Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.0 LAccepted-AOC | L1 | Accepted-AOC BEING L1 AND OVERALL REASONABLE | |
| 2 | L2₹37.4 L+₹3.4 L (10.1%)Rejected-Finance | L2 | Rejected-Finance BEING NOT L1 | |
| 3 | L3₹38.0 L+₹4.0 L (11.8%)Rejected-Finance 203 NIVAAN LAXMI SOCIETY PLOT NO 169 SECTOR 19 KHARGAHAR NAVI MUMBAI 410210 | RAIGAD | MAHARASHTRA | 410210 | L3 | Rejected-Finance BEING NOT L1 | |
| 4 | L4₹38.9 L+₹5.0 L (14.7%)Rejected-Finance | L4 | Rejected-Finance BEING NOT L1 | |
| 5 | L5₹39.2 L+₹5.2 L (15.4%)Rejected-Finance | L5 | Rejected-Finance BEING NOT L1 |
Tender Value
₹50.0 L
EMD Value
₹1 L
Closing Date
21 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (NW) KARANJA
NAVAL STATION KARANJA, URAN, RAIGAD, MAHARASHTRA
REPAIRS TO JOINERY WORKS AT OFFICERS MD ACCN AT NOFRA UNDER AGE B/R-I AT NAVAL STATION KARANJA
2022_MES_565444_1
8609/E8
Open Tender
Civil Works
Item Rate
270 days
GE (NW) KARANJA
REPAIRS TO JOINERY WORKS AT OFFICERS MD ACCN AT NOFRA UNDER AGE B/R-I AT NAVAL STATION KARANJA
8 documents required · 8 mandatory
₹500
Yes
GE (NW) KARANJA
₹1 L
Yes
2 Mar 2023
26 Nov 2022
23 Dec 2022
26 Nov 2022
21 Dec 2022
10 Dec 2022
26 Nov 2022 - 10 Dec 2022
Amount
Taking down chowkhats or frames including shutter (without taking off shutters from the frame) area n exc. 1.5 Sqm each. complete all as specified and directed.
All as per BOQ item no. 1.00 above but exc 1.50 Sqm n.exc 4 Sqm. complete all as specified and directed.
Taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed.
Taking down shutters of any description n exc 1 sqm each complete all as specified and directed.
Taking down shutters of any description exc 1 sqm and n exc 2 sqm each and refixing in same opening incl easing, adjusting etc complete all as specified and directed.
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.
M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado/window & pillar over 10mm thick plaster in CM (1:3) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDMrubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and directed.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed.
S&F Aluminium anodised grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC15) of approved design/pattern(DG 104), with approved standard section and fixed to existing window frame with CP brass/stainles steel screwnot less than 50mm and @ 200mm c/c, incl cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised alu standard section ( 28mm x 19mm x 2mm thick)around the opening, complete all as specified and directed.
S&F 4 mm thick sheet glass ordinary quality and glazing complete in square exc 0.50sqm each complete all as specified and directed.
S&F 4 mm thick sheet glass ordinary quality and glazing in square n exc 0.50sqm each complete all as specified and directed.
S&F in repairs 4 mm thick sheet glass ordinary quality and glazing in square exc 0.50sqm each complete all as specified and directed.
S&F in repairs 4 mm thick sheet glass ordinary quality and glazing in square n exc 0.50sqm each complete all as specified and directed.
S&F 4mm thick frosted glass, ordinary quality and glazing with oil putty of any size pane complete all as specified and directed.
S&F Aluminium louvers with levers and locking arrangement suitable for fixing 100mm wide 4 to 6 nos glass complete all as specified and directed.
M&L 2nd class HW, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chanbered, put together with glue pinned at joints complete all as specified and directed.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm(double rebat) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete all as specified and directed. NOTE: Stainless steel dash fastners shall be measured and paid separately.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). NOTE: Stainless steel dash fastners shall be measured and paid separately.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete all as specified and directed.. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). NOTE: Stainless steel dash fastners shall be measured and paid separately.
S&F 150mm long and 12mm dia stainless steel fasteners with round shape head complete all as specified and directed.
S&F 35mm thick second class hardwood plain, framed, factory made panelled shutter(two panel) with lock rail and panel of 9 mm B.W.P. commercial veneering particle board on both faces. The size of rail and stile as per IS : 1003(Part-1), kiln in seasoned and chemically pressure treated complete all as specified and directed.
S&F 35mm thick 2nd class HW, glazed and skelton shutters open rebated and prepared to receive glass / gauge (without sash bar) edges of forming plain chamfered sorrounded fitted with cut and mitred bead for securing glass / gauge etc size of shutter as per SSR part-1 section 8 clause 8.24(a) complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30mm (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded wood grain printed PVC sheet used 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90o) used instead of exposed portion of PVC sheet beading panelling of wood grain printed PVC sheets to be fitted in the MS frame welded sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supling & fixing in the frame at the site complete all as specified and directed.
S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube and edges will be painted to match with printed sheet fixing in opending as per specification and drawing etc complete all as specified and directed.
S&F MS butt hinges100mm long medium weight, cold rolled complete all as specified and directed.
S&F in repairs MS butt hinges100mm long medium weight, cold rolled complete all as specified and directed.
S&F 100 mm long ,Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.
S&F in repairs 100 mm long ,Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.
S&F 125 mm long extruded aluminum alloy handles, fabricated type, anodised complete all as specified and directed.
S&F in repairs 125 mm long extruded aluminum alloy handles, fabricated type, anodised complete all as specified and directed.
S&F 150 mm long extruded aluminum alloy handles, fabricated type, anodised complete all as specified and directed.
S&F in repairs 150 mm long extruded aluminum alloy handles, fabricated type, anodised complete all as specified and directed.
S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.
S&F in repairs 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.
S&F 150mm long Aluminium,anodized barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F in repairs150mm long Aluminium,anodized barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F 200mm long Aluminium,anodized barrel tower bolts of extruded section and fixed complete all as specified and directed.
S&F in repairs 200mm long Aluminium,anodized barrel tower bolts of extruded section and fixed complete all as specified and directed.
M&L Preparation of new wooden surfaces over 10cm width or girth, and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L Preparation of old wooden surfaces over 10cm width or girth, and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and directed.
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
M&L 20 mm thick polymer modified ready mix cement based plaster on external surfaces complete all as specified and directed.
M & L 15 mm thick ready mixed cement base plaster on internal surfaces on brick or concrete surfaces complete all as specified and directed.
M & L for preparation of newly or untreated plastered surface of walls applying two coats of oil bound distemper (OBD) over a coat alkali resistant primer complete all as specified and directed.
M&L for for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.
S&F in repairs Aluminium anodised alloy curtain rails 20mm dia fixing with brackets, stops, rollers hooks ,and both end of lattu etc complete all as specified and directed.
Dismantling wall and celling boards (fibers pulp insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed.
S&F 12 mm thick Pre-laminated particle board, exterior grade, prelaminated on both side with decorative choice lamination and other side balancing white lamination including fixing of teak wood beading on open edges in any position such as cup boards, drawers shutters etc. fixed with screws and incl all fittings, tower bolt, handle, knob, magnet to timber frame work complete all as specified and directed.
S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 andresistance to pread of flame of Class A category withproperty of being ermite/borer proof, water/moisture proof and fire retardant. PC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.
Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles and removing debris and depositing complete all as specified and as directed.
M&L Glazed ceramic coloured tiles, of size 300x200x7mm/400x200x7mm thick on vertical surfaces such as skirtinh/dado/risers etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment match the colour of tiles with and incl 10mm thick backing coat in CM 1:4 complete all as specified and directed.
Dismantling of stone slabs and tiles of any description or thickness in any position laid bedded and pointing in any morter complete all as specified and as directed.
INDIA ENGINEERS AND CONTRACTORS
BALAJI TRADERS
LAXMI ENTERPRISES
M/S Rana Enterprises
Mahadev Enterprises
S N TRADERS
M/s S.D Construction Co
D.N.PATIL
Bidder Name
M/S Rana Enterprises
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .