Development of new A site Retail Outlet at WITHIN 5 KM FROM THE JUCTION OF NH27 AND SIALMARI ROAD ON SIALMARI-BIJNI STATION ROAD, ASSAM under Guwahati DO

STATEMENT OF CREDENTIAL & BID SUBMISSION CHECKLIST

Tender Ref. No.: MAC/ERO/37/2025-26/PT-73 Name of Work: Development of new A site Retail Outlet at WITHIN 5 KM FROM THE JUCTION OF NH27 AND SIALMARI ROAD ON SIALMARI-BIJNI STATION ROAD, ASSAM under Guwahati DO

Note: 1.Bidders have to submit duly filled Statement of Credentials. Data is to be filled by the Bidders only in WHITE coloured cells. 2. Necessary supporting documents to be enclosed. 3. Corporation reserves the right to assess the bidder’s capacity and capability if necessary by visiting/ inspecting recently executed / under execution of works.

S N Particulars Details Uploaded:

(A) General Information

1 Name of the bidder:

2 Address of the Bidder

3 Login E-Mail id for portal

4 Correspondence E-Mail id as per portal

5 Name of Contact Person:

6 Contact Person's Mobile no -

7 Company details: Type of Firm

8 Copy of PAN card (For Indian bidders / Indian Agents of Foreign Bidders)

9 Copy of GST Registration (For Indian bidders / Indian Agents of Foreign Bidders)

10 Copy of PF registration

11 Partnership deed (For Indian bidders – The deed should be registered with Registrar of Firms)

Certificate of Incorporation with memorandum and articles of Association (as applicable for partnership firms and companies)

1 Earnest Money Deposit Instrument Ref:

(C) PQC Documents

2 Turn Over Criteria (In Rs.)

2.1 FY 2024-25 UDIN no.:

2.2 FY 2023-24 UDIN no.:

2.3 FY 2022-23 UDIN no.:

3 Similar Work: Work completed by the bidder, as main contractor, or as sub-contractor, during last seven years ending last day of month previous to the original end date of bid submission. The value of completed work for evaluation shall be considered as under:

3.1 1st Work Order

a Description of Work/Purchase/Services

b Name of Client with Address

c Contact Person & Contact detail of End client

d E-mail id of End Client

e WO/PO Ref No / Date / Amount

f Schedule of Rates/ Scope of Works Document

g Completion Certificate Ref No / Date / Amount/Actual Executed Amount of Work

h Date of Actual Completion as per Completion Certificate

i TDS Certificate/Bank Statement for proof of payment

j CA certificate for executed work

k Certificate from the end user / owner / consultant of the owner acting as EIC stating that the main contractor has intimated them about the engagement of sub-contracting OR have been allowed/ permitted as a subcontractor (IF APPLICABLE)

3.2 2nd Work Order

a Description of Work/Purchase/Services

b Name of Client with Address

c Contact Person & Contact detail of End client

d E-mail id of End Client

e WO/PO Ref No / Date / Amount

f Schedule of Rates/ Scope of Works Document

g Completion Certificate Ref No / Date / Amount/Actual Executed Amount of Work

h Date of Actual Completion as per Completion Certificate

i TDS Certificate/Bank Statement for proof of payment

j CA certificate for executed work

k Certificate from the end user / owner / consultant of the owner acting as EIC stating that the main contractor has intimated them about the engagement of sub-contracting OR have been allowed/ permitted as a subcontractor (IF APPLICABLE)

3.3 3rd Work Order

a Description of Work/Purchase/Services

b Name of Client with Address

c Contact Person & Contact detail of End client

d E-mail id of End Client

e WO/PO Ref No / Date / Amount

f Schedule of Rates/ Scope of Works Document

g Completion Certificate Ref No / Date / Amount/Actual Executed Amount of Work

h Date of Actual Completion as per Completion Certificate

i TDS Certificate/Bank Statement for proof of payment

j CA certificate for executed work

k Certificate from the end user / owner / consultant of the owner acting as EIC stating that the main contractor has intimated them about the engagement of sub-contracting OR have been allowed/ permitted as a subcontractor (IF APPLICABLE)

(D) OTHER ESSENTIAL COMMERCIAL CRITERIA:

1 Copy of PAN card (For Indian bidders / Indian Agents of Foreign Bidders)

2 Copy of GST Registration (For Indian bidders / Indian Agents of Foreign Bidders)

3 Copy of PF registration

4 Power of Attorney / Authority of the person uploading the bids / Board Resolution along with

a) Certificate of incorporation (COI), Memorandum of Association (MOA) and Articles of Association (AOA) in case of Company. Or

b) Partnership Deed, Or

c) Declaration of sole proprietor

(E) OTHER DOCUMENTS:

1 Undertaking by the Tenderer(s) on acceptance of tender terms & conditions- Annexure ‘A’ of Technical Bid Part-B.

2 Declaration on Proceedings Under Insolvency and Bankruptcy Code, 2016 (Bidding Stage)- Annexure ‘B’ of Technical Bid Part-B.

3 Compliance Certificate for bidders from a country which shares a land border with India- Annexure ‘C’ of Technical Bid Part-B.

4 Undertakings and declarations for non-tampering of data- Annexure ‘D’ of Technical Bid Part-B.

5 Declaration of blacklisting / holiday listing clearly mentioning the details of Holiday listing or "NIL" in case of no details - Annexure ‘E’ of Technical Bid Part-B.

6 Details on Relationship with IOCL's Directors (Declaration "A", "B"& "C") - Annexure ‘F’ of Technical Bid Part-B.

7 Undertaking for business transaction status of bidders- Annexure ‘G’ of Technical Bid Part-B.

8 Particulars of bidder firm- Annexure ‘H’ of Technical Bid Part-B.

9 Undertaking on no multiple bidding- Annexure ‘I’ of Technical Bid Part-B.

10 Declaration for availing Purchase Preference on purchase preference (PP-MII) policy) – Bid Stage - Annexure ‘J (Part-I)’ of Technical Bid Part-B.

11 Declaration on purchase preference (linked with local content) (PP-MII) policy- Annexure ‘J (Part-II)’ of Technical Bid Part-B.

Percentage BoQ NQ

Select, At Par, Excess (+), Less (-) IOCL Select Excess (+) Less (-) At Par (=) Not Quoted Select Excess (+) Less (-) At Par (=)

Tender Inviting Authority: General Manager I/c (Materials & Contract), Eastern Regional Office

Name of Work: Development of new A site Retail Outlet at WITHIN 5 KM FROM THE JUCTION OF NH27 AND SIALMARI ROAD ON SIALMARI-BIJNI STATION ROAD, ASSAM under Guwahati DO

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Item Description Item Code / Make Qty Units Estimated Rate IN Rs. P. Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P GST PERCENT (%) Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

1 LAND DEVELOPMENT item_code_1

2 Clearing grass and removal of the rubbish outside site premises and at an unobjectionable place. item_code_2 M2 Excess(+) Full Conversion INR

3 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm. depth dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth within premises item_code_3 M2 Excess(+) Full Conversion INR

4 CONSTRUCTION OF SALES BUILDING : item_code_4

5 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling & neatly dressing of disposed soil completely to be paid separately as per item no. MPLCN00600 item_code_5

6 i) All kinds of Soil item_code_6 M3 Excess(+) Full Conversion INR

7 Extra for every additional lift of 1.5m or part thereof in excavation or banking excavated or stacked materials in all kinds of soil item_code_7 M3 Excess(+) Full Conversion INR

8 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, within premises and lift upto 1.5m item_code_8 M3 Excess(+) Full Conversion INR

9 Supplying and filling in plinth with sand within specified grading zone of fine aggregates specified in table 3.1, clause 3.1.3 of attached specifications under floors, etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming including watering, consolidating and dressing complete. item_code_9

10 i) Local Fine Sand within grading zone IV item_code_10 M3 Excess(+) Full Conversion INR

11 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size). Item includes providing & mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specifications. Providing & applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes & finally with a piece of cloth lightly soaked in kerosene oil item_code_11 M2 Excess(+) Full Conversion INR

12 v) PCC 1 Cement:3 Coarse Sand:6 Graded Stone Aggregate 20mm item_code_12 M3 Excess(+) Full Conversion INR

13 Providing and laying in position cement concrete of specified grade excluding cost of centering & shuttering. All work up to plinth level: item_code_13

14 iii) 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm) item_code_14 M3 Excess(+) Full Conversion INR

15 v) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 20mm) item_code_15 M3 Excess(+) Full Conversion INR

16 viii) 1:4:8(1 Cement :4 Coarse Sand :8 Graded stone aggregate of 40mm) item_code_16 M3 Excess(+) Full Conversion INR

17 Centering and shuttering including strutting, propping etc. and removal of form work for: item_code_17

18 i) Foundations,footings,bases of column item_code_18 M2 228.36 Excess(+) Full Conversion INR

19 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level item_code_19

20 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_20 M3 Excess(+) Full Conversion INR

21 Providing & Laying Reinforced cement concrete work in walls (Any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level UP TO FLOOR V LEVEL excluding cost of centering, shuttering, finishing and reinforcement : item_code_21

22 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_22 M3 Excess(+) Full Conversion INR

23 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size) item_code_23 M3 7410.88 Excess(+) Full Conversion INR

24 Providing and laying RCC work in vertical and horizontal fins individually or forming box louvers, facias and eaves boards above plinth level up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). item_code_24 M3 6854.448 Excess(+) Full Conversion INR

25 Centering and shuttering including strutting, propping etc. and removal of form for : item_code_25

26 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_26 M2 228.36 Excess(+) Full Conversion INR

27 v) Columns, Pillars, Piers, Abutments, Posts and Struts. item_code_27 M2 Excess(+) Full Conversion INR

28 vii) Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards item_code_28 M2 Excess(+) Full Conversion INR

29 viii) Suspended floors, roofs,landings balconies and access platform with water proof ply 12mm thick item_code_29 M2 Excess(+) Full Conversion INR

30 ix) Lintels, beams, plinth beams, girders, bressumers cantilevers and with water proof ply 12mm thick item_code_30 M2 Excess(+) Full Conversion INR

31 Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels item_code_31

32 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_32 KG 66.944 Excess(+) Full Conversion INR

33 Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth item_code_33

34 ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH item_code_34 M3 Excess(+) Full Conversion INR

