Construction of Multipurpose Utility Complex at Dibrugarh under CIDF

Amount

Providing cast in-situ manually driven reinforced cement concrete piles of using required grade of cement concrete of required bore-diameter, bulb diameter, lengths and with reinforcement as per specifications and drawings. Reinforcement to be measured and paid seperately as per item no. 21.4.1 C) UNIFORM PILE d) Pile Dia 400 mm i) Upto 10 M

Extra for using admixture & plasticiser (a) RCC grade M20 iv) Pile Dia 400 mm

Extra for boring specified diameter pile in high sub-soil water level requiring use of drilling mud and extra cement (iii) 400 mm dia

Empty boring for specified diameter piles from ground level to cut-off level. d) Pile Dia 400 mm

Supplying, fitting and fixing in position reinforcement bars conforming to relevent IS code, for reinforced cement concrete works in piles including straightening, cleaning, cutting and bending to proper shapes and length as per specifications and drawings. The rings should be welded with vertical reinforcements as per specified IS codes of practice. (Inclusive of lap length, hook, chair, bend, anchor...etc) (A) TMT bar made of Primary producer (From Primary producer)

Routine test for test loading to 1.5 times the specified safe working load including construction of any test pile cap and dismantling the same after completion of test. (Rate for Safe working Load)

Initial test for test loading to 2 times the specified safe working load including construction of any test pile cap and dismantling the same after completion of test. (Rate for Safe working Load)

Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. (A) Up to a depth of 2.00m below the existing ground level. (a) In ordinary soil

(B) Extra over item no.1.1(A) above for each 1m depth or part thereof beyond the initial depth of 2m

Shuttering and shoring the earth at different levels in foundations where necessary with required prop, struts, planks, timbers, nails etc. including dewatering if necessary, complete as directed and specified (measurement to be taken in the face area timbered) (b) Above 1.5 m upto 3.00 m depth

Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading.

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). (a) In prop 1cement: 3 sand :6 coarse aggregate by volume

Providing and laying 25mm thick damp proof course with cement concrete in prop 1:1.5:3 with graded stone agg. of 10mm down nominal size including providing approved damp proof admixture in proportion as recommended by the manufacturer including curing etc. complete as directed.

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using mixture machine (A) In sub - structure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using mixture machine (B) In super structure from plinth level up to 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using mixture machine (B) In super structure from plinth level up to 1st floor level. i) Walls (thickness not less than 100mm) including attached pillasters, buttresses, plinth and string course etc. N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using mixture machine (B) In super structure from plinth level up to 1st floor level. iii) Vertical and horizontal fins (thickness not more than 100mm) individually or forming box louvre and projected band. N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using mixture machine (B) In super structure from plinth level up to 1st floor level. iiv) On domes, vaults and shell roof N) Without using admixture, plasticiser b) M20 grade concrete or Prop. 1:1.5:3

Extra over item Nos. 2.2.1 (I) (B), above for each subsequent floor or part thereof above the 1st floor level.

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using mixture machine (A) In sub - structure up to plinth level Foundation, footing, columns with base tie and plinth beam, pile cap, base slab, retaining walls, walls of septic tank, inspection pit and the like and other works not less than 100mm thick up to plinth level. N) Without using admixture, plasticiser a) M15 grade concrete or Prop. 1:2:4

Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) (I) Using mixture machine (B) In super structure from plinth level up to 1st floor level. ii) Columns, pillars, posts, struts, suspended floor, roof, landing, shelf and support, balcony, lintel, sill band, beam, girder, bressumer, cantilever, staircase (except spiral staircase and landing ) including preparing the top surface and finishing of nosing. N) Without using admixture, plasticiser a) M15 grade concrete or Prop. 1:2:4

Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Foundation, footings, bases of columns, pile cap, raft and mass concrete works etc. (b) Using 25mm thick plank

Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: Columns, Pillars, Posts & Strut of square/ rectangular/ polygonal in plan or any shape like Tee/L etc. having plane vertical face

Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties. (a) For depth not exceeding 1.0M.

Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. (a) Floors etc. upto 200mm in thickness.

Vertical surface such as walls (any thickness), parapet walls, partitions and the like including attached pilasters, butresses, plinth and string courses and the like.

Staircase with sloping or stepped soffits including risers and stringers but excluding Landing.

Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. (a).Brick on flat soling.

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (c) In proportion 1:5.

1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) (A) 112mm thick brick wall (a) In cement mortar in proportion 1:4. (1 cement:4 sand)

Extra for brick walling for each subsequent floor or part thereof above the 1st floor level. (a) 112mm thick brick/ R.B wall

Cement concrete works in topping 1:1:2 (1cement :1sand :2 graded aggregates on R.C.C floor, tread and rise of steps finished with a floating coat of neat cement using cement slurry for bond @ 2.75 kg.of cement per sq. m. of floor to be laid in panels including curing complete as directed. (b) 20 mm thick

65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 25mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg. per square metre of floor area) including curing etc. complete as directed.

Providing polished ceramic floor tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). a) Normal range Somany/ Orient/Nitco/Asian Make ii) Of size 400mmx400mm and above

Providing polished ceramic wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey / Sika / Pedelite / Rouf) /white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (Cement plastering to be measured and paid separately). (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department). (Walls means both interior and exterior walls). a) Normal range Somany/ Orient/Nitco/Asian Make ii) Of size 200mmx300mm and above

Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) a) Normal range Somany/ Orient/Nitco /Varmora/VITA/ Marbito/ Make ii) Of size 600mmx600mm and above

18 mm thick Marble stone slab flooring of sizes 1200x1200 including treads and risers of steps, skirting, laid over 20 mm thick base of cement plaster 1:6 (1 cement : 6 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with marble slab of specified quality and shade at all levels. III) Kumari Slab

Providing polished granite tiles of approved quality, size and shape and thickness not less than 8mm, on walls over 15mm thick, cement mortar bed in prop. 1:3 (1 cement : 3 coarse sand) including cutting where necessary, finished with flush pointing on wall with ordinary cement slurry mixed with approved pigment to match shade of tiles, complete at all levels as specified and directed.

10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed. b) In cement mortar 1:4

15 mm thick Cement plaster in single coat on single or half brick wall for interior plastering up to 1st floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. B) On fair side b) In cement mortar 1:4

20 mm thick Cement plaster in two coats on single or half brick walls for interior plastering up to 1st floor level including arises, internal rounded angles,chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. A) On rough side (backing coat 15 mm and finishing coat 5mm thick) (b). In cement mortar 1:4

Extra over item no 6.2.1 to 6.2.3 for plastering on celling and soffits of stairs up to 1st floor level (instead of plastering on walls) including curing complete as directed.

Extra over item no 6.2.1to 6.2.3 for interior plastering above 1st floor level for every addl floor or part thereof including curing complete as directed. .b) On two coat plaster

Extra over item no 6.2.1 to 6.2.3 for exterior plastering over wall for every addl floor or part thereof beyond 1st floor level including curing complete as directed. b) On two coat plaster

Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) (Dyna roof /Sathyam/ Durakolor/Century Wells) at all levels including fitting and fixing self drilling, self tapping screws complete complete. (iv) 0.60 mm thick.

Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) (Dyna roof / Sathyam/ Durakolor/ Century Wells) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) (iv) 0.60 mm thick

Providing corrugated 1.20 mm thick transparent fibre sheet roofing including fitting and fixing necessary galvanised J or L hooks, bolts and nuts of 8 mm dia with bitumen washer 25 mm dia. X 3 mm thick and 1.6 mm thick limpet washer complete excluding cost of roof truss, purlins etc. (Roof trusses, purlin, etc. to be measured and paid separately).

Grading roof for water proofing treatment with (a) 1:2:4 (Cement : 2 Coarse sand : 4 graded stone agg.20mm nominal size)

Providing and laying machine made clay roof tiles on sloping roof and chhajjas over 20mm thick base of cement mortar 1:3 and jointed with grey cement slurry and joints flush with mortar 1:3 complete.

Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. (a) With sal wood

Providing and fixing flush door shutters solid core construction with frame of 1st class hard wood with cross band and face veneered ply wood face panels conforming to relevent I.S code including oxidised iron butt hinges (100mm x 75mm x 3.5mm) 6 nos with necessary wood screws. a) Decorative type face panel and block board core. (ii) 35 mm thick .

Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. I . Plain grill (c) Fixed to Brickwork/P.C.C/R.C.C.

Providing, fitting and fixing anodised aluminium sliding windows and ventilators of standard sections of approved brand without horizontal glazing bars, joints mitred and welded (manufactured to relevant IS specifications) and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels. (a)2 Track sliding window (i)6mm frosted glass

Providing, fitting and fixing Aluminium curtain wall on the exterior face of the building fitting to concrete member by drilling hole fixing by brass screw fabricated with anodised aluminium section of approved brand (Hindalco/Nalco/Balco/Jindal or other primary producer) of size 101x44.50mm by providing aluminium joining angles including providing aluminium angles providing 6mm thick colored reflectory type glass fitted with aluminum at all levels.

Supplying and installing uPVC- Sliding Windows made out of Lead free green profile having "GREENLINE" mark of BIS standard uPVC multichambered sections of wall thickness 2.4mm with corners fusion welded, fully reinforced with Galvanized steel 1.5/2mm including interlock profile, glazing bead, grooving bead, brush seal, aluminum sliding track, stainless steel rollers, sealing wedge block, Espag, int handle, pop up handle, keeper, drain cap, fisher screws, packing pieces with all necessary stainlessness screws etc. complete as directed. The windows must be installed complete with all kinds of ironmongery including EPDM gaskets, bridging wedges and glass packers and with suitable water draining system. Application of silicon sealant from inside / outside of Dowcorning / GE or equivalent. With 5mm clear glass (a) 2 Track Sliding Window with Flyscreen using uPVC section of sizes 88mm x 50 mm x 2.4mm thick wall for frame with inbuilt flyscreen track, 37mm x 61mm x 2.4mm thick wall for glass sash, 25mm x 49mm x 2.4mm thick wall for flyscreen sash having 1.5mm thick reinforcement, Interlock: 43mm x 23mm (Glass Panel) (WINSTA KOMMERLING/ FINESTA/ ENCRAFT) (i) 2-Panel with 5mm clear float glass

Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) (i) Thickness = 1.5 mm thick

Wall painting (two coats) with plastic paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth (a).Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

Finishing wall with water proofing weather coat smooth antifungal exterior painting of approved make of Dulux paint / Nerolac paints of required shade after cleaning and clearing the surface etc i/c scafolding complete as directed at all levels two coats.

Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. (b). With ready mixed paint , wood primer (white).

Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. a). With ready mixed "red-lead/ red oxide" primer.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (i).Surfaces over 100mm in width or girth. b). High gloss (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

Varnishing two coats (excluding priming coat) on new wood and wood based surfaces under coating with flatting varnish and finishing coat with copal varnish or spar varnish to give an even surface including cleaning the surface of all dirt,dust and filling the knots,crack etc with specially made wood putty and sand papering so as to produce a smooth,dry and matt surface. (i).Surfaces over 100mm in width or girth.

