Repair and Renovation of Anganwadi Centre at North Wandoor SW Providing IEI

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. a) Group-C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

b) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. a) 20 mm

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 12 Way , Double Door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Single Pole

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required a) 40 Amps

Supplying and fixing Plastic Board of 3.5"x6" on surface including providing and fixing 5 pin 5/6 (2&3 pin) amps socket outlet and 5/6 A, P.T switch, connection, painting, etc as required.

Supplying and fixing Plastic Board of 3.5"x8" on surface including providing and fixing 6 pin & 6/16 amps socket outlet and 16 A, P.T switch connection, painting, etc as required.

Supplying and fixing of surface mounted LED batten Fitting for 20 Watt T-8 Lamp Similar to Crompton Cat No. DMLN1LT8-16 with 20W Retro fit LED Lamp Crompton Cat No.LT8-20-865-2 or its equivalent.

Supplying and fixing brass batten/ angle holder including connection etc. as required.

Supplying of 12Watt LED Lamp in the existing Batten Holder similar to C&S Cat No. LTHPLEDLAMP12W/ B22 as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying of A.C Ceiling fan (1200 mm) sweep (Color: Opal White, Brown) without regulator i/c wiring down rod of standard length (upto 30 cm) with all accessories etc as required. Similar to make Crompton Empower 50-1 Star & ISI Marked or its equivalent

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Providing earthing with safe earthing electrode of galvanization 80 to 100 microns, length 2 mtr, outer dia 50 mm, inner dia 19 mm and inner space be filled with crystalline conductive mixture including filling -up with electrolite (Back fill compound) as required for safe earth electrode and providing masonary enclosure with cover plate having locking arrangement etc. as required. (Ashlok)

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

Providing and fixing Hot Press moulded Sintex Single Phase SMC Meter Box Hinged (L) of Size 250 x 250x 155 mm for accommodating on LT 1 Phase KWH meter with cut out similar to Cat No. GSMB 2525 etc., as required,.

ELECTRICAL PLAZA

JOY GURU ENTERPRISES

DAYAL HALDER

M/s G K Construction