SPECIAL REPAIRS TO BLDG NO.T-14 (TOILET BLOCK) AT OR LINE A VEH PLATOON UNDER AGE (I) POKARAN

Amount

M&L for laying of APP based polymeric membrane minimum weight 3Kg/Sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150gm/sqm) laid on primed surface by torched application complete etc all as per manufacturer instructions and sealing all the over laps of 75mm in length side and 100mm on the width side of membrane all as specified and directed including following (i) Taking down the existing roof treatment of any description , any thickness and removing the debris not exceeding 1000 m. (ii) Preparing the surface of roof slab by brushing with wire brushes for removing of loose/ dirt material etc and sweeping with brooms or gunny bags or mechnical devices. (iii) Applying neat cement slurry with 3Kg of cement per sqm & mixing of liquid water proofing compound as per manufacturer instruction on surface of roof slab (iv) Screed bed 10mm thick in CM (1:4) on concrete surfaces with mixing of liquid waterproofing compound as per manufacturer’s instructions and finishing the surface even and smooth without using extra cement (v) Priming the suraface of concrete/plaster with bituminous primerconfirming to IS-3384 applied at 0.3 liter per Sqm (vi) Applying 2 coat of Al paint @ 100 ml/sqm (vii) M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate for levelling course for consolidated thickness shall be varied from 25 to 55 mm as per the requirements

Supply only integral Waterproofing compound.

Dismantling of Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for coloured Glazed ceramic tiles in vertical surfaces 450 x300x7 mm thick on vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm backing coat in CM1:3 including complete all as specified and directed.

S&F for Non- skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with screed bed 15 mm thick CM 1:6 complete all as specified & directed

Demolition of stone/ boulder masonry and built in cement mortar all as specified & directed by Engineer-in-charge.

M&L for squared rubble walling, Jodhpur type, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar (1:6) all as specified & directed by Engineer-in-charge.

Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exceeding 20mm & dressing face beds and joints as specified to squared rubble walling Jodhpur type brought up to courses all as specified & directed by Engineer-in-Charge.

Taking down cement plaster on brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

M&L rendering 15mm thick in 1:6 cement plaster on stone masonary surface is to be finished even and smooth (without using extra cement) complete all as specified and directed.

M&L rendering 15mm thick in 1:4 cement plaster on of stone masonary surface is to be finished even and smooth (without using extra cement) complete all as specified and directed.

M&L rendering 10mm thick in 1:3 cement plaster on ceiling of stone surface is to be finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for preparation new plastered surfaces as in ceiling, applying 3 coats of white wash complete.

M&L for preparation new plastered wall surfaces and applying 3 coats of white wash complete.

M&L Finishing wall with Acrylic emulsion smooth exterior paint of reqd shade, new work (two or more coat) applied @ 1.67 Ltr/10 Sqm over and incl priming coat of exterior primer applied @ 2.20 Kg/10 Sqm complete all as specified & directed.

Taking down Chowkats or frames with shutters (with out taking off shutters from the frames) area n exc. 1.50 Sqm each complete all as specified & directed.

S&F, Powder coated, anodised aluminium frame & shutter for door, window and ventilator including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, etc complete all as specified & directed by Engineer-in-charge.

S&F, Powder coated, anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified & directed by Engineer-in-charge.

M&L for sheet glass 4.0mm thick, ordinary quality and glazing with, rubber packing n exc 0.5 sq m in each pane complete all as specified and as directed by the Engineer-in-Charge

S&F stainless steel wire cloths 0.36mm nominal dia of wire and averaging width of aperature 1.40mm and fixed with stainless steel wire staples complete all as specified & directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified & directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suplying & fixing in the frame at site as per directed by Engr - in- charge.

S&F 100mm long Butt hinges, medium weight, cold rolled mild steel and fixed complete all as specified & directed.

S&F Aluminium anodised, barrel tower bolt of extruded section and fix of 150mm long complete all as specified & directed.

S&F Aluminium handles, cast type, anodised of size 150mm long complete all as specified & directed.

S&F for vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified & directed.

S&F PVC flushing cistarn 10 ltrs capacity ISI marked incl PVC damtake pipe PVC 450mm inlet etc complete all as specified & directed.

S&F PVC connections 15 mm size with PTMT nuts to length 600 mm complete all as specified & directed.

S& F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified & directed.

S&F towel rail 600 mm long of Brass C.P 'D' type fixed with and including chromium plated brass screws and wooden /plastic cheats complete all as specified & directed.

S&F CP Shower rose 125mm size with swivel joint including fixing sted pipe for union complete all as specified & directed.

S&F GI tubing (ISI) marked) medium grade with all fitting and fixed complete to wall ceiling or laid in floors including Taking up or down steel tubing and connections of 15 mm diameter complete all as specified & directed.

S&F 20 mm dia medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors steel tubing and connections, including taking up or down steel tubing complete all as specified and directed.

S&F gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed in repairs to 15 mm bore pipe complete all as specified & directed.

S&F gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed to 20 mm bore pipe complete all as specified & directed.

S&F stop cock copper alloy but fancy type and chrominum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron/pipe or for union and fixed 15 mm bore in repairs complete all as specified & directed.

S&F bib taps cast cipper alloy chromoum plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repairs complete all as specified & directed.

S & F 1000 litres capacity Three Layers White colour Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including taking down old PVC tank complete all as specified & directed.

PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia out let complete all as specified & directed.

PVC (SWR) multi floor trap with grating including jointing with solvent cement 100 mm dia out let. complete all as specified & directed.

S&F PVC (SWR) pipes of 110 mm dia, single socketed fixed to walls complete all as specified & directed.

S&F PVC (SWR) pipes of 75 mm dia, single socket fixed to walls complete all as specified & directed.

S&F PVC (SWR) bends with access door of 110 mm dia, any radius complete all as specified & directed.

S&F PVC(SWR) bends with access door of 75 mm dia, any radius complete all as specified & directed.

S&F PVC (SWR) bends of 110 mm dia, any radius complete all as specified & directed.

S&F PVC (SWR) bends of 75mm dia, any radius complete all as specified & directed.

Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe Fe 290 Gde E-165 complete all as specified & directed.

Preparing new steel surfaces of any description exceeding 10 cm in width or girth and applying two coats of synthetic enamel painting over over a coat of pink primer complete all as specified and directed.

Demolition of PCC in Ground Floor and paving n exc 15 cm (below or above ground level) complete all as specified & directed.

M&L for cement concrete type D2,1:4:8 (using 40 mm graded stone aggregate) of thickness 75 mm as in sub base complete all as specified and directed by Engr-in-Charge.

M&L for 80 mm thick machine pressed precast concrete interlocking paver block with grey cement and pigments any shape and size conforming to IS 15658-2006 of M-35 grade including even spreading of 25mm thick layer of sand cushioning incl watering & consolidation all as specified. all as specified and as directed by Engr-in-charge

M&L for 50 mm thick PCC 1:3:6 type C1 as in plinth protection incl surface finished even and smooth w.using extra cement as specified and directed by Engr in Charge..

M&L For Type B1 1:2:4 (20 mm graded aggregate) Providing, cement concrete in kerbs of mud stops, rounded or chamfered on edges complete all as specified and directed by Engr-in-Charge.

Taking down carefully existing point wiring of any description light, fan,sockets,bells etc) complete including fittings such as terminal boxes, switches, sockets, ceiling rose, lamp holders, brackets sketch fittings, pendants, fan regulartors and making good the disturbed surfaces, walls, floors etc. all as directed by EIC

Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse)

M&L point wiring complete with 1.5 Sqmm single core PVC insulated cable 1100 Volts grade multistranded copper conductor drawn through in PVC Casing and Capping on surface stone/brick, masonry walls, roofs floors etc including MS terminal boxes fabricaterd out of 1.12mm thick MS sheet sunk type / surface type and laminated top sheet of 2mm thick for housing switches sockets, regulators etc including provn of 1.5 sqmm dia copper conductor for earth wire connected to common dolly all as specified and directed by Engineer-in-Charge a) One light point / Fan point / Exhuast Fan point controlled by one 5 Amps One way switch

b) All as above item no 56 but for one 3 pin 5/6 Amps switch socket outlet on same board

S&F switch piano flush type single pole one way 5 Amps complete all as specified and directed.

S&F Switch Socket Combination outlet, multipurpose, 2 pin 5 amps/3 pin 5 amps controled by one switch 5 amps, flush type complete all as specified and directed.

S&F lamp holder insulated body with back plate suitable for battern fittings

S&F Ceiling rose surface bakelite 65 x 50 mm 2/3 terminais all as specified

S&F Sheet Modular metal enclosure DB SPN 240 Volts 4 Way single door type with 200 Amps busbar for fixing of MCBs

S&F MCB Single pole and neutral, 40A, 415 Volts AC all as specified

S&F MCB Single pole, 5-32A, 415 Volts AC all as specified

supply and fix LED Lamp Retro fit type 9 watts 230 V and all as specified by Engr-in-charge

Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge o the plate not less1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts nuts, check nuts and washers of galvanized iron of steel all as shown in electrical plate No.5 connected to earthing test point incl necessary earth work, excavation PCC 1:3:6 type CI using 20mm graded stone aggregate for earth chamber provn of PCC cover 40 mm thick 1:2:4 mm type B1 funnel with water Pipe, GI pipe, 15mm dia medium grade protection pipe, GI earth lead all as specified

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

M/s Shri Inder Construction Company

rathore construction co.

ALPHA ENGINEERING COMPANY