PROVISION OF ROAD NEAR UNDER GROUND WATER TANK MAP ACCN AT GG FORT AND ALBERT EKKA ENCLAVE UNDER GE AMRITSAR

Amount

Excavating over areas, not exceeding 1.5 m deep and getting out in soft / loose soil complete all as specified and directed.

Removing excavated material exceeding 50m and not exceeding 250m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Rolling and consolidating formation surfaces in cutting with power roller 8 to 12 tonne including filling in soft spots, depressions etc which occurred during rolling (for portion of cutting/original ground only) to required camber and gradient including watering before and during rolling complete all as specified and directed.

Material and labour for soling (or sub base), spread thickness - 150mm, with broken boulders or quarried stone of size 100 to 50mm, deposited, spread, levelled in one layer, interstices filled, surface formed, rolled and consolidated to required gradient and camber complete all as specified and directed.

Material and labour 150mm thick (compacted thickness) WBM, in two layers (75mm thick in each layer) with coarse aggregates (granite) of grading 2 (63 to 40mm size), spread, rolled and consolidated to gradient and camber required complete all as specified and directed.

Scarifying or picking gravelled macadam or bituminous macadam surfaces, in area not exc 400 Sqm, depth exc 50mm and not exc 100mm including removing of unservicable material to a distance not exc 50m complete all as specified and directed.

Material and labour 75mm thick (compacted thickness) WBM with coarse aggregates (granite of 63 to 40mm size, grading 2), spread, rolled and consolidated to gradient and camber required complete all as specified and directed.

Material and labour for premix bituminous macadam laid / rolled and compacted to required gradient and camber (consolidated thickness not more than 75mm) using paving bitumen of any penetration as binder 4% by weight of total mix complete all as specified and directed.

Material and labour for priming / tack coat with bituminous primer (VG-10) @ 10 Kg per 10 Sqm using paving bitumen (VG-10) complete all as specified and directed.

Material and labour for preparing BM surfaces, applying evenly a priming / tack coat with bituminous primer (VG-10) @ 05 Kg per 10 Sqm and providing bituminous premix asphaltic semi dense concrete 30mm consolidated thickness with 5.5% binder (bitumen VG-30) content by weight of total mix, rolled and compacted to required camber and gradient with 8 to 12 tonne roller complete all as specified and directed.

Material and labour for preparing black top surfaces of road by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning with gunny bags to remove all loose dust and applying evenly a priming / tack coat with bituminous primer (VG-10) @ 05 Kg per 10 Sqm and providing bituminous premix asphaltic semi dense concrete 30mm consolidated thickness with 5.5% binder (bitumen VG-30) content by weight of total mix, rolled and compacted to required camber and gradient with 8 to 12 tonne roller complete all as specified and directed.

Material and labour for continuous brick edging, with width equal to the width of the brick, laid dry on end vertically, using burnt clay bricks of Sub Class 'B' (old size bricks) including necessary excavation, embedding bricks in the ground, tamping ground around bricks, removing any surplus spoil complete all as specified and directed.

Material and labour for repair to pot holes of any depth, not exc 1 Sqm each including sweeping free from dust and mud or water scoring sunken surfaces in roads, paths etc, cutting around edges to at least 30mm in depth and making good by applying tack coat with paving bitumen @ 5Kg per 10 Sqm, putting in premixed bituminous macadam well rammed and sealed with binder @ 9.8Kg per 10 Sqm, blinded with 0.09 Cum of stone chippings 6.3mm size and again well rammed to true surface complete all as specified and directed.

Material and Labour for marking lines dashes, arrows, letters etc on road pavement and the like of any width using thermoplastic compound white / yellow paint, conforming to BIS 3262, and according to the specification laid down IRC & MOST (Ministry of Surface Transport) specification 20011 (4th revision), hot applied, 2 mm thick, provided with thermostat machine complete all as specified.

Supply and fixing, in replacement, solar stud size 125x125x25mm made from aluminium alloy and PC construction, solar powered by monocrystal solar panel alongwith high capacity rechargable battery (LED - 10mm, 3 pieces each side and total 6 pieces for high brightness), red colour, water proof conforming to IS-67-1977, visible from 1000 metres, having load capacity of 40 tonnes, back up for 12 hours, continuous lighting at night complete all as specified and directed. Make:- Dark Eye Cat Part No DA-110 or equivalent of makes specified in 'List of Makes'

Supply and fixing, in replacement, road stud, yellow colour, size 110mmx120mm x 24mm minimum, ABS plastic dynamically designed having high impact strength, high density and fixed with nails and adhesive complete all as specified and directed. Make:- Dark Eye Cat Part No DA-972 or equivalent of makes specified in 'List of Makes'

Supply and fixing, in replacement, road stud, yellow colour, size 90/100x17mm, ABS plastic dynamically designed having high impact strength, high density and fixed with nails and adhesive complete all as specified and directed. Make:- Dark Eye Cat Part No DA-972 or equivalent of makes specified in 'List of Makes'

Supply and fixing, in replacement, delineator of size 700 x 100 x 50mm, ABS round body, high reflective (Amber / Red colour) mounted on and including MS pipe 50mm dia duly powder coated overall length 850mm, fitted with anti rust and theft steel net including welding of mild steel flat iron (25 x 5mm, 150mm long) at bottom of delineator including necessary excavation, earth work and PCC block 1:2:4, type B1, size 30 x 15 x 30cm for embedding complete all as specifed and directed. Make:- Dark Eye Model No DA-952 Gp or equivalent make as specified in 'List of Makes'.

Supply and fixing, in replacement, speed breaker, size 750x500x75mm, each piece with two nos of relector, any colour plastic body, conforming to IS 67-1977 and filling hollow part of speed breaker with plain cement concrete 1:2:4, type B-1, fixed with epoxy coating material and necessary fixture complete all as specified. Make:- DARK EYE Model No DA-1006 or equivalent of makes specified in list of makes

Supply and fixing, in replacement, polycarbonate convex mirror, 1000mm dia along with bracket and MS pipe 50mm dia embedded in cement concrete block of adequate size complete all as specified. Make:- DARK EYE / Frontier or equivalent as approved by GE.

Supply and fixing, in replacement, sign board made of 3mm thick high intensity retro-reflective sheet of approved shade, including writing information / logo etc, fixed both sides of aluminium sheet 2mm thick, framing with stainless steel tube 40mm dia (Gde-304) and mounting on 02 Nos stainless steel square tube of 50mm (Gde-304), 3 m high embedded in and including cement concrete 1:2:4, type B-1, block of adequate size including necessary excavation, earth work etc complete all as specified.

TARSAM LAL SAINI CONTRACTOR