Vidhayak Niwas-1, Darulshafa sthit Awas Sankhya-74B me deemakrodhi upchar karane ka karya, kitchen cabinet va cupboard banane ka karya, S.S. parda rod lagane ka karya evam anya civil sambandhi karya.

Treatment of soil under existing floors using chemical emulsion @ one litre per hole , 300mm apart including drilling 12mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth othe hole with chlorpyriphos/ Lindane E.C. 20% with 1%concentration. D.S.R 2.35.3.1

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead. Of area 3 sq. metres and below(D.S.R No-15.12.1)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).salwood D.S.R No-9.1.2

Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for hold fasts embedding hold fasts in cement concrete blocks of size 15x10x10 cm with cement concrete 1:3:6 ( 1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size). painting two coats of approved wood preservation to sides of chowkhats and making good the damages to wall and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-charge. Door chowkhats DSR No- 14.2.1

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) nondecorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws DSR 9.21.1

Painting with synthetic enamel paint of approved brand and manufacturer to give an even shade :one or more coats on old work (DSR-13.99.1)

Providing and Fixing of cup board with mica laminated 18mm HDMR board out side with one side decorative lamination. depth of cupord is 30 cm back side of cup board made by 12mm thick HDMR board including cost of all accessories such as handle, hinges, lock etc complete work with labour as per direction by E/I.

Providing and fixing of kitchen shelves/cabinet with basket, shutter is made by mica laminated 18mm HDHMR board and back side of box is made by 12mmHDHMR board. Length and width of cabinet is 50cm and height of cabinet is 65cm including cost of all accessories such as handle, hinges, lock, channel, basket, catcher etc complete work with labour as per direction by E/I.

Providing and fixing S.S Curtain rods with S.S. Brackets 20 mm dia (heavy type).

Providing and Fixing of PVC wall Pannel approved make , including supply of all material labour T&P etc. required for proper completion of the work .