Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.6 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹28.4 L+₹2.6 L (10.0%)Rejected-Finance SR NO 165 OPPOSITE YASH HOSPITAL DP ROAD MALWADI PUNE MAHARASHTRA 411028 | PUNE | MAHARASHTRA | 411028 | L2 | Rejected-Finance NOT BEING LOWEST | |
| 3 | L3₹32.1 L+₹6.3 L (24.5%)Rejected-Finance | L3 | Rejected-Finance NOT BEING LOWEST |
Tender Value
Refer Docs
EMD Value
₹64,000
Closing Date
28 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R AND D GIRINAGAR PUNE 411025
GE I R AND D GIRINAGAR PUNE 411025
RENOVATION OF TOILET BLOCK NEAR ROOM NO 225 2ND FLOOR AND ROOM NO 327 3RD FLOOR OF MAIN BLDG NO P 74 AT MILIT AND PROVN OF CERTAIN REVENUE AND MINOR WORKS AT MILIT GIRINAGAR PUNE 411025
2023_MES_630973_1
GE I R AND D GNR TOKEN 82 OF 2023 2024
Open Tender
Civil Works
Works
120 days
GE I R AND D GIRINAGAR PUNE 411025
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE I R AND D GIRINAGAR PUNE 411025
₹64,000
12 Apr 2024
4 Dec 2023
1 Jan 2024
4 Dec 2023
28 Dec 2023
9 Dec 2023
4 Dec 2023 - 9 Dec 2023
Amount
B&R PORTION Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as specified and directed.
M&L for roughening surfaces of old concrete floor of sunken portion by picking, sweeping, cleaning and washing down with water to remove dust etc and brushing with neat cement slurry @ 3Kg/sqm complete all as specified and directed.
M&L for Rendering 10mm thick in CM 1:4 on concrete surfaces finished even and smooth with using extra cement mixed with and approved water proofing compound @ 3% weight of cement and applying two coats of Roff Hyguard EX Rezone Chemicals or equivalent make complete all as specified and as directed.
M&L for PCC 1:5:10 type E-2 (using 40mm graded brick aggregate) lean concrete for filling sunken floor complete all as specified and directed.
Material and labour for coloured non skid ceramic tiles of size 400mm x 400mm x 7mm thick of any colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 15mm thick screed bed in cement mortar (1:4) as in floors complete all as specified and as directed.
M&L for coloured glazed ceramic tiles of size 600mm x 300mm x 7 to 8mm thick of any colour and pattern as approved by GE, as in vertical surface, set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick screed bed in cement mortar 1:3 complete all as specified & directed.
M&L for coloured glazed ceramic highlighter tile of size 600mm x 300mm x 7 to 8mm thick, any colour and pattern as approved by GE, as in vertical surface set and jointed in neat cement slurry using grey cement and pointed in coloured cement to match the colour of tiles over and including 10mm thick screed bed in cement mortar 1:3 etc complete all as specified & directed.
Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as specified & directed.
S & F for factory made solid Panel PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 4mm thick moulded PVC sheet on the front face and 4mm moulded prelam colour PVC sheet on back face wirth wood free EPS, fixed in frame at site as per manufacturer's instructions including fittings complete all as specified and as directed.
Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick plain colour PVC sheet, reinforced with mild steel square tube complete all as specified and as directed.
Taking down shutters of any description, area exc.1 sqm and not exc. 2 sqm each complete all as specified & directed.
Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm but not exc 4 sqm each complete all as specified & directed.
S & F for 30mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including second class hard wood plain cover fillets 35X6mm all around the shutters complete all as specified and as directed.
Supply and fix for aluminium powder coated louvered ventilator with provision of exhaust fan using ‘Jindal” aluminium section or equivalent make as specified including glass 3mm thick ordinary quality, frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc complete all as specified and directed.
S & F for 300mm long brass sliding door bolts with sand or die cast brass hasp, staple (bolt type) and fixing bolt with roller or drawn brass bolts complete all as specified and as directed.
S & F for 200mm long aluminium anodised, barrel tower bolts of extruded section, complete all as specified and as directed.
Supply and fix for 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed.
