Renovation of common toilets and room No. 204 at Hotel Peterhof Shimla (H.P)

Amount

Dismantling tiled floors laid in cement mortar upto floor two level including stacking of serviceable materials in specified manners and including carriage of materials in all leads, lifts as per direction of Engineer incharge For thickness of tiles upto 25mm

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note - item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more

Dismantling of existing chinaware,CP fittings,GI/CI fittings etc. complete and stacking of useful materials in specified diamensions or handing over to site Engineer including carriage of materials in all leads, lifts as per direction of Engineer incharge

Providing and fixing vetrified tiled 8 to 10mm thick heavy duty Rak/ Nitco / Kajaria or equivalent (300x600mm) make of approved shade and quality in skirting, risers of steps and dado laid over 12 mm thick cement mortar 1 :3 (1 cement :3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of materials in all leads, lifts as per direction of Engineer incharge (Basic rate not less than Rs. 60/-)

Providing and fixing 10 mm thick antiskid water proof stain and impact resistant heavy duty vetrified tiles Rak/ Nitco / Kajaria or equivalent 600x600x10 mm manufactured of approved shade and colour in flooring, treads of steps and landing laid over 12 mm thick cement mortar 1 :3 (1 cement :3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete. (Basic rate not less than Rs. 70/-)

Providing and fixing Imported readymade Pine wood 12 mm thick plain lining in ceiling with tongued and groved jointing and screws (frame work to be measured and paid for separately) as per direction of Engineer incharge including carriage of materials in all leads, lifts and heights.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent including carriage of materials in all leads, lifts

Providing bull nose moulding to granite in shelf and tread of staircase complete in all respect in straight portion as per direction of Engineer-In-Charge including carriage of material to all leads and lifts.

Providing and fixing 35mm thick Second class teak wood panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in charge including carriage of material to all leads, lifts and heights.

Providing and fixing 35mm thick 2nd class indian teak wood wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws as directed by the Engineer-in-charge including carriage of material in all leads and lifts

Providing and fixing bright finished brass 100mm. Mortice latch and lock and a pair of levers, handles with necessary screws etc. complete (Godrej or equivelent) as approved by the Engineer-In-charge including carraige all leads and lifts.

Providing and fixing 100mm bright finished brass floor door stopper (heavy duty) as approved by the Engineer-In-charge with rubber cushion screws etc. to suit shutter thickness complete and including all leads and lifts.

Providing and fixing bright finished hard drawn hooks and eyes (heavy duty) and as approved by the Engineer-In-charge including all leads and lifts.

Providing fixing bright finished brass tower bolts (barrel type) with screws etc. complete and as approved by the Engineer-In-charge including all leads and lifts. a) 150x10 mm

Providing and fixing bright finished brass handles (heavy duty) as approved by the Engineer-In-charge with screws etc. complete including all leads and lifts. a) 125mm

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting and as per the direction of the Engineer-In-charge including carraige of all leads, lifts and heights. Readymixed paint brushing wood primer

Painting two coats(excluding coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping and as per the direction of the Engineer-In-charge including carraige of all leads, lifts and heights. With white enamel paint

Polishing two or more coats with malamine polish of required shade on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler and as per the direction of the Engineer-In-charge including carraige of all leads, lifts and heights.

Applying Birla white wall care putty or equivalent over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and ther foreign matters sand papered smooth to give final matter finish to the surface complete and as per the direction of the Engineer-In-charge including carraige of all leads, lifts and heights.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty a required for making the surface and as per the direction of the Engineer-In-charge including carraige of all leads, lifts and heights

Providing and fixing to wall ceiling and floor CPVC pipe Finolex/Supreme/D-plast/ Hindware with fittings and clamps as approved by the Engineer-In-Charge including making good the wall ceiling and floor including carriage of material upto all leads, lifts and heights. 20x15 mm

Providing and fixing CPVC Union Finolex/Supreme/D-plast/ Hindware as approved by the Engineer-In-Charge including carriage of material up to all leads, lifts and heights. 20 mm dia

Providing and fixing PVC pipe finolex make pipe of standred / approved quality complete including carriage of materials within all leads an lifts. 75mm

Providing and fixing PVC pipe finolex make fitting and accessories of standred / approved quality complete including carriage of materials within all leads an lifts. a) Plain bend 75mm dia

b) collar 75mm dia

Providing and fixing vitreous china white wash down water closet wall hung with slim seat cover in white integral “P” or “S” trap including jointing the trap with soil pipe of Kohler make PATIO series Cat No. K18131IN-SO with coneccting accesries pack Cat No. K-1046327-S, Pneumatic in wall tank 3/6 Ltr with half frame Cat No. K-26351IN-P-NA, Pneumatic CP face plate Cat No. 24555IN-P-CP, Rack bolts Cat No. K-1213309-1BLM-0, dual support chair bracket Cat No. K-1225108-0 or equivalent series as per the direction of Engineer-In-Charge of Roka/Grohe/American standard/Cera/Hindware in cement mortar 1:1 (1 cement :1 sand) including carriage of material in all lead and lifts.

Providing and fixing counter top white wash basin Kohler make Forefront series square vessel basin with single faucet hole Cat No. K-75374IN-1-0 or equivalent series as per the direction of Engineer-In-Charge of Roka/Grohe/American standard/Cera/Hindware including cutting holes and making good including carriage of material in all lead and lifts.

Providing and fixing Urinal with sensor Kohler make PATIO Series touch less with rear inlet Cat No. K-16321IN-SS-O or equivalent series as per the direction of Engineer-In-Charge of Roka/Grohe/American standard/Cera/Hindware including carriage of material in all leads and lifts.

Providing and fixing CP Bath showerhead with shower arm and flange Kohler make Cat No. K-16356IN-A-CP or equivalent series as per the direction of Engineer-In-Charge of Roka/Grohe/American standard/Cera/Hindware including carriage of material up to all leads and lifts.

Providing and fixing wall mixer exposed 4-way and shower with diverter for hand shower with hose bracket K-9038IN-CP in polish chrome Kohler make Cat No. K-98754IN-CP or equivalent series as per the direction of Engineer-In-Charge of Roka/Grohe/American standard/Cera/Hindware including carriage of material up to all leads and lifts.

Providing and fixing CP basin mixer Kohler make OBLO series Duo sensor basin faucet Cat No .K-24270In-ND-CP or equivalent series as per the direction of Engineer-In-Charge of Roka/Grohe/American standard/Cera/Hindware including carriage of material upto all leads and lifts.

Providing and fixing CP Bib Tap Kohler make July series Cat No.K-16093IN-4-CP or equivalent series as per the direction of Engineer-In-Charge of Roka/Grohe/American standard/Cera/Hindware including carriage of material upto all leads and lifts.

Providing and fixing 1200mmx600mm bevelled edge mirror of superior glass mounted on 6mm thick bison board or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washer as per the direction of Engineer-In-Charge including carriage of materials within all leads and lifts.

Providing and fixing C.P. brass towel rail complete Kohler make 610mm Cat No. K-5630IN-CP fixed to PVC plugs with C.P. brass screws or equivalent series as per the direction of Engineer-In-Charge of Roka/Grohe/American standard/Cera/Hindware including carriage of materials within all leads and lifts.

Providing and fixing C.P. brass towel rack complete Kohler make 610mm Cat No. K-17529T-CP fixed to PVC plugs with C.P. brass screws or equivalent series as per the direction of Engineer-In-Charge of Roka/Grohe/American standard/Cera/Hindware including carriage of materials within all leads and lifts.

Providing and fixing CP angle Cock Kohler make Cat No.K-11568IN-7B-CP or equivalent series as per the direction of Engineer-In-Charge of Roka/Grohe/American standard/Cera/Hindware including carriage of materials within all leads and lifts.

Providing and fixing CP Toilet Paper Holder Kohler make Cat No. K-5632IN-CP or equivalent series as per the direction of Engineer-In-Charge of Roka/Grohe/American standard/Cera/Hindware including carriage of materials within all leads and lifts.

Providing and fixing liquid soap container with C.P. Brass lid Kohler make Cat No. K-10712D-CP and bracket fixed to wooden plugs with C.P. brass screws or equivalent series as per the direction of Engineer-In-Charge of Roka/Grohe/American standard/Cera/Hindware including carriage of materials within all leads and lifts.

Providing and fixing CP health faucet Kohler make Cat. No. 98100N-0 or equivalent series as per the direction of Engineer-In-Charge of Roka/Grohe/American standard/Cera/Hindware including carriage of materials within all leads and lifts.

Providing and fixing glass shelf with C.P. Brass bracket and guard rail complete Kohler make Cat. No. 5636IN-CP , fixed to wooden plugs with C.P. Brass screws or equivalent series as per the direction of Engineer-In-Charge of Roka/Grohe/American standard/Cera/Hindware including carriage of materials within all leads and lifts.

Providing and fixing CP Soap Dish Kohler make Cat No. K-5634IN-CP or equivalent series as per the direction of Engineer-In-Charge of Roka/Grohe/American standard/Cera/Hindware including carriage of materials within all leads and lifts.

Providing and fixing CP Bottle Trap 350mm for washbasin and sink Kohler make Cat No.K-20746IN-0 and drain wash Cat No. K-75823IN-CP or equivalent series as per the direction of Engineer-In-Charge of Roka/Grohe/American standard/Cera/Hindware including carriage of materials within all leads and lifts.

Providing and fixing C.P. grating chilli make 100 mm dia for floor trap with or without hinges as approved by the Engineer-In-charge including all leads and lifts.

Providing and fixing CP Connection pipe with brass union 45 cm/60cm in length 15 mm nominal bore as approved by the Engineer-In-charge including all leads and lifts.

Providing and fixing CP Towel Ring Kohler make Cat No. K-5631IN-CP or equivalent series as per the direction of Engineer-In-Charge of Roka/Grohe/American standard/Cera/Hindware including carriage of materials within all leads and lifts.

Providing and fixing PVC floor trap of self cleaning design Finolex/Supreme/D-plast/ Hindware with sand cast iron screwed down or hinged grating with or without vent arm complete including cost of cutting and making good the wall and floors including carriage of materials within all leads an lifts. 75mm nominal diametre

SAURABH SHARMA GOVT. CONTT.