Providing Rewiring in Type 4 set No. 22 Kasumpti Shimla-9.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Group B

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in FRLSont including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required.

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated isheet cover in FRLSont including providing and fixing 6 pin 5/6 & 15/16 A socket ou tletand 15/16 A piano type switch, connection, painting etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and fixing Higher Rating (50 to 63 A) 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Double pole 40 amp

Double pole 50/63 Amps

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

8 way, Double door

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

Providing and installation of following type of Decorative LED bulb with aluminium housing, anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including mounting clips & loop in loop out wire, connections, testing and commissioning etc. as required. Make: Philips, Syska, GE, Bajaj, C&S, Jaguar, or any other approved by Engineer-in-Charge.

Led Bulb18 watt

Providing and installation of following type of LED Batten with polycarbonate housing ,anti glare polycarbonate diffuser, complete with all accessories, connections, testing etc. as required of Approved Make Philips, havells ,Wipro , Bajaj, Panasonic, Goldmedal & Chengi. as per following specification.

Wattage of LED fittings- As per following parameters

Total lumens of the LED fittings- as per individual fittings mention below

Diffuser-polycarbonate diffuser/PMMA

Operating voltage-140V to 270V, AC supply

Input frequency-50 Hz + 1 Hz

Power factor-Minimum 0.90

Luminaire efficacy->100 lm/w

Color rendering index-CRI shall be greater than 80

Working/ operating temperature-0 to + 45c or better

Color temperature-6000K to 10%

Electronic Driver

Drive current (LED)-As per OEM.

Operating voltage-140 V to 270 V AC supply or better

Type of driver-Constant current output driver

THD-Less than 10%

Surge Protection-2.5 KV minimum

Efficiency Driver->85%

Protection-Shall have under voltage and over voltage protection.

Guarantee of LED fittings including LED driver-2 years against manufacturing defect.

Fixture-Should comply with LM 79 test from NABL/UL lab.

LED Type/ Make/ Model-Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 25000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer.

Life of LED-25000 burning hours at 70% lumen maintenance

LED Batten Light >2000 Lumens.

LED Batten Light >1000 Lumens.

S/E of LED Downlighter surface square with CRCA/PDC body and diffuser The fitting should be installed on existing surface The job includes carriage, erection, making connections testing and commissioning of the fittings.

Wattage of LED fittings- As per following parameters

Total lumens of the LED fittings- as per individual fittings mention below

Body of fittings-CRCA steel sheet with opal acrylic diffuser/ Extruded al. Housing CRCA front frame opal diffuser/CRCA power coated housing with high efficiency translucent diffuser.

Operating voltage-150 V to 265 V, AC supply or better.

Input frequency-50 Hz + 1 Hz

Power factor-Minimum 0.95

Luminaire efficacy->100 lm/w

Color rendering index-CRI shall be 80 (minimum)

Working/ operating temperature-0 to + 45c or better

Color temperature-6000K to 6500K

Electronic Driver

Drive current (LED)-As per OEM.

Operating voltage-150 V to 265 V AC supply or better

Type of driver-Constant current output driver

THD-Less than 10%

Surge Protection-2.5 KV minimum

Efficiency Driver->85%

Protection-Shall have under voltage and over voltage protection.

Guarantee of LED fittings including LED driver-2 years against manufacturing defect.

Fixture-Should comply with LM 79 test from NABL/UL lab.

LED Type/ Make/ Model-Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 50,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer.

Life of LED-50000 burning hours at 70% lumen maintenance

Round LED Down Light Surface > 2400 Lumens.

Round LED Down Light Surface > 2000 Lumens.

S/E of LED bulk head IP 66 rated with aluminium body/PDC housing The fitting should be installed on existing surface The job includes carriage, erection, making connections testing and commissioning of the fittings.

LED 10 watt

supply installation testing and commisioning of chandelier having suitable capacity Chandelier Chain to bear the load of lumanire and should be asthetically appealing,Chandelier Arm should be able to bear the load of glasses and crystals attached having suitable size of bottom bowl to have the concentration of wire in a single place , space for suitable size of LED bulbs, conventional bulbs.Rest should be as per the satisfaction of engineer in charge Chandelier with chrome finishing circular with minimum downward projection/hang make jaguar ,philips, K lite or any other make approved by engineer in charge

Installation of ventilatinmg /exhaust fan in the existing opening, including making good BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor the damage, connection, testing, commissioning etc. as required.Supply & Erection of Ventilating Fan ) following size complete with motor,, with minimum power consumption, rigid frame with rubber mounting for silent operation, in the existing opening including cost of making the hole to suit the size of above fan making good the damage, Carriage Charges connection, testing, commissioning etc. as required to complete the job to the entire satisfaction of ENC.

200 mm sweep

Providing and installation exhaust fan of following sizes in the existing opening,Double ball bearing type metal frame including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required: of Approved Make Domestic type

230mm sweep

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes with 8 bar pressure rating ,5 star BEE rating and safety valve. installation by means of expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, making good the damages, electrical connections, testing etc. complete as required

6 litres

25 litres

Conditions:-

Rates should be quoted for all heights including all leads and lifts for internal and external works for all floor levels.

Useful materials should be handed over to the Assistant Engineer Electrical Sub Division No.II, Sectt. Shimla, otherwise credit for useful materials will be charged.

Sample of all the material to be used on work shall be got approved from the Engineer-in-charge in advance before actual use on work and any or all of the material which are available as per Indian standard in the market should confirm to bureau of indian standards.

It is certify that the tender is being called on emergentnature in exigency of Public insterest.

Condition:- The Credit for old dismantled material will be recovered from the contractor on L/S basis @ Rs.1100/- Only.