WELCOME MAINT, ALLIED B/R AND E/M WORKS FOR OFFRS MD ACCN UNDER GE DIPATOLI

Amount

Taking down cement plaster on brick or concrete surfaces etc including raking out joints, hacking for key scrubbing down with water etc complete all as directed.

M&L for rendering 15 mm thick in cement Mortar (1:4) on the surfaces fair faces of brick work/concrete and finished the surface even and smooth complete as specified and directed

M&L for rendering 15 mm thick in cement Mortar (1:6) on the surfaces other than fair faces of brick work/concrete/ and finished the surface surface even and smoothcomplete as specified and directed

M&L for rendering 10 mm thick in cement Mortar (1:3) on the surfaces of ceiliing and finished the surface even andsmooth complete as specified and directed

M&L for 10 mm thick cement plaster in cement mortar 1:3 including concrete work for RCC chajja, fins, facia ceiling of chajja and like not exceeding 60 cm wide including necessary formwork, scoffolding, finished even & smooth without using extra cement complete all as specified and directed.

Complete removal of existing treatment by scraping with metal plate, wire brush etc all as directed

M&L for preparation of newly / old plastered surfaces of wall and applying a coat of wall care putty 1 mm thick to make the surfaces truly smooth on entire satisfaction of Engineer-in-Charge complete all as specified and directed.

M&L for applying two coats of distemper oil emulsion over a coat of primer white or tinted on new wall surfaces (or necessary preparation if required ) complete all as specified and directed.

M&L for preparing the old surfaces and applying one coat of oil bound distemper white or tinted on walls complete all as specified and as directed by Engr-in-Charge at site.

M&L for preparing the old surfaces and applying one coat of oil bound distemper white or tinted on ceiling complete all as specified and as directed by Engr-in-Charge at site.

M&L for preparing the old surfaces and applying one coat of oil bound distemper white or tinted on walls/ceiling by mechanical applicator complete all as specified and as directed by Engr-in-Charge at site.

Complete removal of existig treatment of any height of bldgs and applying two coat of distemper oil emulsion white or tinted etc on wall by mechenical applicator or as directed by Engr-in-Charge at site.

Complete removal of existing treatment of walls/ ceiling and applying two coats of distemper oil emulsion complete all as directed by Engr-in charge.

M&L for preparation of old surface by brooming down or steel wire brushing, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and greasy spots and also to remove all loose scale of lime/colour wash, including removing nails making good holes, cracks patches only and applying one coat of white wash (lime) on walls including cornices plastered or un-plastered old decorated surface complete all as specified and directed by Engineer-in-charge.

All as per item No-14 here-in-before but applying one coat of white wash on ceiling.

All as per item No-14 here-in-before but applying two coat of white wash on wall including cornices etc complete all as specified and directed by Engr-in-Charge.

All as per item No-14 here-in-before but applying two coat of white wash on ceiling including cornices etc complete all as specified and directed by Engr-in-Charge.

M&L for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of primar complete all as specified and directed.

M&L for preparation of old decorated surface of walls rubbing,watering etc and applying one coat of cement base paint complete all as specified and directed.

M&L for preparation of old plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.

Complete removal of existing treatment and applying two coats of distemper oil emulsion white or tinted over priming plastered or other surface with alkalli-resistant priming paint over 1mm thick wall care putty on ceiling complete all as specified and directed

Complete removal of existing treatment and applying two coats of exterior Emulsion weather proof coat white or tinted on walls/soffit of chajja surfaces complete all as specified directed.

M&L for preparetion of new steel surfaces and applying two coats of synthetic enamel paints over a coat of primar with red oxide on new steel surfaces over 10cm width or girth

M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

M & L for preparation of New or previously untreated wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc buit in cement mortar or cement lime mortar complete all as directed.

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6.00 m mean radius built in cement mortar 1:6 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises beyond 500m from MOD Land or low laying area as directed by Engineer-in-Charge complete all as directed.

Roughening old surfaces by picking, sweeping clean and washing down with water remove dust complete all as specified and directed.

M&L for coloured glazed ceramic tiles in vertical surface 300x 450x 7 mm (any suitable size available in market) over 10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces all as specified and directed

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm as in floor etc, with and including over 15 mm thick screed bed in CM(1:6), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and as directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm as in skirting/dado etc, with and including over 10 mm thick plaster in CM(1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces complete all as specified and as directed.

M&L for vitrified ceramic tiles light shade 10 mm thick (square / rectangular ) polish, area of each tiles not exceeding 0.36 Sqm in size as in floor etc set and jointed, joint free and pointed in white or coloured cement to match incl 20 mm thick screed bed in CM 1:6 on concrete surface rough finish to recive tiles all as specified and directed.

M&L for vitrified ceramic tiles light shade 10 mm thick (square / rectangular ) polish, area of each tiles not exceeding 0.36 Sqm in size as in dado / skirting etc set and jointed, joint free and pointed in white or coloured cement to match incl 10mm thick rendering in cement mortar 1:4 finished rough to recive tiles all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc Laid, bedded.

M&L for Machine cut black Granite stone slab 20 mm thick (as in cooking platform) over 15mm thick (1:6) cement screed base laid and jointed with grey ement slurry mixed with pigment to match the shade of slab including rounding of edges,grinding and polishing complete all as specified and as directed

Rounding to edges of stone slabs on edge such as in steps cooking platform and other similar situations complete all as specified and as directed by Engr-in-Charge.

Demolition of cement concrete (un reinforced) of any description incl. floor tile and in any position not otherwise specifically provided for all as directed

M&L for water proofing treatment to sunken surface of floor slab/skirting/ dome in following sequence:-

(a) Laying plain cement concrete padding 1:2:4 Type B0 (using 12.50mm graded stone aggregate) with integral water proofing compound " Pidicrete URP manufactured by M/s Dr. Fixit or equivalent as per manufacturer instructions" ( note- integral water proofing compound shall be measured in supply only ) complete all as specified and as directed..

(b) floor / vertacal skirting side plaster in CM 1:3, 15mm thick with and including using " Pidicrete URP" manufactured by Dr Fixit as per manufacturer instruction and 72 Hrs tesing for water tightness by ponding of water.

(c) Applications of two coats of proof coat black manufactured by Dr Fixit or equivalent as per manufacturers instructions all over and testing again for water tightness by ponding of water for 72 Hrs.

M&L for cement concrete 1:5:10 Type E2 (40mm graded stone aggregate) as in mass concrete complete all as specified and directed .

Easing of existing door shutters for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed by Engr-in-charge.

Taking down chowkhat or frame with shutters ( without taking off shutters from the frames) n exc 1.50 Sqm each complete all directed.

Taking down chowkhat or frame with shutters ( without taking off shutters from the frames) Exc 1.50 Sqm but n exc 4 Sqm Sqm each complete all as specified and directed.

Taking down shutters area n exc 1.0 Sqm each complete and removing from site complete all as directed.

Taking down shutters area exc 1.0 Sqm but n.exc 2.0 sqm each and removing from site complete all as directed.

Taking down of shutters area exc 1.0 Sqm but n.exc 2.0 sqm each and refixing in same opening shutters including cutting to size and fitting complete all as directed.

S & F pressed steel frame of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc., complete all as specified and directed.

S & F pressed steel frame of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc., complete all as specified and directed.

M&L for cement concrete 1:3:6, type C-0, using 12.50 mm graded crushed stone aggregate as in coping, bed block , water trought and similar works including rounding, chamfered and throting complete all as specified and directed.

M&L for 2nd class hardwood plain, solid, straight chowkhats and frame, wrought, framed rebated on solid, rounded or chamfered, put together with glue pinned at joints supply & fixed complete all as specified and directed.

S&F factory made flush shutter 35mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides and fitted to chowkats complete all as specified and directed. complete all as specified and directed.

