Repair and Renovation of 100 Seated Girls Hostel Building at Kotpad College (SME Department) of Kotpad NAC

CIVIL WORK

Earth work in excavation of foundation in hard soil in foundation within 50M initially lead and 1.50M initially lifts including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layer not exceeding 0.03Mtr in depth & levelling bed etc complete as directed by the Engineer-in-Charges.

Providing and laying sand in foundation and plinth filling with Sand in 9” thick layers of approved quality free from dust, dirt and other foreign materials to proper line and grade, watering and ramming etc complete with all lead, lifts de-lifts including labour charges with cost, conveyance, tax and royalty of all materials, labour, T&P and other incidental charges etc complete as per direction of Engineer-in-Charges.

Cement Concrete in Proportion (1:4:8) in foundation and floors using 4cm (3/2”) size Clean hard black crusher broken granite metal of approved quality from approved quarry including hosting lowering and laying in layers not exceeding 15cm (6”) thick to the required level, ramming watering and curing etc complete including all cost, conveyance, taxes and royalties of materials and labour with T&P required for the work etc complete.

Cement Concrete in Proportion (1:2:4) foundation and floors using 12mm (1/2”) size Clean hard black crusher broken granite metal of approved quality from approved quarry including hosting lowering and laying in layers not exceeding 15cm (6”) thick to the required level, ramming watering and curing etc complete including all cost, conveyance, taxes and royalties of materials and labour with T&P required for the work etc complete.

Brick Masonry work in cement motor (1:6) by using of Fly Ash Brick having crushing strength not less than 75Kg per Sq. Cm. including splays cutting, circular molding, chamfering and corbelling, watering and curing etc complete as per direction of Engineer-in-Charges - Ground Floor : - Foundation and Plinth

R.C.C. Work of M-20 grade with 20mm and down grade black hard granite crusher broken chips of 150mm cubes at 28days using minimum quality of cement as per clause 003.5 of IRC–21– 1987 and IS–456–1987 with clean crusher broken hard granite chips of 20mm. to 10mm including watering and curing, Centering and Shuttering for R.C.C. Work, Cost, conveyance, tax and royalty of all materials and labour with T&P required for the work etc complete.

Supplying fitting and placing uncoated HYSD Bar reinforcement complete as per drawing and technical specification and placing in proper position as required for R.C.C. Work including cost, conveyance, taxes of Steel and cost of binding wire 18 to 20 gauge and labour with T&P required for the work etc complete in all respect in all floors as per direction of Engineer-in-Charges.

12mm thick Cement Plaster in Cement Mortar (1:6) over brick work after raking out joints cleaning & finishing the plaster surface smooth including watering and curing, Scaffolding screening sand etc complete with cost, conveyance, taxes and royalties of all materials and labour with T&P required for the work etc complete in all respect in all floors as per direction of Engineer-in-Charges. - Ground Floor

12mm thick Cement Plaster in Cement Mortar (1:6) over brick work after raking out joints cleaning & finishing the plaster surface smooth including watering and curing, Scaffolding screening sand etc complete with cost, conveyance, taxes and royalties of all materials and labour with T&P required for the work etc complete in all respect in all floors as per direction of Engineer-in-Charges. - First Floor

16mm thick Cement Plaster in Cement Mortar (1:6) over brick work after raking out joints cleaning & finishing the plaster surface smooth including watering and curing, Scaffolding screening sand etc complete with cost, conveyance, taxes and royalties of all materials and labour with T&P required for the work etc complete in all respect in all floors as per direction of Engineer-in-Charges. - Ground Floor

16mm thick Cement Plaster in Cement Mortar (1:6) over brick work after raking out joints cleaning & finishing the plaster surface smooth including watering and curing, Scaffolding screening sand etc complete with cost, conveyance, taxes and royalties of all materials and labour with T&P required for the work etc complete in all respect in all floors as per direction of Engineer-in-Charges. - First Floor

Providing & fixing of Floor Tiles in floors treads or steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigments to match the shade including rubbing and polishing as per the design & drawing with cost of all materials, labour, conveyance, taxes , T&P etc. complete as per the direction of Engineering -in-charge. - Ground Floor

Providing & fixing of Floor Tiles in floors treads or steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigments to match the shade including rubbing and polishing as per the design & drawing with cost of all materials, labour, conveyance, taxes , T&P etc. complete as per the direction of Engineering -in-charge. - First Floor

Supplying, fitting and fixing in position 6.5-6.7mm thick Wall Tiles in dadoes in all floors at all heights and riser of steps with application of 12 mm thick cement mortar of (1:3) in proper slop and filling the gaps with white cement and colouring the surface with silicon paint finished as per the design & drawing with all cost of materials, labour,conveyance, taxes T&P and complete as per the direction of the Engineer-in-charge. - Ground Floor

Supplying, fitting and fixing in position 6.5-6.7mm thick Wall Tiles in dadoes in all floors at all heights and riser of steps with application of 12 mm thick cement mortar of (1:3) in proper slop and filling the gaps with white cement and colouring the surface with silicon paint finished as per the design & drawing with all cost of materials, labour,conveyance, taxes T&P and complete as per the direction of the Engineer-in-charge. - First Floor

Brick Masonry work in cement motor (1:6) by using of Fly Ash Brick having crushing strength not less than 75Kg per Sq. Cm. including splays cutting, circular molding, chamfering and corbelling, watering and curing etc complete as per direction of Engineer-in-Charges - First Floor :- Superstructure

Supplying fitting and fixing of vitrified tile in floors of size 600mmx600mm of approved make conforming to IS:13755 laid on 210mm thick Cement Mortar (1:4) (1 Cement : 4 Course Sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of Engineer-in-Charge -Ground Floor

Manufacturing and Supplying of M.S. Door, Window, Ventilator and Grill Gate made up all round angular frame size 35x35x5mm, Door and Window angular frame size 25x25x3/5mm with 20 gage C.R. Sheet supporting flat size 25x8mm and 18x5mm including fitting of clamp, hinges, tower bolt, aldrops including all cost, conveyance tax of materials and labour with T&P required for the work etc complete

Supplying and fixing of uPVC Window, size 1200mm x 1200mm of wall thickness 1.2mm ± 0.25mm made out of extruded section plain uPVC sections. The window frame made out of rigid uPVC sections meter cut at 4 corners & joint with plastic fusion welding with internal reinforce required. The shutter section made out of extruded rigid uPVC with internal reinforced with provision of 5mm glaze/wire mesh as per requirement. The window shall be fixed to the wall using 65x100mm long M.S. fasteners at suitable place provided for each vertical and horizontal member etc. complete as per manufacture’s specification and direction of Engineer-in-charge

Painting Two Coats (Plastic Enamel Paint) with any approved shade on New Door and windows over a coat of Primer/Red Oxide Paint including all cost, conveyance, tax of materials and labour with T&P required for the work etc complete. - Ground Floor

Painting Two Coats (Plastic Enamel Paint) with any approved shade on New Door and windows over a coat of Primer/Red Oxide Paint including all cost, conveyance, tax of materials and labour with T&P required for the work etc complete. - First Floor

Providing & Painting with two coats to the entire inside surface with Plastic Emulsion Paint of any approved make to the inner surface with two of Putty after scraping and cleaning the surface over One coat of Water Bound Wall Primer including all cost of materials, scaffolding, labour, watering & curing T&P etc complete as per direction of Engineer-in-charge. - Ground Floor

Supplying fitting and fixing of vitrified tile in floors of size 600mmx600mm of approved make conforming to IS:13755 laid on 210mm thick Cement Mortar (1:4) (1 Cement : 4 Course Sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc. required for the work all complete as per direction of Engineer-in-Charge - First Floor

Providing & Painting with two coats to the entire outside surface with Weather Coat of any approved make to the outer surface after scraping and cleaning the surface over one coat of Water Bound Wall Primer including all cost of materials, scaffolding, labour, watering & curing T&P etc complete as per direction of Engineer-in-charge. - Ground Floor

Providing & Painting with two coats to the entire inside surface with Plastic Emulsion Paint of any approved make to the inner surface with two of Putty after scraping and cleaning the surface over One coat of Water Bound Wall Primer including all cost of materials, scaffolding, labour, watering & curing T&P etc complete as per direction of Engineer-in-charge. - First Floor

Providing & Painting with two coats to the entire outside surface with Weather Coat of any approved make to the outer surface after scraping and cleaning the surface over one coat of Water Bound Wall Primer including all cost of materials, scaffolding, labour, watering & curing T&P etc complete as per direction of Engineer-in-charge. - First Floor

Surface wiring to light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire Finolex/ Polycab/L&T/ Anchor/Havels/V Guard). - Medium Point

Surface wiring to light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire Finolex/ Polycab/L&T/ Anchor/Havels/V Guard). - Short Point

Point wiring for 5/6 amp socket outlet with 2x1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with piano type switch,phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1

Surface wiring to light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire Finolex/ Polycab/L&T/ Anchor/Havels/V Guard). - Long Point

Surface wiring to submain in FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1x1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/ Polycab/Havels/V Guard) - 2x1.50Sqmm PVC Wire

Supply and fixing of following way single pole and neutral, sheet steel, MCB distribution board consumer unit, 240 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic covr for the MCB knobs detachable gland plate, interconnections, hosphatized and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ Isolator) 2 + 4 WAY

Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required

Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting of all sizes complete with all accessories and tube etc. directly on ceiling wall, including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required.

Installation, Testing and Commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required.

x1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required. ( Make of wire Finolex/L&T/Anchor/Polycab/Havels/V Guard)

(B) LED Street Light (Havells)

(C) Shock Proof Tube Light (Havells)

(E) Exhaust Fan

Supplying all materials, labour with T&P for Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc. all complete as per specification.

(D) Ceiling Fan (Havells)

Supplying and Fixing bowl pattern urinal conforming to IS 2556 : Part 6-1996 including connecting the urinal of Angle back 450x375x350 mm with waste fittings as per IS : 2556 sizes respectively with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification.

Surface wiring to submain in FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1x1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/ Polycab/Havels/V Guard) - 2x2.50Sqmm PVC Wire

Providing and fixing on wall face unplasticised-PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including all cost, conveyance of materials and labour with T&P required for the work etc complete as per direction of Engineer in Charge - 110mm dia Door Tee

Providing and fixing on wall face unplasticised-PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including all cost, conveyance of materials and labour with T&P required for the work etc complete as per direction of Engineer in Charge- 110mm dia Bend/Tee

Providing and fixing on wall face unplasticised-PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including all cost, conveyance of materials and labour with T&P required for the work etc complete as per direction of Engineer in Charge- 110mm dia Cowl

Providing and fixing on wall face unplasticised-PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including all cost, conveyance of materials and labour with T&P required for the work etc complete as per direction of Engineer in Charge- 110mm dia Noni Trap

Providing and fixing on wall face unplasticised-PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion including all cost, conveyance of materials and labour with T&P required for the work etc complete as per direction of Engineer in Charge- 110mm dia Socket

Providing and fixing controlled flush, low level cistern [10 litre (full flush) capacity-coloured] made of vitreous china conforming to IS 774-2004 with all fittings complete

Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes - 90mm dia PVC Pipe

Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete. (excluding cost of Earth Work in trenches) 32mm dia PVC Pipe

(Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete. (excluding cost of Earth Work in trenches) - 25mm dia PVC Pipe

Supplying and Fixing wash basins with hole for pillar taps conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification.

Supplying and Fixing of Brass Screw-down Bib Cocks (Taps) polished bright conforming to IS:781-1995 of the following nominal sizes as per specification complete.

Supplying and Fixing of Brass or Gun Metal Full Way Valve conforming to IS:781-1995 of the following nominal sizes with wheel as per specification complete.

Supplying and Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer in charge