35 viii) Half brick masonry with common burnt clay F.P.S.(non modular) brick of class designation 7.5 in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH item_code_35 M2 Excess(+) Full Conversion INR

36 Providing and laying dry brick on edge flooring in required pattern with bricks of Class designation 7.5 on a bed of 12 mm mud mortar including filling joints with river sand with common burnt clay non- modular bricks item_code_36 M2 Excess(+) Full Conversion INR

37 Structural steel work riveted,bolted or welded in built up sections, trusses & framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: item_code_37 KG Excess(+) Full Conversion INR

38 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length,jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS 4454 Part-I & M.S. top cover of required thickness for rolling shutters:- 80x1.25mm MS laths with1.25 mm thick top cover item_code_38 M2 Excess(+) Full Conversion INR

39 Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Tiles of dark shade pigment using ordinary cement item_code_39 M2 Excess(+) Full Conversion INR

40 Providing & fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (minimum thickness of 5 mm) of approved make in all colours,shades except burgundy,bottle green,black of any size as approved by Engineer-in-Charge in skirting,risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade. item_code_40 M2 Excess(+) Full Conversion INR

41 Providing & laying Ceramic Glazed floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) jointing with grey cement slurry@ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc. complete. item_code_41 M2 Excess(+) Full Conversion INR

42 Providing & laying vitrified floor tile in different sizes (thickness as per manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar as specified with coarse sand jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc. complete for flooring/skirting as specified item_code_42

43 i) Flooring with size of Tiles 60x60Cm in cement mortar 1:4 item_code_43 M2 Excess(+) Full Conversion INR

44 Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, sills, facias, Pump Island & similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding & polishing to edge to give high gloss finish etc. complete at all levels. item_code_44

45 iv) Granite of any colour and shade having Area of slab over 0.50 sqm item_code_45 M2 Excess(+) Full Conversion INR

46 25mm Thick Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) item_code_46 M2 Excess(+) Full Conversion INR

47 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, Single socketed pipes. item_code_47

48 ii) 110 mm diameter item_code_48 M- Excess(+) Full Conversion INR

49 Providing and laying cement plaster on surfaces with fine sand including curing etc. item_code_49

50 ii)12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand) item_code_50 M2 Excess(+) Full Conversion INR

51 Providing and laying 6mm thick cement plaster on surfaces with fine sand including curing etc. item_code_51

52 i) 6mm thick plaster of mix 1:3 (1 cement: 3 fine sand) item_code_52 M2 Excess(+) Full Conversion INR

53 40mm Thick Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand:4 stone aggregate of 20mm nominal size) finished with a floating cement coat of neat including cement slurry, but excluding the cost of nosing of steps etc. complete. item_code_53 M2 Excess(+) Full Conversion INR

54 Painting top of roofs with residual type petroleum bitumen of grade VG10 of approved quality at 17kg per10sqm impregnated with a coat of coarse sand at 60 cudm per 10sqm including cleaning the slab surface with brushes & finally with a piece of cloth lightly soaked in kerosene oil complete. item_code_54 M2 Excess(+) Full Conversion INR

55 Providing and applying plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete item_code_55 M2 Excess(+) Full Conversion INR

56 Finishing walls with Acrylic Smooth exterior paint of required shade (2 or more coat applied @ 1.67 ltr/10 sqm over & including priming coat of exterior Primer applied @ 2.20kg/10 sqm) item_code_56 M2 Excess(+) Full Conversion INR

57 Finishing walls with Deluxe Multi surface paint system for interiors & exteriors using Primer as per manufacturers specifications with two or more coats applied on wall @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10sqm item_code_57 M2 Excess(+) Full Conversion INR

58 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture. item_code_58 M2 Excess(+) Full Conversion INR

59 Providing and fixing water closet squatting pan (Indian type W.C.pan) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C.flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required -White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. item_code_59 EA Excess(+) Full Conversion INR

60 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white PVC flushing cistern including flush pipe with manually controlled device (handle lever),conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required: item_code_60

61 i) W.C. pan with ISI marked white solid plastic seat and lid item_code_61 EA 4217.52 Excess(+) Full Conversion INR

62 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x 265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : item_code_62

63 i) One urinal basin with 5 litre white P.V.C. automatic flushing cistern item_code_63 EA Excess(+) Full Conversion INR

64 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : item_code_64

65 i) White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps item_code_65 EA Excess(+) Full Conversion INR

66 Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. item_code_66 EA Excess(+) Full Conversion INR

67 Providing and fixing toilet paper holder : item_code_67

68 i) C.P. brass item_code_68 EA Excess(+) Full Conversion INR

69 Providing and fixing soil, waste and vent pipes : item_code_69

70 i) 100mm dia Sand cast iron S&S pipe as per IS: 1729. item_code_70 M- 808.24 Excess(+) Full Conversion INR

71 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall item_code_71

72 i) 15 mm nominal outer dia Pipes item_code_72 M- Excess(+) Full Conversion INR

73 ii) 20 mm nominal outer dia Pipes item_code_73 M- Excess(+) Full Conversion INR

74 iii) 25 mm nominal outer dia Pipes item_code_74 M- Excess(+) Full Conversion INR

75 v) 40 mm nominal outer dia Pipes item_code_75 M- 519.96 Excess(+) Full Conversion INR

76 Providing and fixing B class G.I. pipes complete with G.I. fittings & clamps, i/c cutting & making good the walls etc. Internal work Exposed on wall. item_code_76

77 ii) 20 mm nominal outer dia Pipes item_code_77 M- Excess(+) Full Conversion INR

78 iii) 25 mm nominal outer dia Pipes item_code_78 M- Excess(+) Full Conversion INR

79 Providing and fixing brass bib cock of approved quality : item_code_79

80 i) 15 mm nominal bore item_code_80 EA Excess(+) Full Conversion INR

81 Providing and fixing brass stop cock of approved quality : item_code_81

82 i) 15 mm nominal bore item_code_82 EA Excess(+) Full Conversion INR

83 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : item_code_83

84 i) 25 mm nominal bore item_code_84 EA Excess(+) Full Conversion INR

85 iii) 40 mm nominal bore item_code_85 EA Excess(+) Full Conversion INR

86 Providing & fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : item_code_86

87 i) 100mm inlet & 100mm outlet SCI S&S as per IS - 3989. item_code_87 EA 1212.56 Excess(+) Full Conversion INR

88 Providing and placing on terrace (at all floor levels) polyethylene water storage tank IS : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank item_code_88 L- Excess(+) Full Conversion INR

89 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions,at top, bottom & sides with with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panelling, C.P. brass/stainless steel screws including fixing all complete as per drawing & the directions of Engineer-in-charge. (Cost of glazing or panels to be paid for separately) item_code_89

90 i) Fixed Glazing with Powder coated aluminium (minimum thickness of powder coating 50 micron) sections item_code_90 KG Excess(+) Full Conversion INR

91 iii) For shutters of doors, windows & ventilators with Powder coated aluminium sections including providing fixing hinges/ pivots & making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) item_code_91 KG Excess(+) Full Conversion INR

92 Providing and fixing panelling or panelling and glazing in panelled or panelled & glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : item_code_92

93 ii) 12mm thick particle board with Veneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming to IS:3097, Grade I item_code_93 M2 Excess(+) Full Conversion INR

94 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item): item_code_94

95 ii) With float glass panes of 5.0 mm thickness (weight not less than 12.5kg/sqm) item_code_95 M2 1039.28 Excess(+) Full Conversion INR

96 Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceilings, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15 mm dia, at a staggered pitch of 200 mm centre to centre including drilling holes in the receiving surface and expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge. item_code_96

97 ii) Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron) item_code_97 KG Excess(+) Full Conversion INR

98 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately). item_code_98 M2 Excess(+) Full Conversion INR

99 Providing & fixing chromium plated brass 100mm mortice latch & lock with 6 levers & a pair of lever handles with necessary screws etc complete (best make of approved quality). item_code_99 EA Excess(+) Full Conversion INR

100 Providing & fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete : item_code_100

101 i) 250x10 mm item_code_101 EA Excess(+) Full Conversion INR

102 ii) 200x10 mm item_code_102 EA Excess(+) Full Conversion INR

103 Providing & fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete : item_code_103

104 i) 125 mm item_code_104 EA Excess(+) Full Conversion INR

105 Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. item_code_105

106 i) With stainless steel cover plate minimum 1.25 mm thickness item_code_106 EA Excess(+) Full Conversion INR

107 Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc. complete as per direction of Engineer-in-Charge. item_code_107

108 i) Powder coated minimum thickness 50 micron aluminium tubular handle bar item_code_108 EA Excess(+) Full Conversion INR

109 Providing and fixing factory made 30mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75mm x 30mm having wall thickness 5mm. The styles, top & bottom rails shall have one side wall thickness of 15mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with MS tubes of size 33mm x 17mm x 1mm painted with primer, all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and rails with a cavity to receive single piece extruded 5mm PVC sheet as panel. The styles and rails shall be mitred cut and joint with help of PVC solvent cement and self tapping screws. Single piece extruded solid PVC lock rail of size 100mm x 30mm with wall thickness 5mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8mm complete as per manufacturer's specifications and direction of Engineer-in-charge item_code_109

110 i) Non Decorative finish item_code_110 M2 Excess(+) Full Conversion INR

111 CONSTRUCTION OF SEPTIC TANK & SOAK PIT :- item_code_111

112 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling & neatly dressing of disposed soil completely to be paid separately as per item no. MPLCN00600 item_code_112

113 i) All kinds of Soil item_code_113 M3 Excess(+) Full Conversion INR

114 v) PCC 1 Cement:3 Coarse Sand:6 Graded Stone Aggregate 20mm item_code_114 M3 Excess(+) Full Conversion INR

115 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level item_code_115

116 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_116 M3 6187.456 Excess(+) Full Conversion INR

117 Centering and shuttering including strutting, propping etc. and removal of form for : item_code_117

118 iii) Suspended floors,roofs,landings,balconies, access platform and Shelves (Cast in situ) item_code_118 M2 555.6 Excess(+) Full Conversion INR

119 Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels item_code_119

120 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_120 KG 66.944 Excess(+) Full Conversion INR

