqmm PVC insulated multistranded copper conductor cable including 4 sqmm PVC insulated copper cable as earth continuity conductor for one switch socket outlet 20/32 Amps on independent board all as directed.

S&F 16 Amp multi pin switch socket combination .

Supply and fix in repairs ceiling rose surface bakalite with three terminal typein all as specified and directed.

Supply and fix switch piano type one 6 amps flush type 240V AC all as specified

Supply and Fixing in repairs switch socket combination 2 in1, 3 pin, 6 amps flush type all as specified and directed.

Supply and fix in repairs fan regulater 120 watt flush type 240 volts all as specified and directed

Taking down old unserviceable Tube light fitting of any type and S & F wall/ceiling mounted LED tube light fitting aluminium body , Energy efficient high quality invertor batten having Lithium ion battery of 3.7V, 19 WH for backup upto 2Hrs with high power brightness having BIS certification, LED fitting should be LM 80 certified with system efficacy greater than 100 lumens/watt, including LED tube 20/22 watt having colour temperature 6500 K (4 feets long) , PF> 0.95, THD less 10%, with IP20 protection having open and short circuit protection, having input voltage range 90V to 300V connecting with three core flexible copper wire from connector to ceiling rose/angle holder as per existing site requirement as directed by Engr-in-charge. Make : Jaquar/Halonix/Philips . Note :- The rates are inclusive of cost of ceiling rose -01 nos and square box-02 nos including suitable size of clamps and screws etc.

Taking down old unserviceable Bldg security light and S&F fix high efficent LED building security light 35/36 watt , 230 V , lumen 2000 -3000, PF> 0.9, THD less 10%, made of pressure die cast aluminuim housing with high power LEDs, lens and toughned glass IP 66 connecting with three core flexible copper wire from connector to ceiling rose complete all as specified and directed. Make :- Halonix/Bajaj/Havells/Jaquar.

S & F in repair bracket for mounting building security light made out of 40 mm dia Light Grade GI pipe, length not less than 1.2 mtr, bend in angle with holding MS clamps two nos each bracket/clamp of size 25x3 mm including screws, nut bolts, washers etc for fixing the bldg security light all as specidfied and directed by Engr in charge.

Supply and fix High efficency LED Flood light of capacity 120 watt complete with pressure die cast aluminium housing in rectangle shape and toughened glass in the front The luminaries shall be monolithic construction totally enclosed dust and water proof with minimum IP -66 protection pre wired up to connector including 2.5 sq mm PVC insulated cable for making connection , complete all as specified and directed by Engr-in-charge. Make :- Orient/ Halonix/Benlo/Philips.

Taking down old unserviceable wall bracket light fitting of any type from any height & S & F wall mounted high quality indoor wall bracket light cylinderical/oval shape aesthetically designed fitting in wooden housing , glass and B22/E27 holder complete including inverter LED bulb B-22 cap with opal diffuser, IP-20 and inbuilt battery backup (LED INVERTER LIGHT 10W B22 CW IP) 10/12 watts including necessary eletric connection with PVC insulated multistranded copper cable of size 1.5 sqmm 3 core from ceiling rose to fitting terminal complete all as specified and directed. Make :- Hanolex/Benlo/Jaquar/Havells. Note :- (i) The rates are includive of light fitting and invertor bulb of cap 10W (ii) The rates are inclusive of civil work (plastering, painting etc) wherever required for fixing the fittings to the walls.

M & L for new exhaust fan of size 450mm sweep industrial type heavy duty 230 volts single phase including dismantling of old one and deposited it to MES Store all as specified and directed.

Taking down old unsv ceiling fan from any height and depositing it to MES store and Supply and fix new ceiling fan with blades, down rod, electronic regulator including remote and accessories, 230 volts,1200mm sweep min air deleivery 210 cfm with service value 6.00 BEE, Five star rated with Brush less direct current motor(BLDC).

S & F in repairs Industrial wall mounting plug socket of 32 Amps rating with SPN single pole and neutral with a two pin and earth plug and socket complete all as specified and directed. Make: L&T cat part DBPPS563SD or equivalent make Legrand/Havells/C&S

M&L for sub main wiring but using two single core multistranded PVC insulated copper conductor FRLS Cable of size 6 sqmm 1100 volt grade drawn into concealed PVC Conduit of suitable size including 6.0 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious earthing including chislling/cutting of wall, floor, making hole through wall & making good disturbed surfaces of wall/floor/ceiling to match with existing surface including taking down u/s submain wiring of any size . Note: Two single core cable of 6 sqmm and One earth wire of 6 sqmm and PVC conduit of suitable size shall be measured as one length.

S & F and replacement of sheet metal enclosures for double door distribution board factory made duly painted 8 way SPN and neutral 240 v with 200 amps rated bus bar , suitable for fixing MCB /Isolators all as specified Make: Hager/L&T/legrand

S & F factory made sheet metal enclosure MCB Distribution board Double door IP 43 protection in repairs 4 Way TPN, 415 volts complete with 200 Amps rated copper bus bar and neutral link complete all a specified and directed.

M & L For new MCCB 4 pole of capacity 125 Amps, 16 KA, ics = 100%icu , 415 Volts complete all as specified and directed.

S & F MCB SP 6 to32 amps.

S & F MCB SPN 25-40 Amps .

M & L for earthing complete in repairs with galvansihed steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level connected to 4.0 mm dia galvansihed earth lead wire by means of nuts bolts check nuts and GI washers including PCC pit in PCC 1:2:4 type B-1 RCC cover 20 mm dia (medium grade) GI watering pipe with funnel wire mesh and protection pipe of GI of suitbale size upto 7.5 mtr length including charcoal black cotton soil as required at site to achieve the earthing result and common salt, excavation earth work etc in any type of starta complete all as shown in electrical plate No 3 as specified, GI wire suitable size and length for continuity earth wire from test point to main distribution Board and all as directed. (Note: (i) Rate for achieving required depth by compressor machine if required is deemed included in item unit rate. (For TPN DB - 02 nos and Flame proof TPN DB - 02 nos)

Material and labour for earthing with galvanised earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground vertically to a depth of not less than 2.25 mtr below ground level connected to GI strip 32x6mm thick, by means of GI Welding made out of galvanised iron mild steel and 40 mm dia GI pipe "light grade" for protection of earth lead and connected to LT panel board or transformer neutral earth or as directed including earthing pit of size 450x450x300mm (outer size) wall thickness 100mm made in PCC (1:3:6) type C-1 and pre-cast reinforced cover slab of size 450mm x 450mm x 80mm thick made with MS XPM Jalli, RCC (1:1.5:3), with one handle made out of 8 mm dia round bar, 20mm dia GI pipe 'light grade' for watering funnels, wire mesh and provided charcoal or coke of alternative layers of 15 cm including necessary earth work of size 300x900mm, depth 2.50mtr and testing complete all as specified and directed. (For LT Panel)

Taking down u/s circulator fans of any type and deposit to MES store and Supply & fix new Air Circulator fans 230 volts single phase oscillating 450 mm sweep heavy duty, 100 watts power output suitable for wall mounting along with fixing clamps complete all as specified and directed.

Note : (i) Electrical connection from switchgear to bus bar would be through Aluminium strips of suitable size. (ii) The internal electrical connection for measuring instruments would be through multi-stranded PVC insulated copper conductor cables of suitable size. (iii) The termination of incoming and outgoing cable into and from switchgear would be through properly crimped aluminum lugs of suitable rating incommensurate with that of switchgear. (iv) Cable glands would be provided for incoming & out going cables in panels. (v) The cost of fixing of the panel on suitable PCC (1:3:6) type C-1(using 20 mm graded black trap/basalt/granite stone aggregates) foundation as directed by Engineer-in-Charge is deemed to be included in the quoted rates by the contractor for the above item. (vi) The panel is to be fixed with Angle Iron Frame of size 50x50x6mm with bottam of panel having minimum 60cm height from existing ground/floor level.

Aluminium bus bar strips with proper colour code -04 No, 300 A cap, insulator, nuts bolts etc complete.

Indicator Lamp-01 Set (Set of three)

Incommer MCCB 4P 250 Amp, 415V, 36 KA Ics = 100 Icu Adjustable type - 01 No

Outgoing, MCCB 4P 125 amp, 415V, 25 KA Ics = 100 Icu Adjustable type - 05 No (02x for Flame proof DB, 01x for TPN DB & 01x spare)

Outgoing, MCCB 4P 100 amp, 415V, 25 KA Ics = 100 Icu Adjustable type (For Flame proof DB)

MCB SPN 32A,10KA B CURVE - 01 Nos for Bldg light

Change over switch of capacity 250 Amps - 01 Nos

Connection with Aluminium bus bar strip duly insulated with coloured sleeves /stranded copper cable of suitable size with thimbles.

Supplying, laying, jointing, commissioning and testing XLPE insulated screened PVC bedded, armoured, heavy duty underground electric cable of size 70 sq mm 3.5 core in replacement with stranded aluminium conductor 1100 volts grade confirming to IS-7098 (Part-I-1988) laid in trenches/ducts/wall / floor / pipes/ poles including suitable size of fixing clamps, cable glands and aluminium lugs of appropriate size, pvc sleeve etc complete all as directed by Engineer in -Charge. (to be laid open to walls/Floors) Make :- Havells / Gloster / Finolex / Polycab

Flame Proof Lighting in lab -1 ,2 and 3

M&L for point wiring flame proof in stove enamelled ERW steel conduit of size not less than 20 mm dia and upto 40mm dia medium grade on surface with ISI marked two runs of PVC insulated unsheathed multistranded copper conductor cable (FRHR) 1.5 sqmm nominal cross sectional area, 1100 volts grade and including one run of 1.5 sqmm (green colour) ISI marked PVC insulated unsheathed multistranded (FRHR) copper conductor cable as earth wire with all flame proof fittings such as elbow, bends, junction boxes, ceiling rose saddles , flexible metal conduits etc. incl suitable size of sheet metal box 1.6mm thick (ISI Mark), screws and rawal plug etc. and connected to light/fan and common earth dolly with necessary copper thimbels all as specified and directed by the Engr-in-charge for the following :-

One light/fan/bell point controlled by one, one way switch .

-Ditto- all as per item No 58 here-in-before but for socket out let, 15/16 Amps. independent with 2.5 Sqmm size cable and 2.5 Sqmm for continuity earth wire connected to common earth dolly all as specified and directed by Engr - in - charge.

S&F Fluorescent tube light fitting 1x16W/18W/20W flameproof type FLP-WP made of aluminium alloy LM6, complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as per OEM recommendations complete all as specified and directed. Make :- Shyaam/Crompton Greaves.

Dismantling old ceiling fan of any type from any height and depositing it to MES store and S&F 48 inch Flameproof ceiling fan FLP-WP made of aluminium alloy LM6, complete with all accessories including flame proof fan regulator and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete.

S&F FLP - WP switch socket and plug combined in LM6 aluminium alloy 16 A 2P + Earth , 250 volts complete all as specified and directed.

S&F FLP - WP switch flame proof rotary ON-OFF type with termination box in LM6 aluminium alloy, 10/16A, single pole 250V complete all as specified and directed. Make-Shyaam, Cat No. - SSPL/2C/1010. or Sudhir or equivalent.

S&F in replacement of Flame proof , weather proof 8 way SPN MCB DB 240 volts in LM 6 construction consisting of 01 nos of incomer MCB SPN -40/32 amps (01) Nos MCB SP -06 -32 Amps 06 nos 10 KA breaking capacity as outgoing all as specified. Make :- Shyaam Cat Part No-SSPL/MCDB/186 or Sudhir or equivalent. Note :- The rates are inclusive of MCB SP & MCB SPN used in DB.

S&F in replacement of Flame proof , weather proof 4 way TPN MCB DB in LM 6 construction consisting of 01 nos of incomer MCB TPN -63 amps (01) Nos MCB SP -06 -32 Amps 12 nos 10 KA breaking capacity as outgoing all as specified. Make :- Shyaam cat No SSPL/RCP/109/Sudhir or equivalent. Note :- The rates are inclusive of MCB SP & MCB SPN & MCB TPN used in DB.

S&F Wiring for submain wiring alongwith earth wire with FRHR PVC insulated copper conductor, multistranded, on surface of size 2 x 10.0 Sqmm & 1 x 10 Sqmm earth wire in ERW steel conduit including dismantling the old one complete all as specified and directed by Engr-in-Charge. Note: Two run of FRHR PVC insulated copper cable of size 10 sqmm , earth wire of size 10 sqmm and Steel conduit of size as per site requirement shall be measured as one length.

Dismantling old Air circulator / Wall fan of any type from any height and depositing it to MES store and Supply & fixing Flame proof Air circulater/Wall fan of size 18inch, 0.25 HP, single phase , 250 volts complete all as specified and directed. Make :- Shyaam (cat no-SSPL/MT/140) / Sudhir or equivalent.

Dismantling old Exhaust fans of any type from any height and depositing it to MES store and Supply & fixing Flame proof Exhaust fan of size 18'', 0.25 HP, single phase, 250 volts including louvers of suitable size complete all as specified an directed . Make :- Shyaam (cat no-SSPL/MT/140) / Sudhir or equivalent.

Lightning Protection Schedule

M&L in repairs for Air termination single pointed aluminium rod 12 mm dia and 300 mm long fixed to one end of GI pipe of dia 40mm fixed with suitable size of flat iron clamps , bolts nuts and washers etc complete all as specified and directed by Engr-in-charge.

M&L in repairs for Aluminium strip 25x3 mm with bakalite saddles fixing at specefied distance along with screws etc for roof conductor above test point complete all as specified and directed by Engr-in-charge.

M&L in repairs for GI strip 32x6 mm continuity condoctor fixed to wall on batten or recessed or buried in ground or drawn in conduit/pipe or fixed to pole or any other indicated situaton for loop earthing etc. complete all as specified and directed by Engr-in-charge.

Material and labour for earthing with copper earth plate electrode 600mm x 600mm x 3mm thick, burried directly in ground vertically to a depth of not less than 2.25 mtr below ground level connected to copper strip 20x3mm thick, by means of copper brazzing made out of copper steel and 40 mm dia GI pipe "light grade" for protection of earth lead and connected to control board or transformer neutral earth or as directed including earthing pit of size 450x450x300mm (outer size) wall thickness 100mm made in PCC (1:3:6) type C-1 and pre-cast reinforced cover slab of size 450mm x 450mm x 80mm thick made with MS XPM Jalli, RCC (1:1.5:3), with one handle made out of 8 mm dia round bar, 20mm dia GI pipe 'light grade' for watering funnels, wire mesh and provided charcoal or coke of alternative layers of 15 cm including necessary earth work of size 300x900mm, depth 2.50mtr and testing complete all as specified and directed.

M&L for earth test point block made out of gun metal or phosphrous bronze size 75x75x25mm drilled and screwd including 3 nos, 8 mm dia 25 mm long hexagonal head screw complete all as specefied and directed.

M&L for GI tubing medium grade of size 40mm dia laid in trenches /under roads /drain /roofs/fixed to poles , walls etc with suitable size flate iron clamps , nut bolts and washers etc all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation of poles stays laying of electric cables, pipes etc and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and directed.

Removing excavated material soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed

Supply and fix cross arm bracing support clamps and back plates fabricated from steel section including nuts, bolts. Washers,welding , bending cold or hot frilled holes of any shape or size as indicated or directed

PCC (1:2:4) type B-2 using 20mm graded stone as in coping , bed plates, kerbs including weathering slightly rounded or chamfered angles and throating etc all as specified and directed.

UNICON (BID ID -3067404)

S.R.M.K Enterprises (BID ID -3078907)