S&F factory made 35 mm thick glazed and Skelton door shutter 2nd class HW (rail and style ) open rebated and prepared to receive glass / Gauged divided in to squares with plain chamfered or rounded mitred and rebated fitted with cut and mitered beads for securing glass/ gauged etc size of members of shutters as specified in SSR Part – I section-8, clause 8.24(a) and fixed to Chowkhats, complete all as specified and directed.

S&F factory made 30 mm thick glazed and Skelton windows and ventilator shutter 2nd class HW open rebated and prepared to receive glass / Gauged divided in to squares with plain chamfered or rounded mitred and rebated with sash bars (any numbers) fitted with cut and mitered beads for securing glass/ gauged etc size of members of shutters as specified in SSR Part – I section-8, clause 8.24(b) and fixed to Chowkhats, complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube S&F in opening all as shown on drawing and specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheets strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side and as gap inside for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rail with suitable PVC sheet bending and jointed to gather with solvent cement supplying and fixing in the frame at site as per specification and drawing complete all as specified and directed.

S&F powder coated aluminium ventilator louvre type with frame, aluminium section weighing 0.55 Kg/M including 4mm thick glass/ss wire mesh necessary joining cleats, glazing clips, rubber packing, side handles fixed to wall with fastener etc., complete all as specified and as directed

S&F powder coated Aluminium three track sliding glazed window manufactured with approved aluminium section with three sliding shutters each shutter width one half of the length of window with the following specifiecation and making good the adjascent surfaces :- (a) Window frame of cross section 101mmx40mmx1.5mm thick. (b) Three way track for smooth slding shutters of cross sections 91.80mmx31.75mmx1.1mm thick. (c) Sliding shutter frame of cross section 40x18x1mm. (d) Aluminium glazing stip of size 18.2x16.66mm. (e) 4mm thick flat glass superior quality for two shutter. (f) IDPE rubber gasket for fixing glass. (g) Locking cleat/device as shutter 01 Nos. (h) 02 Nos sliding roller per shutters. (j) aluminium wire cloth 0.36mm stainless steel nominal dia of wire and average width of aperature 1.40mm for one shutter. (k) Fixing screws for frame with wall 06 per window with fancy design. (Note: Window will be measured outer to outer frame and no extra to be paid.

S&F in Repair prelaminated particle board 18-19 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination in cupboard complete all as specified and directed.

M&L for 30mm width of flap MS piano hinges complete as directed at site

S&F Aluminimum anolised barrel tower bolt of extroded section 150mm long , complete all as specified and directed

S&F Aluminum handle cast type anodized size 150 mm long, complete all as specified and directed.

S&F for 300 mm mild steel helical spring including roller and roller plate, complete all as specified and directed

S&F for MS Butt hinges medium weight, cold rolled Mild Steel for 100 mm size all as specified

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed (Length of bolt in 300mm)

S&F in repairs Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed (Length of bolt in 300mm)

S&F in repairs Aluminimum anolised barrel tower bolt of extroded section 150mm long , complete all as specified and directed

S&F in repair Aluminum handle cast type anodized size 150 mm long, complete all as specified and directed.

S&F Framed work such as grills, grating doors or gates etc. of angle iron, flat iron with ends of bars shouldered and or rivetted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings for terrace, framework of water tanks and similar work confirming to Fe 290 complete all as specified and directed

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

S & F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or desereption) from wooden/Steel frames complete all as directed

M&L 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each pan including glazing pins where required complete all as specified and directed

S&F 3.00mm thick pin head, figured glass and glasing with oil putty in Squres/Ractangle n.exc 0.5 Sqm in each paneincluding glazing pins where required complete all as specified and directed

M&L for Plain cement concrete 1:2:4 , type B1, using 20 mm graded crushed stone aggregate) as in coping, bed block , water trought, hold fast and similar works including rounding, chamfered and throting complete all as specified and directed

