CERTAIN REPAIRS TO JOINERY CEILING PLUMBING TILING SUNKEN FLOORS ROOF TREATMENT PLINTH PROTECTION ETC AT ZONE G AREA UNDER AGE BR N NO II OF GE N SECUNDERABAD

Amount

Demolition of cement concrete (unreinforced) in ground floor of paving not exceeding 15 centimetres thick below or above ground level complete all as specified and as directed.

Material and labour for 75 mm thick plain cement concrete 1:3:6, type C1 using 20 mm graded stone aggregate in plinth protection laid in alternative bays finished even and smooth without using extra cement including making 10 mm wide grooves to full depth at the junction of wall and plinth protection, at 3 m interval and at every change of direction and filling the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight and top 10 mm depth to be sealed with ceiling compound grade ‘A’ complete all as specified and as directed

Material and labour for 100 mm thick plain cement concrete 1:2:4, type B1 using 20mm graded stone aggregate as in floors, paths etc laid in pannels including finishing surfaces smooth and even without using extra cement complete all as specified and directed.

Demolition of plain cement concrete of any description and in any position as in sunken floors complete all as specified and as directed

Demolition of stone slabs and tiles of any description or thickness in floors, aporns etc laid beded and pointed in any mortar complete all as specified and directed

Material and labour for 20 mm thick Granite (of any type) machine cut, jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone duly grinding and polishing laid over 20mm thick screed bed in cm 1:4 in steps, jambs, pillars, window cills, cooking platforms and like complete all as specified and as directed

Supply and fixed in repairs stainless steel sink overall size 915mmx460mm with bowl size 410mmx330mm x160mm with draining board made out of stainless steel 1 mm thick for kitchen with plugs, washers and waste pipe including cast iron cantilever brackets and connecting to union / pipe complete all as specified and as directed

Material and labour for rough dressed Shahabad stone of thickness 20mm to 30mm thick, in floors laid over 20 mm thick screed bed in cement mortar 1:6, jointed and pointed in cement mortar 1:3, complete all as specified and as directed.

Material and labour for 15 mm bore steel water tubing, ‘medium grade’ galvanised, with all fittings fixed complete to walls and ceilings or laid in floors including takingdown existing unserviceable steel tubing complete all as specified and as directed.

Material and labour for 20 mm bore steel water tubing, ‘medium grade’ galvanised, with all fittings fixed complete to walls and ceilings or laid in floors including takingdown existing unserviceable steel tubing complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) of size not exceeding 1.5 square metre each complete all as specified and as directed

Supply and fix Solid PVC door frame of size 50 x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube, all as specified and shown in Section 8 of MES Schedule Part-II 2010 complete all as specified and as directed

Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawings given in Section 8 of MES Schedule Part-II 2010 as applicable complete all as specified and as directed

Supply and fix stainless steel Butt hinges of 100 mm size, stainless steel hinge pin complete all as specified and as directed.

Supply and fix 150 mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 150 mm size extruded aluminium alloy handles, fabricated type with plate anodised finish complete all as specified and as directed.

Material and labour for application of one coat of water based bitumen emulsion primer at the rate of 0.3 litre per Square metre after cleaning of the surfaces thoroughly from dust, dirt and projections and applying water proofing treatment with polymeric membrane of weight 3 kilogram per square metre of standard type consisting of 90 micron HMHDPE torch on membrane over that a coat of blown bitumen of 85 / 25 at the rate of 1.2 kilogram per square metre over that providing a sand layer of 25mm thick thick to receivelean concrete in sunken floors complete all as specified and as directed.

Material and labour for rendering 15 mm thick on sunken surfaces in cement mortar 1:3 duly mixing with water proofing compound at the rate of 3% by weight of cement and finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound will be measured and paid separately under relevant items in this schedule

Material and labour for plain cement concrete 1:7:12, type F2 by using 40 mm graded stone aggregate as in filling and mass concrete in sunken floor complete all as specified and as directed.

Material and labour for average 25 mm thick plain cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate make to slope in sunken floors complete all as specified and as directed.

Supply & fix in repairs 32 mm dia GI pipe medium grade in short lengths for spouts including cutting holes in walls and making good with concrete surfaces built in cement mortar 1:3 and finished even and smooth complete all as specified and as directed

Dismantling floor hearth, or wall tiling inluding cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. .

Material and labour for Non skid coloured joint free ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 square metre but not exceeding 0.18 square metre in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Material and labour for Non skid coloured joint free ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 square metre but not exceeding 0.18 square metre in skirting/dado set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles laid over and including 10 mm thick rendering in CM 1:4 as in backing coat of tiles complete all as specified and as directed.

Material and labour for brick work with fly ash bricks, straight or curved on plan exceeding 6.0 metre mean radius built in cement mortar 1:6 as in walls including demolition of brick work built in cement mortar complete all as specified and as directed

Taking down cement plaster of any description from brick/stone walls or concrete surface including raking out joints, hacking for key, scrubbing down with water anddisposal of rubbish, cleaning off the premises etc complete all as specified and as directed

Material and labour for rendering 15 mm thick on brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and as directed

Material and labour for rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:6 finished fair and even without using extra cement complete all as specified and as directed.

Material and labour for rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished fair and even without using extra cement complete all as specified and as directed.

Material and labour for rendering 5mm thick on ceiling surfaces in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour 40mm thick plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in floor finishes and finished even and smooth using extra cement complete all as specified and as directed.

Material and labour for applying three coats of white wash on walls including preparation of newly plastered surfaces complete all as specified and as directed.

Material and labour for applying two coats of colour wash over a coat of white wash on walls including preparation of newly plastered surfaces complete all as specified and as directed

Material and labour for applying three coats of white wash on ceiling surfaces including preparing the new surfaces complete all as specified and as directed.

Supply and fix for high density polyethylene pipes (HDPE) 40 mm dia of pressure rating 6 kilogram per square centimetre fixed to walls, ceilings or laid in floors in any length complete all as specified and as directed.

Material and labour for Non skid coloured ceramic tiles approved colour (Square/ rectangular) area of each tile exceeding 0.06 square metre but not exceeding 0.11 square metre of 7 to 8mm thick set and jointed in neat cement slurry and pointing in coloured cement to match the coloured tiles in floors laid over including provisioning of 15mm screedbed in cement mortar 1:6 complete all as specified and as directed

Material and labour for glazed coloured ceramic tiles size 300 x 200 x 7 mm suitable to non skid ceramic tiles mentioned herein before 7 to 8mm thick on vertical surfaces as in dado/ skirting set and jointed in neat cement slurry and pointed with coloured cement to match laid over including provisioning of 10 mm thick cement plaster in cement mortor 1:4 as a backing coat to receive tiles complete all as specified and as directed

Taking out existing unserviceable water closet Squatting Pan of any size and Supply and fix vitreous china, white, squatting pan of ORISSA pattern of size 580mm x 440mm including integral foot rests, flushing pipe, anti syphonage pipe (excluding flushing cistern and flush pipe) and provision of concrete bedding in plain cement concrete 1:3:6 type C2 using 12.5 mm aggregate including making good the disturbed floor surfaces to match with the adjoining surfaces complete all as specified and as directed

Taking out existing unserviceable water closet of pedestal pattern of any size and supply & fix vitreous china wash down water closet pan (Pedestal Pattern) white including fixing bolts, complete and including making good to floor to match with adjoining surfaces complete all as specified and as directed

Taking out existing wash hand basin of any size and vitreous china wash basin, white colour, flat back of size 550 X 400 mm including 32mm dia waste pipe, waste coupling 32 mm dia, CI brackets etc complete all as specified and as directed.

Supply and fixed in repairs 20 mm bore gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. Make: ZOLOTO/LEADER

Supply and fixed in repairs 300 mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Supply and fixed in repairs 15 mm bore swivel shower of PTMT any colour minimum weight 40 grams complete all as specified and as directed.

Supply and fixed in repairs 40 mm dia waste coupling of PTMT (Half or Full thread) of minimum weight 45 grams complete all as specified and as directed.

Supply and fixed in repairs 15 mm dia bib tap of standard PTMT of any colour screwed for iron pipe minimum weight 90 grams complete all as specified and as directed.

