Renovation and laying tiles in the office complex of Hoshiarpur canal and dam circle

Amount

Mazdoor (Semi Skilled) (upper)

Removing Doors and Windows (steel or wood ) with chowkots by making recesses in walls when the wall is not to be dismantled ((a)) Doors of area 3 sqm and below.

Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones (a)Size 600x600 mm

Providing and laying Tactile Flooring Full body vitrified ,low water absorption below 5% having excellent slip resistance ,very dense , durable ,durable and abrasion resistant, solid through colour ,fade proof ,highly chemical and stain resistance unglazed finish porcelain tile of size 300mm x300mmx10mm + 5mm thick,approved profile design,Tec-button/Tec-Liner in ordinary grey cement and on 20mm thick bed of cement mortar 1:3 filling neat cement slurry between joints with white cement containin g pigment to match the shade complete in all respect .(tile design and pattern will be as per guidelines issued for persons with disability)

Grouting the joints of flooring tiles having joints of 3 mm width, using 2mm to 3 mm gap using spacers and later this gap to be filled with cement based grout ) with Cement base grout and matching pigments etc., complete, including filling / grouting and finishing complete as per direction of Engineer-in-charge. 600x600mm

Providing and applying Anti Termite Treatment using post constructional chemical treatment measures as per IS - 6313 - 2001 ( Part 3 ) & using Chemical containg chloropyrifos systemic insecticide diluted to manufacturers specifications by drilling holes in the floor slab & along skirting 300 mm apart & 12 mm dia, drilling holes along all possible entry points such as junctions of floor and walls, door frames, sewage lines, entry points , etc. & injecting them with the chemical solution.

Supply and fixing of Single core Wire 1.5mm (each roll of 90 m) (5red,5black)

Supply and fixing of Single core Wire 2.5mm (each roll of 90 m)(2 red,2black)

Supply and fixing of Single core Wire 6 mm (each roll of 90 m)(2RED,3BLACK)

Providing and fixing LED Battens light

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In Charge. (Glazing and paneling to be paid for separately) : (a) For fixed portion and chawkhats

(b) For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required

Cost of aluminum fittings complete for doors, windows such as tower bolts, handles, Stoppers and screw etc. for these fittings (Excluding sliding bolt) (ii) For shutter area above 0.50 sqm)

Removing Doors and windows together with the dismantling of walls (i) Doors

(ii) Windows

Teak Wood chowkats including iron hold fasts, corner straps, iron hinges, cleats, stops , wooden knobs or handles fixed in position (B) Double Rebate (60x150mm)

Providing and fixing Bright finished brass Door latch with necessary screws etc. complete : 300x16x5mm

Cost of aluminium fittings complete for doors,windows such as tower bolts, handles,stoppers and screws etc. for these fittings(Excluding sliding bolt) (ii) For shutter area above 0.50 Sqm)

Providing and fixing glass panels with nails and putty or wooden strip complete in all respect . Glazing area above 0.09 sqm. 4mm thick or 10.78 kg/sqm

Providing and fixing Hydraulic Door Closer ISI Mark With necessary screw etc. complete (c ) ISI Designation No. III Size of door 851mm to 1000mm)

Curtain Rod 25mm dia aluminium pipe with brackets fixed in position including nails and screws etc. (Teak Wood)

Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code:IS 2202-1(1999)) . Commercial with Elm or Gurjan facing on both \ Sides with laminated core and lipped edges: 30 mm thick

Providing and fixing aluminum Wire Mesh including cost of necessary fittings i.e. screws,u Type Beading etc. complete

Teak Wood Doors shutter and Windows panelled glazed or panelled including iron hinger, screws etc. complete fixed in position (excluding cost of tower bolts and handles but including labour for fittings the same) (Single leaf) (b) 30mm thick

Preparation of plywood Surface For painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead ,linseed oil, varnish, and chalk mitti including finishing the surface to required finish complete

Applying pink primer or aluminium priming coat on wood work including preparation of surface knotting and stopping etc.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, mettalic or plastered ,concrete surface to give an even shade

Applying Priming Coat with metal primer on new steel or iron work including preparation of surface

Fixing chowkhats in existing opening including embedding chowkhats in floors or walls, cutting masonry for hold fasts embedding hold fasts in cement concrete holes with cement concrete 1:3:6, painting two coats of bitumen to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 m lead (a)Door chowkhats (1.22 m x 2.06 m)

(b) Window chowkhats size 1.52mx1.22m

Mazdoor (Semi Skilled) (upper)

Dismantling Brickwork Tile,Masonary or tile Lining (a) in lime

Dismantling cement conglomerate floors 25mm to 50mm thick including concrete base.

Scraping (i) White was and colour wash

Removing Doors and windows together with the dismantling of walls (i) Doors

(ii) Windows

Cement concrete 1:3:6 with stone ballast or shingle mixed by mechanical means using concrete mixer volumetric type

Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones (a)Size 600x 600mm

Providing and laying Tactile Flooring Full body vitrified ,low water absorption below 5% having excellent slip resistance ,very dense,durable and abrasion resistant, solid through colour ,fade proof ,highly chemical and stain resistance unglazed finish porcelain tile of size 300mm x300mmx10mm + 5mm thick,approved profile design,Tec-button/Tec-Liner in ordinary grey cement and on 20mm thick bed of cement mortar 1:3 filling neat cement slurry between joints with white cement containin g pigment to match the shade complete in all respect .(tile design and pattern will be as per guidelines issued for persons with disability)

Grouting the joints of flooring tiles having joints of 3 mm width, using 2mm to 3 mm gap using spacers and later this gap to be filled with cement based grout ) with Cement base grout and matching pigments etc., complete, including filling / grouting and finishing complete as per direction of Engineer-in-charge. 600x600mm