Supply and fix in repairs for vitreous china coloured wash down water closet (pedestal pattern) cascade type ‘P’ trap, in built seat cover and flushing cistern low level, valveless symphonic action type complete with inlet ball valve, float and handle complete all as specified and as directed. Make :- Hindware , catalogue No. 20028/ 20024 Constellation, 21038 cistern, pastel (complete set) or equivalent from specified makes as approved. Note :- If Cat No. is revised, equivalent cat No. from latest catlauge shall be considered.
Dismantling of stone slabs, cudappah, of any description or thickness in floor/fixed to walls, apron etc laid bedded and pointed in cement mortar complete all as specified & directed.
M&L machine cut Granite slab 18 mm thick as in steps, pillars, window cills, cooking plateforms and like and incl 10mm thick (avg thickness) cement mortar 1:4 screeding and setting coat in cement morter 1:2, 3mm thick, set and jointed with white cement sturry mixed with pigment to match the shade of slab incl cutting, waste, rubbing and polshing etc complete all as specified & directed. Note:- (i) The rate of granite stone shall be deemed to incl for full rounded off corner/edges incl all cutting to make it square or rectangular. (ii) The rate shall also be deemed to incl for cutting and polishing machine and granite polishing to achive the desired granite finish complete all as specified and directed.
Labour only for full round moulding to 18 to 20mm thick granite slab complete all as directed by Engr-in-charge.
M&L for Machine cut cudappah stone slab 20 to 25mm thick over screed base in cm 1:6, laid and jointed & pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling of existing stone slabs/ tiles of any description or thickness and removing rubbish off the premises complete all as specified and as directed.
S&F in repairs Counter top Wash hand basin, vitrous china, coloured flat back of size 565X425X140 mm including brass waste coupling, CP bottle trap 32mm size with 250mm & 190mm long wall connection pipe & wall flange, 15mm dia fancy type single lever tall boy swan neck pillar tap with 150mm extention body fixed spout without popup waster system with 600mm long braided hoses complete all as specified and directed.
S&F in repair Vitreous china Urinal, full stall type, white with waste pipe and CP brass spreader complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement; flush pipe, grating and union for discharge pipe including CP Urinal spreader for fixing with 15 mm dia pipe complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets/AC boards, any thickness, including cover fillets complete all as specified and as directed.
M&L for Anodised aluminium snap grid frame work of size 605 X 605 mm for false ceiling complete all as specified and as directed.
M&L for 12 mm thick perforated particle board/tiles for insulation and accoustic purposes, 60 x 60cm in size fixed with nails to timber frame work or with staples on snap grid including 4 mm dia GI mild steel plain wire complete all as specified and directed.
S & F in chromium plated faucet health (hand jet) 15mm bore with fittings, and including two way bib tap and accessories complete all as specified and directed.
S & F stainless steel grating doom 125mm dia complete all as specified and directed.
S&F in repairs Chromium Plated Toilet Paper Holder complete all as specified and as directed.
S & F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf corner type three tyres with chromium plated brackets, bracket guard and railing 30cm size including screws complete all as specified and directed.
S&F in repairs Chromium plated Jet Spray with CP connection pipe for EWC 15mm bore with fittings complete all as specified and directed.
S&F in repairs 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball brass valves, high pressure, with polythene float and fly- nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
S & F in repairs for 15mm dia CP angle cock complete all as specified and as directed.
S & F for 15mm dia PVC connection 450mm long including PTMT check nuts etc complete all as specified and as directed.
S & F in repair for 15 mm bore bib taps chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as per Cat No.PIS-06 (Neptune Series) of make Prayag or equivalent complete all as specified and as directed.
S&F in repairs for 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall or floor etc using synthetic rubber adhesive cement solvent complete all as specified and directed .
S&F in repairs for 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall or floor etc using synthetic rubber adhesive cement solvent complete all as specified and directed.
S&F in repair for Stack clamps for bore (any dia) of pipe out of 50 mm by 5 mm flat iron and 16mm dia round iron stays,100mm including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.
S&F for 75mm dia PVC (SWR) bends any radius with access door complete all as specified and directed.
S&F for 110 mm dia PVC (SWR) bends any radius with access door complete all as specified and directed.
S&F PVC (SWR) junction double ( single T) of size 110mm bore jointing with solvent cement all as specified and directed.
S&F PVC (SWR) reducer 110mm to 75mm bore jointing with solvent cement all as specified and directed.