Supply and fixed in repairs 15 mm dia pillars taps of PTMT of any colour screwed for iron pipe of minimum weight 110 grams complete all as specified and as directed.

Supply and fixed in repairs 15 mm dia stop valve of PTMT of any colour screwed for iron pipe minimum weight 90 grams complete all as specified and as directed.

Supply and fixed in repairs 15mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high-density plastic ball screwed for iron pipe and fixed (minimum weight -142gms) complete all as specified and as directed

Supply and fixed in repairs 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod and high-density plastic ball screwed for iron pipe and fixed (minimum weight 210 grams) complete all as specified and as directed

Supply and fixed in repairs plastic water closet seat and cover, black or white closed pattern with flat bottom and mild steel chromium plated hinging device complete all as specified and as directed

Supply and fixed in repairs 110 mm bore PVC (SWR) bends, any radius complete all as specified and as directed

Supply and fixed in repairs 75 mm bore PVC (SWR) bends, any radius complete all as specified and as directed

Supply and fixed in repairs 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed

Supply and fix 110 mm bore PVC (SWR) fixed to wall or pipes single socketed, in any length with rubber ring joints laid in floors as in soil/waste/vent pipes including demolition of the old pipes complete all as specified and as directed

Supply and fix 75 mm bore PVC (SWR) fixed to wall or pipes single socketed, in any length with rubber ring joints laid in floors as in soil/waste/vent pipes including demolition of the old pipes complete all as specified and as directed

Supply and fix in repairs PVC (SWR) floor trap 75mm dia, plain with grating including jointing to waste pipe fixed in plain concrete cement 1:2:4 type B1 complete all as specified and as directed.

Supply and fixed in repairs PTMT towel rail 600mm long fixed with Chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed

Supply and fixed in repairs tubular towel rail of 20 mm dia, D type of brass chromium plated 60 centimetre long between flanges complete all as specified and as directed.

Supply and fixed in repairs 110 mm bore PVC (SWR) branch piece (single Y or T) equal or un-equal with access door complete all as specified and as directed

Supply and fixed in repairs 75 mm bore PVC (SWR) branch piece (single Y or T) equal or un-equal with access door complete all as specified and as directed

Supply and fixed in repairs 10 litres capacity PVC valve less low level flushing cistern with ISI marked body, ISI marked siphon with inlet, ball valve, float and handle, cast iron brackets and 32 mm dia PVC flush pipe complete all as specified and as directed.

Supply and fix in repairs 40 mm dia, 90 centimetre long PVC low density waste pipe for stainless steel sink of working pressure rating @ 4 Kilogram per Square centimetre with polyethylene union and check nuts complete all as specified and as directed.

Supply and fix in repairs 32 mm dia, 75 centimetre long PVC low density waste pipe for WHB/Urinal of working pressure rating @ 4 Kilogram per Square centimetre with polyethylene union and check nuts complete all as specified and as directed.

Supply and fixed in repairs 100 mm dia CP waste coupling for sinks of any pattern complete all as specified and as directed.

Supply and fixed in repairs 15 mm bore, 45 centimetres long PTMT connecting pipe fitted with brass unions to connect iron pipe complete all as specified and as directed.

Supply and fixed in repairs 15 mm dia bore stop valves, long shank and cup (concealed type) cast copper alloy, fancy type, screwed down high pressure, with crown head, screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fixed in repairs brass chromium plated, health faucet with health faucet flexible steel tube of 1.5 metre long and stand etc screwed for 15 mm bore iron pipe for two in one tap for WC complete all as specified and as directed.

Supply and fixed in repairs 15 mm bore brass, chromium plated, mixing valve for mixing hot and cold water, screwed down, screwed for iron pipe complete all as specified and as directed.

Supply and fixed in repairs 15 mm bore stop valve, cast copper alloy, with crutch or butterfly handle, screwed down, high pressure and screwed both ends for or for unions complete all as specified and as directed.

Supply and fixed in repairs 15 mm bore stop valves, cast copper alloy, chromium plated, fancy type, high pressure, with capstan head, screwed down, screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fixed in repairs 15 mm bore pillar taps cast copper alloy, with capstan heads chromium plated, fancy type, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.

Supply and fixed in repairs 15 mm bore bib taps, cast copper alloy, fancy type, chromium plated with capstan head, screwed down, and screwed for iron pipe complete all as specified and as directed.

Supply and fixed in repairs 15 mm bore bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, and screwed for iron pipe complete all as specified and as directed.

Supply and fixed in repairs 15 mm bore brass, chromium plated, angle cock, screwed for iron pipe complete all as specified and as directed.

Supply and fixed in repairs 125 mm dia brass chromium plated shower rose with swivel joints complete all as specified and as directed.

Supply and fix 500 litres capacity rotational moulded polyethylene water storage tank of triple layer type(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I along with 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe including dismantling of existing tank of any description complete all as specified and as directed

Supply and fix 1000 litres capacity rotational moulded polyethylene water storage tank of triple layer type(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I along with 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe including dismantling of existing tank of any description complete all as specified and as directed

Supply and fix 2000 litres capacity rotational moulded polyethylene water storage tank of triple layer type(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I along with 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe including dismantling of existing tank of any description complete all as specified and as directed

Demolition of cement concrete of any description and in any position not otherwise specifically provided as in roof padding concrete including any type of treatment complete all as specified and as directed.

Material and labour for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and as directed.

Material and labour for 40 mm thick plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate as in padding concrete on roof tops and finishing even and fair complete all as specified and as directed.

Material and labour for roughening the old concrete roof surfaces by picking, sweeping, cleaning and washing down with water to remove dust etc and applying a coat of neat cement slurry at the rate of 3 Kilo gram per square metre complete all as specified and as directed

Material and labour for rendering 10mm thick on brick work or concrete surfaces in cement mortar 1:4 duly mixing with water proofing compound at the rate of 3% by weight of cement and finished even and smooth surface complete all as specified and as directed. NOTE:- Water proofing compound will be measured and paid separately.

Material and labour for sweeping with wire brushes and cleaning with water over the roof surfaces and application of one coat of water based bitumen emulsion primer at the rate of 0.3 kilogram per square metre after cleaning of the surfaces thoroughly from dust, dirt and projections and applying water proofing treatment with APP based polymeric membrane of weight 3.5 Kilogram per square metre and minimum 3 mm thick reinforced with polyester non woven fabric (weight not less than 150 grams per square metre) as per IS 3384 on primed surface by forced application over roof surfaces over that a coat of blown bitumen of 85 / 25 at the rate of 1.2 kilogram per square metre over that coat of bituminous aluminium paint at the rate of 100 grams per square metre complete all as specified and as directed.

Supply only integral water proofing compound of ISI marked complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) of size exceeding 1.5 square metre but not exceeding 4 square metre each complete all as specified and as directed

Taking down shutters of any description area not exceeding 1 square metre each complete all as specified and as directed

Taking down shutters of any description area exceeding 1 square metre but not exceeding 2 square metres each complete all as specified and as directed

Taking down shutters of any description area exceeding 2 square metre each complete all as specified and as directed

Dismantling of wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed

Material and labour for mild steel framed work as in doors and chowkats or gates, ladder etc of angle or other section with gusset plates, rails, braces, MS sheet etc, complete, drilled for fixing of steel sheeting are other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging fittings and conforming to Fe 410-W (Gde E-250) quality ‘A’ complete all as specified and as directed

Supply and fix mild steel sheeting 0.80 mm thick plain, black sheet for covering to door shutters and similar works cut to size, edges beaded if directed holes punched, including riverting or welded to steel members etc with plain 40 mm lap joints with riveted or welded seams, including bending or turning 'U' mitred angles stoped ends, out lets etc as required complete all as specified and as directed

Supply and fixed in repairs mild steel sheeting 0.80 mm thick plain, black sheet for covering to door shutters and similar works cut to size, edges beaded if directed holes punched, including rivering or welded to steel members etc with plain 40 mm lap joints with riveted or welded seams, including bending or turning 'U' mitred angles stoped ends,out lets etc as required complete all as specified and as directed

Supply and fix mild steel framed work such as grills, framed guard bars ,gratings and similar work conforming to Fe 290 grade E- 165 with ends of bars shouldered and / or riveted, forged into spikes or welded complete all as specified and as directed

Supply and fix steel windows with double leaf (glazed shutter to open outside and wire mesh shutter inside opening) side hung shutters for mosquito proof and glazed shutters with projecting type hinges, steel handles, steel peg stay, tower bolts and glazing bars, dovetailed or welded including a shop coat primer complete all as specified and as directed.

Supply and fix steel ventilator with partly fixed and partly top hung shutter including hinges, steel peg stay complete all as specified and as directed

Material and labour for welding in repairs not exceeding 2.5 centimetres in length and thickness of metal to be welded not exceeding 6 mm thick complete all as specified and as directed.

Material and labour for preparing the new steel surfaces of any description over 10 centimetre width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed

Hacking out old unserviceable glass / broken glass panes of any description, from old wooden or metal frames, or stone, concrete or brick surrounds any thickness or size glazed with putty or fixed with beads complete all as specified and as directed.

Supply and fix 3 mm thick sheet glass, ordinary quality and glazing with oil putty and glazing clips in metal frame or second class hard wood beading to wooden frames in squares not exceeding 0.5 square metre each pane complete all as specified and as directed

Supply and fix 3 mm thick figured glass, pin head type and glazing with oil putty and glazing clips in metal frame not exceeding 0.5 square metre in each pane complete all as specified and as directed

Supply and fix galvanised mild steel wire cloth of 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed

Supply and fixed in repairs mild steel wire cloth of 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed

Supply and fix second class hard wood plain, solid straight chowkats or frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue and pinned at joints including treating the back of chowkats with coal tar black paint complete all as specified and as directed

Supply and fix 165 x 60mm pressed steel frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc with one coat of primer complete all as specified and as directed

Supply and fix 105 x 60mm pressed steel frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc with one coat of primer complete all as specified and as directed

Material and labour Plain cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in coping, bed plates, filling back of hallow portion of MS door frames etc complete all as specified and as directed

Supply and fix 35 mm thick second class hardwood, factory made, plain framed panelled shutters (two panels) with lock rail and panel of 9 mm thick BWP commercial ply. The size of rail and stile as per IS 1003 (Part I) kiln seasoned and chemically pressure treated complete all as specified and as directed

Supply and fix 35 mm thick second class hardwood glazed / gauzed and skeleton shutter open rebated and prepared to receive glass, gauze etc with sash bars edges of framing plain chamfered or rounded fitted with cut & mitred beads for securing glass etc, size of members of shutters as specified in SSR Part I Section 8, clause 8.20(a) and fixed to chowkats complete all as specified and as directed.

Supply and fix 30mm thick second class hardwood glazed / gauzed and skeleton shutter open rebated and prepared to receive glass, gauze etc with sash bars edges of framing plain chamfered or rounded fitted with cut & mitred beads for securing glass etc, size of members of shutters as specified in SSR Part I Section 8, clause 8.20(a) and fixed to chowkats complete all as specified and as directed.

Supply and fix 30 mm thick factory made flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and as directed

Material and labour for preparing the new wooden surfaces of any description over 10 centimetre width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Supply and fix 300 mm long, mild steel sliding door bolt, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed

Supply and fix 200 mm long mild steel barrel tower bolts stove enamelled black, with bright bolt complete all as specified and as directed. Make: Crown/Swastik

Supply and fix butt hinges 100 mm size, medium weight, cold rolled, mild steel complete all as specified and as directed Make: Crown/Swastik

Supply and fix butt hinges 75 mm size, medium weight, cold rolled, mild steel complete all as specified and as directed Make: Crown/Swastik

Supply and fix 150 mm long mild steel pressed handle oval type stove enamelled black, complete all as specified and as directed.

Supply and fix 100 mm long mild steel pressed handle oval type stove enamelled black complete all as specified and as directed. Make: Crown/Swastik

Supply and fix 300 mm long mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. Make: Crown/ Swastik

Supply and fix 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed

Supply and fix 200 mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix in repairs mild steel powder coated curtain rod 19 mm dia with brackets, stops, rollers etc standard thickness of any length complete all as specified and as directed

Dismantling of old false ceiling along with ceiling boards (fibre pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets all as specified

Supply and fix anodised aluminium snap grid frame work of 605 mm x 605 mm false ceiling fixed to walls duly hanged from ceilings including adjustable supporting GI hangers of 6 mm dia fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and dash hold fasteners of 12.5 mm dia 40 mm long complete all as specified and as directed

Material and labour for 4mm thick non Asbestos fibre cement building boards fixed on aluminium snap grid frame work with clips or screws in false ceiling including preparation of surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.