Polishing with french sprit polishing on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust sand papered smooth and including a coat of wood filter

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) a) Sliding door bolts ii) 250mm x 16mm

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) b) Tower bolts ii) 250mm x 12mm

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) c) Door handles iii) 150mm

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) t) Door stopper with rubber stopper

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) m) Mortice lock vertical type i) 65mm (Godrej with handle (2-lever)

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) l) Hydraulic door closure

Supplying, fitting and fixing MAC blinds horizontal and vertical complete as specified and directed by the department at all levels. (A) Vertical blinds (a) Regular iv) 50 mm

Supplying, fitting and fixing double leaf heavy duty iron gate, frame made from 50mm x 6mm M.S. flat iron with another horizontal flat at the middle, 20mm dia M.S bars at 200mm apart from bottom flat to top flat and 20 mm dia M.S. bars at 200mm apart from bottom flat to middle flat including drilling, welding etc. complete. All vertical bars are to be protruded at least 100mm above the middle and top flat is to be flattended and pointed as directed. Necessary locking arrangement on both faces, arrangement for temporary closing the gate and 2 nos.( minium) strong iron hinges of M.S bars and flat of same sizes on each leaf to be embeded in C.C brick pillars as necessary including a red oxide painting to all iron works as directed and specified. (Separate payment will be made for posts).

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) a) From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL (i) TMT Corrosion resistant steel (CRS) reiforcement bar

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) b) Other ISI approved TMT reinforcement bar (SAI/BISCON/THERMAX) (For Assam Type Bldg., drain works,,retaining wall&boundary wall etc. .

Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) c) ISI approved Mild steel reinforcement bar(M.S.Bar)

Providing, fitting, hoisting and fixing of roof trusses fabricated using any one or combination of following sections of (i) square section (ii) Rectangular Hollow section of specification SHS/RHS and including purlins, bottom runners and providing M.S. cleat, M.S. angle base plank, bolts and nuts with red oxide primer including fitting bottom runner and cleat etc. for fixing ceiling joist as per design complete as directed as per specifications. (a) Using TATA make RHS/SHS of grade 310

Providing and fixing rolling shutters of approved make made of 80mm wide MS laths interlocked together through their entire length and jointed together at the ends by endlocks mounted on especially designed pipe shaft with bracket plates, guide channels and arrangements for inside and outside locking with push -pull operation complete including cost of wire, spring and hood cover for the shutters.

Providing fitting and fixing Godrej SS304 grade railing with pipes/ glass for different staircase, cutout areas, balcony, etc with complete instalation. Acrylic finish, etc which is fitted with mid pipes and top pipes of good quality steel. Moreover, depending on the requirement glass panels can also be fitted on specific railings. Good quality screws are provided for fixing up the railings. (b) SS Railing Steel with Glass Balustrades Holder Sideways

Providing drain with cement concrete (1:3:6) 10cm thick sides 10cm thick bed over brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified .ii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm.

Providing plinth protection with bricks flat laid in cement mortar 1: 4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish.

Pre construction anti - termite treatment by applying in the entire levelled area after plinth filling and before laying floor by applying the emulsion @ 5 (five) litres per square meter of the surface to be spread with light rodding so as to ensure proper absorption by the filled up earth (supplying of necessary tools and accessories by the contractor) as per the direction of the Department complete. a) with aqueous emulsion having concentration 1:19 with chloropirophose solution (tricel or euivalent) and water, i.e. 1% solution.

Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI mark and CO2 cartridge will be confirming to IS: 4947 with ISI mark, Powder will be confirming to IS: 4308 with ISI Mark (5 KG) BRAND : FIRESTOP / FIREND / FIRE SHIELD/GETECH/MINIMEX

Supply, erection, testing and commissioning of FIRE FIGHTING SYSTEM WITH SPRINKLER SYSTEM complete as per drawings and as per direction of concerned Executive Engineer. (detailed Bill of quantities along with quatotions will be made separtely before tender).

Providing and fixing 75x25mm teakwood plank flooring with tongue and groove joints (concealed scewing and minimum length 1.5m) on two layers of 12mm thick water proof ply plywood bonded with phanolic resin (kitply or approved equaivalent) with joints staggered with 2nd layer glued and screwed to the first, fixed to teakwood joists framework comprising 75x75mm teakwood joist 900c/c in one direction and 50x50mm teak wood battens 400mm c/c on other direction, teakwood joists resiliently supported on 150x150mm pads 0f 7.5mm thickness of wafle , neoprene pad ibbed resistoflex pads (50 psi garde) over support locations with necessary brass screws including providing and applying a coar of ready mixed aluminium primer and a coat of systhetic enamael paint both of approved brand and manufacturer over unexposed surfaces and edges of marine ply. Entire work to be done complete as per drawings, specifications and direction of architect / engineer in charge including wax polishing of teak wood planks.

Providing, supplying, mixing and coving the edges along joint of parapet wall & roof slab/ chajja & exterior wall/ walls & raft slabs etc. with cement sand mortar (prop.1:4) mixed with mortar modifier cum bonding agent Nitobond SBR of Fosroc Chemicals/Rheomix 141 of BASF/Dr. Sealkit Masterbond Latex (Asian Chemicals) @ 2-3Ltrs per bag of cement as specified & directed by the Department complete.

RAISING LOW SITE with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified. (b) Other than Guwahati city

PAVERS Providing SUN ROCK HIGH CTS / DEVI paver block / tiles of concrete grade M30 or above of approved quality, size, shape of specified thickness over a levelling bedding layer of 30mm compacted sand over a base course of WBM or PCC including cutting where necessary finished with spreading sweeping jointing sand and compacting the pavers using vibrating compactor as specified and directed. SUN ROCK HIGH CTS / DEVI PAVER TILES (B) 60mm thick

ROAD NETWORK BY ICBP Providing and laying of inter locking concrete block pavement (ICBP) with cement concrete paver blocks as per IS 15658-2006 of thickness 80mm and 28 days compressive strength not less than 30N/m over a layer of bedding sand of compacted thickness 30mm, laid either in stretcher /running/herringbone pattern of bonds as directed by the engineer and in proper level and grade and compacted with approrpiate equipment such as plat vibrator along with spreading of a thin layer of joint filling sand to fill up the gaps between blocks including construction of edge restraint wherever required complete as per drawings and technical specification clause 1504 of MORD.

TREE PLANTING Supplying and planting of ornamental trees (1' - 0" height sapling) including pit making (60 cm x 60 cm x 60 cm), filling the pit with appropriate soil media, manure and fertilizers as per specification and necessary maintenance for a period of one year from the date of planting complete as specified and directed. SHADE TREE (A) Neem / mahaneem / Beef wood / Bakul / Acacia / Siris / Devils tree / Kadam / Palash / Pink Cassia / Peepal / Silver oak / Simalu / Ajar

LAWN MAKING BY TURFING Supplying and laying of slecetd grass turves (size 60cm x 30cm) after preparing the land by removing of all unwanted debrishes (rubbles, pebbles, plant roots etc) mixing of organic manure, levelling the surface and initial maintenance by proper and periodic rolling, mowing and irrigation etc. for a period of six months from the date of laying of grass including the application of recommneded dose of fertilizers mixture as specified and directed by the department. (b) by Carpet grass (Axonopus affinis) :

Providing fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately) Indian type W.C Orissa pattern of size 580 x 440 mm a) White ii) Hindware make

Providing fitting and fixing Vitreous china wall hang water closet (European type W.C pan 400mm high) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) a) Parryware make (iii) Cube walvit pan set (cat. No. C844C)

Supplying, fiting and fixing PVC flushing cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) i) Paryware make a) White (i) Economy single flush (cat no. C8090/C8055)

Providing fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. (A) Parryware Make (a) White (ii) Aquaseal (Cat. No.C0508)

Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) PEDESTAL BASIN (with pedestal) (A) Parryware Make (a) White (iii) Qube 600x460 (Cat. No.C844 D/G) (white/coloured)

Providing fitting and fixing Decorative Mirror complete as directed and specified. (A) Parryware Make (b) Size 600mm x 450mm

Providing, fitting and fixing recessed soap tray / soap dish complete as directed and specified. (a) Parryware Make (i) Recess SP & SG dish (Cat.No. C9935)

Providing, fitting and fixing CP towel rail complete as directed and specified. (b) Sona make (i) Towel rail Diplomat 300mm long (Cat.No.TR-0605)

Providing, fitting and fixing Chrome Plated TOILET PAPER holder complete as directed and specified. (a) Jaquar make (i) Continental toilet paper holder (Cat.No. ACN-1151N)

Providing, fitting and fixing Chrome Plated waste coupling complete as directed and specified. (a) Jaquar Make (i) 32mm (HT/FT) (Cat.No.ALD-705 / 709)

Providing, fitting and fixing Chrome Plated bottle trap complete as directed and specified. (a) Jaquar make (i) Bottle trap (with internal partition) 32mm size with 250mm long wall connection pipe (Cat.No. ALD-769)

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (i) 160mm dia.

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia.

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (iii) 90mm dia.

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (iv) 75mm dia.

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (v) 63 mm dia.

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (vi) 50mm dia

Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia.

Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (iv) 75 mm dia.

Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia.

Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (iv) 75 mm dia.

Supplying fiting and fixing 45degree PVC bend of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia.

Supplying fiting and fixing 45degree PVC bend of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (iv) 75 mm dia.

Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (iv) 75 mm dia.

Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (v) 50mm dia

Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (iv) 75 mm dia.

Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (v) 50mm dia

Supplying fiting and fixing PVC double ‘Y’ plain of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (i) 110mm dia.

Supplying fiting and fixing PVC double ‘Y’ plain of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 75 mm dia.

Supplying fiting and fixing PVC double ‘Y’ with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (i) 110mm dia.

Supplying fiting and fixing PVC double ‘Y’ with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 75 mm dia.

Providing fitting and fixing PVC cowel of ISI make complete as directed and specified. (ii) 110mm dia. PVC cowel of ISI make

Providing fiting & fixing (300x230)mm C.I. yard gully hinged Grating complete as directed and specified.

C.P. Grating (ii) 110mm dia

Providing fitting and fixing 450mm dia. 90mm thick C.I. Man hole cover and frame of 58 Kg. weight complete as directed and specified.

Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table.

Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed.

Supplying fitting and fixing Ajoy Flowguard CPVC (Chlorinated Polyvinyl Chloride) pipes having thermal stability for hot and cold water supply including all CPVC plain and bruss threaded fitting including clamps at 1.00 m spacing including joining of pipes and fitting with one step CPVC solvent cement and testing of joints complete at all levels as directed and specified. (Note: Ball valve and union will be charged extra and does not comes under Accessories) (i) In internal wall - exposed on wall (b) 20 mm OD

Supplying fitting and fixing Ajoy Flowguard CPVC (Chlorinated Polyvinyl Chloride) pipes having thermal stability for hot and cold water supply including all CPVC plain and bruss threaded fitting including clamps at 1.00 m spacing including joining of pipes and fitting with one step CPVC solvent cement and testing of joints complete at all levels as directed and specified. (Note: Ball valve and union will be charged extra and does not comes under Accessories) (i) In internal wall - exposed on wall (c) 25 mm OD

Supplying fitting and fixing Ajoy Flowguard CPVC (Chlorinated Polyvinyl Chloride) pipes having thermal stability for hot and cold water supply including all CPVC plain and bruss threaded fitting including clamps at 1.00 m spacing including joining of pipes and fitting with one step CPVC solvent cement and testing of joints complete at all levels as directed and specified. (Note: Ball valve and union will be charged extra and does not comes under Accessories) (i) In internal wall - exposed on wall (d) 32 mm OD

Supplying fitting and fixing Ajoy Flowguard CPVC (Chlorinated Polyvinyl Chloride) pipes having thermal stability for hot and cold water supply including all CPVC plain and bruss threaded fitting including clamps at 1.00 m spacing including joining of pipes and fitting with one step CPVC solvent cement and testing of joints complete at all levels as directed and specified. (Note: Ball valve and union will be charged extra and does not comes under Accessories) (i) In internal wall - exposed on wall (e) 40 mm OD

Supplying fitting and fixing Ajoy Flowguard CPVC (Chlorinated Polyvinyl Chloride) pipes having thermal stability for hot and cold water supply including all CPVC plain and bruss threaded fitting including clamps at 1.00 m spacing including joining of pipes and fitting with one step CPVC solvent cement and testing of joints complete at all levels as directed and specified. (Note: Ball valve and union will be charged extra and does not comes under Accessories) (i) In internal wall - exposed on wall (f) 50 mm OD

Supplying fitting and fixing approved uPVC Pipes of different sizes, with all necessary 'R' brand or similar approved uP.V.C. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, clamps etc. complete at all levels including below G.L. as directed and specified. (B) Concealed by chieselling or breaking brick wall/ C.C. wall/ R.C.C. wall and making good to the damaged structure. SUPREME/ PRINCE / SFMC / FUSION BAND or other equvalent approved brand (High presure pipe Sch-40) d) 25 mm dia

Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand as directed and specified. (G.I. & C.P pipes will be measured separately) Lauret brand (i) Bib Cock(Regular) Cat.No.LJK 1102 R

Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand as directed and specified. (G.I. & C.P pipes will be measured separately) Lauret brand (ii) Bib Cock with foamflow with wall flange Cat.No.LJK 1102

Supplying fitting and fixing stop-cock of approved brand of size as mentioned below and directed and specified (G.I. & C.P. pipes will be measured and paid separately) I) Brass stop cock (heavy) of Sant make (ii)20mm dia

Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) Jaquar (a) Continental / Clarion (i)15mm dia Male / Female (long thread)

Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) Jaquar (a) Continental / Clarion (ii)15mm dia( Angular stop cock )

Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) Jaquar (a) Continental / Clarion (ii) 15mm dia( Angular stop cock with long thread )

Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. Jaguar make (b)Long neck with areator

Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed. b) 40 mm dia.

B) uPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe) iii) 25mm diameter

B) uPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe) iv) 32 mm diameter

B) uPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe) v) 40 mm diameter

C) CPVC pipe with CPVC fittings (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe) iii) 25mm (OD) diameter

C) CPVC pipe with CPVC fittings (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe) v) 40 mm (OD) diameter

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed B) uPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe) iii) 25mm diameter

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed B) uPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe) iv) 32 mm diameter

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed B) uPVC pipe with uPVC fittings ( Using uPVC high pressure pipe) (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe) v) 40 mm diameter

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed C) CPVC pipe with CPVC fittings (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe) iii) 25mm (OD) diameter

Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed C) CPVC pipe with CPVC fittings (Using SUPREME/ PRINCE/ SFMC/ FUSION brand pipe) v) 40 mm diameter

Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes 2000 litre capacity (a) Sintex make

Labour for erecting and placing the G.I. Tank over the stagging up to a height of 5.00m complete as directed. (b) 1000 liter capacity

Labour for erecting and placing PCVC Tank over the stagging up to a height of 5.00m complete as directed. (c) 1000 litre capacity

Labour for boring hole for inserting tube well pipes through different soil/ rock media including hire charges of drill pipes, scaffolding, tools and plants as necessary and taking out the same and lowering pipes, fittings complete as directed by the Department. x) Bore hole of 300mm diameter

Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by the Department. G.I. pipe a) TATA / SAIL (Medium) socket should be welded to the pipes. iv) 100mm diameter

Supplying, fitting and fixing suction pipes plain/bevel ended, conforming to relevant IS codes of practice including supplying and fitting of accessories, lowering of assembly pipes concentrically in the casing pipes complete as directed. A) G.I. pipe a) TATA / SAIL (Medium)socket should be welded to the pipes. iii) 40mm diameter

SITC of FOH , High Power Low Frequency Arrayable Loudspeaker 2 x 12.00" or better LF driver 1000 Watts rms power or better Impedence - 4 Ohms Frequency Range 100 Hz - 600 Hz Maximum SPL 141dB Peak or better Multiple Flying Inserts Birch Plywood Enclosure Make: Music Group / Funktion One / Renkus-Heinz

SITC of Full Range Biamplified/Tri-amplified Arryable Loudspeaker 2 x 12.00" or better LF driver LF- 1000 W RMS or better,MF - 200 W or better, HF- 90 W RMS or better Impedence - 4/8 Ohms Frequency Range 100 Hz - 20 KHz Maximum SPL LF - 141 dB Peak or better; MF/HF-144dB or better Dispersion : 60 degree conical or better Multiple Flying Inserts Birch Plywood Enclosure Make: Music Group / Funktion One / Renkus-Heinz

SITC of Two Way Mid High Downfill Bi-Amplified Speaker MF RMS power 200 W or better HF RMS power 90 W or better Impedence - 8 Ohms Frequency Range 380 Hz - 20 kHz Maximum SPL MF - 143 dB Peak or better HF - 141dB peak or better 60 x 40 degree or better dispersion Multiple Flying Inserts Birch plywood Enclosure Make: Music Group / Funktion One / Renkus-Heinz

SITC of Flying / Array Brackets for array cluster Single point suspension To provides desired tilt angle and toe-in for optimum positioning Shall be from same OEM of FOH Speakers Make: Music Group / Funktion One / Renkus-Heinz

SITC of Dual 18" High Power Direct Radiating Subwoofer Power Handling: 2000 W @ 2 x 8 Ohm or better continous Impedance : 4 ohms or 2 x 8 ohms discrete opertaion Frequency Response : 25 Hz - 600 Hz Maximum SPL 144 dB Peak or better System Sensitivity : 106dB Birch Plywood Construction Rigging point for ceiling hanging Complete with flying arrangements Make: Music Group / Funktion One / Renkus-Heinz

SITC of Stage Front Fill, Passive Full Range Loudspeaker 1×10" or better LF Driver, minimum 4 x 3" HF Driver 150 Watts rms power or better Impedence - 8 Ohms Frequency Response: 50Hz-18kHz Maximum SPL 118 dB Peak or better Dispersion 130°-150° H x 70° - 80° V 90 dB or better sensitivity Complete with mounting Bracket Make: Music Group / Funktion One / Renkus-Heinz

SITC of Front Fill, Dual 12" High Output Subwoofer Power Output 800 W rms or better Impedance: 4 ohms Frequency Response 40 Hz - 200 Hz Maximum SPL 135 dB peak or better System Sensitivity 100 dB or better Birch Plywood Construction Make: Music Group / Funktion One / Renkus-Heinz

SITC of Under Balcony Speaker,High Output single 10" 2-way or better 1×10" or better LF, 1×1" or better HF Driver 300 Watts rms power or better Impedence - 8 Ohms Frequency Response: 70Hz-18kHz Maximum SPL 126 dB Peak or better Dispersion 90°-100° x 50° - 60° 95 dB or better sensitivity Rotatable waveguide Birch plywood Construction Complete with mounting Bracket Make: Music Group / Funktion One / Renkus-Heinz

SITC of Stage Monitor, 2 way Active Speaker 12" or better LF, minimum 1" HF 2000 Watt or better power handling Class-D Amplifier Built-in DSP with feature of EQ , Delay, Limiter Frequency response 45 Hz – 18 KHz Maximum SPL 133 dB peak or better Nominal dispersion 70-90 degree H x 50-60 degree V Birch Plywood construction Make: Music Group / Funktion One / Renkus-Heinz

SITC of Active Stage fill Subwoofers Single 18" 2000 Watt or better power handling Class-D Amplifier Built-in DSP with feature of EQ , Delay, Limiter Frequency response 35 Hz – 100 Hz Maximum SPL 134 dB peak or better Birch Plywood construction Make: Music Group / Funktion One / Renkus-Heinz

SITC of Green Room/Control Room Surface Mount Speaker 4" LF, 0.75" or better HF Driver RMS power handling : 40 W 70/100 Volt Tappings - 30W/15W/7.5W Impedance : 4 / 6 / 8 Ohms Frequency Range 70 Hz - 18 kHz Sensitivity 84 dB or better Maximum Peak SPL 105 dB or better Dispersion : 90 degree or better Horizontal, 60 degree or better vertical dispersion Complete with yoke mount bracket Make: Music Group / Funktion One / Extron

SITC of 4-Channel 10000 W power amplifier Type - Class D / TD Output per Channel: 4 x 2100 W @ 4 ohms and 4200 W @ 8 ohms bridged THD 20 Hz - 20 kHz at 1W <0.1% Signal to Noise Ratio >112 dBA or better Frequency Response 20 Hz - 20 kHz Voltage Peak Limiter slection per channel Network Monitor Port (If OEM giving Dual channel amplifier then the quantity shall be double to match the amplifier channel) Make: Music Group / Funktion One / MC Square

SITC of 2-Channel 7000 W power amplifier Type - Class D / TD Output per Channel: 2 x 2800 W @ 4 ohms and 5600 W @ 8 ohms bridged THD 20 Hz - 20 kHz at 1W <0.1% Signal to Noise Ratio >112 dBA or better Frequency Response 20 Hz - 20 kHz Voltage Peak Limiter slection per channel Network Monitor Port Make: Music Group / Funktion One / MC Square

SITC of 2-Channel 2400 W power amplifier with Integrated DSP Type - Class D / TD Per channel output power: 2 x 1150W @ 4ohm, 2 x 550W@8ohm THD 20 Hz - 20 kHz for 1 W: <0.1% Signal To Noise Ratio: >105 dBA or better Frequency response: 20 Hz - 20 kHz Built-in DSP & LAN ports for Network Monitoring Make: Music Group / Funktion One / Procella / MC Square

SITC of 2-Channel 1200 W power amplifier with Integrated DSP Type - Class D / TD Per channel output power: 2 x 600W @ 4ohm, 2 x 300W@8ohm THD 20 Hz - 20 kHz for 1 W: <0.1% Signal To Noise Ratio: >102 dBA or better Frequency response: 20 Hz - 20 kHz Built-in DSP & LAN ports for Network Monitoring Make: Music Group / Funktion One / Procella / MC Square

SITC of Dual Channel Power amplifier Peak total output all channels driven: 120 W Per channel output power: 60w@4/8ohm THD 20 Hz - 20 kHz for 1 W: min<0.3% Signal To Noise Ratio: >92 dBA Energy Star Rated Frequency response: 20 Hz - 20 kHz Make: Music Group /Funktion One / Extron

SITC of Digital Audio Loudspeaker Processor 2 Analog inputs, 6 Analog outputs Lake or better Signal Processor High quality A/D and D/A 24-bit conversion Max Availlable User Delay - 2 sec or better Presets - 100 or better Linear phase and classic crossovers Cosine Mesa & Ideal GraphicInput Equalizer Dynamic Range Input / Outpur: 115dB or better Crosstalk: -98Db or better Network Latency: 0.5ms to 4ms AES3 Supported Sample Rate: 44 - 192KHz Limiter Max peak and RMS limiters 32-bit floating point internal data path 96 kHz internal sampling frequency 4 x 8 AES Digital I/O 4 × 8 Dante/AVB networked I/O Make: Music Group / XPA /Meyersound

SITC of 40 channel Digital Mixing Console 32 mic inputs, 24 bus, 16 Aux outputs Main LCR out and Matrix outputs Built in Stage Box Interface 8 DCA and 6 mute groups, Built in effect processor 32 x 32 channel USB 2.0 audio interface 192 kHz, 24 bit ADC and DAC converters with minimum 112 dB dynamic range Minimum 24 motorised 100 mm faders Optional wireless remote control for iPhone* and iPad* etc. Complete with Built in aur external 100-Band RTA for all Channel/Bus EQ 's Auto-ranging universal switch-mode power supply Digital mixer should be supplied with 32 inputs and 16 output stage Box from same manufacture of Digital Mixer Make: Music Group / Funktion One/Yamaha

