GE (N) P/TOKEN- 15 OF 2023-2024 REPAIRS/REPLAC OF INTERNAL ELECT, FITTINGS AND FIXTURES INCLUDING SUBMAIN WIRING AND DBS IN MD ACCN AND OTM OF GHORPADI AREA(GHORPADI,VISHWAMITRA MARG,VICTORIA ROAD, SUB AREA ETC ) OF AGE E/M (N) UNDER GE (N) PUNE

Amount

Taking down carefully aluminium point wiring (light, fan, socket or power), complete (fitting such as switches,ceiling rose, pendent, regulators etc) removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately and making dood disturbed surfaces of wall by plastering disturbed surface smooth by applying two coats of same colour paint as existing, floor etc. complete all as specified and as directed.

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as existing at site including MCBs any type and capacity making good the disturbed surfaces by plastering disturbed surface smooth by applying two coats of same colour paint as existing to match with the existing finishes complete all as specified and as directed.

Taking down the existing unservicable sub main wiring of any type / description as existing at site including making good the disturbed surfaces by plastering disturbed surface smooth by applying two coats of same colour paint as existing to match with the existing finishes complete all as specified and as directed.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade with proper colour coding ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit including all accessories including chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH green cable as earth continuity conductor to common earth and connecting to earth dolly with copper lugs complete all as specified and directed for the following :- Note :- Rates quoted are inclusive of cutting chases & makes good surfaces.

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

(d) One bell point controlled by one, bell switch 5 Amps

(e) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

(f) One light point controlled by two 2 way switch.

All as per item No 4 above but with multistranded copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded cable 1100 Volt grade ISI-694 marked including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth with copper lugs complete and connecting to earth dolly.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with GI sunken /surface boxes 1.2 mm thick, 60 mm deep with earth dolly duly as per site requirment , covered with modular white cover plate with frame suitable for modular switches, or PVC surface mounted modular box, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth with copper lugs and connecting to earth dolly complete all as specified and directed for the following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

(d) One bell point controlled by one, bell switch 5 Amps

(e) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

(f) One light point controlled by two 2 way switch.

All as per Item No. 6 above but with multistranded copper conductor 2.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed multistranded FRLSHH cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with mild steel sunken boxes 1.6 mm thick, 60 mm deep with earth dolly duly, covered with hylem sheet cover 3 mm thick, ISI marked suitable for fixing of switches, fan regulators and sockets including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth with copper lugs complete and connecting to earth dolly complete all as specified and directed for the following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

(d) One bell point controlled by one, bell switch 5 Amps

(e) One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

(f) One light point controlled by two 2 way switch.

- Ditto- all as per item No. 8 above but with multistranded copper conductor 2.5 Sq mm (nominal area), single core, PVC insulated and unsheathed multistranded FRLSH cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth with copper lugs complete and connecting to earth dolly.

S & F for Modular Switch piano flush type, single pole, one way, and 6 Amp complete all as specified.

S & F for Modular Switch piano flush type, single pole, one way, and 15 Amp complete all as specified.

S & F for Modular Socket outlet 5/6 Amp and 2 module complete all as specified.

S & F for Modular Socket outlet multipurpose having provision for 3 pin, 15 Amp and 3 pin, 5 Amp, piano flush type complete all as specified.

S & F for modular step type fan regulator 120 watts single module suitable for operation on 230 volt 50 HZ AC supply complete all as specified and as directed

S & F for modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

S & F for for Bell push modular 6 Amps complete all as specified.

Suply and fix for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

S & F for for Lamp holder, PVC body of brass suitable for batten fitting completes all as specified.

S & F for Ceiling rose, surface Bakelite suitable ISI marked for batten fitting complete all as specified

S & F for Switch piano flush type, single pole, one way, and 6 Amp complete all as specified.

S & F for Switch piano flush type, single pole, one way, and 15 Amp complete all as specified.

S & F for Switch socket combination, 2 in 1, 3 pin 5 and 15 amp flush type universal as directed.

S & F for Socket outlet multipurpose having provision for 3 pin, 6 Amp and 2 pin, 6 Amp, piano flush type complete all as specified.

S & F for Socket outlet multipurpose having provision for 3 pin, 15 Amp and 3 pin, 5 Amp, piano flush type complete all as specified.

