Internal painting and replacement/repairing of unserviceable sanitary fittings in 1st and 2nd floor of Admn Building Balangir, for leasing out to Utkal Grameen Bank.

Amount

Sub-Head : Finishing

White washing with lime to give an even shade :

Old work (two or more coats) .

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

One or more coats on old work.

French spirit polishing :

One or more coats on old work.

Distempering with 1st quality acrylic washable distemper (ready made) having VOC content less than 50 gm per ltr. of approved manufacturer and of required shade and colour complete as per manufacturer's specification.

One or more coats on old work.

Sub-Head : Sanitary Installations

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:

White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.

10 litre capacity - White

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Flexible pipe

32 mm dia

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Sub-Head : Water Supply

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall

15 mm nominal outer dia. Pipes.

Providing and fixing uplasticised PVC connection pipe with brass unions :

45 cm length

15 mm nominal bore

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931:

15 mm nominal bore.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 :

15mm nominal bore

MARKET RATE ITEM

Providing and fixing anodised aluminium section in widow, shutter, ventilator etc of make Jindal or equivalent as per direction of engineer-in charge.

Proding and fixing 5.00 mm thick float glass panes (weight not less than 12.50 kg/sqm) in window partition etc as per direction of engineer-in-charge

Providing and fixing locally available best quality nickel plated M.S. sliding door bolts with nuts and screws etc. complete.

Providing and fixing locally available best quality oxidised M.S. handles with necessary screws etc. complete :

Providing and fixing CP brass pillar cock weighing not less than 550gm of make approved the Engineer in charge. For approved make tender documents may be seen.

15 mm nominal bore.

Repairing existing brass stop cock / bib cock/ pillar cock by replacing spindle and cap only and making flow of water smooth as per direction of Engineer-in-charge.

Repairing existing Concealed stop cock by replacing spindle and cap only and making flow of water smooth as per direction of Engineer-in-charge.

Leak repair of the PVC over head tank at the junction of fittings and wall including opening the existing pipe fittings and refixing with new jam nuts and required G.I. fittings and leak proof by M-seal as per requirement and as per direction of the Engineer-in-charge.The rate shall be inclusive of material costs, labour charges, tools and plants, equipments and incidentals all complete and nothing extra shall be paid on any account unless otherwise specifically mentioned in the item.

P/F cover for PVC water storage tank of Sintex or equivalent make with proper locking arrangement as per direction of Engineer-in-Charge.

Providing and fixing 50mm dia rigid pvc pipe of supreme or equivalent make including fittings an clamps complete as per direction of enineer-in charge (For Payment only length of pipe shall be measured)

Cleaning of chocked manhole/inspection chamber including bailing out water, removing night soil, debrishes and other materials and disposal of same beyond municipal area including all labours, tools and plants etc. complete as per direction of Engineer-in-charge.(Cleaning shall be done as per complaint received from the occupants after assessment of the same by SDE in charge of the work)

Cleaning of over head tank/ under ground sump by bailing and pumping out of dirty water, brushing the inside surface for removing moss, algae effectively with help of bleaching powder and then washing the inside surface with the help of clear water and finally disinfecting the over head tank/under ground sump by bleaching powder @ 0.5gm/Ltr and disposing waste materials that have been removed from over head tank/under ground sump out side the municipal limits etc. complete as per direction of Engineer-in-charge.

Over head tank (R.C.C / PVC) capacity of upto 1500 litres.

Cleaning the existing terrazo tile flooring by wet grinding of floor with machine fitted with fine grade grit blocks (No320) to get even and smooth surface. Where use of machine for polishing is not feasible or possible, rubbing and polishing shall be done by hand with carborundum stone of fine grade (No120).The surface so polished shall then be thoroughly washed and cleaned to remove all grinding mud and allowed to dry for 24 hours.Oxalic acid shall be dusted over the dried surface @33 gm per square metre sprinkled with water and rubbed hard with a nemdah (pad of woolen rags).The following day the floor shall be wiped with a moist rag and dried with soft cloth and finished clean.

Engaging labour( sewerman / beldar / coolie) for sweeping/washing the room, corridor etc and cleaning roof terrace ,chajja, open surface drain and premises of building including removal of debrishes, sullage & disposal with in a lead of 50 m all complete as per direction of Engineer-in-charge.

Deduction for taking into possession of dismantled damaged unserviceable material in all complete as per directiion of Engineer-in-charge.

CP Brass/ brass bib cock / stop cock/pillar cock/ angle valve etc.

Rajender Singh

DEEPAK KUMAR DAS

Sudhansu Sekhar Choudhury