S&F in repairs decorative curtain rod made out of 25mm dia (outer dia) MS pipe having wall thickness 0.63mm, PVC coated of any colour and pattern as approved overall dia 28 to 28mm, includiing and including two nos brackets on each ends alongwith globe on each ends for earch window/door fro fixing complete all as specified and directed with fancy design complete all as specified and directed

S&F in repairs curtain rails 20 mm dia, mild steel, chromium plated including with fixing brackets, stops, rollers etc for cub board complete all as specified and directed

S&F utensil rack / Kitchen rack stainless steel size 850 mm x 800 mm x 270mm approved Make complete all as specified and directed with fancy design complete all as specified and directed

Supply and fix in repair, sinks with drainage board made of stainless steel 1 mm thick sheet for, kitchen or laboratory with plugs, washers and waste pipe; cast iron cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed

S&F in repair vitreous china squatting pan, Orrissa Pattern size 580x440mm white, with integral foot rest incl connection to trap, and to flush pipe, anti-syphonage etc.complete all as specified and directed by Engr-in-Charge.

S&F in repair Premium one piece ceramic western floor mounted one piece water closet western commode with soft closed seat cover for Lavatory in built flushing cistern, toilet including connection to drain ( or outgoing pipe) and to flushing pipe, antisyphonage pipe etc incl P or S trap complete all as specified and directed by Engr-in-Charge.

S&F in repair vitreous china wash down water closet pan (Pedestal pattern), white (excluding fixing bolt, flushing cistern and flush pipe) but including seat cover of white colour complete all as specified and directed by Engr-in-Charge.

S&F in repair plastic water closet seat cover, Cream / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC complete all as specified and directed.

S&F in repair Bath cabinet mirror of size 350 x 450 mm made of PTMT alloy complete all as specified. With fancy design complete all as specified and directed..

S&F in repair Health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in positiion complete all as specified and directed..

S&F in repair chromium plated hand shower with fancy design.

S&F in repair chromium plated toilet paper holder size 150 x150mm complete all as specified and directed.

S&F in repair for 10ltrs capacity flushing cistern PVC low level valve less, symphonic action type flushing cistern white with inlet, ball valve, float and handle including brackets and 32 mm flush pipe of polyethylene complete all as specified and directed.

S&F in repairs Vitreous China wash basin white flat back size 550x400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia,PVC flexible wastepipe of adequate length and dia and PVC connection 15mm size 450 mm length with brass CP nuts on both sides, complete all as specified and directed.

S&F in repair for PVC waste pipe of 32/38/40 mm dia and 1000 mm long to WHB, urinal and Kitchen sink complete all as specified and directed with fancy design.

Taking down or up 15mm bore steel tubing and connections, including cleaning for re-fixing complete all as specified and directed.

Taking down or up 20 mm bore steel tubing and connections, including cleaning for re-fixing complete all as specified and directed.

Cutting chases in brickwall pinning in making good to facings where required and pointing in cement mortar 1:3 to ends and cutting chases for concealed water tubing and making good cutting n.exc. 10 cm girth.

Supply and laying 16mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking up or down 15mm dia steel tubing and connections from wall / ceiling or laid floors including cleaning for refixing all as directed.

S&F tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors 15mm bore etc complete all as specified and directed .

Refixing old galvanised steel tubes & connections including new fittings on wall 15 mm bore complete all as specified and directed.

S&F tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors 20mm bore etc complete all as specified and directed.

Refixing old galvanised steel tubes & connections including new fittings on wall 20 mm bore complete all as specified and directed.

S&F in repairs pillar tap 15mm bore , half turn type cost copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without letered "Hot or Cold" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc complete all as specified and directed.

S&F in repair stop valve (concealed type), cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore complete all as specified and directed..

S&F in repair Angle valve / stop valve , cast copper alloy fancy type chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore with fancy design (half turn type) complete all as specified and directed.

S&F in repair Angle valve two way, cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore with fancy design (half turn type) complete all as specified and directed.

