REPAIR/MAINT OF DISTRIBUTION WATER SUPPLY PIPE LINE NETWORK AND ALLIED WORKS IN OTM AND MD ACCN OF DIPATOLI MIL STN UNDER GE DIPATOLI

Amount

Excavation in trenches n. exc 1.5 m width and not exc 1.5 mtr in depth for laying/taking out of pipe in soft/loose soil, complete all as specified and directed.

Returning/filling in trenches including spreading leveling, watering and well ramming in layer not exc 25 cm thick , complete all as specified and directed.

Removal of excavated surplus soil n. exc 50 m and depositing where directed at level n exc 1.5 m above the starting point complete all as directed.

Taking up or down steel tubing and connections including cleaning for refixing or remove to MES store of following sizes, complete all as specified and directed.( Note earth works measured and paid separeately ) (a) 15 MM bore

(b) 20 MM bore

(c) 25 MM bore

(d) 40 MM bore

(e) 50 MM bore

Refixing old GI tubing with necessary connections in old or new positions (laid in Trenches, walls, ceiling, floors etc) with necessary required including cleaning new fittings as per SSR Part -1 following of sizes, complete all as specified and directed. (a) 15 MM bore

(b) 20 MM bore

(c) 25 MM bore

(d) 40 MM bore

(e) 50 MM bore

Supply & Fixing in repair G.I tubes med grade Galvanized with necessary fittings and clamps as per SSR Part -1 laid in trenches /wall/floors concealed or open execution, complete all as specified and directed.. (a) 15 MM bore

(b) 20 MM bore

(c) 25 MM bore

(d) 40 MM bore

(e) 50 MM bore

Supply and fix in repair stop valves, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe with unions and fixed complete with suitable size of fittings like unions, long screw with check nut for iron pipe incl taking down existing stop valve, complete all as specified and directed. (a) 15 MM bore

(b) 20 MM bore

(c) 25 MM bore

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends with union,long screw with check nut for iron pipe incl taking down existing gate valve, complete all as specified and directed of following sizes . (a) 15 MM bore

(b) 20 MM bore

(c) 25 MM bore

(d) 40 MM Bore

(e) 50 MM Bore

Taking up cast iron water mains including all fittings with spigot and socket ends and lead joint including burning out lead joint and recovering lead of CI pipe , complete all as specified and directed of following sizes:-( Note earth works measured and paid separeately ) (a) 80 MM Bore

(b) 100 MM Bore

(c) 150 MM Bore

Refixing of cast iron pipes with socket and spigot end in trenches with necessary fittings in any length including cleaning of following sizes complete. (Excavation and earth work will be measured & paid separately). (a) 80 MM bore

(b) 100 MM bore

(c) 150 MM bore

S&F Ductile Iron pipe with spigot and socket ends class k-7 suitable for Tyton joint in any length laid in trenches of following size , complete all as specified and directed. (a) 80 MM bore

(b) 100 mm bore

(c) 150 mm bore

Material and labour in repair for run lead joints of CI pipes of following sizes , complete all as specified and directed.:- (a) 80 mm bore

(b) 100 mm bore

(c) 150 mm bore

M&L in repair for Rubber gasket (Tyton) joint of following , complete all as specified and directed.. (a) 80 mm bore

(b) 100 mm bore

(c) 150mm bore

M&L drilling and tapping cast iron water mains in position for branch connections of following internal dia size complete all as directed at site. (a) 15 mm bore

S&F in repair DI Bends( any type radius and angles) tapers any type (straight bend increasing decreasing or double socket etc) tee pieces single branch Y junction, double branches cross ( all sockets or socket and spigot) collars caps and plugs suitable for socket and spigot type of any bore, complete all as specified and directed.

S&F in repair bib taps cast copper alloy with crutch or butter fly handle screwed down, screwed for iron pipe as per SSR pt -1 of size 15 mm bore, complete all as specified and directed..

Cutting the existing leakage/broken CI pipe in position for the following pipes and taking out the broken piece, including reqd excavation and earth work in any soil and fixing the new CI pipe and fittings with necessary joints all as, complete all as specified and directed.. Note :- 1. CI pipe and fittings will be measured & paid separately. 2. Lead/Tyton joints will be measured & paid separately (a) Up to 100 mm bore

(b) 150 to 200 mm bore

Supplied and fixed in repair ball valves high pressure of PTMTwith epoxy coated aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed of following size all as specified in SSR Pt I, complete all as specified and directed. (a) 15 MM Bore

(b) 20 MM Bore

(c) 25 MM Bore

S&F in replacement CI Sluice valve confirming to IS 14846 – 2000 PN-1.0 flanged ends stainless spindle of following sizes with necessary packing materials and nut bolts incl taking down existing sluice valve, complete all as specified and directed. (a) 80 MM bore

(b) 100 MM bore

(c) 150 MM bore

Dismantling of CI sluice valve complete for replacement of old UNSV spindle Gutka,'U' clamp, nut and bolt washer, rubber insertion sheet and gland of suitable size etc and making the sluice valve service able and re-fixing after , complete all as specified and directed. Note : S/S spindle shall be measured and paid separately under respective item.:- (a) 80 mm bore

(b) 100 mm bore

(c) 150 mm bore

Supply only S/S spindle suitable for following sizes of sluice valve, complete all as specified and directed. (a) 80 mm bore

(b) 100 mm bore

(c) 150 mm bore

M/L for 75 mm thick cement concrete1:3:6 type C2,using 40 mm stone aggregate finished even & smooth without using extra cement as in plinth protection etc, complete all as specified and directed.

M &L Brickwork with fly ash modular bricks, strainght or curved on plan exc 6M mean radious radius built in Cement mortar 1:6 complete all as specified and directed.

M&L applying two coats of exterior emulson paint on old surface (weather proof) using roller over after scraping surface by mechanical means and finishing the wall surfaces complte all as specified and directed.

Materials & labour for prepration of OLD plastered surface and finishing the surfaces of wall with wall putty and applying two coat of Oil Bound distemper over one Coat of Cement Primer of, any colour, complete all as specified & directed.

Materials & labour for prepration of OLD plastered surface and finishing the surfaces of wall with wall putty and applying two coat of Oil Bound distemper over one Coat of Cement Primer of, any colour, complete all as specified & directed.

S&F mild steel deformed or twisted bar (TMT bars) 10mm dia & over cut to length bent to shape required, including cranking, benching, spirally for hooking for columns, hooking ends and bending with and including MS wire (annealed) not less than 0.9 mm dia as specified, complete all as specified and directed.

All as per item No 64 above but 6 to 8 mm dia , complete all as specified and directed.

M&L for Providing, precast cement concrete Type B1 1:2:4 (20 mm graded aggregate) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, complete all as specified and directed.

M&Lfor 75 mm thick cement concrete 1:4:8 type D-2 using (40 mm graded stone agg) as in sub base , complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 using (40 mm graded stone agg) as in sub base complete all as specified and directed.

M & L Cutting holes exe 150 Sqcm but n exe 400 Sqcm into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, complete all as specified and directed.

Supply and fix PVC Pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc. 110 mm bore as in waste and rain water pipes complete all as specified & directed.

Supply & fixing pressed steel frames for doors with one or more rebates including necessary fixing lugs lugs, hinges, lock strike plates etc completed size of frame 105x60mm made out of 1.25mm MS sheets complete all as specified & directed.

Supply and fix 30 mm thick flush shutter solid core construction with particle board and plywood face panels commercial type on both side complete all as spfd and directed.

Supply & fix 125mm size aluminium alloy handles cast type anodized complete all as specified & directed.

S&F aluminium tower bolts 150mm long, of extruded section complete all as specified and directed. .

Supply & fix Aluminium. Sliding door bolts, plate type, complete, 250mm long complete all as specified and directed.

M&L preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling wall and ceiling board (fibre,pulp,insulations etc) or insulation board any thickness including cover fillets complete all as specified and as directed.

M&L Anodised alumunium snap grid frame work for false ceiling grid of size 605mmx605mm complete hanges from GI wire complete all as specified and as directed.

S&F 4mm thick texture finish type ceiling board fixed to timber/metal framed work with screw as in ceiling snap grid complete all as specified and as directed.

M & L for 12 mm thick Prelaminated particle board, interior grade, prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over incl 20mm thick cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and incl screed bed of CM 1:6 complete all as specified and directed.

M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and incl CM 1:4 complete all as specified and directed.

S & f in repair Vitreous China urinals, half stall , complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 60gms) and fitted with waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms/40mm-60 gms), complete all as specified and directed.

S&F 60 mm thick Machine pressed precast concrete coloured interlocking paver block any shape and size confirming to IS 15658-2006 , M-40 Grade with grey cement and no pigment complete all as specified and directed.

M/L 75 mm thick cement concrete 1:4:8 type D-2 using (40 mm graded stone agg) as in sub base complete all as specified and directed.

M&L supply and laying of sand including spreading, levelling and ramming in layers n.exc. 25 Mm thick in each layer complete all as directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and directed.

M&L rendering 15 mm thick in cement mortar 1:4 on wall of brick work or concrete surface, finished fair and even all as specified and directed.

M&L for preparing the new plastered surfaces of wall and applying Two coat of cement based paint after one coat of white primer all as specified .

S & F Chequered cement concrete tiles 20cmx20cmx25mm thick, set,jointed and pointed in neat cement slurry in floors including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishesCM 1:4, complete all as specified and directed.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing , complete all as specified and directed.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, complete all as specified and directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick cement screed bed or bedding layer in CM 1:6, complete all as specified and directed.

M & L Glazed ceramic tiles in vertical surfaces 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:4, complete all as specified and directed.

arics infrastructure

M/S SURYA BUILDERS

united builders