S&F for 110mm dia PVC (SWR) vent cowl complete all as specified and directed by Engineer -in-charge.
S&F for 75mm dia PVC (SWR) vent cowl complete all as specified and directed.
S&F for 75mm dia PVC (SWR) junction single (single T) complete all as specified and directed.
M&L for PVC (SWR) floor trap, plain with grating including jointing with solvent cement outlet dia 75mm complete all as specified and directed.
S&F soap dish any type fixed type fixed to plugs with chromium plated brass screws complete all as specified and directed.
Taking down 15mm bore steel water tubing and connections complete all as specified and directed.
S&F 15 mm bore steel water tubing, ‘medium grade’ galvanised, with and including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
Taking down 20mm bore steel water tubing and connections complete all as specified and directed.
S&F 20 mm bore steel water tubing, ‘medium grade’ galvanised, with and including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
S&F Gun metal globe or gate valve with iron wheel head screwed both ends size 20mm for iron pipe, fixed complete all as specified & directed.
M&L for cutting chases, pinning in stone, concrete block walls and making good to facings where required and pointing in cement mortar 1:3 to concealed water tubing and making good (Cutting not exceeding 10 cm girth) to disturbed surfaces as per existing finish complete all as directed by Engr-in-Charge.
S&F in repairs 60 cm long SS tubular towel rail 20-mm dia complete all as specified and directed.
M&L for preparation of new wooden surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F stainless steel chromium plated 6 Pin, 45 Cm to 60 Cm long hanger fixed to wall with screws complete all as specified and as directed.
M&L for 1 mm thick stainless steel letter in English 150mm high fixed on any surface and any height including necessry scaffolding etc complete all as directed by Engr-in-Charge. Width of each letter should be in proportionate with heigth of letter complete all as directed by EIC.
Excavation in trenches not exc 1.5m wide and not exc 1.5m deep and getting out in soft/loose soil complete all as specified and as directed.
M&L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.
M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) exc10 cm in width and setting in CM 1:6 complete all as specified and as directed.
M&L 25 mm thick Cement concrete 1:2:4 type B-0 using (12.5 mm graded stone aggre) as in sub base of floor complete all as specified and as directed.
M & L for 75 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base or simillar works complete all as specified and directed .
M&L for 304 grade stainless steel work as in railing ,pipes with baluster made of hollow tubes, channels, plates, etc with hand rail, baluster, including cutting, Stainless steel welding, cutting, buffing, grinding, polishing and corrosion resistant, fixing of stainless steel pipe with baluster with necessary all acessories, on concrete/wall surface with 6 mm thick plate and 10 mm dia dash through fastener complete all as specified and directed.
Returning filling in, well watering ramming in layers not exceeding 15cm thick complete all as specified and as directed.
Removing of excavated soil to a distance not exc 50mtrs and depositingwhere directed at a level not exc 1.50 mtrs above the starting point complete all as specified and directed by Engr-in-charge.
M & L for 1 mm thick stainless steel letter in English 300 mm high fixed on any surface and height including necessary scaffolding etc complete all as directed by Engr-in-Charge. Width of each letter should be in proportionate with heigth of letter complete all as directed by EIC.
M & L for 1 mm thick stainless steel letter in English 450 mm high fixed on any surface and height including necessary scaffolding etc complete all as directed by Engr-in-Charge. Width of each letter should be in proportionate with heigth of letter complete all as directed.
M & L 316 grade( SS-CH 316-10 MM) stainless steel chain (wt of chain shall be 2.05 kg per running meter), corrosion resistant, tested for breaking loads, work as in railing or ladder or any other similar type of work of any shape and size including necessary cutting, welding and fixing the same with SS pipe complete all as specified and as directed.
S & F SS strip 18 mm wide ' T ' gold plated colour as in wall panelling complete all as directed by Engr-in-Charge.
S& F 1 st Class Hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.
M & L for 5 mm thick figured glass pin head type and glazing with oil putt/beading/screws as required at site with wooden/timber frame exc 0.5 Sqm in each pane complete all as specified and directed.
M & L for solar control film 25 micron reflective type sticked to glass panes as per manufacturers instructions and directed by Engr-in-Chage.
M&L French polishing on surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler on old/new works with one or more coats complete all as specified and directed.
S&F 18mm thick prelaminated particle board interior grade, conforming to IS-12823, Gde-I prelaminated both side with decorative choice lamination as in cupboard shutters, Kitchen cabinets etc fixed with screw including 3mm thick, Ist class HW(TW) beading all around on edging to timber frame work complete all as specified and directed.
M&L 2nd class hard wood as in plain fillets square, clean sawn exc 13 sqcm but n.exc 25 sqcm in section, fixed with nails complete all as specified and directed.
M&L in 4mm thick veneered decorative plywood, grade1 (with BWR resin) with decorative face veneers on both faces; fixed with brass screws and cups to timber frame-work complete all as specified and directed.
S&F 40 mm thick Decorative 1 st class hardwood (Teak wood ) Carving stucture designed flush shutters with solid core construction,chemically treated with good strength ,commercial type with aesthetical appearence finishing with alround decorative carving structure beading to chowkhats using oil, wax, M polishing with complete all as specified and as directed by Engr-in-Charge .
M & L for oil,wax and final Melamine natural colour polishing coat as in flush shutters complete all as specified and as directed by Engr-in-Charge.
S & F carving structured beading alround to chowkat area of size 5 inch wide complete all as specified and directed.
S & F carving structured beading alround to chowkat area of size 2 inch wide complete all as specified and directed.
M & L for brass golden colour 9 inch body ,60 mm length premium mortice door handle lock with 4 latches,10 pin dimple key technology and bolt size backset 50 mm with one side key and one side knob with rectangular dead bolt , rose handle suitable for 30 to 40 mm door shutters, long life, anti rust, anti junk material and design for long time, complete all as specified and as directed.
S&F 150 mm size brass golden colour door handles, spiral type, cast type, polished bright complete all as specified and directed.
S&F 200 mm long brass golden colour barrel tower bolt, cast type, polished bright complete all as specified and directed.
S&F in brass golden colour heavy duty floor door stopper antique 5 inch mounted with rubber bottom,slip resistant on tiles, fixed in floor complete all as specified and directed.
Surface dressing nexc 30cm deep and averaging 15cm deep in soft and loose soils complete all as specified and directed.
M&L for 15 mm thick rendering in CM 1:6 on fair faces of brick work & concrete surfaces, finished even and smooth without using extra cement complete all as specified & directed.
M&L for 15 mm thick rendering in CM 1:4 on external wall surfaces and finished even and smooth without using extra cement complete all as specified & directed.
M&L for preparation of new plastered wall surfaces and applying two coats of oil bound distemper on & including chalk white primer complete all as specified and directed.
M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/Litre and UV resistance as per IS 15489:2004, Alkali & Fungal resistance exterior paint of required shed (Company Depot Tinted) with silicon additives @ 1.43 Litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 Lit/sqm over new/old surfaces including complete removal of existing paint by bio wash, necessary scaffolding required for painting work, safety measures etc complete all as specified and directed.
Spreading,levelling,watering and well ramming the earth filling under floor not exc. 25cm thick in layers complete all as specified and directed.
M and L for coloured Non skid ceramic tiles7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but n exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the floor laid with & over 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
M and L for coloured Glazed ceramic tiles 350X250mmX7mm/450x350x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the floor as on vertical surfaces laid with & over 10mm thick cement screed in CM 1:4. complete all as specified and directed.
S&F vitreous China wash down water closet pan, (pedestal pattern), 'P' trap white, with and including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed.
S&F in repairs 10 liters capacity PVC low level flushing cistern with ISI marked body, fixed in repairs complete all as specified and directed.
S&F Cromium plated brass bib cock, cast copper alloy with capston headed handle, screwed down screwed for iron pipe or for brass ferule of 15mm dia complete all as specified and directed.
S&F 15 mm bore stop valves, cast copper alloy, chromium plated, with long shank and cup (concealed type) fancy type screwed down, high pressure, with crown head, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F Stop valve cast copper alloy screwed down high pressure with capstan head, handle chromium plated angular type screwed both ends for iron pipe 15 mm bore or for unions complete all as specified and directed.
S&F 100mm dia CP grating for nahani traps with or without hole for waste pipe complete all as specified and directed.
S&F brass chromium plated shower rose of 125 mm size with swivel joint including fixing to steel pipe or union complete all as specified and directed.
S&F pillar taps 15 mm, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F of 110mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joint fixed to walls complete all as specified and directed.