121 Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth item_code_121

122 ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH item_code_122 M3 4936.224 Excess(+) Full Conversion INR

123 Providing and laying cement plaster on surfaces with fine sand including curing etc. item_code_123

124 ii)12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand) item_code_124 M2 203.824 Excess(+) Full Conversion INR

125 Providing Neat cement punning item_code_125 M2 50.312 Excess(+) Full Conversion INR

126 Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth item_code_126

127 viii) Half brick masonry with common burnt clay F.P.S.(non modular) brick of class designation 7.5 in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH item_code_127 M2 620.296 Excess(+) Full Conversion INR

128 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and SW drain pipe 100 mm diameter, 1.8 m long complete as per standard design with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 item_code_128 EA 20265.112 Excess(+) Full Conversion INR

129 CONST. OF BOX CULVERT WITH OPEN DRAIN: item_code_129

130 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling & neatly dressing of disposed soil completely to be paid separately as per item no. MPLCN00600 item_code_130

131 i) All kinds of Soil item_code_131 M3 Excess(+) Full Conversion INR

132 v) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 20mm) item_code_132 M3 Excess(+) Full Conversion INR

133 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level item_code_133

134 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_134 M3 Excess(+) Full Conversion INR

135 Centering and shuttering including strutting, propping etc. and removal of form for : item_code_135

136 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_136 M2 228.36 Excess(+) Full Conversion INR

137 Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels item_code_137

138 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_138 KG Excess(+) Full Conversion INR

139 Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth item_code_139

140 ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH item_code_140 M3 Excess(+) Full Conversion INR

141 Structural steel work in built up sections/ framed work in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cutting,hoisting,fixing in position & applying a priming coat of approved steel primer etc. as required. item_code_141 KG Excess(+) Full Conversion INR

142 Providing and laying 6mm thick cement plaster on surfaces with fine sand including curing etc. item_code_142

143 i) 6mm thick plaster of mix 1:3 (1 cement: 3 fine sand) item_code_143 75 M2 Excess(+) Full Conversion INR

144 Providing Neat cement punning item_code_144 75 M2 Excess(+) Full Conversion INR

145 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, Single socketed pipes. item_code_145

146 ii) 110 mm diameter item_code_146 M- Excess(+) Full Conversion INR

147 CONSTRUCTION OF DRIVEWAY, APPROACH & BUFFER STRIP item_code_147

148 Construction of granular sub-base by providing close graded material conforming to specifications, mixing in a mechanical mixer plant at Optimum Moisture Content, carriage of mixed material by tippers to work site, for all lead and lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface & compacting with vibratory power roller to achieve the desired density, complete as per specification & direction of Engineer-in-charge. item_code_148

149 i) With material confirming to grade-I (size 75 mm to .075 mm) having CBR value - 30, Thickness as desired item_code_149 M3 Excess(+) Full Conversion INR

150 Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to .075 mm) to wet mix macadam (WMM) specifications including premixing the material with water at OMC for all leads and lifts, laying in uniform layers with mechanical paver finisher in sub-base/base course on well prepared surface and compacting with vibratory roller of 8 to 10 ton capacity to achieve the desired density, complete as per specifications & directions of Engineer-in- charge item_code_150 M3 Excess(+) Full Conversion INR

151 Providing & laying factory made reflective type Lacquered finish Grey / coloured pre-cast cement concrete, interlocking paver block of specified grade made by block making machine wih vibratory compaction & of approved size and design / shape, shade and manufacturers and as per IOCL's specifications. The paver blocks shall have peripheral chamfer, with average crushing strength as per IS 15658, maximum water absorption of 2% after 10 minutes and 5% after 24 hrs. as per BS 1881, maximum dimensional deviations of +/- 2mm on length @ width and +/- 3 mm on thickness. The job includes supplying and laying a layer of 50 mm thick clean coarse sand on thoroughly compacted sub-base below the paver blocks, cutting the paver blocks wherever required with hydraulic splitter, filling in the joints at the edges of paver blocks with sand, compacting with machine vibrator to required line and level, etc. complete. (Payment for provision of edge restraints shall be made separately) item_code_151

152 ii) M40 grade 80 mm thick reflective type Lacquered finish item_code_152 M2 Excess(+) Full Conversion INR

153 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling & neatly dressing of disposed soil completely to be paid separately as per item no. MPLCN00600 item_code_153

154 i) All kinds of Soil item_code_154 M3 Excess(+) Full Conversion INR

155 v) PCC 1 Cement:3 Coarse Sand:6 Graded Stone Aggregate 20mm item_code_155 M3 Excess(+) Full Conversion INR

156 Providing and laying in position cement concrete of specified grade excluding cost of centering & shuttering. All work up to plinth level: item_code_156

157 iii) 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm) item_code_157 M3 Excess(+) Full Conversion INR

158 Centering and shuttering including strutting, propping etc. and removal of form work for: item_code_158

159 i) Foundations,footings,bases of column item_code_159 M2 228.36 Excess(+) Full Conversion INR

160 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level item_code_160

161 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_161 M3 Excess(+) Full Conversion INR

162 Centering and shuttering including strutting, propping etc. and removal of form for : item_code_162

163 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_163 M2 228.36 Excess(+) Full Conversion INR

164 Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels item_code_164

165 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_165 KG Excess(+) Full Conversion INR

166 Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth item_code_166

167 ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH item_code_167 M3 Excess(+) Full Conversion INR

168 Providing and laying cement plaster on surfaces with fine sand including curing etc. item_code_168

169 ii)12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand) item_code_169 M2 Excess(+) Full Conversion INR

170 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : item_code_170 M2 Excess(+) Full Conversion INR

171 Providing and applying plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete item_code_171 M2 Excess(+) Full Conversion INR

172 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture. item_code_172 M2 Excess(+) Full Conversion INR

173 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement:3 coarse sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment) (Precast C.C. kerb stone shall be approved by Engineer-in-charge. item_code_173 M3 Excess(+) Full Conversion INR

174 Installation of AIR COMPRESSOR and DIGITAL AIR GAUGE item_code_174

175 Air compressor Supply and installation of horizontal air compressor assembly with delivery pressure of 12 kg/sq cm equipped with pressure gauge, non- return/safety/drain/delivery valves, automatic cut-off switch and suitable electrical connections & all standard accessories, including civil works: item_code_175

176 iii) Horizontal air compressor Assembly of 5 HP (160-220 LITRES) including civil works item_code_176 EA Excess(+) Full Conversion INR

177 Tyre Inflator Supply & installation of Digital tyre inflator which is microprocessor based, automatic air pressure controller with solenoid controlled nozzle for automatic fill and release functions. Complete with weather proof cabinet, 3 digit LED displays with backlight illuminations i.e. one for actual tyre pressure and another for set pressure. Air filter, remote controller, cables, PVC hose pipe and working pressure upto 10bar (Excluding civil work for foundation,etc.) item_code_177 EA Excess(+) Full Conversion INR

178 i) All kinds of Soil item_code_178 0.000 M3 Excess(+) Full Conversion INR

179 i) Local Fine Sand within grading zone IV item_code_179 M3 Excess(+) Full Conversion INR

180 viii) 1:4:8(1 Cement :4 Coarse Sand :8 Graded stone aggregate of 40mm) item_code_180 M3 Excess(+) Full Conversion INR

181 i) Foundations,footings,bases of column item_code_181 M2 Excess(+) Full Conversion INR

182 i) Brick work in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH item_code_182 M3 Excess(+) Full Conversion INR

183 Structural steel work in built up sections/ framed work in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cutting,hoisting,fixing in position & applying a priming coat of approved steel primer etc. as required. item_code_183 KG Excess(+) Full Conversion INR

184 iii) 3 Core x 1.5 sq. mm. (copper) item_code_184 M- Excess(+) Full Conversion INR

185 vi) 3 Core x 1.5 sq. mm. item_code_185 EA Excess(+) Full Conversion INR

186 iii) 25 mm nominal outer dia Pipes item_code_186 M- Excess(+) Full Conversion INR

187 iii) Granite of any colour and shade having Area of slab upto 0.50 sqm item_code_187

188 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture. item_code_188 M2 Excess(+) Full Conversion INR

189 i) Profile Sheet for roofing item_code_189 M2 Excess(+) Full Conversion INR

190 ii) Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron) item_code_190 KG Excess(+) Full Conversion INR

191 Supply and Fixing of Discrete LED (Light Emitting Diode) Tube lights of 18 Watt, having IP65 protection class with Pressure Die Cast Aluminium housing & with Polycarbonate diffuser of approved make or equivalent as per direction of Engineer in charge. The LED shall be operating under voltage range of 140-270V with power factor more than 0.9. CCT(Correlated Colour temperature) shall be 5700 Kelvin (5665 K +/- 355 K), CRI (Colour rendering index) not less than 65. LED efficacy should be minimum 100 lumens/watt. The driver shall be of constant volt & constant current type with internal surge protection. Each lot of Fittings shall have serial numbers and accompany LM79 / IS 16106 test reports and reference/batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of at least 72 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminarie etc. item_code_191 EA Excess(+) Full Conversion INR

192 iv) 6 module frame item_code_192 EA Excess(+) Full Conversion INR

193 viii) 15 A Modular switch item_code_193 EA Excess(+) Full Conversion INR

194 x) 15 A 6 Pin Modular socket item_code_194 EA Excess(+) Full Conversion INR

195 i) Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. item_code_195 EA Excess(+) Full Conversion INR

196 vii) 6 Core x 2.5 sqmm Copper Cable FRLS item_code_196 M- Excess(+) Full Conversion INR

197 ii) Upto 32A DP MCB item_code_197 EA Excess(+) Full Conversion INR

198 xii) 4 Core x 6 sq. mm item_code_198 EA Excess(+) Full Conversion INR

199 Chemical Earthing with Copper Bonded Rod suitable for current carrying capacity of 15kA for 1 second - Supply of chemical earthing Cu Bonded High Tensile Low Carbon Steel Rod of dia not less than 17mm electrode complying to UL 467 Requirements & suitable for current carrying capacity of 15kA for 1 second, exothermic welded & 3Mtr long item_code_199 EA Excess(+) Full Conversion INR

200 iii) 50 x 6 mm G.I. Strip item_code_200 M- Excess(+) Full Conversion INR

201 v) 25 x 3 mm GI strip item_code_201 M- Excess(+) Full Conversion INR

202 i) Pipes,cables etc. not exceeding 80mm dia item_code_202 M- Excess(+) Full Conversion INR

203 CONSTRUCTION OF CANOPY item_code_203

204 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling & neatly dressing of disposed soil completely to be paid separately as per item no. MPLCN00600 item_code_204

205 i) All kinds of Soil item_code_205 36 M3 Excess(+) Full Conversion INR

206 Supplying and filling in plinth with sand within specified grading zone of fine aggregates specified in table 3.1, clause 3.1.3 of attached specifications under floors, etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming including watering, consolidating and dressing complete. item_code_206

207 i) Local Fine Sand within grading zone IV item_code_207 M3 Excess(+) Full Conversion INR

208 v) PCC 1 Cement:3 Coarse Sand:6 Graded Stone Aggregate 20mm item_code_208 M3 Excess(+) Full Conversion INR

209 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level item_code_209

210 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_210 M3 Excess(+) Full Conversion INR

211 Centering and shuttering including strutting, propping etc. and removal of form for : item_code_211

212 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_212 M2 228.36 Excess(+) Full Conversion INR

213 Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels item_code_213

214 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_214 KG Excess(+) Full Conversion INR

215 Supplying and fixing MS foundation bolts with necessary GI nuts and washers of specified sizes,all conforming to relevant Indian Standards and as approved by Engineer-in-charge : item_code_215

216 v) 25mm dia x 1000mm long with 100 mm dia x 8 mm thick plate item_code_216 EA 465.76 Excess(+) Full Conversion INR

217 Constructing masonry Chamber 60x60x75 cm,inside in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valves etc, with CI surface box 100mm. top diameter,160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), i/c necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement:3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S (non modular) bricks of class designation 7.5 item_code_217 EA Excess(+) Full Conversion INR

218 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : Light Duty item_code_218

219 ii) 150 mm dia. R.C.C. pipe item_code_219 M- Excess(+) Full Conversion INR

220 iv) 300 mm dia. R.C.C. pipe item_code_220 M- Excess(+) Full Conversion INR

221 Excavating trenches of required width for pipes, cables etc including excavation for sockets & dressing of sides, ramming of bottoms,depth upto 1.5m including taking out excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing surplus excavated soil as directed, within or outside site at unobjectionable place in all kinds of soil item_code_221

222 iv) Pipes, Cable etc. > 80mm < 300m dia item_code_222 M- 291.96 Excess(+) Full Conversion INR

223 Providing and fixing Klippon Galvalume steel profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of Cold rolled steel confirming to IS:513-2008 of base metal thickness 0.50 mm, having Yield Stress of Min. 275 MPa. Steel surface shall have hot dip metallic coating of Al-Zinc alloy comprising 55% Alluminium, 43.5% Zinc and 1.5% Silicon as per the ASTM-A792M, with total mass of coating on both sides shall be 150 gms/sqm. The steel shall have organic coating with Silicon Modified Polyester (SMP) /Super Durable Polyester (SDP) paint on continuous coil coating line. The thickness of coating on top side shall be 20-25 Microns (i.e. 15-18 microns SMP /SDP paint over 5-7 microns epoxy primer) and back side 8-10 Microns SMP/SDP paint over epoxy primer. Total Coated Thickness (TCT) shall be 0.58 MM. Sheet shall have protective guard film of thickness of 25 microns minimum to avoid scratches while transportation and should be supplied in single length up to 6m or as desired by Engineer-in-charge. item_code_223

224 ii) Plain Sheet for Ridges (500 - 600mm). item_code_224 M- Excess(+) Full Conversion INR

225 iii) Plain sheet for Flashings/ Aprons (Upto 600 mm) item_code_225 M- Excess(+) Full Conversion INR

226 iv) Plain Sheet for Gutter (600 mm over all girth) item_code_226 M- Excess(+) Full Conversion INR

227 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, Single socketed pipes. item_code_227

228 ii) 110 mm diameter item_code_228 M- Excess(+) Full Conversion INR

229 Providing & fixing BARE Klippon Galvalume steel profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of bare metal thickness 0.55 mm as per ASTM A446 having yield stress of 275mpa, surface shall have hot dip metallic coating of Aluminium Zinc alloy comprising of 55% aluminium,43.5% zinc & 1.5% silicon, Sheet shall have protective guard film of 25 microns minimum to avoid scratches while transportation & should be supplied in single length up to 6m or as desired by Engineer-in-charge. item_code_229 M2 Excess(+) Full Conversion INR

230 Providing and fixing 150F/200F flush panel,(pre-coated steel) False Ceiling made of Cold rolled steel sheet conforming to IS 513, having minimum yield stress and tensile stress as 240 Mpa and 300 Mpa respectively. Base metal thickness for ceiling panel and Carriers shall be 0.45mm and 0.55mm respectively. The steel surface shall have hot dip metallic coated with Zinc coating (galvanizing) as per IS277, with total mass of coating on both sides shall be 120 gms/sqm. The steel shall have organic coating with Regular Modified Polyester (RMP) paint on continues coil coating line. The thickness of coating on top side shall be 20-25 Microns (i.e. 15-18 microns RMP paint, over 5-7 microns epoxy primer) and back side 8-10 Microns RMP paint over epoxy primer. Total Coated Thickness (TCT) shall be 0.50 MM for Ceiling panel and 0.60 MM for Carrier. Sheet shall have protective Sheet shall have protective guard film of thickness of 25 microns minimum to avoid scratches while transportation and should be supplied in single length up to 6m (for panel) and up to 5m (for carrier) or as desired by Engineer-in-charge. The ceiling panel shall be clipped into carriers which are suspended from steel trusses/purlins with the help of GI suspension angle of size 25x25x0.5mm thick by means of rigid suspension system meant for exterior. The longitudinal joints of two panels shall be butt joined with a special type of panel splice to be fixed from inner side. The carrier will be joined with carrier splices maintaining a module of 150 mm. The spans shall not exceed as recommended and manufacturer recommendations shall be followed on installation procedure. item_code_230 M2 Excess(+) Full Conversion INR

231 Structural steel work riveted,bolted or welded in built up sections, trusses & framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: item_code_231 KG Excess(+) Full Conversion INR

232 CABLING AND ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. whereever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items item_code_232

233 iv) 3 Core x 2.5 sq. mm Copper Cable FRLS item_code_233 M- Excess(+) Full Conversion INR

234 CABLE TERMINATION GLANDS NON-FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination (NON FLP): Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of NON FLP heavy duty Double Compresson cable glands, crimping type lugs and allied jointing materials, etc. all complete as per specification and direction of Engineer In-charge. Glands and lugs shall be of approved make. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used. item_code_234

235 vii) 3 Core x 2.5 sq. mm item_code_235 EA Excess(+) Full Conversion INR

236 Providing, fixing, testing and commissioning of FLP junction box of approved make for cable connection/ jointing. item_code_236

237 i) For cables 2.5 to 4 sqmm XLPE / AYFY item_code_237 EA Excess(+) Full Conversion INR

238 Supply and fixing of Linear Recessed mounted LED (Light Emitting Diode) Light fittings of size 2400mm and 80 Watt, having IP 65 protection class with Pressure Die Cast Aluminium housing and with Polycarbonate diffuser of approved make or equivalent as per direction of Engineer-in-charge. High Efficiency Translucence(HET) diffuser. Colour Rendering Index CRI>80, Temp-0 to 45 Deg C, Driver efficiency>85%, THD < 10%, CCT- 6500 K Powerfactor>0.95, Surge protection-2 kV, Multistage Isolated Constant Current-Constant Voltage operated driver with range 140-270V AC and Safety Extra Low Voltage Safe level < 60V DC as per IEC standard, Luminaire lumen ≥ 2100lm. Each lot of Fittings shall have serial numbers & accompany LM79 / IS 16106 test reports and reference/batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of at least 72 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminarie etc item_code_238 EA 9273.04 Excess(+) Full Conversion INR

239 CONSTRUCTION OF SINGLE SIDED HOARDING and INGRESS, EGRESS Display board item_code_239

240 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling & neatly dressing of disposed soil completely to be paid separately as per item no. MPLCN00600 item_code_240

241 i) All kinds of Soil item_code_241 0.999 M3 Excess(+) Full Conversion INR

242 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, within premises and lift upto 1.5m item_code_242 M3 Excess(+) Full Conversion INR

243 v) PCC 1 Cement:3 Coarse Sand:6 Graded Stone Aggregate 20mm item_code_243 M3 Excess(+) Full Conversion INR

244 Providing and laying in position cement concrete of specified grade excluding cost of centering & shuttering. All work up to plinth level: item_code_244

245 ii) 1:1½:3(1 Cement :1½ Coarse Sand: 2 Graded stone aggregate of 20mm) item_code_245 M3 Excess(+) Full Conversion INR

246 Providing and laying cement plaster on surfaces with fine sand including curing etc. item_code_246

247 ii)12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand) item_code_247 M2 Excess(+) Full Conversion INR

248 Structural steel work riveted,bolted or welded in built up sections, trusses & framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: item_code_248 KG Excess(+) Full Conversion INR

249 Painting on G.S. sheet with synthetic enamel paint of approved brand & manufacture of required colour to give an even shade, 2 or more coats,including a coat of approved steel primer but excluding a coat of mordant solution item_code_249 M2 Excess(+) Full Conversion INR

250 Centering and shuttering including strutting, propping etc. and removal of form work for: item_code_250

251 i) Foundations,footings,bases of column item_code_251 M2 228.36 Excess(+) Full Conversion INR

252 Supply and fixing of 30 W LED (Light Emitting Diode) light fixture with fittings and accessories for hoarding light purposes having IP65 protection class with Pressure Die Cast LM6/ADC12/LM24 housing and with toughened glass or UV stabilized polycarbonate cover type of approved make or equivalent as per direction of Engineer-in-charge. The LED driver shall have an in-built high voltage cutoff >= 290 V with power factor of complete fitting greater than 0.90. CCT (Correlated Colour temperature) shall be in the range of 5665 K +/- 355 K as per ANSI standard C78.377, CRI (Colour rendering index) should include all colour range from R1 to R15 and > 70 for outdoor luminaire. LED efficacy shall be greater than 140 lumens/watt @ 350mA drive current. The minimum system lumen efficacy of the luminaire shall be 100 Lumens per Watt. The Surge Protection Device (SPD) should be series type with fail safe, surge protection for minimum 3kV shall be provided. Supply of complete fitting with all accessories as per specification attached and as per direction of engineer in charge. Each lot of fittings shall accompany test certificates LM79/ IS:16106 and reference/ batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of minimum 60 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminaire etc. item_code_252 EA Excess(+) Full Conversion INR

