Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹14.4 L
EMD Value
₹28,880
Closing Date
13 Dec 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GM ZC
GENERAL MANAGER, ZIRCONIUM COMPLEX, PAZHAYAKAYAL-628152
Construction of outdoor basketball Court at Zirconium Complex Township, Pazhayakayal - 628152
2023_NFC_783257_1
ZC/NFC/CIVIL/803/2023
Open Tender
Civil Works
Item Rate
150 days
ZC PAZHAYAKAYAL
AS PER NIT
7 documents required · 7 mandatory
₹0
₹28,880
15 Dec 2023
1 Dec 2023
15 Dec 2023
1 Dec 2023
13 Dec 2023
2 Dec 2023
Amount
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m ) clearing of all the areas involving excavation of all grass,rank vegetation, shrubs, bushes, cutting of trees upto 300mm grith measured at 1.0 mtr above ground level and disposing surplus earth/spoil within a distance of 50 m etc., complete. as per the specification and as directed by the EIC.
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and and directed by EIC
Cement concrete 1:3:6 using Portland Slag Cement (PSC) conforming to IS 455 (M/s. ACC, Ultra Tech,Chettinadu, Coramandal, KCP), crushed stone sand, graded stone aggregates of 40 mm maximum size at and at all depths below plinth level including consolidation, finishing smooth/broom finish as applicable, curing, etc., complete but excluding formwork as per specifications and directed by EIC
Reinforced Cement Concrete by insitu mixing using Weigh Batching or approved RMC source of Grade M - 30 (Minimum Cementitious Content not less than 330 Kg/Cum) up to specified level using Portland Slag Cement (PSC) conforming to IS 455 Part-1 (M/s. ACC, Ultra Tech,Chettinadu, Birla, Coromandal, , KCP make) with manufactured/robo sand and graded stone aggregates of 20mm maximum size including mixing superplasticizer of brand M/s. Fosroc, Demech, Huntsman, Pidilite, Sunanda Chemicals, Agro Chemicals, MBT in proportion as per Manufacturer's Specifications, Pumping / Lifting of concrete to the required heights, Concrete laid to proper level, profile and slope, placing concrete, consolidation, finishing, curing, etc., but excluding Formwork as specified and directed by EIC
a) Upto Finish Floor Level
b) Above Finish Floor Level for all Heights
Providing and laying R.C.C Flooring of mix M-30 with ready mixed concrete from batching plant.(Minimum Cementitious Content not less than 340 Kg/Cum) up to specified level using Portland Slag Cement (PSC) conforming to IS 455 Part-1 (M/s. ACC, Ultra Tech,Chettinadu, Birla, Coromandal, , KCP make) with manufactured/robo sand and graded stone aggregates of 20mm maximum size including mixing superplasticizer of brand M/s. Fosroc, Demech, Huntsman, Pidilite, Sunanda Chemicals, Agro Chemicals, MBT in proportion as per Manufacturer's Specifications. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately).
Supplying, Fabricating, erecting / fixing in position Reinforcement for reinforced cement concrete items at all depths and heights below and above plinth level with high yield strength deformed bars conforming to IS 1786, Fe 500D with TM Treatment from approved source (Vizag steel, Tata, SAIL, Jindal etc.,) including transporting steel to site, loading , unloading, decoiling, straightening, cutting, bending using rod bending machine , fixing and tying in position with two strands of 18 gauge soft drawn annealed MS binding wire, providing cement mortar cover blocks in CM 1:1, etc., complete as per specifications and as directed by the EIC.
Providing formwork (centering and shuttering) using Plywood sheets/steel plates at and at all depths and heights below and above plinth level, in vertical, horizontal and inclined plates including propping and bracing using Acro pipes or steel tubular staging, stripping for in-situ reinforced and plain cement concrete work as required, chamfers, splays, keys, wedges, nails, bracings, brackets and applying a coat of shuttering oil on all contact surfaces with concrete, hacking the surfaces in contract with masonry after stripping etc., complete as specified and directed.
Providing and applying two coats of approved best quality Anti corrosive bituminus based paint confirming to IS 9862 over one coat of compatible primer of approved brand on exterior surfaces of structure below plinth/FFL incuding perparing the surfaces, filling and cleaning etc. complete as specified and directed by EIC
Painting exterior walls on plaster /concrete surfaces with two coats of antifungus and emulsion paint having 100% acrylic, of Asian, Pidilite, Johnson & Nicklson, Nerolac, berger, of exterior quality haying 100% acrylic, of approved shade including preparing surfaces, applying putty in two coats of thickness not less than 1mm of Birla or its approved equivalent wherever required, applying one coat of approved primer as per manufacturers specification, applying and filling cracks or wherever required for external filler, curing, scaffolding, cleaning, etc., complete as specified and directed by EIC
Providing and fixing in position 6 to 12mm thick bitumen impregnated fiber board conforming to IS: 1838, including cost of primer, sealing compound Grade-A in expansion joints complete as specified and directed by EIC
Supplying fixing of Basketball Backboard with acrylic of Size 1800mmx1050mmx20mm and Basketball net with MS suitable frames to fixing with RCC poles of Size 350X400mm including insert plates, anchor bolts and necessary accessories at required height as per standards, specification and directed by EIC
Painting and Marking of basket ball court as per drawing and stantards with two or more coats of synthetic enamel paint over one coat of approved primer as per manufacturers specification, applying and filling cracks or wherever required, cleaning, etc., complete as specified and directed by EIC
stage.html
html • 0.01 MB
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .