Special Repair of Nonihat-Bashukinath-Kairabani Road under Non Plan Head (Shrawani Mela 2026) for the year 2026-27

Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area SOR - 2.02

Bituminous concrete Grading- II with VG-30 Grade Packed Bitumen Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @5.4 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment , rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause no. 507 complete in all respects. SOR - 5.05 (B)

Tack Coat on Bituminous surfaces Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. SOR - 5.02 i

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface (Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.) SOR - 8.13

Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of class-C Type XI retro reflective sheeting fixed over 2mm thick aluminium sheeting vide clause 801.3, 3/4mm thick Aluminium composite material sheet depending on the size of the sign fixed over back support frame of min 25 x 25 x 3 mm Angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per section 12 of IRC 67. 60 cm x 50 cm rectangular ( Chevron) SOR - 8.04 B xi

Providing Road delineator —do—do— all complete job as per specification of E/I. SOR - 8.15

Providing and fixing Glow studs of size 100X20 mm made of heavy duty body shall be modified ASA ( Acrylic Styrene Acryloretrite) or HIP ( High impact polystyrene) or ABS having electronically welded micro-prismatic lens with abrassion resistant coating as approved by Engineer in charge. The Glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The Slope of retro- reflective surface shall be 35 (+/-5) degree to base. The reflective panels on both sides with atleast 12cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I:809 as recommended in BS:873 part 4: 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge. SOR - DSR 16.50

Painting on concrete surface Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 sqm. RCD SOR - 14.16 SOR - 14.16

Painting on Wood Surfaces (Providing and applying two coats of ready mix paint of approved brand on wood surface after thorough cleaning of surface to give an even shade) RCD SOR 8.10 SOR - 8.1

Painting on Steel Surfaces (Providing and applying two coats of ready mix paint of approved brand on steel surface after through cleaning of surface to give an even shade) RCD SOR 8.09 SOR - 8.09