253 CABLE TERMINATION GLANDS NON-FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination (NON FLP): Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of NON FLP heavy duty Double Compresson cable glands, crimping type lugs and allied jointing materials, etc. all complete as per specification and direction of Engineer In-charge. Glands and lugs shall be of approved make. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used. item_code_253

254 vi) 3 Core x 1.5 sq. mm. item_code_254 EA Excess(+) Full Conversion INR

255 vii) 3 Core x 2.5 sq. mm item_code_255 EA Excess(+) Full Conversion INR

256 CABLING AND ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. whereever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items item_code_256

257 iv) 3 Core x 2.5 sq. mm Copper Cable FRLS item_code_257 M- Excess(+) Full Conversion INR

258 i) 2 Core x 1.5 sq. mm. (copper) item_code_258 M- Excess(+) Full Conversion INR

259 Supply & drawing/laying, jointing, connecting, testing and commissioning of earth strip/copper strip/GI wire for earthing and lightning protection under or aboveground complete as per specification for the following : item_code_259

260 v) 25 x 3 mm GI strip item_code_260 M- Excess(+) Full Conversion INR

261 Supply & fixing of weatherproof 125 mm dia junction box (4 way entry) of BALIGA/CEAG-FCG/FLEXPRO/FEPL make including clamping arrangement, all complete as per specification & direction of Engineer In-charge. item_code_261 EA Excess(+) Full Conversion INR

262 STANDARD DISPLAY BOARD-EGRESS SIDE item_code_262

263 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling & neatly dressing of disposed soil completely to be paid separately as per item no. MPLCN00600 item_code_263

264 i) All kinds of Soil item_code_264 M3 Excess(+) Full Conversion INR

265 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, within premises and lift upto 1.5m item_code_265 M3 Excess(+) Full Conversion INR

266 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level item_code_266

267 i) RCC 1 Cement :1 Coarse Sand: 2 Graded Stone Aggregate 20mm item_code_267 M3 Excess(+) Full Conversion INR

268 Centering and shuttering including strutting, propping etc. and removal of form for : item_code_268

269 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_269 M2 228.36 Excess(+) Full Conversion INR

270 Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels item_code_270

271 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_271 KG Excess(+) Full Conversion INR

272 Supplying and fixing MS foundation bolts with necessary GI nuts and washers of specified sizes,all conforming to relevant Indian Standards and as approved by Engineer-in-charge : item_code_272

273 i) 12mm dia x 300mm long with 75 mm dia x 3 mm thick plate item_code_273 EA 38.12 Excess(+) Full Conversion INR

274 Steel work in built up tubular (round,square or rectangular hollow tubes etc) trusses etc. including cutting,hoisting fixing in position and applying a priming coat of approved steel primer, including welded and bolted with special shaped washers etc. complete. item_code_274

275 i) Hot finished welded type tubes item_code_275 KG Excess(+) Full Conversion INR

276 Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceilings, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15 mm dia, at a staggered pitch of 200 mm centre to centre including drilling holes in the receiving surface and expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge. item_code_276

277 ii) Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron) item_code_277 KG Excess(+) Full Conversion INR

278 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture. item_code_278 M2 Excess(+) Full Conversion INR

279 CABLING AND ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. whereever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items item_code_279

280 iv) 3 Core x 2.5 sq. mm Copper Cable FRLS item_code_280 M- Excess(+) Full Conversion INR

281 Excavating trenches of required width for pipes, cables etc including excavation for sockets & dressing of sides, ramming of bottoms,depth upto 1.5m including taking out excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing surplus excavated soil as directed, within or outside site at unobjectionable place in all kinds of soil item_code_281

282 i) Pipes,cables etc. not exceeding 80mm dia item_code_282 M- Excess(+) Full Conversion INR

283 CABLE TERMINATION GLANDS NON-FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination (NON FLP): Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of NON FLP heavy duty Double Compresson cable glands, crimping type lugs and allied jointing materials, etc. all complete as per specification and direction of Engineer In-charge. Glands and lugs shall be of approved make. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used. item_code_283

284 vii) 3 Core x 2.5 sq. mm item_code_284 EA Excess(+) Full Conversion INR

285 Supply & Fixing of Weatherproof (IP-65) Thermoplastic Cable Junction Box with terminal block fitted inside the box suitable for following cable sizes. item_code_285

286 i) for 2.5 sq.mm. cable entry size with 9 terminals item_code_286 EA Excess(+) Full Conversion INR

287 Supply and installation of MCB distribution board having Double door complete with tinned cu bus bar, neutral bus bar, earth bar, din bar, interconnection, earthing etc. without incoming isolator and MCBs item_code_287

288 ii) 2+8 way SPN item_code_288 EA Excess(+) Full Conversion INR

289 Supplying and fixing of following MCBs with necessery inter connections on existing DB, Panel board etc. item_code_289

290 ii) Upto 32A DP MCB item_code_290 EA Excess(+) Full Conversion INR

291 Supply and Fixing of Discrete LED (Light Emitting Diode) Tube lights of 18 Watt, having IP65 protection class with Pressure Die Cast Aluminium housing & with Polycarbonate diffuser of approved make or equivalent as per direction of Engineer in charge. The LED shall be operating under voltage range of 140-270V with power factor more than 0.9. CCT(Correlated Colour temperature) shall be 5700 Kelvin (5665 K +/- 355 K), CRI (Colour rendering index) not less than 65. LED efficacy should be minimum 100 lumens/watt. The driver shall be of constant volt & constant current type with internal surge protection. Each lot of Fittings shall have serial numbers and accompany LM79 / IS 16106 test reports and reference/batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of at least 72 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminarie etc. item_code_291 EA Excess(+) Full Conversion INR

292 STANDARD DISPLAY BOARD-INGRESS SIDE item_code_292

293 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling & neatly dressing of disposed soil completely to be paid separately as per item no. MPLCN00600 item_code_293

294 i) All kinds of Soil item_code_294 M3 Excess(+) Full Conversion INR

295 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, within premises and lift upto 1.5m item_code_295 M3 176.08 Excess(+) Full Conversion INR

296 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level item_code_296

297 i) RCC 1 Cement :1 Coarse Sand: 2 Graded Stone Aggregate 20mm item_code_297 M3 7320.92 Excess(+) Full Conversion INR

298 Centering and shuttering including strutting, propping etc. and removal of form for : item_code_298

299 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_299 M2 228.36 Excess(+) Full Conversion INR

300 Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels item_code_300

301 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_301 KG 66.944 Excess(+) Full Conversion INR

302 Supplying and fixing MS foundation bolts with necessary GI nuts and washers of specified sizes,all conforming to relevant Indian Standards and as approved by Engineer-in-charge : item_code_302

303 i) 12mm dia x 300mm long with 75 mm dia x 3 mm thick plate item_code_303 EA 38.12 Excess(+) Full Conversion INR

304 Steel work in built up tubular (round,square or rectangular hollow tubes etc) trusses etc. including cutting,hoisting fixing in position and applying a priming coat of approved steel primer, including welded and bolted with special shaped washers etc. complete. item_code_304

305 i) Hot finished welded type tubes item_code_305 KG Excess(+) Full Conversion INR

306 Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceilings, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15 mm dia, at a staggered pitch of 200 mm centre to centre including drilling holes in the receiving surface and expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge. item_code_306

307 ii) Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron) item_code_307 KG Excess(+) Full Conversion INR

308 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture. item_code_308 M2 Excess(+) Full Conversion INR

309 CABLING AND ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. whereever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items item_code_309

310 iv) 3 Core x 2.5 sq. mm Copper Cable FRLS item_code_310 M- Excess(+) Full Conversion INR

311 Excavating trenches of required width for pipes, cables etc including excavation for sockets & dressing of sides, ramming of bottoms,depth upto 1.5m including taking out excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing surplus excavated soil as directed, within or outside site at unobjectionable place in all kinds of soil item_code_311

312 i) Pipes,cables etc. not exceeding 80mm dia item_code_312 M- Excess(+) Full Conversion INR

313 CABLE TERMINATION GLANDS NON-FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination (NON FLP): Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of NON FLP heavy duty Double Compresson cable glands, crimping type lugs and allied jointing materials, etc. all complete as per specification and direction of Engineer In-charge. Glands and lugs shall be of approved make. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used. item_code_313

314 vii) 3 Core x 2.5 sq. mm item_code_314 EA Excess(+) Full Conversion INR

315 Supply & Fixing of Weatherproof (IP-65) Thermoplastic Cable Junction Box with terminal block fitted inside the box suitable for following cable sizes. item_code_315

316 i) for 2.5 sq.mm. cable entry size with 9 terminals item_code_316 EA Excess(+) Full Conversion INR

317 Supplying and fixing of following MCBs with necessery inter connections on existing DB, Panel board etc. item_code_317

318 ii) Upto 32A DP MCB item_code_318 EA Excess(+) Full Conversion INR

319 Supply and Fixing of Discrete LED (Light Emitting Diode) Tube lights of 18 Watt, having IP65 protection class with Pressure Die Cast Aluminium housing & with Polycarbonate diffuser of approved make or equivalent as per direction of Engineer in charge. The LED shall be operating under voltage range of 140-270V with power factor more than 0.9. CCT(Correlated Colour temperature) shall be 5700 Kelvin (5665 K +/- 355 K), CRI (Colour rendering index) not less than 65. LED efficacy should be minimum 100 lumens/watt. The driver shall be of constant volt & constant current type with internal surge protection. Each lot of Fittings shall have serial numbers and accompany LM79 / IS 16106 test reports and reference/batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of at least 72 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminarie etc. item_code_319 EA Excess(+) Full Conversion INR