SITC of Active Stereo DI Box for electronic instruments 48 V phantom Power Extended Dynamic Range Sum and split options 20 dB input pad Earth lift switches Impedance 75 Ω Make: Music Group / Funktion One / Radial

SITC of Floor mount boxes with 3 x XLR Microphone input with Neutrik Connector etc as required Make: Custom with Neutrik Connector

SITC of Floor mount boxes with 2 x XLR Microphone output with Neutrik Connector etc as required Make: Custom with Neutrik Connector

SITC of Rack Structure 32U With front glass door power distribution box Internal fans and lights, wheels Make: Valrack / Rittal / President

SITC of 22 AWG 2 core ATC Copper Conductor,PVC Insulated, 90% ATC Copper Braid Shielded, PVC Sheathed Microphone Cable complete etc as required. (as per actual)Supplying and fixinf of Connectors, terminal strips in junction boxes & Provision to fly loudspeakers etc as required Make: Sommer / Gotham / Belden

SITC of 4 Sqmm x 2 core(12AWG) ATC copper Conductor, Insulated Cores,PVC Sheathed Speaker Cables complete etc as required.(as per actual) Make: Sommer / Gotham / Belden

SITC of 2.5 Sqmm x 2 core(14AWG) ATC copper Conductor, Insulated Cores,PVC Sheathed Speaker Cables complete etc as required. (as per actual) Make: Sommer / Gotham / Belden

SITC of 8 Core Audio Snake Cable Make: Sommer / Gotham / Belden

SITC of CAT-6 STP Cable,4 pair,0.58 mm Bare copper, ATC Copper Braid Shielded,PVC Sheathed (as per actual) Make: Sommer / AMP / Belden

SITC of Various Connectors and accessories Make: Neutrik / Amphenol / Switchkraft

SITC of Wireless Vocal system with super-cardioid dynamic microphone Frequency response 80Hz - 18KHz THD, total harmonic distortion < 0,9 % AF sensitivity 1,6 mV/Pa Signal-to-noise ratio > 115 dB(A) RF output power 10/30 mW Make: Sennheiser / Funktion One / Beyerdynamic

SITC of High-quality Permanently Polarized Condenser Headmic Frequency response 40Hz - 20KHz Pick-up pattern cardioid Sensitivity in free field, no load (1kHz) 4 mV/Pa Nominal impedance 1000 Ω Equivalent noise level 37 dB(A) Maximum sound pressure level (passiv) 150 dB Make: Sennheiser / Funktion One / Beyerdynamic

SITC of Wireless Bodypack Transmitter Connector 3.5 mm jack socket, lockable Impedance 1 MΩ Frequency response 50Hz to 20KHz RF output power adaptive, up to 100 mW Input sensitivity automatic sensitivity adjustment Make: Sennheiser / Funktion One / Beyerdynamic

SITC of Stationary receiver RF output power back channel 10 mW/100 mW Power supply 12 V DC hollow jack Antenna connector 2 x Rev-SMA RF sensitivity <-90 dBm Equalizer 7-band graphic equalizer Display OLED Make: Sennheiser / Funktion One / Beyerdynamic

SITC of Wired Dynamic Super-cardioid Vocal Mic Frequency response (Microphone) 40Hz - 16KHz Sensitivity in free field, no load (1kHz) 1,8 mV/Pa Nominal impedance 350 Ω Switch On/Off Connector XLR-3 Make: Sennheiser / Funktion One / Beyerdynamic

SITC of Metal gooseneck Microphone connector XLR 3 Phantom powering P12 to P48 V Goose neck length 600 mm Make: Sennheiser / Funktion One / Beyerdynamic

SITC of Condenser Microphone Head For Gooseneck Frequency response (Microphone) 40Hz to 20 kHz Pick-up pattern cardoid Maximum sound pressure level (passiv) 130 dB SPL Equivalent noise level 26 dB(A) Impedance 50 Ω Make: Sennheiser / Funktion One / Beyerdynamic

SITC of Drum Kit Microphone Pack 1 x Kick Drum Mic 2 x Overhead Mics 4 xTom & Snare Microphones Make: Sennheiser / Funktion One / Beyerdynamic

SITC of Dynamic Cardioid Instrument Microphone Frequency response 40Hz - 18KHz Sensitivity in free field, no load (1kHz) 1,8 mV/Pa Nominal impedance 350 Ω Connector XLR-3 Make: Sennheiser / Funktion One / Beyerdynamic

SITC of Dynamic Super-cardioid Miniature Instrument Microphone Frequency response 40Hz - 16KHz Pick-up pattern super-cardioid Sensitivity in free field, no load (1kHz) 0,8 mV/Pa Nominal impedance 250 Ω Make: Sennheiser / Funktion One / Beyerdynamic

SITC of Dynamic Cardioid Instrument Microphone Frequency response 40Hz - 18KHz Sensitivity in free field, no load (1kHz) 2 mV/Pa Nominal impedance 350 Ω Make: Sennheiser / Funktion One / Beyerdynamic

SITC of 10 KVA Online UPS :-Smart UPS for extended run time -Online high density double conversion technology Application-for server/voice & data/ network/medical labs & light industrial applications-Harsh environment Maximum Load factor-9000 Watts Efficiency->94.0% (at 100% load) Crest Factor- 3:1 Sockets -1 Hard Wire 3-wire (HN+G) (international PC connectors) Front Panel -LED+LCD Display Optional SNMP card External batteries -Optional depending on required run time Built in Automatic Bypass with 12V 65 AH Exide Batteries and Battery Rack. Make:- APC/ Numeric

Supply and installation of acoustics frabric pasted Heradesign Fine of size 600x1200x25mm thk by using H-Splines mounted on Strut (having density 12.4 Kg/m3, Sound absorpation value aw up to 0.90 , Reaction to fire according to EN 13501-1:B-s1,dO ,Strut is fixed Horizontal to the wall at every 600mm c/c. Perpendicular to Strut position first fix H-Splines, Insert Panel into H-splines section and against wall. The Heradesign Fine panels will be back lined with Polyester wool having a density of 1000 GSM and 50mm thick

Supply and installation of FR grade 150mm wide 12mm thick laminated plywood (150mm wide slat and 3mm gap between 150mm wide plywood) backed with 50mm thick 1000GSM polyester wool. Frame work consists of 25mm thick GI wall channels with fully knurled surface of 0.55mm thick 80mm width, having two equal flanges of 26mm. A GI wall channel is fixed to the walls in horizontal direction with the help of suitable fastners at 600mm C/C then an another 25mm thick GI wall channel is fixed vertically over the horizontlly laid wall channel at 600mm C/C .The frame work shall be back lined by using polyester wool having a density of 1000 GSM and 50mm thick.150 mm wide 12 mm thick laminated plywood is fixed on to frame work and 3mm gap is maintained between 150mm wide plywood and length as per the drawing of approved finish and then fixed to GI frame work by using suitable fasteners and ensure proper level of the panel surface.

Supply and installation of Heradesign Fine wood wool panel ,painted, ( Made in Austria ) of size 1200 x 600 x 15mm mounted on proprietory supplied G I Frame work consisting of basic profile, main profile,edge profile and spacer. The Heradesign Fine panels will be back lined with Polyester wool having a density of 1000 GSM and 50mm thick

Supply and installation of (12mm square perforations) Perforated gypsum plaster board backed with 50mm thick 1000GSM Polyester Wool to achieve NRC of minimum 0.75. Frame work shall consists of GI perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm) fixed along with perimeter of the gypsum or walls with the help of nylon sleeves and screws at 600mm c/c. Then suspend GI main channels of size 45 mm (0.9mm thick with 2 flanges of 15mm each) from the soffit at 1200mm c/c by using soffit angle of size 25mm x 10mm x 0.55mm thick fixed to true ceiling by using suitable fasteners. Cross channels of size 0.55mm thickness having knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the main channel with the help of connecting clips and in a direction perpendicular to the main channel at 300mm c/c . Ceiling frame work shall be back lined by using polyester wool having a density of 1000 GSM and 50mm thick. A layer of 12.5mm thickness fiber reinforced Perforated gypsum plaster board of size 1200x 2400 mm having perforations is fixed on to frame work. perforated gypsum boards used shall have RH 90% and fire rating A2-s1, d0

Supply and installation of Heradesign Fine wood wool panel ,painted, ( Made in Austria ) of size 1200 x 600 x 15mm mounted on proprietory supplied G I Frame work consisting of basic profile, main profile,edge profile and spacer.

Supply And Installation Of Stage Floor Area, Consisting Of Plywood Of 2400 x 1200 x 19mm thk, Wooden Batten And Requisite Accessories & Tools. Layer of 19mm Plywood Is Fixed On 50mm x 75mm thk. Wooden Batten Frame Work At A Gap Of Every 600mm c/c. Segun Wood Of 1200mm x 150mm x 25mm thk Is Then Fixed On Plywood Finished Floor With Polish Of Approved Colour.

SITC of 50 mm thick Underdeck Insulation comprising resin bonded fibrelgass (48 kg/cum density) in roll form with one side with FRK facing with stapling flanges over 75 x 75 x 1.6 mm galvanized steel weld mesh tied to purlins with 18G binding wire, complete including taping/stapling the joints of FRK facing to provide a vapour barrier against condensation and to be in close contact with metal roofing. The entire work shall be done as per drawings and directions, complete.

SITC of scaffolding and working platform for interior and ceiling-installed works in auditorium main hall (as a working platform), with secure supporting frame (steel/timber/bamboo) and spaced floor of timber/bamboo adequate for safe work activity and at suitable height (up to 10 M above floor level) to facilitate proper working conditions, inclusive of erection and dismantling as required, complete (all safety measures for stable and secure installation shall be maintained as directed):

SITC of 54x3W CE certified LED Par high brightness mixing color evenly, stable performance DMX, and power and DMX loop in and out option. back LED display, CRI Value above 85, Self dimming option from 0-100%, 5 Pin Dmx XLR for mix dimming operation but without any accessories undergone through 7 Tank chemical treatement to keep them rust free and, black matt texture finish and technical specifications as below. • Lamp - 54 x 3W 3200K LED, • Power consumption – 160W, Power supply - 230/240V AC,• Channels - 1 Channel DMX-512, Beam angle - 25° (15°, 45° optional)• Lux level – 12310 at 2 mtr • Control mode - DMX through 5 pin male and female, Manual. Function - Manual dimming, DmX modes of operation. Make: Robe / Martin / Canara lighting.

SITC of 54x3W CE certified LED par light complete with 8-channel DMX 512, high brightness mixing color evenly, stable performance with sound active auto, DMX, and power and DMX loop in and out option. undergone through 7 Tank chemical treatement to keep them rust free and, black matt texture finish and technical specifications as below. • Lamp - 54 X 3W RGB LED (12R+18G+18B+6W) • Power consumpsion - 150W • Power supply - 230/240V AC • Channels - 8 Channel DMX-512 • Beam angle - 25° (15°, 45° optional) • Control mode - DMX, and Manual. • Function - strobe, Dimming, sound active. Make: Robe / Martin / Canara lighting.

SITC of 2x2 blinder matrix fixture with advanced COB LED technology light with below specifications:- • Frequency : 50-60Hz • Power Consumption: 240W • LEDs Qty : 4 pieces • Light Color: Single color warm white (3200K) • Lifetime: Over 50,000 hours • Dimmer: 0~100% linearly adjustable • Beam Angle: 30 degree • Control mode: DMX512,Master/Slave, Auto Run, Sound active. • IP Grade: IP20 • Net Weight: 5kgs. Make : Canara Lighting / Selecon / Robe.