Providing and fixing Ceiling at height upto 4 mtr consisting of 12.5mm thick gypsum board of any size G.I. Cradling hanged from the ceiling by means of G.I. hanger complete as per drawings,specifications and to the entire satisfaction of Engineer-in-charge

Providing & Fixing decorative high preassure laminated sheet 1 mm (2 star) thick with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS:2046 type S , including cost of adhesive of approved quality

Kapoor Sal wood chowkats includingiron hold fasts iron hinges corner straps clears, stops wooden knobs fixed in position. (A) Double Rebate (60mm x 150mm)

Teak wood doors shutter and windows panelled glazed or panelled including Iron hinger, screws etc. complete fixed in position (excluding cost of tower bolts and handles but including labour for fittings the same) (Single Leaf) (b) 30mm Thick

Cost of aluminum fittings complete for doors, windows such as tower bolts, handles, Stoppers and screw etc. for these fittings (Excluding sliding bolt) (ii)For shutter area above 0.50 sqm

Providing and fixing aluminum Wire Mesh including cost of necessary fittings i.e. screws,u Type Beading etc. complete

Providing and fixing commercial plywood 25 mm thick

Providing and fixing glass panels with nails and putty or wooden strip complete in all respect . Glazing area above 0.09 sqm. 4mm thick or 10.78 kg/sqm

Preparation of plywood surface for painting including sand papering the surface and applying filling with approved quality fillers consisting of white lead, linseed oil,Varnish, and Chalk Mitti including finishing the surface to required finish complete.

Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.

Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work,metallic or plastered ,concrete surface to give an even shade.

Applying primer coat with metal primer on new steel or iron work including preparatioin of surface

Recessed HGW conduit Pipe Wiring System with modular switches. Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100 volts grade to be laid in heavy gauge welded conduit pipe 20mm/ 25mmdia (1.6mmthick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mmthickwithBrass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100 watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell),PVC Bush, Steel Hooks, Sheet metal fan box (1.6mmthick shape hexagonal), CI Circular junction Boxes(Four way 1½" deep for walls and 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100 volts grade (For 6 Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface): (i) Wiring fan point (With fan box)

(ii) Wiring Light Point

Supply and erection of switches , sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/modular cover frame including fixing & connections and petty material etc.,(i) One Way 6amp. Switch Flush Piano type

(vii)Step type Fan Regulator Flush Piano type (Switch size)

(xxxii) Supply and erection of Modular Cover Frame (Complete set) on the existing metal box including fixing and connection of existing switches and sockets and other petty material etc: (a) Modular Cover Frame One or Two Module

(xxxiii) BAKELITE SHEET: (b) Supply and erection of brown bakelite sheet white glazed translucent backside painted 3mm thick (thickness not less than3mm) on the existing metal box/metal inspection boxes including fixing and other petty material etc

(xxxiv) Supply and erection of Concealed Metal Boxes of various sizes (1/2M, 3M, 4M, 6M, 8M, 12M, 16,18M) with brass lugs recessed in wall for mounting modular accessories including fixing and other petty material etc., including the cost of cutting and filling up of chases (with finishing the surface) (d)Powder Coated Concealed Metal Boxwith Brass Lugs Six Module

(a) ERECTION OF FANS: (i)Erection of Ceiling/ Cabin/ Exhaust fan having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75sq.mm complete(a) Erection of ceiling fan

((ii) Erection of light fixtures on wall /ceiling having connection with PVC insulated PVC sheathed two single core copper conductor (FR) cable 0.75sq.mm complete a) Erection of 1X20/28/36/40W Box Type (LED/ Fluorescent) light fixture

HEAVY GAUGE WELDED CONDUIT PIPES: Supply & erection of Heavy guage welded conduit pipe (ISI marked) as per IS:9537:Part-II for wiring purposes including bends, junction boxes, Steel hooks, GI saddle clamps and other petty materials etc., where necessary including painting as per PWD General Specifications. Supply & erection of 19/20mm dia. M.S. conduit pipe (1.6mm thick),White painted suspension rod for ceiling fan.

Providing and fixing of LED Batten

Supply and fixing of Ceiling Fan

Providing of 3 Seater Bench

Dismantling Brickwork Tile ,masonary or tile lining (b) In Cement

Earthwork in excavation of foundation of structures as per drawing and technical specification ,including setting out,construction of shoring and bracing, removal of stumps and other deterious matter ,dressing of sides and bottom and backfilling with excavated surplus soil. In Ordinary soil (A) By manual means (a) Depth upto 3 m

Cement Concrete 1:2:4 With Stone ballast or shinglemixing by manual means

painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work,mettalic or plasterd ,concrete surface to give an even shade

Applying priming coat with metal primer on new steel or iron work including preparation of surface

Wrought iron & mild steel ladders , framed grills gratings etc. with ends of bars riveted or molded or forded framed window guards, barred iron door stair casse railing etc. including costs of bolts and nuts,screws,welding rod complete fixing in position

Providing and fixing ( PPGL) precoated painted galvalume sheet roofing (size, shape and pitch of corrugation as approved by Engineer-in-charge) The end rib shall have anti cappillary groove and return leg. The steel sheet must be having yield strength of 550 MPa ( Fy= 550 MPa) metallic coated with Zinc- Aluminium alloy ( i.e. 55% Al, 43.4%Zinc, 1.6% Si-Zincalume) AZ150 ( Min. 150 bm/mm2 total on both sides), pre painted with super Durable Polyster XRW quality paint includes inorganic infrared reflective pigment. The sheet confirms to general requirement of AS/NZS 2728 type 4/ IS 15965 class 3 durability and gloss value of 25%-40%. should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.50 mm (+ 0.05 %) thick

Providing 3 Seater Waiting Bench

Any other item

Walia Enterprises