Different type of electrical work against Business Plan Scheme 2024-25 (Package No. 1090 and 1091 /24-25 ) Under jurisdiction of EDD, Nadarganj, Amousi Zone, Lesa, Lucknow

Amount

Safe Loading, Carriage & unloading of following Materials from Centre Store to Pit Site/J.E. Dump Store.

line material

LT XLPE/PVC Cable 1X400 sq.mm.

33 KV Composite Polymer Pin Insulator with pin

33 KV XLPE Cable 3x300 sq.mm.

ID/OD cable Jointing Kits 33 KV 3x300 sq.mm

33 KV 3x300 ST Jointing Kit

33 KV Disc Insulator with fitting

33 KV Line Isolator

33 KV BUS Isolator

33 KV Lightening Arrester 400 Amp.

33 KV CT 400/200/1-1-1 A

33 KV VCB 800 A, 750 A

33 KV Control Pannel single Circuit feeder

Control Cable 4x2.5 sqmm.

Control Cable 2x2.5 sqmm.

RAIL/STP Pole 9 To 13 MTR

Well/Bore type earthing of with 80 Fit Deep boring and providing GI Pipe 1.5" dia ("B" Class) and earthing must be joint by G.I. Strip of 32x5 mm thick long attached with nut & bolts and GI pipe cap. All material and labour shall be supplied the contractor.

Laying of LT XLPE/PVC Cable 3.5X70/3.5X400/1x240/1x400/1x630 sq.mm. as per RESPO Norms. Only cable shall be supplied by department.

Digging of pit suitable for 3x300 sq.mm 33 KV XLPE cable laying. After 33 KV XLPE cable laying refilling by Bricks & sand as Per RESPO Norms. Only 33 KV XLPE cable supplied by Department.

Cable Hosting of 33 KV 3x300 sq. mm XLPE Cable at the following including jumpering etc complete with help of GI Pipe as Per RESPO Norms. GI pipe and other required material shall be supplied by contractor.

Laying of 3X300 sq.mm 33 KV XLPE cable by drill method (double circuit) as per RESPO Norms. Only 11 KV XLPE cable supplied by Department.

High pressure testing of 33 KV 3x300 XLPE cable along with arrangement of High Pressure equipment.

Assembling and installation of line /bus isolator on the isolator structure adjusting of opening mechanism in proper alignment so as to ensure smooth operation of the same in case of line isolator proper operation of earth links shall also be insured. The work includes fabrication for proper flexing if required.

Supply and fixing of HDPE pipe as pper RESPO Norms.

Isolator Structure-Fabrication of Isolator structure minimum 3.5 mtr overall height and 2.5 mtr above ground level as per RESSPO drawing, with help of M.S channel 125x65 mm two pieces of M.S channel joined to each other by M.S flat 50x6 mm, diagonally at the interval of 0.5 mtr and top & bottom of the structure. Grouting of Isolator structure in CC (cement ,coarse sand and stone grit of 20 mm gauge) including supply of necessary T&P and painting of structure complete.(only M.S channel and angle provided by the deptt)

Lightning Arrestor/ CT structure/ PT structure : - Fabrication of lightning arrestor/CT structure/ PT structure as per RESSPO drawing with the help of 2 nos M.S channel 125x65 mm minimum 3.5 mtr long grouting 1 mtr deep from ground level in cc in ratio 1:4:8. complete in all respect and painting of structure complete.

Laying of copper control cable of following sizes its proper dressing ,ferruling and connection with the system.

2x2.5 sq mm

4x2.5 sq mm

Construction and fixing of trench cover0.5 M wide 5 mm thick with cement, coarse sand & stone grit in ratio 1:2:4 for covering of cable trench 800 mm wide with provision of M.S Angle and MS Bar as per RESPO Norms

Construction of Control cable trench of size 150 mm wide 300 mm deep with brick work along with provision trench cover M.S strip at the interval of 0.30 M and M.S angle at both the edge of the trench.

Fabrication & Erection of cable stand made of two nos MS channel 100x50x3 mtr. Long jointed to each other by means of 05 nos MS strip 50x6 mm of size 150 mm Long each by welding at equal distance interval as per norms and grouting in block of 300x300x700 completely providing two nos cable clamp also.(All materials will provide by contractor except MS channel).

Mounting of accessories/equipment on fabricated structure complete work with making proper alignment and tightening the work includes fabrication work if required for proper operation of equipment .

33 KV VCB

CT 200/100/1-A & CT 400/200/1A

33 KV lightning Arrestors

Bus Isolator

Line Isolator

Dragging of following panels (Control and feeder pannel) from unloading place upto control room and placement, erection, grouting, commissioning & complete testing of the same as per RESPO Norms

33kv Feeder control panel Single circuit

Laying of D/C 33 KV, 3x300 sq mm XLPE cable in normal soil by digging of trench of suitable size & it's boxing with brick & sand and properly levelling & ramming after laying of cable etc. (All required materials will be provided by contractor except 33 KV cable)

Making of pit for ST Jointing Kit as pper RESPO Norms.

GST Extra as per Rules

P.S. ENTERPRISES (BID ID -4868060)

M/s CHAUHAN ELECTRICALS (BID ID -4867594)

A. A. ENGINEERING CO. (BID ID -4868066)