SITC of CE certified 300 W LED Profile light 19 degree 3200K with below specifications:- • Voltage : AC90 - 260 V 50 -60Hz, • dimming:0-100% linearly adjustable manualy focusable, high quality optical system,glass reflector, • Control protocaol :DMX 512, • Control system:DMX,Auto run and master/slave, • IP Grade :IP20 • working temp:30-40 degree celcius, • No noise fan of pc cooler, • Net Weight:7Kg Make: Spotlight / ETC / Canara lighting.

SITC of 200W CE certified LED Fresnel spot light, 3200K with with 35,600 lux at 2mtr in spot, 3210 lux at 2mtr in flood complete with 200mm dia German Lens,normal operated yoke provided and technical specifications as below. • Lamp power - 200W • Power supply - 100-240 AC, 50/60 Hz • Power cable - 3 core 1.5 sq. mm. copper PVC insulated • Color Temperature: 3200K • CRI > 95, TLCI>90 • Dimming - 0-100% through manual and DMX • Beam Angle - 10°-50° • Protection rating - IP20 • Dimension - 250 x 370 x 295mm, Weight – 7.6Kg Make : Canara Lighting / ARRI / ETC.

SITC of 100W LED PARCAN with below specifications: • Lamp power - 100W • Power supply - 100-240 AC, 50/60 Hz • Channels: 2 channel DMX 512 • Control: Manual, DMX • Color Temperature: 3000K • CRI > 90 • Function: Dimming, Strobe • Dimming: 0-100% • Beam Angle - 15/20° • Protection rating - IP20 • Dimension - 420 x 280 x 452mm, Weight – 4.5 Kg Make : Canara Lighting / Desisti / ETC.

SITC of 4- leaf barndoor with scrims for 200W LED fresnel spot light, undergone through 7 Tank chemical treatement to keep them rust free and, duly powder coated in black matt texture finish. Make: Desisti / ARRI / Canara lighting.

SITC of 4- leaf barndoor for LED PAR spot light, undergone through 7 Tank chemical treatement to keep them rust free and, duly powder coated in black matt texture finish and technical specifications as below. Make: Robe / Martin / Canara lighting.

SITC of Diecast aluminum "C" clamp with safety locking chain, duly powder coated in black matt texture finish and technical specifications as below. • Lock - MS threaded Galvanized lock key, Plastic Glass filled nylon moulded M6 key. • Receptacle - 28mm standard TV spigot. • Safety - MS Galvanized chain with pin. • Finish - Pretreated and black epoxy polyester powder coated. • Self weight - 0.54Kg • Safe working load – 150Kg. Make : Canara Lighting / ARRI / Desisti.

SITC of Safety bond with lock clip to be fixed around the grid to avoid fall of the material in case if the "C" clamp is not locked properly . SWL 100Kgs. Make : Canara Lighting / ARRI / Desisti.

SITC of Identification name plate round 79MMundergone through 7Tank chemical treatement to keep them rust free and duly powder coated in black matt texture finish Make : Canara Lighting / ARRI / Desisti.

MS suspender consisting of fish plate of 150X150X6mm undergone through 7Tank chemical treatement to keep them rust free and with requisite anchor fastner(Customised) duly powder coated in black matt texture finish & stud with 12mm threaded rod to keep the Bar rigidly held With SWL of 200kg. Make : Customised / Canara Lighting.

SITC of MS "C" track size of 40 x 50 x 40mm, 3mm thick with owal slot of 14 x 40mm at every 200mm,made up of SAIL/Jindal make with 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish. Self weight 3.3Kg per mtr. Make: Stage lighting / Stage technologies / Canara Lighting.

SITC of Motorized winch to be used as 10m Light bar with frill attachment made of 40NB made up of SAIL/Jindal make dual barrel of 2 mm thickness along with 1.5HP 3PH AC motor (REMI Make) having noise level of less than 70 dB with DC Brake Necessary pulley, guide pulleys GI wire rope of minimum 5mm in diameter constructed with 6 bundles of 19 strands with fiber/steel core at center, winding drum Specially designed compact worm gear box Cam type double Upper and lower limit controller Requisite trunking arrangement it, made of 22SWG CRCA Mild steel in 2 pieces with Epoxy polyster powdered coated in black texture with individual length of flip flop of 1300mm, thickness of 22mm, width of 116mm. Make: Waagner Biro / Stage technologies / Canara Lighting.

SITC of Motorized winch to be used as 12m FOH Light bar made of 40NB made up of SAIL/Jindal make dual barrel of 2 mm thickness along with 1.5HP 3PH AC motor (REMI Make) having noise level of less than 70 dB with DC Brake Necessary pulley, guide pulleys GI wire rope of minimum 5mm in diameter constructed with 6 bundles of 19 strands with fiber/steel core at center, winding drum Specially designed compact worm gear box Cam type double Upper and lower limit controller Requisite trunking arrangement it, made of 22SWG CRCA Mild steel in 2 pieces with Epoxy polyster powdered coated in black texture with individual length of flip flop of 1300mm, thickness of 22mm, width of 116mm. Make: Waagner Biro / Stage technologies / Canara Lighting.

SITC of Motorized winch to be used as 25m Utility bar made of 40NB dual barrel made up of SAIL/Jindal make of 2 mm thickness along with 1.5 HP 3PH AC motor (REMI Make) having noise level of less than 70 dB with DC Brake Necessary pulley, guide pulleys GI wire rope of minimum 5mm in diameter constructed with 6 bundles of 19 strands with fiber/Steel core at center, Pile winding drum Specially designed compact worm gear box Cam type double Upper & lower limit controller Requisite trunking arrangement like cable retractor made of 22SWG CRCA Mild steel in 2 pieces with Epoxy polyster powder coated in black texture finish with individual length of flip flop of 1300mm, thickness of 22 mm, width of 116 mm. Make: Waagner Biro / Stage technologies / Canara Lighting.

SITC of Side lader, made using 40NB dual barrel undergone through 7 Tank chemical treatement to keep them rust free and duly powder coated in black matt texture finish Size of 1800mm x 600mm Make: Waagner Biro / Stage technologies / Canara Lighting.

SITC of Grand Tab track system 25 mtr long, centre parting with overlap of 0.9mtr provided with,Heavy duty extruded aluminium I track of 48x84mm, powder coated Track mounting brackets constructed of C track of dimension 40X50X40mm Electromechanical drive unit with 3PH INDUCTION MOTOR, VFD DUTY, 1.1KW, 3000RPM, 90B5 FLANGE MOUNT with Variable Frequency drive for achieving variable speed through POT for curtain movement GI wire ropes of 3mm in diameter constructed with 7 bundles of 7 strands with steel core at center Curtain holding Nylon wheel trollies consisting of 4 wheeler master trolley and 2 wheeler trolley placed uniformly at specific interval of 200mm throughout the track.Nylon moulded 6201 Ball bearing Diverter pulley with with 90mm for outer diameter, 72mm diameter at groove base, 19mm pulley thickness & MS yellow passivated Routing pulleys with 165mm for outer diameter, 150mm diameter at groove base with 12mm pulley thickness. Make: Waagner Biro / Stage technologies / Canara Lighting.

SITC of MS, Wing Dual frame construction,made out of 25X25mm MS square pipe with 2mm in thickness powder coated of size 9m x 2m , provided with 1.5meter wing track of 48X84mm with gridmount brackets made of 40X50X40mm C track Pivotable 4wheeled suspension trolley Adjustable floor locking screw jacks with rubber grips Inverted 4-Wheeler Trolley with Flexi Adaptor Clamp Extruded track Aluminium I Profile to be laid through out the dept of the stage. Make: Waagner Biro / Stage technologies / Canara Lighting.

SITC of Cyclorma arrangement using aluminium extruded ''I'' track of 48 x 84mm duly powder coated in black texture finish to use as straight cyclorama track with MS fabricated Grid/wall mount bracket constructed of C track of dimension 40X50X40mm duly powder coated to hold the track, MS fabricated Tie down railing cut length 3 mtr duly powder coated to keep the cyclorama in drum tight arrangement, 2 wheeler trolley placed uniformly at specific interval of 200mm throughout the track, MS powder coated Leading edge frame to keep the cyclorama in drum tight arrangement of Size 17mtr x 8Mtr. Make: Waagner Biro / Stage technologies / Canara Lighting.

SITC of Rear Tab track system 25 mtr long, centre parting with overlap of 0.9mtr provided with,Heavy duty extruded aluminium I track of 48x84mm, powder coated Track mounting brackets constructed of C track of dimension 40X50X40mm Electromechanical drive unit with 3PH INDUCTION MOTOR, VFD DUTY, 1.1KW, 3000RPM, 90B5 FLANGE MOUNT with Variable Frequency drive for achieving variable speed through POT for curtain movement GI wire ropes of 3mm in diameter constructed with 7 bundles of 7 strands with steel core at center Curtain holding Nylon wheel trollies consisting of 4 wheeler master trolley and 2 wheeler trolley placed uniformly at specific interval of 200mm throughout the track.Nylon moulded 6201 Ball bearing Diverter pulley with with 90mm for outer diameter, 72mm diameter at groove base, 19mm pulley thickness & MS yellow passivated Routing pulleys with 165mm for outer diameter, 150mm diameter at groove base with 12mm pulley thickness. Make: Waagner Biro / Stage technologies / Canara Lighting.

SITC of Main Valance fixing arrangement using 40NB made up of SAIL/Jindal make 2mm thick, 25mtr in length MS pipe, undergone through 7 tank process with various chemical treatment to keep them rust free duly powder coated with matt black texture finish with mounting brackets. Make: Waagner Biro / Stage technologies / Canara Lighting.

SITC of MS Power junction box made up of 22SWG CRCA sheet of jindal make undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish 4 way 10A IEC Socket of below specifications:- • Fixing : Snap fit /15 (1.5mm) • Terminations : /28 (2.8mm solder) • Total Max Rating : 10A, 250V a.c • Operating Temp : –20˚C to +70˚C • Mouldings : Nylon, Flammability Rating UL94V-0 Make : Canara Lighting / ABB / SCHNEIDER

SITC of MS Signal junction box made up of 22SWG CRCA sheet of jindal make undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish 5 pin XLR DMX out connector of below specifications:- • Extra high temperature resistant insulator material. • All metal housing offers best overall RF protection & electromagnetic shielding • New duplex ground contact for excellent contact integrity between chassis and cable connector, Larger solder contacts for easier termination • Optional connection to easily join pin 1 to chassis ground Make : Canara Lighting / ABB / SCHNEIDER

SITC of MS Signal junction box made up of 22SWG CRCA sheet of jindal make undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish finish 5 pin XLR DMX in connector of below specifications:- • Extra high temperature resistant insulator material. • All metal housing offers best overall RF protection & electromagnetic shielding • New duplex ground contact for excellent contact integrity between chassis and cable connector, Larger solder contacts for easier termination • Optional connection to easily join pin 1 to chassis ground. Make : Canara Lighting / ABB / SCHNEIDER

SITC of MS fabricated power marshalling box made up of 20SWG CRCA sheet undergone through undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish ivory connect conectwell make and FC-11 naylon gland,Brass galnd suitable for power cable with proper earthing connecter . Make : Canara Lighting / ABB / SCHNEIDER

