SPECIAL REPAIRS TO SECURITY FENCE AT CERTAIN LOCATION IN SOUTH AREA OF NASIRABAD MIL STATION

Amount

Dismantling of fencing wiremesh, any type, any size complete all as specified & directed.

Dismantling posts or struts (wood, steel or RCC) embedded in natural ground etc any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Excavation in hard / dense soil for post holes (or similar holes) each not exceeding 0.50 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance not exceeding 50 m and making good surface complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for MS work for fencing post /gates and struts made from angle iron and flat iron in any section including securing bolts, cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire meshetc.) including all necessary drilling, bolting or riveting, etc.,and similar work confo Gde E-165 & Fe -290 or Fe -330 complete all as specified and ditrected

S & F in repair Galvanized, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of posts, straining bolts,standard bolt, including securing or tying at crossing with and including provision of galvanized mild steel wire staples or steel pins, etc complete all as specified and directed (Note: Each line of wire to be measured for the purpose of payment).

Supply only chain link MS galvanised fencing, any size or type complete all as specified and ditrected.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire complete all as specified.

S&F Mild Steel Fe-410-W Gde E-250 or Fe-290 Gde E-165 round bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but not exc10 cm long and 5 to 10 mm dia of shank complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Demolition of cement concrete (unreinforeced) in floors and paving n.exc 15cm thickness (above or below ground level) complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in lintels upto 1.5 m clear span, cills, copings, bed plate, plinth courses, roof kerbs or mud stops rounded or chamfered on edges including necessary form work complete all as specified and directed.

M&L for preparation of newly wall/concrete wall surfaces and applying two coats of cement base paint over incl a coat of primer, complete all as specified and directed.

M&L in repair for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 110 mm bore of pipe etc complete all as specified and directed.

kirtiman traders

SHREE BALAJI TRADING CORPORATION

R.S BUILDERS

M/S JAGDISH PRASAD AIRUN

TANISHQ ENTERPRISES

GOMA CONTRUCTION COMPANY

M/s Jai Jinendra Constructions

V K LAKWAL CONSTRUCTION