REPAIR MAINT TO DRAIN FENCING AND MES INSTALLATION AT AF STN MEMAURA

Amount

Dismantling stone slabs or tiles or PCC tiles of any description or thickness, laid dry in floors, aprons etc complete all as specified and as directed.

S&F for machine pressed precast concrete interlocking paver block any shape and size with grey cement and no pigment confirming to IS 15658-2006 of 60mm thickness M-35 grade complete all as specified and as directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as directed.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick,laid over 15 mm thick screed bed in CM 1:6 in floor set and jointed in neat cement slurry and pointed with grey cement mixed with pigment to match the color of tile complete all as specified and directed

M&L for 75mm thick PCC 1:4:8 of type D-2 using 40mm graded stone agrregate as in sub base of floors etc complete all as specified and directed.

Demolition of cement concrete as in ground floors & pavings not exc. 15 cm thickness (below or above G.L.) complete all as directed.

Demolition of brickwork built in cement mortar complete all as specified and as directed.

M&L for Brick work with sub class B' bricks straight or curved on plan exc 6m mean radious, built in CM 1:6 complete all as specified and directed.

All as per above item No 08, but except bricks -ditto-

M&L for 15mm thick rendering on fair faces of brick/concrete surfaces in CM 1:4, including finishing the surfaces even and smooth, complete all as specified and directed.

M&L PCC type B-1,1:2:4 (20mm graded stone aggregate) as in coping, side kerbs, mud stops etc including necessary formwork complete all as specified and directed.

M&L PCC type B-1,1:2:4 (20mm graded stone aggregate) as in surface channels and drains etc complete all as specified and directed.

M&L for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and as directed.

Add or deduct for each 25mm girth or part thereof over or under 30cm -ditto-

M&L for PCC 1:4:8 type -D2 using 40 mm graded stone aggregate as in foundation filling / mass concrete, complete all as specified and directed.

Taking down cement plaster on brick walls incl. raking out joints, hacking for key, scrubbing down with water etc. complete all as directed.

M&L rendering 15mm thick in cement plaster 1:6 on surfaces fair faces of brick work and surface finished even and smooth without using extra cement

M&L for applying two coats of cement base paint including preparation of newly plastered/unplastered surface complete all as specified and directed.

Material & labour for rendering 10mm thick in cm 1:4 as in ceiling/ chajja Facia finished even & fair faces complete all as specified and directed .

M & L for preparation of old decorated plastered or un-plastered surface of walls, cornices, pilasters etc by brooming down scraping, filling all the nail holes etc and prepairing surface with plaster of paris etc and applying one coat of white wash on walls mixed with adequate qty of fevicol complete all as specified and directed.

M&L for preparation of old decorated plastered or un-plastered surface of walls, cornices, pilasters etc by washing, rubbing down and stopping old painted surfaces and applying two coat of plastic emulsion paint on on walls/ chajja/ facias/ fins coloured or white complete all as specified and directed

Dismantling timber scantling framed work in filletes, rails, posts, rafters, purlins etc under 40 sqcm in section.

S&F for mild steel rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates of Fe 410-W (Gde-E-250) quality 'A'

S&F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 MPa as in roof covering/ cladding to wall, fixed with self tapping screws including dismantling of plain or corrugated steel sheeting any gauge/thickness in roof covering etc, complete all as specified and as directed.

M&L for 75mm thick PCC 1:4:8 of type D-2 using 40mm graded stone agrregate as in sub base of floors etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling incl. cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises

M & L galzed ceramic coloured tiles 300x200 x7mm thick, on walls etc set & jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces over &.incl 10mm thick rendering in cement mortar 1:4 for laying wall tiles etc complete all as specified and directed.

Dismantling structural steel work including doors/gates but excluding framed truss etc complete all as directed.

S&F steel rolling shutters, 1.00mm thickness of laths without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one coat of primer, erected in position as indicated, complete push pull or manual type complete all as specified and as directed.

S&F steel plates, plain or chequered, 5mm thick or over in thickness in available sizes confirming to Fe-290 (Gde E-165) complete all as directed.

M & L preparation of new steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified

M & L preparation of old steel or iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint all as specified

Taking down of shutters of any description exc 2.0 sqmtr each

Supply & fix kota stone slab 20-25 mm thick as in floor of size not less than (550mm x 550mm) etc over and including 15mm screed bed in cement mortar 1:6 cement & jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing & polishing to achive better finish complete all as specified and directed .

S&F for galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc including dismantling of existing old fencing wires complete as directed (each line wire to be measured)

All as per above item No 23 but except barbed wire (restraining, resecuring including making good staples etc)

S&F for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and supplying and fixing of GI wire mesh of 0.56mm nominal dia and 1.18mm size aperture to ceiling on GI frame work to receive POP false ceiling complete all as specified and as directed.

Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface with sunk or raised mouldings over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately)

M&L for applying two coats of acrylic emulsion paint over and including wall care putty 3mm thick including preparation of ceiling surfaces complete complete all as specified and as directed.

MS SHUBHAM SANTOSH JAIN

M/S KAUSHIK CONSTRUCTION

M/s Shri krishna Constrcutions

M/s R D Enterprises