S&F of 75mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joint fixed to walls complete all as specified and directed.
S&F PVC (SWR) junction single ( single T) of size 110mm bore jointing with solvent cement complete all as specified and directed
S&F PVC (SWR) gully trap 125/110 , setting and jointing to waste pipe fixed in cement concrete 1:2:4 type B1 63 mm outlet dia complete all as specified and directed.
S&F 100mm long butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.
S&F Aluminium anodised barrel tower bolt of extruded section of 150mm complete all as specified and directed.
S&F Aluminium handles cast type anodised of size 150mm complete all as specified and directed.
S& F 250 mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.
S&F 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball brass valves, high pressure, with polythene float and fly- nut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
S&F factory made solid panel PVC door shutter with MS square tube 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC sheet stirip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top,lock and bottom rail on either side & as gap insert for top rail & bottom rail .panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement S&F in the frame at site as per specification.complete all as specified and directed.
Supply only 3mm thick frosted one side sheet glass ordinary quality in square n exc 0.5 sqm each pane in new glazed shutter all as specified and directed.
S&F brass chromium plated tubular towel rail 20mm dia complete all as specified and directed.
S&F wash hand basin vitreous china (flat back) any size including cutting for and pinning in ends of brackets complete size (550 x 400mm) complete with brass CP waste cupling & waste pipe all as specified and directed.
M&L PCC 1:3:6 type C1, 75 mm thick finished even and smooth without using extra cement as in plinth protection including forming of joints 10mm wide and 75mm deep and joint filled with bitumen and sand mixture in 1:1 ratio complete all as specified and directed.
S&F steel work in tubular /square/rectangular trusses ,cantileve,purlin staging including special shaped washer etc. complete using ERW or induction butt welded tubes confrming to IS 1161-1979 grade St-240 as in purlin ,rafter etc complete all as specified and directed.
M&L for MS framed work of angle, tee, F.I conforming to Fe-290 (Gde E-165), as in stucture for water tank, Wind ties etc including welding complete all as specified and directed.
M&L for preparation of new steel surfaces and applying two coats of synthetical enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mps as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed.
S&F Steel ventilators with top hung shutter including hinges, steel peg stay , complete all as specified and directed.
Cutting into existing manholes for connecting new drains internal dia of pipe 200mm making good to pipe & to or finished and reforming benching as required. 3/4 section in cement concrete (1:2:4) type B-1, smooth cutting out existing benching for forming branch channel (1/2) rendering complete all as specified and as directed.
Surface excavation n.exc. 30 cm deep and averaging 15 deep and getting out in any type of soil complete all as specified and directed.
M & L for Earth work in excavation by mechanical means (Hydraulic excavator) means over areas in any type of soil(exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer- in-charge.
M & L for removing excavated materials to a distance exc 250m but n.exc 500m and deposited where directed in soil all as specified and directed.
M&L for 100 mm thick Hardcore (broken stone or boulders) of gauge not exc. 63mm deposited, spread and levelled in layers not exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-In-Charge.
Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.
M&L for cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in kerbs or copings and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified & directed.
(E/M PORTION) Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc. complete all as directed by Engineer-in-Charge.
Taking down of old unserviceable sub main wiring of any type complete all as specified and as directed.
Taking down the existing unserviceable main switch / cut out / DBs of any type /metal plug & socket capacity / description as existing at site including necessary making good the disturbed surfaces to match with the existing finishes all as specified and directed.
M&L Point wiring complete with 1.5 sqmm single core PVC insulated and unsheathed cable 1100 volts, FRLS grade with multistranded copper conductor ISI marked drawn through PVC concealed conduit / PVC casing caping as per requirement fixed to walls / roofs / floors / ceiling etc. and including provision of PVC conduit / PVC casing caping as required, 1.5 sqmm stranded copper conductor cable as earth continuity conductor and connected to common earth dolly, including cutting and chasing, modular cover plates and modular flush boxes, Plate for mounting for housing the switches, socket outlets, fan regulators etc, all as specified and as directed. Note : Cost of cutting chases as per requirement & making good the disturbed surfaces to match with existing finish shall deemed to be included in quoted rate. (a) One light point controlled by one way switch all as specified and as directed.