S&F in repairs brass CP wall mixer tap, fancy type, half turn 15mm dia bore (three in one) for mixing hot and cold water screwed down for iron pipe and fixed in wall and all as specified and directed.

S&F in repairs Brass CP mixer basin tap (mixer pillar tap) 15mm dia bore for mixing hot & cold water with lettered HOT and COLD screwed down for iron pipe with fancy design complete all as specified and directed..

S&F in repairs Bib taps fancy type cast copper alloy chormium plated 15mm bore with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule (half turn type) complete all as specified and directed.

S & F in repair 450 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed.

S&F in replacement chromium plated shower rose fancy type 125mm in size incl fixing to steel pipe or union etc complete all as specified and directed.

S & F in replacement 20 mm dia brass chromium plated tubular towel rail 'D' type 60 cm long between flanges, including one pair of fixing brackets complete all as specified and directed.

Dismantalling of existing water tanks and removinging to store and S&F 1000 ltr capacity Rotational moulded polyethylene water storage tank (three layer) (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.

Dismantalling of existing water tanks and removinging to store and S&F 500 ltr capacity Rotational moulded polyethylene water storage tank (three layer) (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F as in repair PVC water tank cover for 500/1000 Ltrs capacity suitable for PVC tank

Cleaning & removing all scale & dirt etc from existing tanks of capacity 1000 ltrs and mouths of circulating pipes of any description & washing down in the manner complete all as specified and directed for the following capacity :-

S & F in repair 20 mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms.) complete all as specified and directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F Corner Glass Shelf 300 mm (with fancy ABS brackets) of size (300x300)mm complete all as specified and as directed with fancy design complete all as specified and directed..

S&F in repair CP soap Dish approx size 160x 160x90mm complete all as specified and directed

M&L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :- (a) Brushing neat cement slurry @ 3Kg per Sqm on roof slab. (b) 15 mm thick cement plaster fair finished using cement mortar (1:4) with WPC on roof slab. (c) Applying oil based bitumen primer @ 0.30 ltr/Sqm on plastered surface. (d) Applying modified APP polymeric membrane 3mm thick and minimum weight 3.00 Kg / Sqm for water proofing of roof , sealing as directed at site with 100 mm over laps as per manufacture's instruction. (e) Applying two coat of aluminium paint @200 gm/Sqm over bituminous surface of membrane. Note : Supply only WPC shall be measured and paid separately under relevant item.

Supply only integral water proofing compound ISI marked.

Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittins,heads,shoes,bends,swan-necks,etc including removing from site

M&L for 110mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed.

M&L for 75mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed.

S&F PVC (SWR) bends 110 mm bore of any radius all as specified & directed

S&F PVC (SWR) bends 75 mm bore of any radius all as specified & directed..

S&F PVC (SWR) junction single (singleT) equal or unequal 110mm bore provided with access door all as specified & directed..

S&F PVC (SWR) junction single (singleT) equal or unequal 75mm bore provided with access door all as specified & directed..

S&F 110 mm bore PVC (SWR) vent cowl.

S&F 75 mm dia outlet PVC (SWR) floor trap plain with steel grating including jointing with solvent cement.

S&F 110mm dia PVC (SWR) WC connector with lip ring

M & L for providing 100 mm thick cement concrete 1:4:8 type D-2 (using 40 mm grade stone aggregate) as in sub floor, sub base of floor complete all as specified and directed.

M&L for coloured glazed chequered cement concrete tiles with grey cement and no pigment 30cmx30cmx25mm thick over 15mm thick screed bed in CM 1:6 set jointed and pointed in neat cement slurry in floors complete all as specified and as directed by Engr-in-Charge.

E/M WORKS Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safecustody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. etc complete all as specified and directed.

Taking down carefully copper/aluminium sub main wiring of size 2.5/4/6 sqmm from surface/concealed at any height and removing the materials from site and making good the disturbed surfaces of walls,floors roofs etc complete all as specified and directed.

Taking down old/unserviceable TPN/SPN DBs MCB DBs of any capacity by disconnection of electric connection including MCCB, MCBs ,Isolators,etc and making good to disturbed surface complete all as specified and directed.

M&L point wiring for One light/Fan point controlled by one five amps one way single pole switch complete with 1.5 sqmm , single core , multi stranded copper conductor PVC insulated and unsheathed FRLSH cable 1100 Volts grade , drawn through PVC concealed conduit 20/25 mm dia on wall/ceiling ,including replacement by new 3 mm thick phenolic laminated sheet top covers and sunk type CI/steel terminal boxes ,cromium plate screw as suitable size for mounting of switch & scoket including 1.5 sqmm size pvc insulated unsheathed copper conductor to common earth and connecting to earth dolly complete all as specified and directed. Note: The rate quoted is deemed to be included for Penolic sheet (Hylem) and steel terminal box , cutting of hylem sheet for fixing of switch and scoket including cutting chases in wall making good to disturbed surface and matching with existing surfaces.

All as per Ser item No 135 here-in-before but one 3 Pin Socket out let 5 Amps on the same board.

All as per Ser item No 135 here-in-before but one 3 Pin Socket out let 5 Amps on the independent board.

All as per Ser item No 135 here-in-before but one bell/buzzer point controlled by one push button on the independent board.

All as per Ser item No.135 here - in - before but one light point controlled by two 2 - way switches,with wire 1.5 Sqmm size

All as per Ser item No 135 here-in-before but point wiring with 2.5 sqmm for 15 Amp socket out let & provision of earth wire 2.5 sqmm connected to common eart dolly.

M&L for point wiring for One light/Fan point controlled by one five amps one way single pole switch complete with 1.5 sqmm , single core , multi stranded copper conductor PVC insulated and unsheathed FRLSH cable 1100 Volts grade , drawn through PVC Casing caping 20/25 mm on wall/ceiling ,including replacement by new 3 mm thick phenolic laminated sheet top covers and sunk type CI/steel terminal boxes ,cromium plate screw as suitable size for mounting of switch & scoket including 1.5 sqmm size pvc insulated unsheathed copper conductor to common earth and connecting to earth dolly complete all as specified and directed. Note: The rate quoted is deemed to be included for Phenolic sheet (Hylem) and steel terminal box , cutting of hylem sheet for fixing of switch and scoket including cutting chases in wall making good to disturbed surface and matching with existing surfaces.

All as per Ser item No 141 here-in-before but one 3 Pin Socket out let 5 Amps on the same board.

All as per Ser item No 141 here-in-before but one 3 Pin Socket out let 5 Amps on the independent board.

All as per Ser item No 141 here-in-before but one bell/buzzer point controlled by one push button on the independent board.

All as per Ser item No 141 here-in-before but one light point controlled by two 2 - way switches,with wire 1.5 Sqmm size

All as per Ser item No 141 here-in-beforee but point wiring with 2.5 sqmm for 15 Amp socket out let & provision of earth wire 2.5 sqmm connected to common eart dolly.

S&F Switch Piano type 2 way switch 5 amp 230 v complete all as specified and directed at Site.

Supply and fix Switch Piano type, single pole, one way 5 Amp complete all as specified & directed.

S&F Switch piano type , single pole , one way 15 Amps complete all as specified and directed.

S&F Socket out let 2-in-1 2/3 pin 5 Amps complete all as specified and directed.

S&F Socket outlet 2-in-1, 3 pin ,5 and 15 amps , flush type complete all as specified & directed.

S&F in replacement of electric Bell, ding dong type AC 230 Volt single pole complete all as specified & directed at site.

S&F in replacement of Bell push 5 Amps for electric Bell/Buzzer, AC 230 Volt single pole complete all as specified & directed.

S&F Ceiling rose, 3 terminal PVC/polycarbonate complete all as specified and directed.

S&F electronic regulator step type 230 Volts single phase 120 watt complete all as specified and directed at site.

S&F lamp holder , PVC /Polycarbonate type with back plate suitabl for batten fittings complete all as specified and directed at site.

Supply and Fix modular switch one way 6 Amp 240 volts one module complete all as specified and directed at site.

S&F Modular Sheet Cover of size 8"X10" comple all as specified and directed.

S&F Modular Sheet Cover of size 6"X8" comple all as specified and directed.

Supply and Fix modular switch two way 6 Amp 240 volts one module complete all as specified and directed at site.

Supply and Fix modular bell push switch one way 5 Amp 240 volts one module complete all as specified and directed at site.

Supply and Fix modular switch one way 16 Amp 240 volts one module complete all as specified and directed at site.

Supply and Fix socket modular one way 6 amp 240 volts two module complete all as specified and directed at site.

Supply and Fix socket modular one way 16 amp 240 volts two module complete all as specified and directed at site.

Supply & Fix TV socket modular one module complete all as specified and directed at site.

Supply & Fix regulator modular step type one way 220 volt two module complete all as specified and directed at site.

S&F in replacement of sheet metal enclosure with socket plug top , single pole and neutral enclosure with two pin earth plug and socket complete with one MCB SP of capacity 20 Amps to 32 Amps complete all as specified and directed at site.

M&L for submain complete with 2x4 sqmm, single core, multi stranded copper conductor , PVC insulated and unsheathed FRLSH cable 1100 Volts grade, drawn in with and including PVC concealed conduit 20/25 mm dia medium grade as per site requirement along walls/ceiling etc including 4 sqmm size PVC insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed. Note:- (i) all three wire(Phase red colour,neutral black colour and earth wire green colour) should be run through for each individual circuit from the DBs (ii) painting over surface conduit to be done to match with walls/ceiling existing surfaces. (iii) Two run of wire (phase & neutral) and one run of wire (earth conductor) be measured as one length)

Supply and fix in repare MCB DB SPN 4 way double door with metal door suitable for housing of MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed at site.

Supply and fix in repair MCB DB SPN 12 way double door with metal door suitabl for housing of MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directedcomplete all as specified and directed at site.

Supply and fix in repair MCCB DB TPN 4 way with metal door suitable for Provision of incommer as MCCB and out going MCBs grouting/flush in wall and making good to disturbed surfaces incl fixing material/accessories complete all as specified and directed.

Supply and fix in replacement MCCB 100 Amp 415 volts 16kA 4 pole complete all as specified and directed at site.

Supply and fix in replacement MCCB 63 Amp 415 volts 16kA 4 pole complete all as specified and directed at site.

S&F in replacement of MCB SP (6 to 32) Amps 240 V 'C' curve complete all as specified and directed.

S&F in replacement of isolator DP 40 Amps 'C' Series fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed.

S&F in replacement of isolator DP 63 Amps 'C' Series fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed.

S&F in replacement of LED tube light fitting 20 watt 230 Volt decorative ultra slim linear LED Lighting with polycarbonate housing & integrated electronic driver , including all internally pre-wired and inncluding connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed at site.

S&F in replacement of Lienear & compact 9 wat LED mirror light with decorative grey end caps,polycarbonate body and ribbed opal diffuser including 2/3 core flexible copper wire with flexible pipe ceiling rose to light fittings complete all as specified and directed at site.

S&F in replacement of LED warm tube light fitting 20 watt 230 Volt decorative ultra slim linear LED Lighting with polycarbonate housing & integrated electronic driver , including all internally pre-wired and inncluding connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed at site.

S&F in replacement of Ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, Min air dilivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

M/S SAI UDYOG (BID ID -3336413)

M/S.R.S.Chauhan and Sons (BID ID -3329243)

arics infrastructure (BID ID -3333418)

Raju Electrical and Refrigeration Works (BID ID -3336945)

M/S AMOD KUMAR PANDEY (BID ID -3336132)