320 TRANSPORTATION AND INSTALLATION OF TANKS : item_code_320

321 Transportation of equipment from one location to another location including enroute all taxes, levies and unloading/loading by a suitable vehicle exclusively for this purpose (In case of tank same shall be loaded by the tank fabrication contractor) item_code_321

322 iii) 15/20 KL Tank with fittings : 0 - 30 Km item_code_322 LS Excess(+) Full Conversion INR

323 iv) 15/20 KL Tank with fittings: Add extra for each addtnl. Km above 30km item_code_323 KM Excess(+) Full Conversion INR

324 Installation of supplied 20 KL Tank as per specified drawings as per work description but excluding all works of kerb wall and Gasket for manhole including painting / doping with Shalimastic HD as applicable as per specifications complete. RCC works wherever mentioned shall be of grade M20 item_code_324

325 iv) In brick masonry pit with RCC matt under driveway including RCC top slab as per standard Drg. ENG/318. Manhole cover plates and frame to be paid separately . item_code_325 LS Excess(+) Full Conversion INR

326 Supply and Laying of 50 mm dia single wall flexible piping system comprising of Non-metallic HDPE (flexible) pipelines as per IOCL specifications and with manufacturer supplied fittings including all bends, tees, elbows, reducers, end connectors at DU & tank side etc and as required for complete underground piping job. The joints in the pipelines, except the end connections at tanks and dispensers shall be made by electro-fusion welding. The pipes shall be suitable for use with petroleum and ethanol blended fuels. The maximum operating pressure shall be 7Kg/sq.cm. Note: The make of HDPE Pipe should be CCOE approved. Pressure testing shall be done before the final backfilling. The civil works for installation viz. excavation, sand filling & back filling etc. shall be paid seperately. All metallic parts in the piping system shall be grounded as per the requirements of EN14125. item_code_326 M- Excess(+) Full Conversion INR

327 Supplying and filling in plinth with sand within specified grading zone of fine aggregates specified in table 3.1, clause 3.1.3 of attached specifications under floors, etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming including watering, consolidating and dressing complete. item_code_327

328 i) Local Fine Sand within grading zone IV item_code_328 M3 Excess(+) Full Conversion INR

329 Constructing masonry Chamber 60x60x75 cm,inside in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valves etc, with CI surface box 100mm. top diameter,160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), i/c necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement:3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S (non modular) bricks of class designation 7.5 item_code_329 EA Excess(+) Full Conversion INR

330 Supply and installation of screwed type gun metal valves as per IOC specifications: Ball Valve item_code_330

331 iii) S/I Screwed type GM Ball Valve of 50 mm dia item_code_331 EA Excess(+) Full Conversion INR

332 Supply & welding slip-on flanges conforming to IS2062 GrA, ANSI B16.5, Class#150 with 3 runs of weld outside and one run of weld inside the flanges as per specifications and standard Drg.enclosed herein item_code_332

333 iii) S/W Slipon flanges of 50 mm dia. conforming to IS2062 GrA, ANSI B16.5,Class 150 as per specifications and standard Drg.enclosed herein item_code_333 EA Excess(+) Full Conversion INR

334 Making flanged joints between flanges slip on, blind and flange etc. including providing/supplying 3 mm thick permanite oil gasket, nuts, bolts, bonding with 3 mm dia copper wire etc.complete as per IOCL specifications. item_code_334

335 i) Making Flange joint between Slip on,blind and flange etc.of 100mm dia. including gasket, nuts, bolts,3mm dia copper wire bonding item_code_335 EA Excess(+) Full Conversion INR

336 Supplying and installation of the following threaded coupling item_code_336

337 i) 80 mm dia Aluminium camlock coupling - Male only item_code_337 EA Excess(+) Full Conversion INR

338 Supply and installation of ‘U’ type CS bend on the vent pipes including painting as per specifications and supplying and brazing wire mesh of 11 mesh per linear centi-meter of non-corrosive metal in two layers on both ends. item_code_338

339 i) Supply & installation of U type CS bend on vent pipe of 80 mm dia item_code_339 EA Excess(+) Full Conversion INR

340 Providing stainless steel wire mesh 32 SWG, 11 mesh per linear cm of of non corrosive metal in two layers on existing vent hoods ‘U’ type (on both ends) including brazing, etc. complete item_code_340

341 i) 32SWG SS wire mesh both sides of existing U vent hood 80mm dia item_code_341 EA Excess(+) Full Conversion INR

342 Supply and fixing Pressure Vacuum Valves of 2 inches for fixing to the Vent Pipes of Underground MS tanks. The valve should be in closed position at normal operating pressure of the tank. The Valve shall be capable for activation at set pressure of 3" ± 0.5 water column to release excess pressure of tank to the atmosphere and open at vacuum of 8" ± 2.0 water column to induce the atmosphere pressure to the tank. PV valve should be diaphragm of dead weight or spring loaded type or combination of any. The weight of the PV valve shall not exceed 2.0 kg. top of the valve shall be provided with cover/cap/ weather hood to prevent the entry of rain water. Valve material,Cover and adopter shall be of Aluminium/polypropylene, diaphragm if used should be of Neoprene, O ring should be of rubber/neoprene, Net/Mesh Pressure puppet ,Vacuum puppet,screws and spring should be of stainless steel. Suitable adopter with one end fitted with valve and the other end should have threading for fixing on Vent pipe of 40mm. PV valves shall have: UL 842 certification of CARB approval or test certificate from any Govt.lab. PV valve shall have PESO approval. item_code_342 EA Excess(+) Full Conversion INR

343 Supply, fabrication, laying and testing of MS black, ERW welded, pipes, heavy class conforming to IS 1239, PART I as per IOCL specifications including pipeline fittings like bends, tee etc as required and as directed for Underground pipeline with doping item_code_343

344 ii) S/L Welded U/G HD MS Pipes of 80mm dia with fittings,doping item_code_344 M- Excess(+) Full Conversion INR

345 iii) S/L Welded U/G HD MS Pipes of 50mm dia with fittings,doping item_code_345 M- Excess(+) Full Conversion INR

346 iv) S/L Welded U/G HD MS Pipes of 40mm dia with fittings,doping item_code_346 M- Excess(+) Full Conversion INR

347 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling & neatly dressing of disposed soil completely to be paid separately as per item no. MPLCN00600 item_code_347

348 i) All kinds of Soil item_code_348 M3 Excess(+) Full Conversion INR

349 v) PCC 1 Cement:3 Coarse Sand:6 Graded Stone Aggregate 20mm item_code_349 M3 Excess(+) Full Conversion INR

350 Providing and laying in position cement concrete of specified grade excluding cost of centering & shuttering. All work up to plinth level: item_code_350

351 v) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 20mm) item_code_351 M3 Excess(+) Full Conversion INR

352 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level item_code_352

353 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_353 M3 Excess(+) Full Conversion INR

354 Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels item_code_354

355 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_355 KG Excess(+) Full Conversion INR

356 Centering and shuttering including strutting, propping etc. and removal of form for : item_code_356

357 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_357 M2 Excess(+) Full Conversion INR

358 Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth item_code_358

359 ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH item_code_359 M3 Excess(+) Full Conversion INR

360 Providing and laying cement plaster on surfaces with fine sand including curing etc. item_code_360

361 ii)12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand) item_code_361 M2 Excess(+) Full Conversion INR

362 Providing Neat cement punning item_code_362 M2 Excess(+) Full Conversion INR

363 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture. item_code_363 M2 Excess(+) Full Conversion INR

364 Providing and applying plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete item_code_364 M2 Excess(+) Full Conversion INR

365 Structural steel work riveted,bolted or welded in built up sections, trusses & framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: item_code_365 KG Excess(+) Full Conversion INR

366 CONST.OF PUMP ISLAND & DU INSTALLATION: item_code_366

367 Transportation of equipment from one location to another location including enroute all taxes, levies and unloading/loading by a suitable vehicle exclusively for this purpose (In case of tank same shall be loaded by the tank fabrication contractor) item_code_367

368 xi) MPD/MPP pumps upto 2 nos., 0-30 Km item_code_368 LS Excess(+) Full Conversion INR

369 xii) MPD/MPP pumps upto 2 nos., Add extra for every additional Km above 30km item_code_369 KM Excess(+) Full Conversion INR

370 vii) Mono/Duo pump/Air Comp/STP/All other pumps - upto 2 nos,0-30 Km item_code_370 LS Excess(+) Full Conversion INR

371 viii) Mono/Duo pump/Air Comp/STP/All other pumps - upto 2 nos, Add extra for every additional Km above 30km item_code_371 KM Excess(+) Full Conversion INR

372 Installation of supplied Multi Product Pumps / Dispensers on pump island as per manufacturers installation manual, drawings, including supplying, providing necessary frame of ISMC 100, foundation bolts, supplying and filling required quantity of dry sand in pit(s) below the pump item_code_372

373 i) 2 product - 4 nozzle MPPs/MPDs item_code_373 EA Excess(+) Full Conversion INR

374 Installation of Corporation supplied Standard Submersible Turbine Pump on the existing Manhole Cover as per drawing and direction of Engineer in Charge item_code_374 EA Excess(+) Full Conversion INR

375 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including taking out and disposal of excavated earth within or outside site to unobjectionable place and lift upto 1.5m, as directed by Engineer-in-charge. Disposed earth to be levelled and neatly dressed. Extra for levelling & neatly dressing of disposed soil completely to be paid separately as per item no. MPLCN00600 item_code_375

376 i) All kinds of Soil item_code_376 M3 Excess(+) Full Conversion INR

377 Supplying and filling in plinth with sand within specified grading zone of fine aggregates specified in table 3.1, clause 3.1.3 of attached specifications under floors, etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming including watering, consolidating and dressing complete. item_code_377

378 i) Local Fine Sand within grading zone IV item_code_378 M3 Excess(+) Full Conversion INR

379 v) PCC 1 Cement:3 Coarse Sand:6 Graded Stone Aggregate 20mm item_code_379 M3 Excess(+) Full Conversion INR

380 Providing and laying in position cement concrete of specified grade excluding cost of centering & shuttering. All work up to plinth level: item_code_380

381 iii) 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm) item_code_381 M3 Excess(+) Full Conversion INR

382 v) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 20mm) item_code_382 M3 Excess(+) Full Conversion INR

383 Centering and shuttering including strutting, propping etc. and removal of form for : item_code_383

384 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_384 M2 228.36 Excess(+) Full Conversion INR

385 Providing and laying Brick work with common burnt clay F.P.S (non Modular) bricks of class designation 7.5 in foundation & plinth item_code_385

386 ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH item_code_386 M3 Excess(+) Full Conversion INR

387 viii) Half brick masonry with common burnt clay F.P.S.(non modular) brick of class designation 7.5 in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH item_code_387 M2 Excess(+) Full Conversion INR

388 Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, sills, facias, Pump Island & similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding & polishing to edge to give high gloss finish etc. complete at all levels. item_code_388

389 iv) Granite of any colour and shade having Area of slab over 0.50 sqm item_code_389 M2 Excess(+) Full Conversion INR

390 Supplying and fixing of 10mm thick mirror polished black granite tiles for pump island edges etc. over 12mm thick CM 1:4 including cost of all materials and labour etc. complete. item_code_390 M2 Excess(+) Full Conversion INR

391 CABLING AND ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. whereever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items item_code_391

392 iii) 3 Core x 1.5 sq. mm. (copper) item_code_392 M- Excess(+) Full Conversion INR

393 iv) 3 Core x 2.5 sq. mm Copper Cable FRLS item_code_393 M- Excess(+) Full Conversion INR

394 CABLE TERMINATION GLANDS NON-FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination (NON FLP): Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of NON FLP heavy duty Double Compresson cable glands, crimping type lugs and allied jointing materials, etc. all complete as per specification and direction of Engineer In-charge. Glands and lugs shall be of approved make. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used. item_code_394

395 vi) 3 Core x 1.5 sq. mm. item_code_395 EA Excess(+) Full Conversion INR

396 vii) 3 Core x 2.5 sq. mm item_code_396 EA Excess(+) Full Conversion INR

397 Supplying, drawing sub-main/power wiring with PVC insulated Copper 1100 V grade FRLS type through heavy duty rigid PVC conduit either on wall or in concealed. The job include terminations at both ends through proper jointing materials all complete for the following Make of Insulated wires shall be as per approved make item_code_397

398 ii) 2 x 2.5 sq mm + 1 x 2.5 sq mm earth wire item_code_398 M- 139.47 Excess(+) Full Conversion INR

399 CONSTANT VOLTAGE TRANSFORMER Supplying, installation, testing and commissioning of single phase, air cooled constant voltage transformer of approved make having input voltage range of 180-260V and output voltage of 220/230V with sine wave output wave form and having automatic current limiting and short circuit protection including all accessories complete (for displays) for the following VA ratings. item_code_399

400 iii) 500VA CVT item_code_400 EA Excess(+) Full Conversion INR

401 PROVIDING INTERNAL WIRING item_code_401

402 ii) Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. item_code_402 EA Excess(+) Full Conversion INR

403 Chemical Earthing with Copper Bonded Rod suitable for current carrying capacity of 15kA for 1 second - Supply of chemical earthing Cu Bonded High Tensile Low Carbon Steel Rod of dia not less than 17mm electrode complying to UL 467 Requirements & suitable for current carrying capacity of 15kA for 1 second, exothermic welded & 3Mtr long item_code_403 EA Excess(+) Full Conversion INR

404 Supply & drawing/laying, jointing, connecting, testing and commissioning of earth strip/copper strip/GI wire for earthing and lightning protection under or aboveground complete as per specification for the following : item_code_404

405 i) 50 x 10mm G.I. Strip item_code_405 M- 325.78 Excess(+) Full Conversion INR

406 ii) 32 x 6 mm G.I.strip item_code_406 M- 124.46 Excess(+) Full Conversion INR

407 v) 25 x 3 mm GI strip item_code_407 M- 61.93 Excess(+) Full Conversion INR

408 PROVISION OF ELECTRIC PANEL & ALLIED ELECTRICAL WORKS item_code_408

409 PANEL BOARDS AND DISTRIBUTION BOARDS Supply, installation, testing and commissioning of cubicle type power and motor control centre panel fabricated out of 14 SWG sheet steel undergone 7 tank process,dust & vermin proof, floor mounting type, suitable for indoor use having cable entry from the bottom and having following specific components complete, control wiring etc. as per enclosed standard drawing. Any other components/hardware required to complete the panels but not mentioned here shall also be provided. Note: Both incomers should have mechanical interlock for proper & safe operation. The MCCB used for incomer feeder shall have short circuit, overload and earthfault protection and also shunt coil for ESD operation. The Bus Bar support shall be DMC/ SMC/Epoxy moulded. All equipment/components shall be mounted logically to have free access for maintenance, tightening of connections & visual inspection. All the metering equipment shall be Digital & mounted on the panel and size of meter shall be 96 mm x 96 mm. The Bus Bar shall be provided with heat shrunk PVC sleeves & all power terminals shall be stud type with properly shrouding to avoid accidental contact. Neoprene type gasket shall be provided at the doorof the panel. The enclosure of the Panel shall have IP52 degree of protection. 2 Nos earth terminal shall be provided at the Panel frame with extension link for earthing connections. Painting:The under surface shall be prepared by applying a coat of phosphate paint and coat of yellow zinc chromate primer. The under surface shall be made free from all imperfections before undertaking the finishing coat. After preparation of the under surface, the switchboard shall be spray painted with two coats of epoxy based final paint or shall be powder coated. Colour shade of final paint shall be RAL 7032. item_code_409

410 Medium RO, Standard drawing No. ENG/IOCL/PDIL-2. List of Componets are: (a) 1 No. MCCB (3P+N) of 100 A, 35 KA with O/L, E/F & S/C Releases for incomer from Electricity Board (b) AC Digital Voltmeter (0-500V) with built in selector switch for incomer from Electricty Board (c) AC Digital Ammeter (0-100A) with built in selector switch for incomer from Electricity Board (d) 1 No. FP, On Load, 100 A, Manually Operated Change over switch suitable for connection of Mains supply and 30 KVA DG Set /5 KW Solar system with required No. of MCCB (100 A,35 KA,3P+N) for change over between Mains supply and DG Set /Solar Supply along with 2 Nos 6A , SP, Control MCB with Indicating lamps. (e) 1 No. MCCB (3P+N) of 100A, 35 KA with UV coil O/L , E/F & S/C Releases for incomer from Electricity Board/DG Set/Solar Supply & 1 No 6A , SP, Control MCB with 3 Nos LED Type (RYB) Indicating lamps (f) 3 Nos 100/5 A CL1 10VA Current Transformers ; PT (50 VA) along with 2 A control fuse link and 1 No. 6A , SP, Control MCB (g) 1 No DP MCB of 40 A, 10 KA for supply of essential loads (h) 1 No Single Phase Contactor(3NO+3NC) for supply to essential loads (i) 1 No MCB DB Hosuing 6 Nos , 16 A, 10 KA DP MCB as outgoings for essential loads (j) 415 V, TP & N, 125 A, Al Bus Bar (k) 4 Nos MCB (3P+N) of 40 A,10 KA for supply of outgoing feeders 1-4 (l) 9 Nos DP MCB of 10 A, 10 KA in Outgoing Feeder -1 (m) 6 Nos DP MCB of 16 A, 10 KA & 3 Nos DP MCB of 20 A, 10 KA in outgoing Feeder-2 (n) 3 Nos DP MCB of 16 A, 10 KA & 6 Nos DP MCB of 20 A, 10 KA in outgoing Feeder-3 (o) 8 Nos TP MCB of 16 A, 10 KA & 1 Nos TP MCB of 25 A, 10 KA in outgoing Feeder-4 (p) Provision for Termination of Solar Power (Up to 10 KW) Incomer to Essential DB in Panel as per requirement of IOCL. item_code_410 EA 192934 Excess(+) Full Conversion INR

411 CABLING AND ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. whereever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items item_code_411

412 xviii) 3.5 Core x 50 sq. mm Aluminium Cable FRLS item_code_412 M- 239.04 Excess(+) Full Conversion INR

413 PROVIDING INTERNAL WIRING item_code_413

414 i) Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. item_code_414 EA Excess(+) Full Conversion INR

415 Providing following point wiring with standard wire/ cable, plug, fittings, with suitable sockets, suitable GI box with front plate etc. complete, to include circuits from distribution boards to individual point boards, suitable PVC casing capping and required accessories pulling of wires, etc. complete. item_code_415

416 i) Supplying and drawing following 2 pair 0.5 sq mm FR PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. item_code_416 M- Excess(+) Full Conversion INR

417 Supplying, drawing sub-main/power wiring with PVC insulated Copper 1100 V grade FRLS type through heavy duty rigid PVC conduit either on wall or in concealed. The job include terminations at both ends through proper jointing materials all complete for the following Make of Insulated wires shall be as per approved make item_code_417

418 i) 2 x 1.5 sq mm + 1 x 1.5 sq mm earth wire item_code_418 M- Excess(+) Full Conversion INR

419 ii) 2 x 2.5 sq mm + 1 x 2.5 sq mm earth wire item_code_419 M- Excess(+) Full Conversion INR

420 iii) 2 x 4 sq mm + 1 x 4 sq mm earth wire item_code_420 M- Excess(+) Full Conversion INR

421 iv) 2 x 6 sq mm + 1 x 6 sq mm earth wire item_code_421 M- Excess(+) Full Conversion INR

422 SWITCHES, FUSES, MCBS, ELCBS ETC Supply and fixing of Modular switch frame with inner and outer face plates and accessories as per following details of approved including flush metal boxes/surface mounting boxes, plates, etc. all complete as per manufacturer's specification and direction of Engineer In-charge. item_code_422

423 iii) 4 module frame item_code_423 EA Excess(+) Full Conversion INR

424 viii) 15 A Modular switch item_code_424 EA Excess(+) Full Conversion INR

425 xii) Fan Regulator of stepped modular type item_code_425 EA Excess(+) Full Conversion INR

426 Supply and Installation of Flame Proof ESD Push Button item_code_426 EA Excess(+) Full Conversion INR

427 Supply and Fixing of Discrete LED (Light Emitting Diode) Tube lights of 18 Watt, having IP65 protection class with Pressure Die Cast Aluminium housing & with Polycarbonate diffuser of approved make or equivalent as per direction of Engineer in charge. The LED shall be operating under voltage range of 140-270V with power factor more than 0.9. CCT(Correlated Colour temperature) shall be 5700 Kelvin (5665 K +/- 355 K), CRI (Colour rendering index) not less than 65. LED efficacy should be minimum 100 lumens/watt. The driver shall be of constant volt & constant current type with internal surge protection. Each lot of Fittings shall have serial numbers and accompany LM79 / IS 16106 test reports and reference/batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of at least 72 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminarie etc. item_code_427 EA Excess(+) Full Conversion INR

428 Supply and Fixing of Discrete LED (Light Emitting Diode) Tube lights of 8 Watt, having IP20 protection class with Pressure Die Cast Aluminium housing & with Polycarbonate diffuser of approved make or equivalent as per direction of Engineer in charge. The LED shall be operating under voltage range of 140-270V with power factor more than 0.9. CCT(Correlated Colour temperature) shall be 5700 Kelvin (5665 K +/- 355 K), CRI (Colour rendering index) not less than 65. LED efficacy should be minimum 100 lumens/watt. The driver shall be of constant volt & constant current type with internal surge protection. Each lot of Fittings shall have serial numbers & accompany LM79 / IS 16106 test reports & reference/batch nos of LEDs & fittings for verification at site. The supply of LED lighting shall be covered by a warranty of at least 72 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminarie etc. item_code_428 EA Excess(+) Full Conversion INR

429 CEILING FANS Supply & fixing of ceiling fan for inside of the sales building of following type: item_code_429

430 iii) 1200 mm sweep item_code_430 EA 1844.44 Excess(+) Full Conversion INR

431 EXHAUST FANS Supply and fixing of exhaust fan including electrical wiring all shall be with per specification and direction of site In charge. The fans shall be with louvers / shutters. (The job does not include making suitable cut out in the wall for fixing the fan). item_code_431

432 ii) 9" dia light duty, make Khaitan or equivalent item_code_432 EA Excess(+) Full Conversion INR

433 Supplying and fixing of MV Lightining Arrestor horn gap type as required item_code_433 EA Excess(+) Full Conversion INR

434 iii) Supply and fixing of shock treatment chart in English, Hindi & local language framed in glass framework. item_code_434 EA Excess(+) Full Conversion INR

435 Providing & fixing flexible copper cable PVC insulated of 16sqmm for connecting the earth grid/earth strip with the crocodile clip i/c cost of 1 no. crocodile clip (for tanker earthing & other job) item_code_435 EA Excess(+) Full Conversion INR

436 Supplying & Fixing of following items for electrical safety in switch rooms/DG rooms etc item_code_436

437 i) Electrical insulating mats made of PVC Elastomer 3mm Thick & 1 mtr wide near swichboards, etc as per direction of Engineer In charge. Mat should conform to IS 15652 Class A - suitable for safe working voltage of upto 33 kV. Test certificate to be provided with supply. Mat's top Surface should be Antiskid Dotted & Bottom Surface should be Textured for Floor Grip. Mat's top Surface should be Antiskid Dotted & Bottom Surface should be Textured for Floor Grip. item_code_437 M2 Excess(+) Full Conversion INR

438 Supply and Installation of 16 SWG MS/GI powder coated weather proof Earthing Box of following size with door and locking arrangement with lock and key. Box to be mounted on ISA 40x40x5 (Painted with black synthetic enamel paint) frame having 2 legs of length 800 mm (500 mm above ground and 300 mm below ground which is to be grouted with PCC 1:2:4). Bottom of box should have opening for incoming earth GI strips all complete, as per specification and direction of Engineer-in-charge. Note: EARTHING BOX in RED should be boldly written over the box. The box should have a hood at the top extending outwards such that no water should seep through inside the box during rainy season to avoid rusting. item_code_438

439 i) 450 X 300 X 250 mm item_code_439 EA 2606.15 Excess(+) Full Conversion INR

440 iv) 11 KV grade hand gloves, ISI mark item_code_440 EA Excess(+) Full Conversion INR

441 Formation of lighting protection arrangement with supply of 1.0 M height spike and erection at top most portion of structure/building and connecting the same to earthpit by 40x6mm GI strip (excluding supply and laying of GI strip) item_code_441 EA Excess(+) Full Conversion INR

442 SUPPLY AND INSTALLATION OF YARD LIGHTS : item_code_442

443 Supply & laying of Heavy Duty type, High compression strength, IP 67 rated (DWC) Double wall corrugated HDPE Conduits as per IS:14930/ IS:16205. Laying includes with GI pull wires inside the conduits & necessary ends to be filled with sealants, of all complete and as per drawing & specification. item_code_443

444 iii) 50 mm OD / 38 mm ID item_code_444 M- Excess(+) Full Conversion INR

445 Excavating trenches of required width for pipes, cables etc including excavation for sockets & dressing of sides, ramming of bottoms,depth upto 1.5m including taking out excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing surplus excavated soil as directed, within or outside site at unobjectionable place in all kinds of soil item_code_445

446 iv) Pipes, Cable etc. > 80mm < 300m dia item_code_446 M- 291.96 Excess(+) Full Conversion INR

447 Constructing masonry Chamber 60x60x75 cm,inside in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valves etc, with CI surface box 100mm. top diameter,160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), i/c necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement:3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S (non modular) bricks of class designation 7.5 item_code_447 EA Excess(+) Full Conversion INR

448 CABLING AND ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. whereever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items item_code_448

449 iv) 3 Core x 2.5 sq. mm Copper Cable FRLS item_code_449 M- Excess(+) Full Conversion INR

450 xviii) 3.5 Core x 50 sq. mm Aluminium Cable FRLS item_code_450 M- 239.04 Excess(+) Full Conversion INR

451 CABLE TERMINATION GLANDS NON-FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination (NON FLP): Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of NON FLP heavy duty Double Compresson cable glands, crimping type lugs and allied jointing materials, etc. all complete as per specification and direction of Engineer In-charge. Glands and lugs shall be of approved make. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used. item_code_451

452 vii) 3 Core x 2.5 sq. mm item_code_452 EA Excess(+) Full Conversion INR

453 Supply & drawing/laying, jointing, connecting, testing and commissioning of earth strip/copper strip/GI wire for earthing and lightning protection under or aboveground complete as per specification for the following : item_code_453

454 v) 25 x 3 mm GI strip item_code_454 M- Excess(+) Full Conversion INR

455 OCTAGONAL POLES Supply & Fixing of Octagonal Poles of following type (Civil job shall be paid separatly) : item_code_455

456 iii) S/E of 5 Meter high galvanised Octagonal pole with top 60mm(A/F), bottom 130mm (A/F) made up of 3 mm thick plate having a base plate of size 210 x 210 x 12 with single arm 1500mm long bracket arm made up of 48 O.D. pipe with EN 8 grade galvanised foundation bolts and anchor plate on suitable concrete foundation as per standard drawings enclosed herein(Civil & Electrical works shall be paid separately) having fixing arrangement for mounting 2 Nos. of 250W Metal halide luminaries (on opposite sides) item_code_456 EA 8597.76 Excess(+) Full Conversion INR

457 i) S/E of 7 Meter high galvanised Octagonal pole with top 70mm (A/F), bottom 130mm (A/F) made up of 3 mm thick plate having a base plate of size 220 x 220 x 12 with single arm 1500mm long bracket arm made up of 48 O.D. pipe with EN 8 grade galvanised foundation bolts and anchor plate on suitable concrete foundation as per standard drawings enclosed herein(Civil & Electrical works shall be paid separately) having fixing arrangement for mounting 2 Nos. of 250W Metal halide luminaries (on opposite sides) item_code_457 EA Excess(+) Full Conversion INR

458 Supply, fitting, fixing of arm bracket, tubular type, 38mm/50mm dia on pole including painting, all complete. item_code_458

459 ii) S/E Arm " Y " bracket 38/50mm dia on pole, as per specifications and direction of Engineer in charge item_code_459 EA Excess(+) Full Conversion INR

460 Supplying & drawing inside the poles 3 core 2.5 sq.mm PVC insulated flexible copper conductor, fixing of junction box at the pole base (excluding supply of JB), making all connections on both ends, all complete as per specification and direction of Engineer In-charge. item_code_460

461 i) "Y" Pole item_code_461 EA Excess(+) Full Conversion INR

462 ii) "L" Pole item_code_462 EA Excess(+) Full Conversion INR

463 Supply and fixing of 100 W LED (Light Emitting Diode) light fixture with fittings and accessories for Yard lighting purpose having IP66 protection class with Pressure Die Cast LM6/ADC12/LM24 housing and with toughened glass or UV stabilized polycarbonate cover type of approved make or equivalent as per direction of Engineer-in-charge. The LED driver shall have an in-built high voltage cutoff >= 290 V with power factor of complete fitting greater than 0.90. CCT (Correlated Colour temperature) shall be in the range of 5665 K +/- 355 K as per ANSI standard C78.377, CRI (Colour rendering index) should include all colour range from R1 to R15 and > 70 for outdoor luminaire. LED efficacy shall be greater than 140 lumens/watt @ 350mA drive current. The minimum system lumen efficacy of the luminaire shall be 100 Lumens per Watt. The Surge Protection Device (SPD) should be series type with fail safe, surge protection for minimum 3kV shall be provided. Supply of complete fitting with all accessories as per specification attached and as per direction of engineer in charge. Each lot of fittings shall accompany test certificates LM79/ IS:16106 and reference/ batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of minimum 60 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminaire etc. item_code_463 EA Excess(+) Full Conversion INR

464 i) All kinds of Soil item_code_464 M3 Excess(+) Full Conversion INR

465 v) PCC 1 Cement:3 Coarse Sand:6 Graded Stone Aggregate 20mm item_code_465 M3 Excess(+) Full Conversion INR

466 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level item_code_466

467 ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm item_code_467 M3 Excess(+) Full Conversion INR

468 Centering and shuttering including strutting, propping etc. and removal of form for : item_code_468

469 i) Foundations,footings,bases of columns, etc. for mass concrete item_code_469 M2 228.36 Excess(+) Full Conversion INR

470 Supply of Steel reinforcement for R.C.C. including straightening, cutting, bending, placing in position and binding all complete at all levels item_code_470

471 ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786 item_code_471 KG Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information