Supply and fix perforated particle board for insulation and accoustic purpose 60 x 60 centimetre of 12 mm thick size fixed with staples on existing snap grid complete all as specified and as directed

Dismantling of asbestos cement sheet (corrugated or semi corrugated) in roof covering including ridge sheet from any height complete all as specified and as directed.

Material and labour for 6 mm thick asbestos cement corrugated or semi corrugated sheets in roofs fixed with ‘L’ type or ‘J’ type or cranked hook bolts including necessary laps all as specified in SSR part I complete all as specified and as directed

Fixing only asbestos cement corrugated or semi corrugated in roofs fixed with ‘L’ type or ‘J’ type or cranked hook bolts including necessary laps all as specified in SSR part I complete all as specified and as directed. Note: Old sheet obtained from dismantling shall be re used.

Material and labour for 6 mm thick asbestos cement two-piece adjustable serrated ridge sheet suitable for corrugated or semi corrugated sheets in roofs fixed with ‘L’ type or ‘J’ type or cranked hook bolts complete all as specified and as directed

Supply and fix pre-painted galvalume aluminium zinc coating galvanised based corrugated steel sheet of 0.50 mm thick of approved colour having tensile strength of 550 Mpa as roof covering/cladding to wall fixed with self tapping (SD) screws including dismantling plain or corrugated steel sheets complete all as specified and as directed

Supply and fix pre-painted galvalume aluminium zinc coating galvanised based plain steel sheet of 0.50 mm thick of approved colour having tensile strength of 550 Mpa as ridge, gutters fixed with self tapping (SD) screws including dismantling plain steel sheets complete all as specified and as directed

Supply and fix steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS-1161-1998 grade st-240 complete all as specified and as directed

Dismantling of single layer Mangalore pattern or similar tiles in roofing etc including ridge tiles complete all as specified and as directed. Note :- Dismantling will have to be carried out in patches of area as ordered by Engr-in-charge

Dismantling wooden battens for tiles, of any size spaced exceeding 15 centimetre, including tilting fillets complete all as specified and as directed.

Material and labour for Mangalore pattern roof tiles, interlocking at side joints, laid dry complete all as specified and as directed.

All as per item No 137 above but except tiles Note: Serviceable tiles obtained from dismantling shall be re used

Material and labour for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded & jointed in cement mortar 1:6 complete all as specified and as directed.

All as per item No 139 above but except Ridge tiles

Material and labour 2nd class hard wood clean sawn battens for tiles at roof of sectional area exceeding. 5 Square centimetre and not exceeding15 Square centimetre spaced at 30 centimetres centre to centre complete all as specified and as directed

Fixing only 2nd class hard wood clean sawn battens for tiles at roof of any sectional area spaced at 30 centimetres centre to centre complete all as specified and as directed. Note: Serviceable battens of any size obtained from dismantling shall be reused.

Material and labour for 2 coats of cresoting to tile battens of any size and spacing prepared and treated all over (Measured over all as one side only, spaces not deducted) complete all as specified and as directed

Supply and fix 2nd class hard wood plain fillets square, rectangular or triangular in section, clean sawn , secured with nails or brads, sections area exceeding 13 Square centimetres and not exceeding 25 Square centimetres fixed with screws including two coats of synthetic enamel paint over a coat of pink primer with preparation of new surfaces complete all as specified and as directed

Supply and fixed in repairs18/19 mm thick pre laminated particle board interior grade pre laminated on one side other side balancing white lamination fixed with screws to timber frame work complete all as specified and as directed.

Supply and fix mild steel butt hinges of 50 mm size, medium weight, cold rolled complete all as specified and as directed

M/S DIVIJA BUILDERS

NEWS CONSTRUCTIONS

SAI RAM CONSTRUCTIONS

DHANA CONSTRUCTIONS