SITC of MS DMX lighting junction loop box made up of 22SWG CRCA sheet of jindal make undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish 5 pin XLR DMX in / out connector of below specifications:- • Extra high temperature resistant insulator material. • All metal housing offers best overall RF protection & electromagnetic shielding • New duplex ground contact for excellent contact integrity between chassis and cable connector, Larger solder contacts for easier termination • Optional connection to easily join pin 1 to chassis ground. Make : Canara Lighting / ABB / SCHNEIDER

SITC of MS fabricated PLS junction boxes made up of 20SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish for all the light bar with required no of ivory connectors. Make : Canara Lighting / ABB / SCHNEIDER

SITC of MS Auxilary fabricated marshalling boxes made up of 20SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish for all the light bar with required no of ivory connectors. Make : Canara Lighting / ABB / SCHNEIDER

SITC of fabricated RACK for housing PDCP(with MCBP) and DIMMER modules. Make : Canara Lighting / ABB / SCHNEIDER

SITC of MS Fabricated made up of 22SWG CRCA sheet of jindal make undergone through 7 tank process with various chemical treatment to keep them rust free, duly powder coated with Matt black texture finish power junction box (PJB) to terminate the Motorized section power connections. Make : Canara Lighting / ABB / SCHNEIDER

SITC of Well designed and engineered Wall mount 12 feeder motor control centre panel with necessary meterings and contactors and relays to control motorised system (MCCP-12) Make : Canara Lighting / ABB / SCHNEIDER

SITC of Well designed and engineered Wall mount 12 feeder Remote control panel with necessary meterings and contactors and relays to control the control motorised system.(RCP-12) Make : Canara Lighting / ABB / SCHNEIDER

SITC of Well designed and engineered Wall mount 3 feeder motor control centre panel / Remote control system with necessary meterings and contactors and relays to control motorised system (MCCP / RCP -3) Make : Canara Lighting / ABB / SCHNEIDER

SITC of MS sheet metal fabricated power junction box duly powder coated and fitted with 2 10amps 3 pin IEC socket,ON/OFF switch and necessary glands to power splitters and console undergone through 7 tank process with various chemical treatment to keep them rust free duly powder coated with Matt black texture finish for dimmable points along with the FC7 glands. Make : Canara Lighting / ABB / SCHNEIDER

SITC of MS sheet metal fabricated emergency push button station undergone through 7 tank process with various chemical treatment to keep them rust free duly powder coated with Matt black texture finish for emergency trip. Make : Canara Lighting / ABB / SCHNEIDER

SITC of Internal earthing copper bare conductor network related to work coming under our scope.

SITC of Installation hardwares such as clamps, connectors, glands, lugs, ferruels, welding rods etc.

SITC of MS perforated trays with tray lid treated with 7 tank process with various chemical treatment to keep them rust free, duly powder coated with matt black texture finish paint along with clamping arrangement . Make : Customised / Canara Lighting. Size 40 x 75 x 40mm

SITC of MS perforated trays with tray lid treated with 7 tank process with various chemical treatment to keep them rust free, duly powder coated with matt black texture finish paint along with clamping arrangement . Make : Customised / Canara Lighting. Size 40 x 150 x 40mm

SITC of MS perforated trays with tray lid treated with 7 tank process with various chemical treatment to keep them rust free, duly powder coated with matt black texture finish paint along with clamping arrangement . Make : Customised / Canara Lighting. Size 40 x 300 x 40mm

SITC of Grid mount photo isolator DMX Amplifier unit 1 DMX input and 8 isolated output with following specifications:Power Supply: 90-240V AC, 45-63Hz.Control: DMX 512 protocol,Control Signal input: 5 pin XLR female,Size: 482 x 44 x 128mm ,Weight: 2Kg.with splitter bracket. Make: Liteputer / ADB / Zero88.

SITC of Programmable digital lighting console 240 dimmer channel with following features and specifications as below : • 296 devices • USB support for show files storage and touchscreen • 4 universe optically isolated DMX outputs, or Art-Net and scan • ZerOS Operating Software • Colour Picker • Monitor display • 12" LCDs display • Optional hardware upgrade enables SMPTE/MIDI/ChilliNet and Remote Switches • Submaster playback faders with scenes or chases • RDM Ready • Macros: 30 • Colour/Beamshape/Position Palettes: 30 each • Support for iOS®, AndroidTM, Windows Mobile and Windows PC remote displays • Fixture Library with over 3000 types • Comprehensive effects system • Shows cross loadable with other ZerOS consoles and importable from original Frog Series Make: Liteputer / ADB / Zero88.

Consumables:- SITC of 5 pin XLR male / female connectors. Make: Neutrik / CL / Amphenol

Consumables:- SITC of 5 Pin XLR Termination plug. Make: Neutrik / CL / Amphenol

Consumables:- SITC of Valcro Tape (White if available)

Consumables:- SITC of Assorted colour gel filter roll size 4ft x 25ft.

SITC of Fire retardant velvette fabric with lining 300% gathering for main Valance with approved color duly stitched. Size : 25mtr x 1.5mtr. Make : Rayan / Ompile / Raymonds.

SITC of Fire retardant velvette fabric with lining, 100%(Double) gathering for Main curtain with approved color duly stitched and with eyelets. Size : 25mtr x 10mtr Make : Rayan / Ompile / Raymonds.

SITC of Fire retardant cotton fabric with lining, 50% gathering for Rear curtain with approved color duly stitched and with eyelets. Size : 25mtr x 10mtr Make : Rayan / Ompile / Raymonds.

SITC of Fire retardant cotton fabric with lining, 50% gathering for frill with approved color duly stitched and with eyelets. Size : 10mtr x 1.5mtr Make : Rayan / Ompile / Raymonds.

SITC of Fire retardant cotton fabric wing duly stiched with 0% gathering. Size: 9mtr x 2mtr. Make: Rayan / Ompile / Raymonds.

SITC of Perforated plastic cyclorama screen with perforation on 1side. Size: 17mtr x 8mtr.

SITC of PVC Copper unarmoured flexible FRLS insulated multicore cable 1100V grade confirming to IS694 size 3cx2.5 sq mm. Make: Walna / SBEE / Polycab.

SITC of PVC Copper unarmoured flexible FRLS insulated multicore cable 1100V grade confirming to IS694 size 12cx2.5 sq mm. Make: Walna / SBEE / Polycab.

SITC of FRLS PVC copper multistrand flexible cable 7 core x 1.5 sq.mm. Make: Walna / SBEE / Polycab.

SITC of PVC Copper unarmoured flexible FRLS insulated multicore cable 1100V grade confirming to IS694 size 24cx0.5sq mm. Make: Walna / SBEE / Polycab.

SITC of PVC Copper armoured flexible FRLS insulated multicore cable 1100V grade confirming to IS694 size 4cx4 sq mm. Make: Walna / SBEE / Polycab.

SITC of DMX signal cable for DMX network. Make: Falcon / Beldon / Polycab.

Carbon Dioxide type extinguisher with cylinder fully charged with 4.5 Kg capacity.

Supply, testing, commissioning of Dry Powder Type (gas cartridge) with cylinder, initially fully charged with dry powder (a b c type) of 5 kg capacity complete with standard discharge valve with tube c. I (for wall mounting etc.) conforming to IS : 217.

Supply, installation, testing and commissioning of Intelligent Plug-in Photo Electric Smoke Detectors, with features including integral communication, dual LED for 360˚ viewing angle, walk test with address display etc. UL / LPCB approved: Make : HONEYWELL, MORLEY IAS, Model : MI / PSE / S2/IV or approved equivalent.

Supply, installation, testing and commissioning of Intelligent Plug in Thermal Detectors with features including integral communication, dual LED for 360˚ viewing angle, walk test with address display etc, UL / LPCB approved. Make : HONEYWELL, MORLEY IAS, Model : MI / RHSE/S2/IV or approved equivalent.

Supply, installation, testing and commissioning of Addressable Hooter, complete with control module, UL / LPCB approved. Make : HONEYWELL, MORLEY IAS, Model : WSO/PR-N05 or approved equivalent.

Supply, installation, testing and commissioning of Dual Action Pull Station with addressable interface, built in bicolour LED with key reset facility, smooth dual action design, UL / LPCB listed. Make : HONEYWELL, MORLEY IAS, Model : MI /MCP/FLEX or approved equivalent.

Supply, installation, testing and commissioning of Response Indicator to give visual indication of detection of smoke - RED colour LED for indication. Make : Agni Suraksha, System Sensor or approved equivalent.

Supply, installation, testing and commissioning of 5 Loop Intelligent / Analogue Addressable Fire Alarm Panel Microprocessor based character display Network option built in Alarm, Trouble & supervisory relays LPCB listed. Make : HONEYWELL, MORLEY IAS, Model : ZX 5se or approved equivalent.

Supply, installation, testing and commissioning of Addressable Base Model Detectors, LPCB approved. Make : HONEYWELL, MORLEY IAS or approved equivalent.

Supply, installation, testing and commissioning of Intelligent Plug-in Photo Electric BEAM Detectors with LPCB approved. Make : HONEYWELL, MORLEY IAS, SYSTEM SENSOR

Wiring with 1100 V grade PVC insulated copper conductor in PVC / MS Conduit (conduits to be paid for seperately) : 2 x 1.5 sqmm

Supply and laying of approved quality PVC Conduit recessed in wall/ ceiling or surface-laid as per site requirement: 20 mm dia.

Size: Chair arm rest to arm rest: 21" standard, Side Stand: 3” iron Box upholstered with fabric. Armrest (Handle): PU. Leg: Chair leg will be fixed. Back Angle: 14 gauge. Chair seat: Sliding (Push Back), Inner material: Moulded PU. Seat: 50kgs/m3; Seat Back: 50kgs/m3; Push Bach Mechanism : 14 guage and 16 guage with no disturbing noise, All the iron parts will be powder coated. Inner structure: Ply frame in Seat and Iron Frame Seat Back. Upholstery fabric of Standard Quality. (Make:- Elite/ Wipro/ Godrej

SITC of Diffused /6500K; Article No.: Luminous flux (Luminaire): 2221 lm; Luminous flux (Lamps): 2220 lm; Luminaire Wattage: 22.0 W; Luminaire classification according to CIE: 100; CIE flux code: 52 83 97 100 100; Fitting: 1 x LED/6500K (Correction Factor 1.000).

SITC of Mirrored /4000K; Article No.: Luminous flux (Luminaire): 3963 lm; Luminous flux (Lamps): 3980 lm; Luminaire Wattage: 46.7 W; Luminaire classification according to CIE: 100; CIE flux code: 98 99 100 100 100; Fitting: 1 x LED40/4000K (Correction Factor 1.000).

SITC of QS device: International seeTouch QS 10-button with raise/lower wallstation. Two contact closure inputs via a connector onthe back of the wallstation. Unit dimensions with faceplate: (87 mm x 87 mm). Mounts in European and UK wallboxes. Similar to Lutron make QSWE-10BRLN-AW or equivalent at Council's Chamber.

SITC of Electrical Cables, PVC Conduits etc

Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including 6 Amp flush type switch/ bell push (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) GI/ MS switch board (ISI marked) with phenolic laminated sheet cover ,ceiling rose (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.) etc. complete. a) SP upto 3.00 metre length.

b) MP upto 6.00 metre length.

c) LP upto 10.00 metre length.

Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including 5 pin 6 Amps flush type plug socket and 6 Amps F/T switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete, when placed elsewhere. Short point up to 3.00 metre. length.

Medium point up to 6.00 metre. Length.

Long point up to 10.00 metre. Length.

Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch ( Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) 2.3.3 Long point up to 10.00 metre. Length.

Wiring for 5/6 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including and fixing 5/6 pin 16 Amps flush type socket outlets and 16 Amps flush type switch ( Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.), GI/ MS switch board (I.S.I. mark with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) 2.4.1 Extra long pt. upto 15.00 mtr. Length

Extra long pt. upto 20.00 mtr. Length

Extra long pt. upto 25.00 mtr. Length

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. 2.7.1 With 2x2.5 sqmm+ earth continuity with1x2.5 sqmm PVC insulated unsheathed single core copper conductor cable in 19mm dia.rigid PVC conduit pipes.

With 2x4sqmm+ earth continuity with1x2.5 sqmm PVC insulated unsheathed single core copper conductor cable in 19mm dia.rigid PVC conduit pipes.

With 2x6sqmm+ earth continuity with1x4 sqmm PVC insulated unsheathed single core copper conductor cable in 19mm dia.rigid PVC conduit pipes.

With 2 x 10 sq. mm. + earth continuity with 1x 6 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

With 2 x 16 sq. mm. + earth continuity with 1x 10 sq. mm. cable in 32 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including earth continuity in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system . 2.8.5 With 3 x 16 sq. mm. + earth continuity with2x 10 sq. mm. cable in 32 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for 5 pin 6 amp plug with 1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including 5 pin 6 amp socket outlet (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) and 6 amp flush type switch (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.)make) earthing the 3rd pin of the socket as required on the switch board in surface/ recessed P.V.C. conduit wiring system. When fitted on same board of light and fan.

Supplying and fixing of polished Brass Bracket of 18 S.W.G, 25 cm long cast back plate and brass lamp holder complete including connection as approved by the Deptt.)as required Without Lamp

Supplying,installation,testing and Commission of the following indoor surface Mounted LED Luminaires complete with all accessories such as driver etc. and necessary connection with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed by the department 10.2 Philips lighting luminaire 15W Cirrus Mini Model SM518C LED9S 6500 PSU OD GR/ SM518C LED9S 6500 PSU OD WH or equivalent as approved by the Deptt.

Supplying,installation,testing and Commission of the following indoor Recessed Mounted LED Luminaires complete with all accessories such as driver etc. In the flase ceiling type Armstronng /Gypsum or similar ceiling mouting with necessary support and connection with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed by the department 6.01 Philips lighting luminaire 15 W GreenLED Model BBS170 1xDLED -5000 PSU WH/ BBS170 1xDLED -4000 PSU WH or GreenLED Square ModelBBS175 1xDLED -5000 PSU WH/ BBS175 1xDLED -4000 PSU WH or equivalent as approved by the Deptt.

Supplying and fixing of Call bell ( Buzzer ) including 5/ 6 amp capacity button piano type bell push switch including connection as approved by the Deptt.)as required.

Supplying,installation,testing and Commission of the following indoor Surface Mounted and Suspended Luminaires LED Luminaires complete with all accessories such as driver etc. and necessary connection with 1.5 sq.mm. P.V.C. insulated S.C.copper conductor as required and as directed by the department 11.5 Philips 24 W, Astra Surface & wall mounted LED batten Model BN150W LED20S-6500 PSE OD GR or equivalent as approved by the Deptt.

Supplying,installation,testing and Commission of the following LED lamp as directed by the department 12.25 Philips LED bulbs non-dimmable 7 W or equivalent as approved by the Deptt.

Supplying with fitting and fixing of Foot lamp with Box and lamp holder in 3 module recessed system MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department. Without lamp.

Installation of earth station with 40mm dia and 4.5 mtr. long GI pipe with necessary GI reducing socket 40mmx20mm size locking arrangement with hinged cover plate, funnel, GI nuts, thorough bolts etc.for putting pipe and refitting with necessary enclosure on the top etc. as required complete.

Extra for using salt 5Kg and charcoal 64 Kg. for pipe earth electrode as required.

Supplying and laying with 6 SWG GI earth wire at 0.50 mtr. below ground level or conductor earth electrode including soldering, excavation work and refitting etc.as required complete.

Supply, fitting & fixing 20 mmx3 mm Copper strips drawn on vertically or horizontally on building wall/parapet wall in surface system complete with supply of Brass Nuts & Bolts, Screws etc including riveting, soldering and making connection as approved by the Deptt.)with earth electrode copper strips and Lightning Arrestor etc. as specified and directed by the deptt.

Supplying including fitting fixing of following A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department [Without regulator]. 27.1.2 Premium model 1200 mm Sweep (ORIENT PSPO make) / Premium model 1050 / 1200 mm Sweep SS-390 Deco Havells make)

Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department. 27.2.1.2 Power Flow 225 mm sweep (ORIENT make)

Supplying including fitting fixing of following A.C. Wall fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department. 27.3.1 ORIENT make or equivalent Usha make 27.3.1.2 Air Circulator wall fan 600 mm sweep Turbo force

Supplying with fitting and fixing of electronic modular fan speed controller 2 - module type MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department. SB8 . 21.1 100 watt electronic modular 4 step speed control 2 - module type

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 15.2.1 ABB, Schneider MG, legrand, Hager make) 15.2.1.3 8 way SPN double door

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 15.8.1 ABB, Schneider MG, legrand, Hager make) 15.8.1.2 6way TPN (4+18) double door

Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 16.1.2 C Series (Schneider MG, legrand, Hager make) 16.1.2.1 6-32A

Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 16.6.2 C Series (ABB, Schneider MG, legrand, Hager make) 16.6.2.3 63A

Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 16.7.1 30mA sensitivity DP RCCB (ABB, Schneider MG, legrand, Hager make) 16.7.1.2 40A

Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz 4P RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 16.8.2 100/300mA sensitivity 4P RCCB (ABB, Schneider MG, legrand, Hager make) 16.8.2.3 63A

Supplying with fitting and fixing panel mounting open execution 25 KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved by the Deptt.),as specified and directed by the deptt. 25 KA 415V 50 Hz 3P MCCB (Havells, HPL, Indo Asian make) i)63A

Supplying with fitting and fixing panel mounting open execution 35/36KA 415V 50Hz 3P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 16.41.1 35/36 KA 415V 50 Hz 3P MCCB (C&S, Havells, Indo Asian, HPL, V-Guard or equivalent make as approved by the Deptt.) 16.41.1.2 250A

Supplying including installation testing and commissioning of 100kVAr, 440V APFC Panel Non-Compartmentalized Type, Free Standing, Floor Mounted rated Output 100kVAr rated Voltage 440V rated Frequency 50Hz Number of phases 3 Phase Switching Option Auto-Manual ENCLOSURE DETAILS Material CRCA Thickness of sheet steel Frame & Doors: 2.0mm, Partitions: 1.6mm, Gland plate: 3.0mm Dimensions W x H x D (mm) 800 x 1800 x 600 (Approx) + (250 mm for plinth & fan hook Ingress Protection IP 42 Installation Type Indoor Cable Entry Bottom Colour RAL 7035 - Light Grey BUSBAR DETAILS Material Aluminium Cross Section (mm) 40 x 10 x 1 Run Bus bar Supports DMC Moulded CAPACITORS Heavy Duty @ 440V No of Steps 5 Incomer MCCB, 200A, 36kA CVS Type Switching Capacitor Duty Contactors Step Protection MCB/MCCB APFC RELAY INCOMER MCCB, 200A, 36kA CVS Type 1 Digital Volt - Amp Freq meter 1 Phase Indicating Lamps (L1, L2, L3) 3 Current Transformer - 200/5A 3 APFC Relay 1 Fans 1 Control Circuit Protection - MCB 2 Step Indicating Lamps 10 On / Off push buttons 10 Step protection - MCCB, CVS Type, 25kA - 100A 1

Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . 32.1.3 3&1/2core A2XFY 32.1.3.4 70.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

150.00 Sq. mm.3 & 1/2 Core armoured U.G. cable

Supply and laying of following size Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988, LT armoured U.G. cable laid in pucca flooring, road crossing, drain crossing as per site requirement and partially in air to connection as approved by the Depts. the control switch, through medium duty G.I. pipe (Tata/ Nezone make or equivalent as approved by the Deptt) bend and socket including excavation and refilling the trench and making good damage done as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) 32.5.3 3&1/2core A2XWY,A2XFY 32.5.3.4 70.00 Sq.mm 3&1/2 Core U.G. cable in 50mm dia medium duty hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.)

150.00 Sq.mm 3&1/2 Core U.G. cable in 65mm dia medium duty hot dip galvanised pipe (AKG or equivalent as approved by the Deptt.)

Supplying installation, testing and commissioning of 10 passenger (680 Kg.)/ lifts having contract speed of 1 MPS serving different floors in the lift shaft as per detailed specification enclosed and as under: 1. No. of Elevators - 1 No. 2. Type Passenger Elevator 3. Capacity Passenger -10 Persons - 680 Kg 4. Speed 1.0 Metre/Sec (approx.) 5. Type of Drive Variable Voltage Variable Frequency Drive with Microprocessor based Simplex Full Collective Control 6. Location of Machine Room Top 7. Available Travel 12.8 Metres. (Maximum) 8. Serving Ground Floor to 4th Floor 5 Stops 5 Levels 5 Openings 9. Well Size (Required) 1875 mm Wide x 2000 Deep (over plaster) 10. Power Supply 415 V three-phase 50 cycles AC 11. Auxiliary Required Single-phase 220 V 50 cycles AC 12. Car Size (Clear Inside 1300 mm Wide x 1350 mm Deep approx. 13. Required Pit Depth 1600 mm (Mandatory) 14. Required Head Room 4800 mm. 15. Car Enclosure Stainless Steel Car-SS4 16. Flooring PVC Flooring 17. Electric Light Fluorescent Light Fittings 18. Fan 300 mm/ 400 mm sweep 1 No. 19. No. of Entrances One Location - Front. 20. Car Entrance Automatic Power operated Centre Opening Stainless Steel Door-SS4 21. Landing Entrance Automatic Power operated Centre Opening Stainless Steel Door -SS4 22. Clear Opening 800 mm Wide x 2000 mm High 23. Indicators: Car & Landings Direction & Position Indicator 24. Other Features Battery Operated Emergency Alarm and Light. OSG Electronic Switch. Call Registration LEDS . 2 Station Intercom System Infra-red Light Curtain Door Safety. KONE Rescue Device. Lift Announcement System.

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting TPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. 15.8.1 ABB, Schneider MG, legrand, Hager make) 15.8.1.1 4way TPN (4+12) double door

Wiring to 5 pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete. SB 2.12.2 Medium point up to 6.00 metre. Length.

Wiring for 5 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 2 mm thick 20 mm. dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) SB 2.13.2 Medium point up to 6.00 metre. Length.

Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) cable in surface/ recessed PVC 2 mm thick rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system. SB 2.6.1 With 2 x 1.5 sq. mm. cable in 20 mm dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) with earth continuity in surface/ recessed 2 mm thick rigid low halogen SFT PVC IS: 9537 Part - III conduit wiring system. SB. 2.7.1 (a) with 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit.

b) with 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. in 20 mm. dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit

Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in surface/ recessed system complete as per direction of department. SB.8.13.3 4 module type Metal

6 module type Metal

Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. SB.8.14.4 4 module

6 module

Supplying including installation of socket outlet 10 Amps 3 pin combine shuttered complete , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying with fitting fixing of 6/10 amp one way modular clip in switch, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying including installation of socket outlet 10/16 Amps 3/5 pin combine shuttered complete , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying with fitting fixing of 16 amp one way modular clip in switch, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department.

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) 15.6.1.4 12 way SPN double door

Supplying installation, testing, programming and commissioning of Audio and video equipment, 4300 Lm WUXGA Installation Projector , 4300 lumens 3LCD Projector 2000:1 Contrast Ratio Native WUXGA (1920 x 1200) Resolution Up to 4000h , 3 LCD System .

Supplying installation, testing, programming and commissioning of Audio and video equipment, Motorised screen with RF remote control , Size -8 Ft / 6 Ft , 4:3 Aspect Ratio

Supplying installation of Projector ceiling Mount

Supplying installation, testing, programming and commissioning of video equipment, Mini Coax High−Resolution Cable , COAX CENTER CONDUCTOR: 28 AWG 7/36 tinned copper , Kramer (or equivalent as approved by the Deptt.)

Supplying, including Installation , Testing , Commissioning & Programming of VGA ,Composite Video , Stereo audio & Power Table POP up unit as per Technical specification Durable pneumatic movement and mechanical latching mechanism, built-in Extender video and audio line driver , One female 15-pin HD connector and 3.5 mm mini stereo audio jack , Two CAT 6 RJ-45 network/data/phone connectors; unswitched AC outlet , Two CAT 6 RJ-45 network/data/phone connectors; unswitched AC outlet , Compact size with square bezel

APW Flexi box Wall mount Rack 15U 19"X 500mmD Networking Wall mount Rack with Front Tinted Glass Door with Lock "PDU 6*5A - 01 Nos. Fan 90 cfm 230V - 01 Nos. Mounting Hardware (Set of 10) - 1 Set 19"" 1U Cable Manager - 1 Nos."

Supplying installation, testing, programming and commissioning of Audio equipment, Rugged 30 cm gooseneck or equivalent as approved by the Depts. with integrated 5‐pin XLR connection (or equivalent as approved by the Deptt.) & phantom power adapter, provides 2 additional pins for LED control & programmable on off switch AKG or equivalent as approved by the Deptt.)

Supplying installation, testing, programming and commissioning of Audio equipment, Analogue mic / line input, 8 analog output, networked signal processor with 12 independent EEC algorithms, telephone hybrid and fault ‐ tolerance. BSS (or equivalent as approved by the Deptt.)

Supplying installation, testing, programming and commissioning of Audio equipment,8‐channel analog break‐in box with fault‐tolerant bus and switchable Phantom Power per channel (half rack width / desk mount version) ‐ includes external power supply BSS (or equivalent as approved by the Deptt.)

Supplying installation, testing, programming and commissioning of Audio equipment, 8 Channel Power Amplifier, 125 W per channel @ 8 ohms

Supplying installation, testing, programming and commissioning of Audio equipment, Balanced double shielded digital & analogue audio cable , JACKET - PVC, Ø 6.0mm, purple , Conductor - trended tinned copper cables 7 x 0.25 mm (0.34mm²) Gotham (or equivalent as approved by the Deptt.)

Supplying installation, testing, programming and commissioning of Audio equipment, Premium Monitor Speaker. 5.25" Two‐Way Vented System, Highly Weather Resistant with Indoor/Outdoor, Stainless Steel Grille, 100° x 100° Coverage, 200 W Program Power, 70V/100V taps of 60W, 30W and 15W (and 7.5 W at 70V), plus 8 ohm Thru, Built‐In Invisible® Installation System. Includes MTC‐PC Sealed‐Entrance Panel Cover.

Supplying installation, testing, programming and commissioning of Audio equipment, Frequency agile cable less microphone system including SR45 Stationary Receiver, PT45 Pocket Transmitter, SMPS Switched Mode Power Supply (EU/US/UK), CK99 Livelier Microphone, 1 AA Battery

Supplying installation, testing, programming and commissioning of Audio equipment, High flexible Speaker cable for power amplifiers up to 4000 watts , Jacket - PVC, ø 0.37 in, black ,Conductor resistance = < 1.42 Ohm /1000 ft , Conductor - Stranded bare copper cables, 25x38 AWG (24AW

Supplying installation, testing, programming and commissioning of video equipment,14 Conductor Presentation/VGA Cable , CONDUCTOR: 26 AWG 7/34 tinned copper , CENTER CONDUCTOR: 0.48mm (0.019in).

Supplying installation, testing, programming and commissioning of Audio equipment,XLR Male Cable connection

Supplying installation, testing, programming and commissioning of Audio equipment,XLR Female Supplying installation, testing, programming and commissioning of Audio equipment, Cable connection Neutrik (or equivalent as approved by the Deptt.)

Supplying installation, testing, programming and commissioning of Audio equipment,Screw‐on cardioids microphone capsule module, only for GN / HM modules AKG or equivalent as approved by the Deptt.)

Supplying installation, testing, programming and commissioning of Audio equipment, cable less handheld microphone system, SR450 stationary receiver, HT450/D5 handheld transmitter, D5 microphone element, microphone stand, LR6 AA battery, power supply and rack mount unit included

Supplying installation, testing, programming and commissioning of Audio equipment, CS5 Conference system‐ System Cable ‐ Cat5 2,5m with RJ45 connection (or equivalent as approved by the Deptt.) AKG or equivalent as approved by the Deptt.)

Supplying with fitting and fixing Servo controlled power stabilizer of the following specification complete including making necessary connection as approved, specified and directed by the deptt. Input range 170 - 270V/Input range 160 - 265V, Output range 230± 0.5% 31.3.6 2 KVA

Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) complete Short point up to 3.00 metre. length.

Medium point up to 6.00 metre. Length.

Long point up to 10.00 metre. Length.

Supplying including installation of socket outlet 6 Amps 3 pin universal combine shuttered complete , MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.

Supplying including installation of socket outlet 6/16 Amps 3/5 pin combine shuttered complete , MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.

Supplying with fitting and fixing of 6 amp one way modular clip in switch, MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.

Supplying with fitting and fixing of 16 amp one way modular clip in switch with LED, MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department.

Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system. With 2 x 1.5 sq. mm. cable in 20 mm dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system. With 4 x 10 sq. mm. + earth continuity with 2x6 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

With 4 x 16 sq. mm. + earth continuity with 2x10 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit.

Supplying including fitting and fixing of following Metal boxes for MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE in surface/ recessed system complete as per direction of department. 3 module type Metal

4-5 module type Metal

6-8 module type Metal

Supplying including fitting and fixing of following front plate of suitable colour MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE as per direction of department. 3 module

4 module

5 module

Supplying with fitting and fixing of blank plate single in modular switch system MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE complete as per direction of department.

Supply, installation & testing of Copper Plate earth station with 600 mmx600 mmx3 mm copper earth plate with necessary 40 mm dia. G.I. medium duty watering pipe with G.I. Fittings such as Socket, Tee, elbow, nipple and 50 mmx40 mm G.I. reducing socket for funnel including locking arrangement with 300 mmx300 mmx6 mm C.I. hinged cover plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt .

Extra for using salt (5 K and Charcoal (96 K in G.I./Copper plate Earth Station pit to provide low impedance ground in location of high soil resistivity as and when required and specified by the deptt .

Supplying & laying of 25x4 mm size Copper strips drawn on surface from earth electrode to Electrical switch gears, machineries etc complete with supply of Brass nuts & bolts, screws etc including riveting, soldering & making necessary connection as approved, specified and directed by the deptt.

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door (IP-43) surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. (ABB, Schneider MG, legrand, Hager, Crabtree xpro make) 12 way SPN double door

Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting vertical TPN MCB DB incorporated with bas-bar 125A, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. ABB, Schneider MG, legrand, Hager make) 4 way TPN (8+12) double door

C Series (ABB, Schneider MG, legrand, Hager, Crabtree xpro make) 6 to 32A

Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 100/300mA sensitivity DP RCCB (ABB, Schneider MG, legrand, Hager make) 40A

Supplying with fitting and fixing panel mounting open execution 25KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. 25 KA 415V 50 Hz 4P MCCB (Schneider, legrand, Siemens, Indo Asian make) 40A

Carrier Aircon make estrella/ Mitsubishi make Starmex Series Model MS-13+MU-13, Rotary type compressor/ Mitsubishi make Heavy duty Model MS - E13VC + MU - E 13 VC with rotary compressor/ Blue Star make Model 5HW12DBF1/ Model 5HW12ZBW/ Model 5HW12ZBS/ Model 5HW12ZBG/ Model 5HW12ZBR/ Carrier Aircon make estrella R410 ECBC 7.2.2 1 Ton capacity with rotary compressor ECBC 7.2.2.1 Mitsubishi make Heavy duty Hybrid AC Model MSH - GE 35 - VB + MUH - GE 35 - VB

Supplying with installation testing and commissioning of Hi -- wall 5 STAR rating non ducted split type air conditioner of the following capacity with cordless remote complete with copper pipe and electrical connection cable, as approved by the Deptt.)up to 5 m between the room unit and out door unit as directed by the department. ECBC 7.4.1.7 Mitsubishi make Heavy duty Hybrid AC Model MSH - GE 60 - VB + MUH - GE 60 - VB

Supplying with fitting and fixing Voltage stabilizer of the following specification complete including making necessary connection as approved, specified and directed by the deptt. (SKYLAND / Vee-Dee / V GUARD / VERTEX/ INDO/ VENUS make) 3.0 KVA Automatic Input 90-280 V Out put 200-240 V

4.0 KVA Automatic Input 90-280 V Out put 200-240 V

Supplying with fitting and fixing of Single Phase Modular Motor Starter switch MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department. Overload Relay Range 9 - 15 Amps in 3 Module

Overload Relay Range 16 - 25 Amps in 3 Module

Supply, installation, testing & commissioning of Air cooled Floor mounted packaged type Air conditioners suitable for refrigerant R22/R407C with indoor unit consisting of hermetically sealed imported power efficient Scroll compressors and evaporator coil, blower fan, motor, air filter. The condenser shall consist of condensing coil and, fan and motor. The control system shall be microprocessor bases with following safety inbuilt: HP/LP cut-out, SPPR (protection against single phasing & reverse polarity) In-built thermal/temperature protection. Microprocessor controller is provided with following features: Auto switch on or off of compressors memory back up of settings Auto restart after power failure Runtime equalisation of the compressors Built-in time delay to protect compressors Fault diagnostics to facilities speedy correction The cost of the machines will also include 20G hard drawn copper refrigerant piping properly saddles using wall spacers CPVC condensate drain piping including U Trap properly saddled, ( Fire Retardant Canvas Cloth duct connection as approved by the Deptt., ( Electrical interconnection as approved by the Deptt.)between IDU & ODU using ISI marked cables in 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit properly saddled, ( Nitrogen pressure testing of refrigerant circuit, ( Refrigerant Gas Charging ensuring optimum performance, etc complete in all respects "make)s Approved Bluestar, Voltas, Carrier, Hitachi, Daikin, Mitsubishi. 29.8.5 22 Tr

Low side work (air side related to installation of duct able/packaged type air conditioners including the following work: GI Ducting as per approved drawing. The ducting will be made as per IS655. Only Tata and Sail Galvanised plain sheets will be used, Duct acoustic lining inside the firmst 4-5 metres of the duct using10mm open cell nit rile acoustic insulation sheet of Arm cell Microbar or equiv. Duct thermal insulation on the entire duct length using 12mm thick O class nit rile insulation (when the duct is passing through conditioned are Wherever the duct is passing through unconditioned space, it will be insulated with 2 layers of 12mm thick O class nit rile insulation and then finally covered with Fibreglass Mat and 2 coats of UV paint be applied as finishing. All air terminals will be provided with alum. Collar dampers & aluminium powder coated grills and diffusers.

Supplying fitting fixing and connection as approved by the Deptt.)1/2 inch & 3/4 inch copper piping with insulation along with connection as approved by the Deptt.)cable including testing and commissioning as directed by the department.