S & F for Bell push 6 amp 230 volt 50 HZ AC supply complete all as specified and as directed

S & F for modular type mobile charging socket double module for mobile charging USB type 1.5 amp 230 volt 50 HZ AC supply complete all as specified and as directed

S & F ceiling fan regulator socketed, step type, flush type heavy duty, 120 watts suitable to work on 230 volts Ac supply complete all as specified.

S & F for metal flush box made of GI sheet 1.2 mm thick, 60 mm deep with each terminal including necessary cutting in wall and POP work as required for matching existing slot in wall for following including removal of old unserviceable one complete all as specified and as directed.

1/2 module

3 module

4 module

6 module

8 module

12 module

S & F for PVC surface modular box with modular plates inner and outer with each terminal including necessary fixing arrangement of following module including removal of old unserviceable one complete all as specified and as directed.

1/2 module

3 module

4 module

6 module

8 module

12 module

S & F for modular plates white colour with frame of following module including removal of old unserviceable one complete complete all as specified and as directed

1/2 module

3 module

4 module

6 module

8 module

12 module

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with multistranded copper conductor of size 4.0 Sq mm nominal area and drawn through rigid PVC medium grade casing caping as per site requirement and its accessories including one run of PVC insulated 4.0 Sq mm (nominal area) multistranded copper conductor FRLSH cable as earth wire and connected from DB to DB/ main board complete all as specified and as directed. Note:- Two runs of 4 sqmm cable,one run of 4.0 sqmm cable and one run of heavy duty conduit/casing caping as per site requirement and accessories will be measured as one unit

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with multistranded copper conductor of size 6.0 Sq. mm nominal area and drawn through PVC medium grade casing caping as per site requirement and its accessories including one run of PVC insulated with 6.0 Sqmm (nominal area) multistranded copper conductor FRLSH cable as earth wire and connected from DB to DB/ main board complete all as specified and as directed. Note:- two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of heavy duty conduit/casing caping as per site requirement will be measured as one unit

M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLSH cable with multistranded copper conductor of size 10 Sq. mm nominal area and drawing into PVC medium grade casing caping per directions of EIC and its accessaries ISI marked heavt duty of suitable size including with two runs of PVC insulated 6 Sqmm (nominal area) multistranded copper conductor FRLSH cable as earth wire and connected from DB to DB/ main board complete all as specified and as directed. Note:- four runs of 10 sqmm cable, two runs of 6 sqmm cable and one run of PVC heavy duty conduit/casing caping as per site requirement will be measured as one unit.

M & L for Sub main wiring concealed in brick/stone masonary with approved colour coding as per IS with two single core PVC insulated FRLSH cable with multistranded copper conductor of size 4.0 Sq mm nominal area and drawn through concealed medium grade rigid PVC conduit and its accessories including one run of PVC insulated 4.0 Sq mm (nominal area) multistranded copper conductor FRLS cable as earth wire and connected from DB to DB/ main board complete all as specified and as directed. Note:- Two runs of 4 sqmm cable,one run of 4.0 sqmm cable and one run of PVC concealed conduit and accessories will be measured as one unit

M & L for Sub main wiring concealed in brick/stone masonary with approved colour coding as per IS with two single core PVC insulated FRLSH cable with multistranded copper conductor of size 6.0 Sq. mm nominal area and drawn through PVC medium grade rigid concealed conduit and its accessories including one run of PVC insulated with 6.0 Sqmm (nominal area) multistranded copper conductor FRLS cable as earth wire and connected from DB to DB/ main board complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6.0 sqmm cable and one run of PVC concealed conduit and accessories will be measured as one unit

S & F for MCB DB VTPN 4 way with provision for FP MCB/Isolator/RCCB etc as incommer and SP/TP MCBs as out going double door IP 43 complete prewired including Bus Bar including MCCB 63 Amps 4 pole for incoming etc suitable for operation on 415 volt 50 Hz AC supply including necessary provision for inserting the DBs double door with locking arrangement in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall with existing paint colour complete all as specified and as directed . Make - Schneider/Legrand/L&T/ABB.

S & F for sheet metal enclosure MCB DB TPN 4 way with 200 Amps rated bus bar 415 volts suitable for fixing double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall with existing paint colour complete all as specified and as directed. Make -Schneider/Legrand/L&T/ABB.

S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall with existing paint colour complete all as specified and as directed. Make - Schneider/Legrand/L&T/ABB.

S & F for sheet metal enclosure MCB DB SPN 4 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. Make - Schneider/Legrand/L&T/ABB.

