Providing Puf Panels Sheet,Play Materials and Paver Block Arrangement to Pullukatuvalasai Anganwadi Building in Gunaramanallur Panchayat in Keelapavoor union

Amount

Providing Puf Panels Sheet,Play Materials and Paver Block Arrangement to Pullukatuvalasai Anganwadi Building in Gunaramanallur Panchayat in Keelapavoor union.

Main Estimate

Cipping of concrete and roughening the surface and cleaned away from the site including cost of all labour charges etc., complete.(Ref.:- PWD SOR 2025-26, Annex III- Rates of works - Unique Code- W-0036 (Page-30))

Dismantling the existing Brick/Stone masonry walls in cement mortar under 3m height and cleaned away from the site including cost of all labour charges etc., complete.(Ref.:- PWD SOR 2024-2025, Annex III- Rates of works - Unique Code- W-0015 (Page-27))

Paving the floor with best quality Stain free Nano Polish Vetrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification.

Supply and Delivery of Mild Steel Rectangular tube section including all cost and conveyance all labour charges etc complete.

Supplying and fixing of 0.47mm thick Galvalume sheet on Side Cladding with necessary framing supports with neat alignment and necessary rubber beading etc all complete as directed by the departmental officers

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Centering charges for all concrete works including all cost and conveyance of all materials and all labour charges etc., complete. Corewall

Supplying and fabrication of steel including cost and conveyance of bending to shape and tying in position and forming grills for all R.C.C works including cost and conveyance of all materials to site

Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete.

Brick work in cement mortar 1:5 mix using country bricks 83/4"x4 1/4"x2 3/4" and conveyance of all materials to site and all labour charges etc complete

Plastering with CM 1:5 mix using to 12mm thick including all cost and conveyance of all materials and all labour charges etc., complete

Supply and fixing of PUF Roof panels made up of Minimum 0.5mm thick PPGI Corrugated Sheet at the top and a plain sheet at the bottom with a layer of rigid CFC Free polyurethane form(PUF) OF DENSITY 40kg+2kg/cum as insulation in between.The polyurethane form shall confirm to latest IS 12436.The minimum thickness of PU Foam layer shall be 29mm for having 30mm thick PUF panel. The PPGI Sheets shall be of minimum 240 MPA Steel Grade & Shall have a Zinc Coating of minmum 120 GSM as per IS 277/1992,5-7 Microns of epoxy primer on both sides of the sheet & polyester top coat of 18-20 microns on one side/outer side.The PPGI Sheets /PUF Panels shall have a Protective guard film of minmum 20-25 microns to avoid scratches to finished panel during transportation.Providing ridges or hips, encasing the ends of Panel with plain GS Sheet fixed with polymer coated J or L hooks bolts and nuts 8mm dia G.I Limpet and bitumen washers etc complete excluding the cost of trusses,purlins and inclusive of cutting to size and shape wherever Required.

Distempering two coats using best quality and approved colour of oil bound distemper over one coat of cement paint primer including all cost and conveyance of materials, labour charges etc., complete.

Exterior Emulsion painting two coats with best approved quality and colour emulsion paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Painting two coats over old iron work such as doors, windows, ventilators, windows bars, balustrades etc., with best approved best quality of synthetic enamal paint of approved colour over the existing priming coat etc., complete.

Painting two coats with approved Black Oxide for New Black Board over the cement platered surface including cost and conveyance of paint and all labour charges etc complete

Provision for electrical items

Light and Fan point (SD 22)

15amps plug point (SD 36)

Tube light fittings (SD 88)

Fan fittings (SD 110)

Providing and Laying Paver Block of 60mm thick approved design made out of 12mm and 6mm HBGS chips in M30 mix properly cured to attain the required strength, Laying and interlocking block and well compacted using 1-3 ton capacity compressor, the cost inclusive of all materials for manufacturing, interlocking block loading transportation to work site unloading and labour charges for fixing over Sand bed of 30mm thick & Joints filling using compressor of 1-3 ton capacity including hire and fuel charges for compressor and all other incidental charges etc complete.

Provision for NEW Shed arrangements

Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth,earth mixed with small sized boulders and hard gravelly soil as per SS 20B

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete for 10 cum.

Centring shuttering the sides with necessary supports as per standard specifications including all labour charges etc complete

Supplying and fabrication of steel including cost and conveyance of bending to shape and tying in position and forming grills for all R.C.C works including cost and conveyance of all materials to site

Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete for 10 cum.

Fabrication of Supply of Steel grill gate using structural steel in all aspects as directed ,supply ,assembly and Installation of goat shelter including cost and conveyance of shed materilas and alla labour charrges for fabrication etc complette

Supplying and fixing colour coated galvanised sheet for roofing including all labour charges for fixing neccesary bolt, nuts, screws, "J" or "U" bolts etc,

GST Amount for providing Service to Government Contract Works for the above RENEWAL Works. { GST Amount is the Total GST Amount for overall quoted amount above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

K.Chandrasekar (BID ID -1467177)