MAINT AND REPAIR OF WOODEN AND STEEL FURNITURE AT AFS SAMBRA

Amount

Removing old unserviceable table top of table 3’ x 2’, with/without drawer and S & F 18/19 mm thick pre-laminated particle board exterior grade one side teak finish and other side white lamination including 6 mm thick teak wood edging (liping) and polishing to teak wood edging complete all as directed. DRG NO FD-223/231 /42(M) /224

Removing old unserviceable leg of table 3’ x 2’ with/without drawer after fully dismantling and S & F new leg of first class HW (Teak wood) duly plained and chiseled into the required size and cutting necessary slots / proper shapes for suitable carpentry joints all as directed including polishing the replaced leg of the table complete all as directed. DRG NO FD-223

Removing old unserviceable long rail of table 3’ x 2’ after fully dismantling and S & F new long rail of first class HW (teak wood), duly plained and chiseled into the required size and cutting necessary slots / proper shapes for suitable carpentry joints all as directed including polishing the replaced rail of the table complete. DRG NO FD-223

Removing old un-serviceable short rail of table 3’ x 2’ and S & F new short rail of first class HW (Teak wood) duly plained and chiseled into the required size and cutting necessary slots / proper shapes for suitable carpentry joints all as directed including polishing the replaced rail of the table complete all as directed. DRG NO FD-223

M & L First class HW (Teak wood) cross brackets of size 100 x 100 x 25 mm thick long teak wood fixed with MS screws including polishing complete all as directed. DRG NO FD-223/224

Dismantling / removing the old unserviceable table top of table dining 8 persons type and S & F 18/19 mm thick three layered flat press teak wood pre-laminated particle board exterior grade one side teak finish and other side white lamination cut into suitable size of 1200 mm x 1800 mm including 6 mm thick teak wood edging and polishing to teak wood edging all as directed. DRG NO FD-376

Removing old unserviceable leg of table dining 8 persons after fully dismantling and S & F new leg of first class HW (Teak wood) duly plained and chiseled into the required and cutting necessary slots / proper shapes for suitable carpentry joints all as directed including polishing the replaced leg of the table complete all as directed. DRG NO FD-376

Removing old unserviceable long rail of table dining 8 persons after fully dismantling and S & F new long rail of first class HW (teak wood) duly plained and chiseled into the required size and cutting necessary slots / proper shapes for suitable carpentry joints all as directed including polishing the replaced long rail of the table complete all as directed . DRG NO FD-376

Removing old unserviceable short rail of table dining 8 persons after fully dismantling and S & F new short rail of first class HW (teak wood) duly plained and chiseled into the required size and cutting necessary slots / proper shapes for suitable carpentry joints all as directed including polishing the replaced short rail of the table complete. DRG NO FD-376

Removing old unserviceable table top of table peg and S & F new table top of peg table made by 18/19mm thick prelaminated particle board exterior grade one side teak finish and other side white lamination including 6mm thick teak wood edging and polishing to teak wood edging complete all asper drg and specification . DRG NO FD-384

Removing old unserviceable leg of table Peg after fully dismantling and S & F new leg of first class HW (Teak wood) duly plained and chiseled into the required size and cutting necessary slots / proper shapes for suitable carpentry joints all as directed including polishing the table complete. DRG NO FD-384

Removing old unserviceable side rails of table peg and S & F new side rail of first class HW (Teak wood) duly plained and chiseled into the required size and cutting necessary slots / proper shapes for suitable carpentry joints all as directed including polishing the side rail. DRG NO FD-384

Removing old unserviceable table top of table center and S & F new table top of table center made by 18/19mm thick prelaminated particle board exterior grade one side teak finish and other side white lamination including 6mm thick teak wood edging and polishing to teak wood edging complete all asper drg and specification . DRG NO FD-235

Removing old unserviceable leg of table centre after fully dismantling and S & F new leg of first class HW (Teak wood) duly plained and chiseled into the required size and cutting necessary slots / proper shapes for suitable carpentry joints all as directed including polishing the table complete. DRG NO FD-235

Removing old unserviceable side rails of table centre and S & F new side rail of first class HW (Teak wood) duly plained and chiseled into the required size and cutting necessary slots / proper shapes for suitable carpentry joints all as directed including polishing the side rail. DRG NO FD-235

Removing old unserviceable table top of table writing and S & F new table top of table writing made by 18/19mm thick prelaminated particle board exterior grade one side teak finish and other side white lamination including 6mm thick teak wood edging and polishing to teak wood edging complete all asper drg and specification . DRG NO FD-375

Removing old unserviceable leg of table writing with drawer after fully dismantling and S & F new leg of first class hardwood(Teakwood) duly plained & chiselled into the required size and cutting necessary slots/proper shapes for suitable capentry joints including polishing complete all asper drg and specification . DRG NO FD-375

Removing old unserviceable long rail of table writing after fully dismantling and S & F new long rail of first class hardwood (Teakwood) duly plained & chiselled into the required size and cutting necessary slots/proper shapes for suitable capentry joints including polishing complete all asper drg and specification . DRG NO FD-375

Removing old unserviceable short rail of table writing after fully dismantling and S & F new short rail of first class hardwood (Teakwood) duly plained & chiselled into the required size and cutting necessary slots/proper shapes for suitable capentry joints including polishing complete all asper drg and specification . DRG NO FD-375

M & L First class HW (Teak wood) cross brackets of size 100 x 100 x 25 mm teak wood fixed with MS screws including polishing complete all as directed. DRG NO FD-375

Removing old unserviceable top of Teapoy and S & F new top of Teapoy made by 18/19mm thick prelaminated particle board exterior grade one side teak finish and other side white lamination including 6mm thick teak wood edging and polishing to teak wood edging complete all asper drg and specification . DRG NO FD-382

Removing old unserviceable leg of Teapoy after fully dismantling and S & F new leg of first class HW (Teak wood) duly plained and chiseled into the required size and cutting necessary slots / proper shapes for suitable carpentry joints all as directed including polishing the leg complete. DRG NO FD-382

Removing old unserviceable side rails of Teapoy and S & F new side rail of first class HW (Teak wood) duly plained and chiseled into the required size and cutting necessary slots / proper shapes for suitable carpentry joints all as directed including polishing the side rail. DRG NO FD-382

Removing old unserviceable table top of table dining 3’ x 3’ & S & F 18/19 mm thick pre-laminated particle board exterior grade one side teak finish and other side white lamination including 6 mm thick teak wood edging (liping) and polishing to teak wood edging & polishing complete all as directed. DRG NO FD-1009

Removing old unserviceable table top of table dining 3’ x 3’ & S & F 18/19 mm thick pre-laminated particle board exterior grade one side teak finish and other side white lamination including 6 mm thick teak wood edging (liping) and polishing to teak wood edging & polishing complete all as directed. DRG NO FD-88

Removing old unserviceable leg 760x75x75mm of Table dinning 3'x3' after fully dismantling and S & F new leg of first class HW (Teak wood) duly plained and chiseled into the required size and cutting necessary slots / proper shapes for suitable carpentry joints all as directed including polishing the leg of table complete. DRG NO FD-88

Removing old unserviceable side rail of Table dinning 3'x3' after fully dismantling and S & F new side rail 850x75x25mm of first class HW (Teak wood) duly plained and chiseled into the required size and cutting necessary slots / proper shapes for suitable carpentry joints all as directed including polishing the leg of table complete. DRG NO FD-88

Removing old unserviceable table top of table dining ORs and S&F 18/19mm thick prelaminated particle board exterior grade one side teak finished and other side white lamination including 6 mm thick teak wood edging, polishing the edging and painting the MS tube frame all as directed. DRG NO FD-165(M)

Removing old un-serviceable table top of table dining 6 persons all as directed. DRG NO FD-273

Removing old unserviceable table top of Table office officers steel and S&F 18/19mm thick prelaminated particle board exterior grade one side teak finished and other side white lamination including 6 mm thick teak wood edging, polishing th edging all as directed. DRG NO FD-1002/FD-84(M)

Removing old unserviceable table top of Table office clerks steel and S & F 18/19mm thick prelaminated particle board exterior grade one side teak finished and other side white lamination including 6 mm thick teak wood edging, polishing th edging all as directed. DRG NO FD-89(M) FD-1004

Removing old unserviceable table top of Table typist steel and S & F 18/19mm thick prelaminated particle board exterior grade one side teak finished and other side white lamination including 6 mm thick teak wood edging, polishing th edging all as directed. DRG NO FD-1005

Removing the existing unserviceable drawer of Table office officers steel and duly fabricated supply and fix new drawer made out of 1.6mm MS sheet including painting with two coats of synthetic enamel paint over a coat of redoxide primer all as directed. DRG NO FD-89(M)/FD-1002

Removing the existng unserviceable drawer of Table office clerks steel and duly fabricated supply and fix new drawer made out of 1.6mm MS sheet including painting with two coats of synthetic enamel paint over a coat of redoxide primer all as directed. DRG NO FD-1004/FD-84(M)

Removing the existng unserviceable drawer of Table typist steel and duly fabricated supply and fix new drawer made out of 1.6mm MS sheet including painting with two coats of synthetic enamel paint over a coat of redoxide primer all as directed. DRG NO FD-1005

Repairing the metal part of table steel any type by tinkering , welding the dismantled out portion and refixing the same by means of elelctric arc welding all as directed. DRG NO FD-89(M)/ FD-84(M)/ FD-1005

Supply and replace hard rubber / PVC bush 32mm size to the legs of the tables all as directed. DRG NO FD-89(M)/ FD-84(M) /FD-1005

M&L for Removing from existing GI charpoy, broken unserviceable GI elbow 32 mm 3 way carefully without damaging the threads, supply and fix new GI elbow 32 mm 3 way (ISI Marked) to GI charpoy complete all as directed. DRG NO FD- 220 Note: If any thread in leg, short rail or long rail found damaged, the same shall be rethreaded and the cost of the same is deemed to be included in the quoted rate.

M&L for Removing from existing GI charpoy, broken unserviceable check nut 32 mm carefully without damaging the threads and supply and fix new check nut 32mm dia to the GI charpoy complete all as directed. DRG NO FD- 220.

M&L Cutting out from existing GI charpoy, serviceable part of the unserviceable long rail to convert it in to short rail made out of 32mm GI pipe including threading as required & assembling all as directed. DRG NO FD- 220.

M&L for Cutting out from existing GI charpoy, serviceable part of the unserviceable short rail to convert it in to legs made out of 32mm GI pipe including threading as required and plugging one side of the leg by welding suitable MS flat bottom plug and assembling the GI charpoy all as directed DRG NO FD- 220. Note : cost of Unserviceable leg shall be measured under Sch of credit.

M&L for New long rail made of 32 mm dia GI pipe Medium grade 1.80 m long ISI Marked including threading both sides as required and assembling the GI charpoy including removing unserviceable long rail all as directed. DRG NO FD-220.

M&L for New short rail made of 32 mm dia GI pipe Medium grade 0.9 m long ISI Marked including threading both sides as required and assembling the GI charpoy all as directed. DRG NO FD-220. Note : Cost of removal of long rail shall be measured under item No. 04

SARGAM ENTERPRISES

KASTURILAL HARICHAND OHRI AND SONS

M/s. SHRI SAINATH ENTERPRISES