S & F for MCB tripple pole and neutral rated capacity 63 Amps, 415 volts breaking capacity 10 KA complete all as specified and as directed. Make - Schneider/Legrand/L&T/ ABB.

S & F for MCB tripple pole and neutral rated capacity upto 40 Amps, 415 volts breaking capacity 10 KA complete all as specified and as directed. Make - Schneider/Legrand/L&T/ ABB.

S & F for MCB Single pole and neutral rated capacity 5 to 40 A, 240 volts breaking capacity 10 KA complete all as specified and as directed. Make - Schneider/Legrand/L&T/ ABB.

S & F for MCB Single pole rated capacity 6 to 40 A, 240 volts breaking capacity 10 KA complete all as specified and as directed. Make - Schneider/Legrand/L&T/ABB.

Supply and fix MCB Protected SRCD box 4 module 25 Amps with surface mounted PVC enclosure SRCD(socket residual current device) single pole with a three pin socket & top complete with 25 Amps MCB single pole complete all as specified and as directed. Make: Havells Cat part No DHDTCSN0251020 OR Equivalent Schneider/Siemens/Legrand.

Supply and fix for sheet metal enclosures single pole and neutral enclosure with a three pin and earth plug and socket complete with one MCB SP 20/ 32Amps including removal of old unserviceable one complete all as specified and as directed.Make - Scheinder/Legrand/L&T/ ABB

S & F for plastic body exhaust fan, AC single phase, 240 V of size 150 mm sweep with louvers (as per Cat Part No -698500 Ivory new of Make- Indo Asian or Bajaj Maxima DX/ Usha Striker) including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed

S & F for plastic body exhaust fan, AC single phase, 240 V of size 200 mm sweep with louvers (as per Cat Part No -698501 of Make Indo Asian or equivalent Make- of automberg, crompton/Havells/Bajaj)including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed

S & F for plastic body exhaust fan, AC single phase, 240 V of size 250 mm sweep with louvers (as per Cat Part No -698502 of Make Indo Asian or equivalent Make- Automberg, Bajaj Maxima DX/ Usha Crispair )including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable fan complete all as specified and as directed

S & F for wall/ceiling mounted LED 20/22 watts white/warm white as per site requirement with output of minimum 2000 lumens , box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 20 watts and taking down old unsv fitting complete all as specified and as directed. Make :- Halonix Cat part No HLB-03-20-CW-AL-SQ , Philips BN021C LED 22 S PSUCWGR, Jaquar LGLZUIX022XN.

S & F for wall mounted 20 watts indoor Inverter batten with opal diffuser, IP 20, with 3 to 4 hrs back up with out put of 2000 lumens , box type (decorative) light fitting, 230 volts with aluminium body and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 20 watts and taking down old unsv fitting complete all as specified and as directed. Make :- Halonix Cat part No.HLB-08-20-CW-INV or eqivalent.

S & F for LED down light recess mounted luminare, round/square type 15 watts as per site requirement with efficiency of 1500 lumens per watt, Series of downlighters with low depth round & larger dia, powder coated white finish with drop down PC diffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver suitable for office spaces sleek design white finish operating voltage 150 V-270 V AC, 50 Hz complete including taking down old unsv fitting all as specified. Make- JAQUAR Cat part No. LNEP01S015XN/LLCN01R01SXN, Halonix HLDLR31-15CW/ HLDLR-S27-15-CW,Philips DN296B LED 15S-6500 PSU WH.

S & F for recess mounted 2' x 2' square LED panel 36 watts, sleek design aluminium housing, polycarbibate diffuser white powder coated finish operating voltage 140 volts - 270 volts, AC, 50 Hz complete including taking down old unsv fitting all as specified and as directed. Make- Halonix HLFPR22-11-36-CW-37mm, Philips RC383B LED 4000 PSU ODWH PIR, Jaquar LULTU1S036XC.

S & F for wall/ceiling mounted 10 watts or more indoor, box type light fitting white/ warm white as per site requirement, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 2' x 10 watts and taking down old unsv fitting complete all as specified and as directed. Make :- JAQUAR Cat part No LGLZ01X010XN, Philips BN021C LED 12S 6500 PSU GR or Halonix

S & F for wall mounted LED 06 watts (WW) or more, 3000K with good color rendering (CRI>70) picture light fitting, 230 volts with durable aluminium housing and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, including taking down old unsv fitting complete all as specified and as directed. Make :-Philips model No. 30973 or Luker I-3, LIMR6 or Halonix

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 15 watts or above warm/warm white with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 0.6 to 0.9 mtr long bend to required shape with clamps, nut, bolts, incluing taking down old unsv fitting complete all as directed by Engineer- in-charge. Make :- Halonix cat no. HLSLD-09H-15-CWL-R, Havells LHETAXU7PA6S015, Jaquar LPCRSRT25WLC .

S & F for LED post top lantern 25 watt or above light fitting made of cast aluminium spigot housing with decarative opal acrylic diffuser with IP 65 protection white / warm white as per site requirement complete with all accessories fixed on GI pipe 50 mm dia including removal of old unserviceable one complete all as specified and directed. Make Halonix cat No. HLPT-S04-25-CW, ShaktiSZPGPMX025 or equivalent in jaquar (clear glass).

S & F Integral decorative LED bollard with aluminium [pipe housing, glare free PMMA diffuser with IP 65 protection suitable for 10 watts LED bulb with necessary elecrical connections with adequate size including removal of old unserviceable one complete as all specified and as directed. Make Halonix Cat Part No HLOB-27-10-CW-1M, Jaquar LBLDCONO10XW, Shakti SZPGRMX010 Rectroprism or equivalent in Havells

S & F for LED spot light suitable for operation on 230 volt 50 Hz AC supply Recess-mounted, COB-based, round xed LED downlight with 60 beam angle 08/09 watts or above white / warm white including driver as per sample including removal of old unserviceable one complete all as specified and as directed. Make Halonix Cat No. HLDLR-27-09-CW, Havells LHEBMKPFIHIW008, Driver LSSCRX1252, Jaquar LETSO1R010XC.

S & F for casing and capping size 50 mm including removal of old unserviceable one complete complete all as specified and as directed

S & F for casing and capping size 25 mm including removal of old unserviceable one complete complete all as specified and as directed

S & F for casing and capping size 20 mm including removal of old unserviceable one complete complete all as specified and as directed

Supply & fix in replacent decorative wall mounted energy saving 03 watt or above LED bedside light fitting flexible and adjustable to any direction with integeral electronic driver complete with all accessories. Cat Part No 48042 of philips black & metallic , Havells model Uneco or equivalent in Jaquar.

S & F in replacemet for Decorative wall mounted luminaire with opal glass with nickle finishing wall lamp with E27 lamp holder with and including LED bulb 10/11 watts complete all as specified and as directed. Make- Jaquar Cat part No - JNL-CHR-WLSL-55004E27 , HALONIX HHW048 08CF RF or its equivalent in Philips.

S & F for wall/ceiling mounted LED 10 watts bulk head fitting, 230 volts with intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangement provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including taking down old unsv fitting complete all as specified and as directed. Make :- Cat part No Jaquar LBLK02X010XC OR EQUIVALENT IN HELONIX, PHILLIPS

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) →, ISI marked including removal of old unsv fan and handed over to store yard of AGE E/M (North) complete all as specified and directed. Note : a) Quoted Rate is deemed to inclusive of Stickering/Marking/writing of MES numbers in bottom of ceiling Fan as directed by Engr-in-Charge. Make:- USHA, Heleous,Bajaj, Orient Electric I-Tome, Atomberg Effico Plus.

Supply and fix for wall mounted fan of size 400 mm sweep BEE. Five star rated ISI marked and connecting up including provision of cable from ceiling rose or connector to fan complete all as including removal of old unsv fan and handed over to store yard of AGE E/M (North) complete all as specified and directed. Note : a) Quoted Rate is deemed to inclusive of Stickering/Marking/writing of MES numbers in bottom of ceiling Fan as directed by Engr-in-Charge. Make:- Bajaj MIDEA BW 2200, USHA Pentacool, Havells V3.

Excavation in trenches not exc 1.50 Metre wide and not exc 1.50 Metre depth for laying of UG Cable/Pole/Stays etc getting out in Soft/Loose Soil, complete all as specified and as directed.

Returning, Filling in including Spreading, Leveling, Watering and Well Ramming in layers not exc. 25 Cm thick in Soils, complete all as specified and as directed.

Removing Surplus soil to a distance not exc 50.00 Metre away and depositing where directed at a level not exc 1.50 Metre above the Starting Point, complete all as specified and as directed.

Supply and laying 40mm outer dia, double walled corrugated (DWC) HDPE duct pipe conforming to IS- 14930 Pt-II with antirodent and non flame propogating properties plete with fittings for cable protection complete all as specified and as directed.

Supply, lay, joint, test and commissioning of LT under ground cable 1100 volt grade , XLPE insulated and PVC sheathed heavy duty armoured with aluminium conductor , IS 7098-I Marked, Laid in trenches/ducts/fixed on poles/walls/laid under roads/paths/drains/culverts or encased in GI pipe including cable glands, lugs jointing material etc complete including taking down old unsv cable all as specified and directed. cable of the following size.

(a) 10 Sq mm 2 Core

(b) 16 Sq mm 4 Core

Supply and Fix in replacement for FRLSH single core cable PVC insulated and unsheathed multistranded copper conductor of following size as per IS 694 from point wiring including removal old existing unserviceable one complete all as specified and directed.Make:Anchor,Havells,Finolex

(a) 1.5 Sq mm

(b) 2.5 Sq mm

(c) 4.0 Sq mm

(d) 6.0 Sq mm

Taking down existing cable electrical /fiber/telephone of any type and any description/ size from wall/ roof/floor and refixing the same within PVC conduit pipe/PVC corrogated pipe(20/25/50mm) /casing capping (20/25/50mm) of suitable size and making good to the disturbed surfaces to match the existing complete all as specified and directed at site. Note : - Rates of PVC conduit pipe/ casing capping will be measured and paid separately under relavant iterms.

Material and labour for attending emergent complaints i.e no light, earth leakage, short circuit, neutral break mains/ sub mains/ internal circuits of existing system of main building/ block, making continious electric supply including carrying out minor repairs etc as required to make the system in order/ functional including replacing fuse wire, copper cable, copper thimbles, glands, earthing wire complete all as specified and as directed. Note :- (i) Rate of fuse wire, copper cable, copper thimbles, glands, earthing wire are deemed to be included in the quoted rate.

Material and labour Attending the complaints of non functional of ceilling/exhaust/wall fan of any sweep and testing and repairing the ceilling/exhaust fan without taking down by replacing of fan Capcitor, fan regulator and connection wire etc. and making fan serviceable including checking the strengh of Clamp, down rod and provision of check nuts and split pin all as directed. (Note :- Item such as fan condenser, fan regulator, 1.5 sqmm, 3 core copper flexible cable shall be measured and paid seperataly as 'Supply Only'.)

Supply only following items:-

(a) Supply only Fan Capcitor, 2.5 Mfd, 240 volts for ceiling fan including PVC clamp

(b) Supply only Fan Capcitor, 4 Mfd, 240 volts for ceiling fan including PVC clamp

(c) Supply only Exhaust fan capacitor 0.85/1.0 Mfd, 230 Volts incl PVC clamps as per sample complete all as specified and as directed.

(d) Supply only Wall fan capacitor 1.5 Mfd, 230 Volts incl PVC clamps as per sample complete all as specified and as directed.

(e) Supply only Copper conductor FRLS cable, 1.5 Sqmm, 3 core, 1100 Volt grade

Taking down ceiling fan of any size/ sweep after disconnecting the wire from existing ceiling rose for repair/ replacing the unsv bearing, gun metal bush or for rewinding and refixing the same after rewinding, cleaning dust, oiling greasing, servicing, and rubber reel with clamp and nut-bolts, washers, lock pin etc as existing including connecting flexible 3 core cable from ceiling rose to connector of fan, cleaning all dust etc all as directed spcified by Engineer-in-charge (Note- Ball bearing, gun metal bush, rubber reel with clamp, nut-bolts, blade assy, outer body, canopy, rotor, stator etc shall be measured and paid separetaly as 'Supply Only' and rewinding item paid seperately under relevant item)

(a) Supply only for brass GM bush suitable for fan any size complete all as specified and as directed

(b) Supply only for Fan clamp with rubber reel insulator/bush, nut, check nut with bolt , washer and lock pin complete all as specified and as directed.

(c ) Supply only Ball bearing No 6201/6202/6203 suitable for ceiling fans complete all as specified and as directed.Make:SKF/NBC/Tata

(d) Supply only Armature (Rotor) unit with shaft suitable for ceiling Fan 1200 mm sweep of make suitable to existing as per sample. The rotor shall be made up of a wire coil enveloped around an iron core. The magnetic component of the rotor shall be made from steel laminations to aid stamping conductor slots to specific shapes and sizes. This rotor should operate at a speed 1500 rpm (revolutions per minute) and 40% of its rated torque without excitation

(e ) Supply only Field winding (Stator) of ceiling fan 1200 mm sweep complete of make suitable to existing as per sample with starting and running coil and connectors. The core of the stator is made of steel frame enclosing a hollow cylindrical core bounded up of laminations of silicon steel and copper wounded. The stator should be electromagnet and suitable to energizes the field windings.

(f) Supply only Outer body of ceiling Fan 1200mm sweep of make suitable to existing as per sample complete top and bottom with nut & bolt. The material of body shall be made of Aluminium alloy heavy duty suitable for accommodate the stator and rotor of above item of 3(b) and (c )

(g) Supply only Ceiling Fan canopy white in colour PVC suitable for ceiling Fan 1200/1400 mm sweep of make suitable to existing as per sample complete top and bottom all as directed

M & L for rewinding of ceiling fan of any size with supper enameled copper wire of existing gauge including varnishing using nomex paper and drying complete reassembling & testing complete of size 1200 mm sweep complete all as specified and as directed.

M & L for rewinding of ceiling fan of any size with supper enameled copper wire of existing gauge including varnishing using nomex paper and drying complete reassembling & testing complete of size 1400 mm sweep complete all as specified and as directed.

S & F in repairs for ceiling fan down rods of 15 mm dia GI pipe medium grade to the existing trusses of any height including necessary welding & fixing with clamps and nut bolts etc complete all as specified and as directed.

Taking down storage geyser of 25/ 50 litre capacity after disconnecting electrical connection from existing socket, removing the bolts and nuts from wall and disconnected inlet and outlet water connection for repair/ replacing the unsv items and assemble the same after making serviceable, cleaning dust including connecting flexible 3 core cable as required, painting the geyser complete, cleaning all dust, with proper filling of glass wool as heat resistance material, suitable quantity etc and refixing the geyser at it's original location complete all as directed spcified by Engineer-in-charge (Note- Spare parts of geyser shall be measured and paid separetaly as 'Supply Only' under relevant item)

Supply only following items:-

(a) Supply only Heating element long length suitable for cylidrical type geysers as per sample including rubber washers (ISI marked) of any type suitable to existing gyser of capacity 1500 watts .

(b) Supply only Heating element long length suitable for cylidrical type geysers as per sample including rubber washers (ISI marked) of any type suitable to existing gyser of capacity 2000 watts capacity

(c) Supply only Thermostat ISI marked analog type suitable for the Geysers 25 ltrs/ 50 ltrs capacity, 20 Amps, 240 Volts AC, adjustable type, 210 mm/ 300 mm long or nearest size as per sample

(d) Supply only PVC connections pipe heavy duty with brass hexagonal adapters both side suitable for 15mm dia pipe 65cm long for hot/ cold water chromium plated as per requirement.

(f) Supply only Non-return valve 15mm dia of brass ISI marked as per requirement.

(f) Supply only Non-return valve20mm dia of brass ISI marked as per requirement.

(g) Supply only Indicators of Geysers red/green of any capacity/type as per site requirement.

(h) Supply only Cable PVC insulated 3 core 2.5 Sqmm with stranded copper conductor 1100 Volts grade from socket/switch to geyser as per requirement.

(j) Supply only 3 pin plug top, 16 amp capacity, 240 Volts AC, heavy duty, ISI marked

(k) Supply only Safety valve plug made out brass metal with fusible lead, inner thread type suitable for geyser of any type/capacity .

(l) Supply only metal outer body complete of stoage water heater 25 Ltr capacity any type (Vertical/Horizotal) make suitable to existing including reinforced PUF insulation with required dense as specified and as required to hold the temperature of hot water all as directed. Note : The quoted rate is deemed to inclusive taking out the geyser and refixing including transportation.

(m) Supply only High pressure resistance inner body and Special enamel-coated copper inner tank complete of stoage water heater 25 Ltr capacity any type (Vertical/Horizotal) make suitable to existing including PUF insulation all as specified

(n ) Supply only housing assembly of storage water heater 25 ltr cacacity suitable for installing heating Element and thermostat (verticle and horizantal type) as required as specified

(o) Supply only Copper sheathed heating elements short length for latest type geysers provides faster heating and lower energy consumption of 2KW capacity suitable for verticle and horizantal type as per sample as directed

( p) Supply only thermostat for the range of 25 to 90 degree celcius suitable for 25/50 ltr storage type water heater all as specified

(q) Supply only metal outer body complete of stoage water heater 50 Ltr capacity any type (Vertical/Horizotal) make suitable to existing including reinforced PUF insulation with required dense as specified and as required to hold the temperature of hot water all as directed. Note : The quoted rate is deemed to inclusive taking out the geyser and refixing including transportation.

(r) Supply only High pressure resistance inner body and Special enamel-coated copper inner tank complete of stoage water heater 50 Ltr capacity any type (Vertical/Horizotal) make suitable to existing including PUF insulation all as specified

(s ) Supply only housing assembly of storage water heater 50 ltr cacacity suitable for installing heating Element and thermostat (verticle and horizantal type) as required as specified

M & L for painting the stoage water heater 25 Ltr capacity any type (Vertical/Horizotal) with one coat of white colour synthetic enamel paint by spraying and filling cavaties with filler, after cleaning all dust etc including writing MES/ Sl No. all as specified and directed by Engineer-in-charge.

M & L for painting the stoage water heater 50 Ltr capacity any type (Vertical/Horizotal) with one coat of white colour synthetic enamel paint by spraying and filling cavaties with filler, after cleaning all dust etc including writing MES/ Sl No. all as specified and directed by Engineer-in-charge.

Earthing complete with galvanized steel earth plate electrode of size 60cm X 60 cm X 6 mm buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5 m below the normal ground level connected to GI earth strip 32 X 6 mm dia GI earth lead as earth lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel, protected by GI pipe light grade 40mm bore all as shown on electrical plate No 3 of SSR Part-I connected to earth test point electrode, PCC pit with RCC cover, funnel with wire mesh, watering pipe 20mm dia protection pipe etc and testing on completion complete including removal of old unsv earthing material all as specified and directed. Note No 1 :- The unit rate shall also include for earth work in hard/dense soil, PCC (1:3:6) type C1 chamber, RCC 1:2:4 type B-1 cover 50 mm thick reinforced with 8 mm dia TMT bar @ 150 mm c/c both ways, funnel with watering pipe 20 mm dia medium grade, GI protection pipe light grade 40 mm dia and wire mesh complete. Note No 2 :- Earthing strip and GI protection pipe beyond 7.5 m will be measured and paid separately if required

S&F galvanised iron strip 32 x 6mm as earth continuity conductor, beyond earth test point or as ring conductor, fixed to wall on GI saddles or burried in ground or drawn in pipe or any other situation complete all as specified and as directed.

Supply and fix in replacement for Twin core flexible cable PVC insulated and unsheathed multistranded copper conductor of following size including removal old existing unserviceable one complete all as specified and directed.

(a) 1.5 Sq mm

(b) 2.5 Sq mm

M& L for Plastic trunk ISI marked of size 150x50 mm with flexible cover of 130 mm width, internal angles (adj from 80 degree), external angles (adj from 60 degree), joints for 130 mm width cover, base joint and end cap complete including all fixing arrangement all as specified and as directed by Engr-In-Charge.

M& L for Plastic trunk ISI marked of size 100x100 mm with flexible cover of 130 mm width, internal angles (adj from 80 degree), external angles (adj from 60 degree), joints for 130 mm width cover, base joint and end cap complete including all fixing arrangement all as specified and as directed by Engr-In-Charge.

M & L Cement Concrete 1:3:6 (20 mm graded aggregate) as in coping of pole etc including form work & finishing the surfaces even & smooth with out using extra cement complete including demolition of old PCC work all as specified

Supply and fix in repairs linear batten type T8 LED rod in existing batten housings having one side only electrical connection with aluminium housing,integrated drivers and polycarbonate diffuser operating voltage 230 volts 20watt in cold /warm white colour Make:Bajaj Cat No. BLRB 20 CW LED S,Philips Master InstantFit,Osram

M&L for Spray Painting of Meter Panel Board from five side made of MS Sheet (Approx size 1.20m x 0.8m x 0.4m ) Rectangle type of electric supply with two coat of synthetic enamel paint colour coat including preparation of old painted surface of MS sheet as approved colour by Engineer -In-Charge all as specified and as directed.

Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

RELIABLE ENTERPRISES

Suchit constructions

Chaulya Enterprises

PURVA ELECTRICALS AND ENGINEERS

metro electrical services

K D Electricals