(b) One fan/exhaust fan point controlled by one switch and one regulator all as specified and as directed.
(c) One 3 pin switch socket outlet point 5 Amps on same board with other switch all as specified and as directed.
(d) One 3 pin switch socket outlet point 5 Amps on independent board all as specified and as directed.
All as per item No 133.00 above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 sqmm size all as specified and as directed.
S & Fix modular switch 1 way 6A, 1 module all as specified and as directed.
S & Fix modular switch 1 way 16A, 1 module all as specified and as directed.
S & Fix modular socket out let 6A, 2/3 on combined 2 module all as specified and as directed.
S & Fix modular socket out let 6A/16A, 2/3 pin combined 2 module all as specified and as directed.
S & Fix of recess mounted 2' x 2' square LED panel 36 watts, Ultra modern recess mounting luminaire with high performance LEDs suitable for mounting with Armstrong Grid ceiling all as specified and as directed.
S & Fix LED batten 10 Watts with aluminium housing & integrated electronic driver including necessary electric connections 3 core 1 sqmm insulated copper wire from ceiling rose to tube light fitting complete all as specifed and directed by Engineer-in-charge.
Taking down the defective ceiling fan / Exhaust fan of any sweep and make after disconnecting electrically & mechanically and examine & carry out the servicing/overhauling the ceiling fan by thoroughly cleaning the bearing, shaft, stator, rotor & applying the lubricant / grease to the bearing including applying one coat of painting re-fixing, testing in all respect for smooth running complete all as directed.
S&F exhaust fan, AC, single phase, 240 V, 300 mm sweep, metal body with metal blades metal louvers, including connected with 3 core 1.5 sq mm copper conductor cable from ceiling rose to exhaust fan all as specified and as directed.
M&L for submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable , multistranded on the surface through and including suitable size of PVC conduit with its accessories all as specified and directed by Engr-in -charge for the following :- (a) 2x6.0 sq mm and 1x6 sq mm as earth wire
S & Fix sheet metal enclosure distribution board SPN, 4 ways 240 volts, with 200 amps rated bus bar, with IP 43 protection and double door, suitable for mounting MCBs all as specified and as directed including taking down old MCB DB complete all as directed.
S & Fix of MCB single pole and neutral, 240 volts, 6 to 40 Ampere, rupturing capacity 10 KA, ‘C’ series complete all as specified and directed.
S & Fix of MCB single pole, 240 volts, 6 to 40 Ampere, rupturing capacity 10 KA, ‘C’ series complete all as specified and directed.
Supply and fixing 18/20 Watts LED plastic Batten 4 feet (white / warm white as directed) with acrylic cover sleek design & high efficency for wall and surface mounted applicaiton with necessary braket, clamps, including bolts, nuts & washers for fixing arrangement etc complete all as specifed and directed.
M & L Earthing complete with galvanised steel earth plate electrode 60x60cmx06mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed. NOTE :- Cost of earth lead & protection pipe upto 7.5 M shall deemed to be included in quoted rate.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sq mm 4 core complete all as specified and directed.
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth and getting out in Soft / loose soil including forming bottom surface etc. complete all as specified and directed.
Returning, filling in including spreading, levelling ,watering and well ramming in layers not exceeding 25 cm thick in soil complete all as specified and directed.
Removing excavated material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 50 mtr above the starting point complete all as specified and directed.
Supply & Laying 50 mm outside dia double wall corrugated pipe (DWC) of HDPE ISI Mark for enclosing cable below ground / road surface, to a required depth, including suitable size coplers for jointing of pipe all as per site requirement complete all as specified and directed.
S & Fix double door sheet metal enclosure distribution board SPN, 12 ways 240 volts, with 200 amps rated bus bar, with IP 43 protection and double door, suitable for mounting MCBs complete all as specified and directed.
M&L for submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable , multistranded on the surface through and including suitable size of PVC casing casing with its accessories all as specified and directed by Engr-in -charge for the following. (a) 2x6.0 sq mm and 1x6 sq mm as earth wire complete all as specified and directed.
M&L for grove cutting on floor/walls for laying of conduit and providing of channels / granite for closing of the grove all as specified and directed.
M&L for machine cut granite stone slab 18-20 mm thick (of any colour/type) (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, floors etc and like fixed in cement motor (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
M/S P D TUPE
Mehta and Co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .