PROVN OF SEWAGE TREATMENT PLANT AT JAISALMER JOB NO 007/AMWP/12C/2021-22

Amount

Lump sum price worked out by the contractor for "BUILDING WORKS" as listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 27(R)

Lump sum price worked out by the contractor for "SITE CLEARANCE, EXCAVATION & EARTHWORK" as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 29(R)

Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 30(R)

Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATIONS" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 33(R)

Lump sum price worked out by the contractor for "ROAD & HARD STANDING" as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 34(R)

Lump sum price worked out by the contractor for "SEWAGE DISPOSAL" as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 35(R)

Lump sum price worked out by the contractor for "AREA DRAINAGE" as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES B/F from Sl page No. 36(R)

Lump sum price worked out by the contractor for "BOUNDARY WALL" as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 38(R)

Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY / TREATED WATER" as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 39(R)

Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION" as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 44(R)

Lump sum price worked out by the contractor for "STP (ELECTRICAL & MECHANICAL)" as listed in Schedule ‘A’ Part-XI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES B/F from Sl page No. 45(R)

Sch 'A' PART-XII (MISCELLANEOUS ITEMS) Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under respective schedule.

INTERNAL WATER SUPPLY S&F 15 mm bore, fancy type, CP brass bib cock screwed for iron pipe or CPVC pipes or for brass ferrule and fixed complete all as specified and directed. Make:- Jaquar ESSCO SERIES or technocommercial equivalent makes as per Appx 'C' and as approved by GE.

S&F 15 mm bore, fancy type, CP brass angular stop cock screwed for iron pipe or CPVC pipes or for brass ferrule and fixed complete all as specified and directed. Make:- Jaquar ESSCO SERIES or technocommercial equivalent makes as per Appx 'C' and as approved by GE.

S&F 15 mm bore, fancy type, CP brass concealed stop cock, regular body with adjustable wall flange, screwed for iron pipe or CPVC pipes or for brass ferrule and fixed complete all as specified and directed. Make:- Jaquar ESSCO SERIES or technocommercial equivalent makes as per Appx 'C' and as approved by GE.

S&F overhead shower 80 mm dia of ABS body crome plated with grey face plate with arm having swivel joint chromium plated complete all as specified and directed. Make:- Jaquar ESSCO SERIES or technocommercial equivalent makes as per Appx 'C' and as approved by GE.

S&F 15 mm bore, fancy type, CP brass pillar cock, quarter turn, screwed for iron pipe or CPVC pipes or for brass ferrule and fixed complete all as specified and directed. Make:- Jaquar ESSCO SERIES or technocommercial equivalent makes as per Appx 'C' and as approved by GE.

S&F health foucet with 1.0 m long flexible mild steel tube 80 mm dia with wall hook complete all as specified and directed. Make:- Jaquar ESSCO SERIES or technocommercial equivalent makes as per Appx 'C' and as approved by GE.

S&F 15 mm bore CP cast copper alloy body wall mixer for overhead shower connection with 115 mm long bend pipe on upper side, connecting leggs & wall flanges complete all as specified and directed. Make:- Jaquar ESSCO SERIES or technocommercial equivalent makes as per Appx 'C' and as approved by GE.

INTERNAL ELECTRIFICATION S&F LED lamp B22 base 10 W, min lumen output 950 lumen at 6500 K CCT for batten holder complete all as specified and directed.

S&F LED batten with LED tube suitable for indoor application 20 W, 4' length, wall mounted with aluminium housing, end cap made of ABS plastic of white colour finish and high efficiency translucence (HET) diffuser and integral electronic driver including two point surface mounting on wall / ceiling and connecting up with two core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

S&F LED Security light fitting made out of pressure die cast aluminium powder coated housing high impact resistant 4mm thick toughened glass cover and matrix of power LEDs inbuilt electronic driver up to 4 KV surge protection fitted with adjustable pole adapter to enable on site tilt angle setting depending on road geometry CCT 5500-6500 CRI greater than 70, input power 30 W system with 100 lumens per watt output operating voltage 140-280V with connection by three core PVC insulated multistaranded copper conductor sheathed cable of size 1.0 sqmm fixed with & including bracket made of GI Pipe 40 mm bore light grade, 1.6 Mtr long bent to shape required with 2 Nos MS clamps of suitable size and length, nuts & bolts complete all as specified and as directed.

Note for item No 22.00:- (1) The LED lights shall have guarantee for 5 Years from date of completion of contract , any defects noticed during this period shall have be rectified / Parts replaced immediately, security amount of 10% of the cost of the item shall be retained with the Deptt till end of the guarantee period. (ii) LED light manufacturer lab shall be accredited to NABL.Cat No. LST-30-CDL-M of Crompton or techno commercial equivalent makes as per Appx 'C'.

ROAD & HARD STANDING M & L for 125 micron thick polythene sheet laid in ground complete all as specified and directed.

SEWAGE DISPOSAL M&L for Providing and fixing SFRC (Steel Fibre Reinforced Concrete) Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to IS - 12592, total weight of cover and frame shall not be less than 182 Kg fixed in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate complete all as specified and directed.

S&F Polymer encapsulated foot rest in manholes complete all as specified and directed.

M&L for DWCPE pipe 180mm (OD)/163mm (ID) dia complete laid in trenches including earthwork, removal and returning in filling and jointed including testing alongwith necessary jointing material tees/ union/ socket etc complete laid on PCC bed, 1:2:4 type B0 using 12.5mm graded stone aggregate, 150 mm thick in of average depth 2.0 m including packing under and haunching against the side of pipes after they are laid and tested all as specified in IS 16098:2013 complete all as specified and directed. Note:- Excavation and Earth work shall be measured and paid seperately.

EXTERNAL WATER SUPPLY / TREATED WATER Construction of stone masonry valve pit for Sluice valve including plastering, PCC in foundation, Excavation and earth work in any type of soil, MS sheet cover 3 mm thick sheet with locking arrangement painted with two coat of anti corossive paint over one coats of red oxide primer of size 1050x750x1000 mm (Type 'A') all as specified

All as per item No 27.00 hereinbefore but of size 900x600x1000 mm (Type 'B') all as specified

All as per item No 27.00 hereinbefore but of size 450x450x600 mm (Type 'C') all as specified

M&L for Cutting the existing GI/CPVC pipe of 50/25 mm dia and connecting the new pipe line for pressure booster including all joints all as specified.

Supply, install, test and commission centrifugal monoblock feed pump for pumping tertiary treated water to arboriculture complete all as specified. The pump shall be suitable for the given duty points. Out of three pumps, two will be working and one will be stand by. Motor shall be energy efficient conforming to IS 12615.

(i) Water Quantity - 312 Litre per minute (ii) Static Head - 22 M (iii) Speed - 1450 RPM (iv) Impeller - Bronze (v) Shaft - High Tensile steel (vi) Pump/motor body- CI (vii) Seal - Mechanical (viii) Motor - Suitable HP, Sqirrel, Cage SPDP, Class 'B' Insulation (ix) Starter - Star-Delta (x) Base frame - Fabricated MS (xi) Foundation - RCC/PCC Foundation as per OEM Recommendations

S&F Cast Iron Foot Valve conforming to IS 4038, 100 mm dia complete all as specified and directed.

S&F Cast Iron reflux valve with bypass arrangement PPR 63 mm dia complete all as specified and directed.

Supply, install, test and commission centrifugal monoblock feed pump for pumping tertiary treated water to arboriculture complete all as specified. The pump shall be suitable for the given duty points. Out of three pumps, two will be working and one will be stand by. Motor shall be energy efficient conforming to IS 12615.

(i) Water Quantity - 365Litre per minute (ii) Static Head - 29 M (iii) Speed - 1450 RPM (iv) Impeller - Bronze (v) Shaft - High Tensile steel (vi) Pump/motor body - CI (vii) Seal - Mechanical (viii) Motor - Suitable HP, Sqirrel Cage SPDP, Class 'B' Insulation (ix) Starter - Star-Delta (x) Base frame - Fabricated MS (xi) Foundation - RCC/PCC Foundation as per OEM Recommendations

EXTERNAL ELECTRIFICATION M&L for earthing complete with galvanised steel earth electrode 60 cm x 60 cm x 6 mm buried directly in ground vertically to depth not less than 2.25 m below normal ground level with top edge of the earth plate at a depth not less than 1.5 m below ground level connected to and including GI earth lead wire 4 mm dia by means of nuts, bolts, check nuts and washer etc, made of GI and connected to test point and earth dolly all as shown in electrical plate No. 3 SSR Part-I 2009 and specified or indicated including excavation and earthwork in any type of soil PCC (1:3:6) Type C1 in chamber, precast RCC 50 mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4.00 Kg/Square metre) with cast iron frame, funnel with wire mesh, 20 mm bore medium grade GI watering pipe, lugs, 15 mm bore medium grade GI protection pipe, test point etc. complete all as specified and directed. Note:- (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to and including earth lead of galvanized strip 32 x 6 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion and excavation and earth work in any type of strata, PCC 1:3:6 type C1 in chamber, precast RCC cover 50 mm thick in cement concrete 1:2:4 type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4 Kg/Sqm) with cast iron frame, funnel with wire mesh, 20 mm bore GI pipe medium grade watering pipe, lugs, 40 mm bore GI pipe medium grade protection pipe up to 7.5 m. NOTE:- Item includes the cost of earth lead and GI protection pipe up to 7.5 m. GI strip and protection pipe beyond 7.5 m shall be measured and paid for separately.

(a) Overload, (b) Undervoltage (c) Voltage imbalance (d) Over temperature. It should have the provision the system automatically OFF after conditions are restored, should be suitable for 440V, AC, 50HZ outdoor use within coming MCCB of suitable range and asthetically designed 3.15 mm thick CRCA sheet cabinet Out door type, powder coated complete with forced cross flow cooling system work also includes making PCC block type 0.6 Mtr above ground level and grouting etc. complete all as specified & directed.

Supply, fixing, testing and commissioning of lithium based integrated solar street light 16 W the system shall include FRP Housing 16 W Hi brightness LED light (120-140 luminous/W) operating voltage 11.1/12.8 volt. IP 65 complaint. driver efficiency 85% to 90%, CRI > 70 CCT 5000 TO 6500K.toughen glass acrylic cover. MPPT/PWM base charge controller with hi-efficiency LED driver design with/without dimming function as per IEC standards. Hi-efficiency Mono/poly crystalline solar panel. lithium battery, 2 days autonomy,19.8 AH. DOD 90 to 95%,25/30 wp solar panel complaint to MNRE specification complete with GI / MS suitable size of pole duly painted of 5 metre height complete,foundation of pole with PCC 1:3:6 using 20mm graded aggrigate of size 450 x 450 x 1000mm deep. including 1.sqmm 3.0 core flexible Copper cable in PVC conduits from juction box to connector of street light fitting.

(a) Copper bus bar capacity 100 Amps for Phase-R-Y-B-3 Nos & one for neutral -1 No (b) MCB TPN of 50 Amp, 10 KA, C curve - 1 No (on incoming) (c) MCB TPN 32 A, 10KA, ‘C’ Curve – 03 Nos with automatic star delta starter for non clog sewage submersible motor pump set (For peak flow pump) & 01 No (For average flow pump) including over voltage, under voltage tripping protection for submersible pump set. (d) MCB SPN 30 A with Star Delta starter for non clog sewage submersible motor pump set (For peak flow pump) & 01 No (For average flow pump) 1 No. (For average flow Pump) (e) MCB SPN 5A 10 KA, C curve for yard lighting - 1 Nos. (f) Single phase preventer.

All as per item No 39.00 hereinbefore but consisting of following:-

(a) Copper bus bar capacity 100 Amps for Phase-R-Y-B-3 Nos & one for neutral -1 No (b) MCB TPN 32A, 10KA, ‘C’ Curve - 1 Nos (Incoming) (c) MCB TPN 25 A, 10KA, ‘C’ Curve with Star Delta starter for non clog sewage submersible motor pump set (For peak flow pump) & 01 No (For average flow pump) - 2 Nos. (d) MCB TPN 25 Amp, 10KA, ‘C’ Curve With Star Delta.starter for non clog sewage submersible motor pump set (For peak flow pump) & 01 No (For average flow pump) - 1 Nos. (e) MCB SPN 5 A, 10KA, ‘C’ Curve for yard lighting 1 Nos. (f) Single phase preventer.

All as per item No 39.00 hereinbefore but consisting of following:-

(a) Copper bus bar capacity 100 Amps for Phase-R-Y-B-3 Nos & one for neutral -1 No (b) MCCB TPN 63 A, 16KA - 1 Nos. (Incoming) (c) MCB TPN 40 A, 10 KA, 'C' curve with automatic star delta starter for non clog sewage submersible motor pump set (For peak flow pump) & 01 No (For average flow pump) - 2 Nos. (d) MCB TPN 25 A, 10KA, ‘C’ Curve with automatic Star Delta starter including over voltage, under voltage tripping protection for non clog sewage submersible motor pump set (For peak flow pump) & 01 No (For average flow pump) - 1 Nos. (e) MCB SPN 5 A, 10KA, ‘C’ Curve for yard lighting - 1 No. (f) Single phase preventer.

All as per item No 39.00 hereinbefore but consisting of following:-

(a) Copper bus bar capacity 100 Amps for Phase-R-Y-B-3 Nos & one for neutral -1 No (b) MCB TPN of 20 Amp,10 KA ‘C’ Curve - 1 No (Incoming) (c) MCB TPN of 20 Amp, 10KA, ‘C’ Curve – 02 Nos with automatic Star Delta starter including over voltage, under voltage tripping protection (For peak flow pump) (d) MCB TPN of 20 Amp, 10KA, ‘C’ Curve – 02 Nos with automatic Star Delta starter including over voltage, under voltage tripping protection for non clog sewage submersible motor pump set (For peak flow pump) & 01 No (For average flow pump) - 1 Nos. (For average flow Pump) (e) MCB SPN of 5 Amp, ‘B’ Curve for yard lighting - 1 No. (f) Single phase preventer.

All as per item No 39.00 hereinbefore but consisting of following:-

(a) Copper bus bar capacity 100 Amps for Phase-R-Y-B-3 Nos & one for neutral -1 No (b) MCB TPN 30 A 1 No. (Incoming) (c) MCB TPN 10 A with DOL starter for non clog sewage submersible motor pump set (For peak flow pump) & 01 No (For average flow pump) - 2 Nos. (d) MCB TPN 15 A, 10KA, ‘C’ Curve with DOL starter for non clog sewage submersible motor pump set (For peak flow pump) & 01 No (For average flow pump) - 1 No. (e) MCB SPN 6 A for yard lighting 1 Nos. (f) Single phase preventer.

All as per item No 39.00 hereinbefore but consisting of following:-

(a) Copper bus bar capacity 100 Amps for Phase-R-Y-B-3 Nos & one for neutral -1 No (b) MCB TPN 10 A - 1 No. (Incoming) (c) MCB SPN 10 A with DOL starter for non clog sewage submersible motor pump set (For peak flow pump) & 01 No (For average flow pump) - 2 Nos. (d) MCB SPN 5 A with DOL starter for non clog sewage submersible motor pump set (For peak flow pump) & 01 No (For average flow pump) - 1 Nos. (e) MCB SPN 5 A for yard lighting 1 Nos. (f) Single phase preventer.

S&F LED Security light fitting made out of pressure die cast aluminium powder coated housing high impact resistant 4mm thick toughened glass cover and matrix of power LEDs inbuilt electronic driver up to 10 KV surge protection fitted with adjustable pole adapter to enable on site tilt angle setting depending on road geometry CCT3000-6000 CRI greater than 70, input power 35 W system with 100 lumens per watt output operating voltage 160-260V with connection by three core PVC insulated multistranded copper conductor sheathed cable of size 1.5 SQMM fixed with PVC pipe 15 mm dia fixed with clamp & including bracket made of GI Pipe 40mm bore light grade, 1.5 Mtr long bent to shape required with 02 Nos MS clamps of suitable size and length, nuts & bolts complete all as specified and as directed

Note for item No 45.00:- (1) The LED lights shall have guarantee for 5 Years from date of completion of contract , any defects noticed during this period shall have be rectified / Parts replaced immediately, security amount of 10% of the cost of the item shall be retained with the Deptt till end of the guarantee period. (ii) LED light manufacturer lab shall be accredited to NABL.Cat No. LST-35-CDL-M of Crompton or techno commercial equivalent makes as per Appx 'C'.

S&F Junction box of size 280 X 170 X 130 mm Cat No GS-JB-2817 Hinged (L) wiith 2 way connector mounted on epoxy insulators for looping of cable for 1Phase and 1neutral fixed on pole with the help of MS nuts bolts and MS clamps-2 Nos of size 40 mm X 4 mm thick with one No MCB SP 6 Amp capacity mounted on din rail inside box. work also includes making suitable hole in pole to take out connections to fitting if required at site and provisioning of 1.0 sqmm 3.0 core flexible PVC insulated copper cable from junction box to conector of street light.

S&F Junction box of size 280 X 170 X 130 mm Cat No GS-JB-2817 Hinged (L) wiith MCB TPN 32 Amps for looping of cable for 3 Phase and 1 neutral fixed on pole with the help of MS nuts bolts and MS clamps-2 Nos of size 40 mm X 4 mm thick with one No MCB SP 6 Amp capacity mounted on din rail inside box. work also includes making suitable hole in pole to take out connections to fitting if required at site.

DG SET Supply, installing, testing and commissioning complete of Manufacturer or OEM (Original Eqpt Manufacturer) Silent Diesel Engine driven generating set with Auto main failure (AMF) panel with complete accessories as per OEM, capable of delivering 62.5 KVA ( 50 KW),415 volts (AC 3 Phase, 4 wire system of supply), 50 Hz at power factor 0.8 minimum. The DG set shall consist of a diesel engine coupled through flexible coupling to a matching alternator, and mounted on common MS fabricated base frame with AVM Pads and thereafter installed in the CPCB approved acoustic enclosure (the complete set conforming to and test certified as per CPCB norms and as specified) all as specified complete, with control panel standardised by manufacturer, fuel tank with mounting arrangement and inlet, outlet, return oil arrangement, suitable capacity of cooling tower, flexible exhaust pipe complete and shall comprise of the following: -

(a) ENGINE (PRIME MOVER): Diesel engine 1500 RPM, of 84 BHPas recommended by manufacturer to deliver 50 KW output , water cooled, Turbocharged aircooled, 180 AH 12/24 volts electric battery start, complete with fly wheel and all standard fittings/ fixtures as per manufacturing practice including suitable engine control panel with tachometer, lub oil temp & pressure gauges, water temp gauge, and frequency meter (digital type) (including safety shutdown contents) and also including self starter, dynamo, fuel tank etc. (b) ALTERNATOR : AC alternator of 62.5 KVA, self excited, self regulated, self ventilated, brushless design, conforming to BS 5000, IS 4722, 3 phase , 415 volts, 4 wire rated line current 90 amps for output PF 0.8, 1500 RPM, insulation class ‘H’; Enclosure IP 23 / TEFC complete with AVR with + 1 % voltage regulation, directly coupled to and match the above engine. (c) MS fabricated base frame with AVM Pads for mounting engine – alternator assembly on the base frame/ plate. (d) BASE PLATE : Made out of structural steel as per manufacturer’s recommended design/ specifications.

(e) ACOUSTIC ENCLOSURE: Provision of an integral type approved / certified acoustic enclosure, as per CPCB norms, for the DG sets to restrict the noise level to 75 dbA at one metre along and temp rise within canopy shall not exceed 5º – 7º Celsius. It shall be made of 16 SWG CRCA MS sheet with powder-coated finish on outside and C type sheet metal base frame of 3.mm thick CRCA sheet steel with non igniting fire retardant foam as acoustic material. There shall be four hinged doors out of which one shall be with a glass window. It shall also include the following:- (i) Silencer: Absorption type, non-resistance, residential and exhaust pipe covered with asbestos rope lagging extending to about 2 metres outside the accoustic enclosures. (ii) Internal wiring with PVC copper conductor cables, IS 694 marked, FRLS in conduit and fluorescent lamp fittings. (g) Control panel (h) CATALOGUES : Operation and maintenance manual, spare parts list, overhauling manual 03 sets.

Supply, installing, testing & commissioning of Manufacturer or OEM (Original Eqpt Manufacturer) Silent Diesel Engine driven generating set with Auto main failure (AMF) panel with complete accessories as per OEM, capable of delivering 82.5 KVA ( 66 KW), 415 volts (AC 3 Phase, 4 wire system of supply), 50 Hz at power factor 0.8 minimum. The DG set shall consist of a diesel engine coupled through flexible coupling to a matching alternator, and mounted on on common MS fabricated base frame with AVM Pads and thereafter installed in the CPCB approved acoustic enclosure (the complete set conforming to and test certified as per CPCB norms and as specified) all as specified complete, with control panel standardised by manufacturer, fuel tank with mounting arrangement and inlet, outlet, return oil arrangement, suitable capacity of cooling tower, flexible exhaust pipe complete and shall comprise of the following: -

(a) ENGINE (PRIME MOVER): Diesel engine 1500 RPM, of 105 BHP as recommended by manufacturer, water cooled, Turbocharged aircooled, 180 AH 12/24 volts electric battery start, complete with fly wheel and all standard fittings/ fixtures as per manufacturing practice including suitable engine control panel with tachometer, lub oil temp & pressure gauges, water temp gauge, and frequency meter (digital type) (including safety shutdown contents) and also including self starter, dynamo, fuel tank etc. (b) ALTERNATOR : AC alternator, self excited, self regulated, self ventilated, brushless design, conforming to BS 5000, IS 4722, 3 phase , 415 volts, 4 wire rated line current 115 amps for output PF 0.8, 1500 RPM, insulation class ‘H’; Enclosure IP 23 / TEFC complete with AVR with + 1 % voltage regulation, directly coupled to and match the above engine. (c) MS fabricated base frame with AVM Pads for mounting engine – alternator assembly on the base frame/ plate. (d) BASE PLATE : Made out of structural steel as per manufacturer’s recommended design/ specifications.

(e) ACOUSTIC ENCLOSURE: Provision of an integral type approved / certified acoustic enclosure, as per CPCB norms, for the DG sets to restrict the noise level to 75 dbA at one metre at 75% load along and temp rise within canopy shall not exceed 5º – 7º Celsius. It shall be made of 16 SWG CRCA MS sheet with powder-coated finish on outside and C type sheet metal base frame of 3.mm thick CRCA sheet steel with non igniting fire retardant foam as acoustic material. There shall be four hinged doors out of which one shall be with a glass window. It shall also include the following:- (i) Silencer: Absorption type, non-resistance, residential and exhaust pipe covered with asbestos rope lagging extending to about 2 metres outside the accoustic enclosures. (ii) Internal wiring with PVC copper conductor cables, IS 694 marked, FRLS in conduit and fluorescent lamp fittings. (f) Control panel (g) CATALOGUES : Operation and maintenance manual, spare parts list, overhauling manual 03 sets.

STP & SEWAGE WELL Construction, installation, testing & commissioning of Sewage Treatment Plant of 300 KLD capacity all as specified and as shown in drawing comprising of the following:-

(a) Stilling chamber of RCC M-30 grade - 01 No (b) Grit chamber of RCC M-30 grade - 1 Nos (c) Equalizing tank of RCC M-30 grade - 01 Nos (d) Stilling chamber of RCC M-30 grade - 01 Nos (e) Fine screen chamber of RCC M-30 Grade -01 Nos (f) MBBR Reactor tank of RCC M-30 grade - 02 Nos (g) clarifier/ tube settler in RCC M-30 grade. Tube settler will have inclined PVC tube/ Lamela plates arangement for settlement of suspended particle, a butter fly valve at out let of required size and connected with 300 mm CI Pipe. Shape, size, height of PVC tube shall be as per OEM design. A trough shall be provided at top to collect clear water. Size, shape and number of troughs shall be decided by OEM. Cost quoted include the cost of inclined tube arrangement, valve, Connection to CI Pipe , trough, CI Pipe upto sludge holding tank as shown in drawing etc -- 1 Nos.

(h ) Chlorine feeding tank of RCC M-30 grade - 01 No (j) Filter feed tank of RCC M-30 grade - 01 No (k) Treated water tank of RCC M-30 Grade 01 No (l) Sludge holding tank of RCC M-30 grade - 03 Nos (m) Centrifuse Filtrate tank of RCC M-30 Grade 01 No (n) Pressure filter & carbon filter to be add. (o) Interconnecting pipe connection between tank, hopper to sludge holding tanks and sluice valves.

M&L for construction of RCC sewage sump, open well type as shown in drawing with expanded metal cover of 3 mtr dia and 7.4 mtr deep from ground complete all as specified and shown on drawings including one chain pulley block of 0.5 Ton Capacity , Aluminium bucket, 8 mtr long steel chain to lift aluminium bucket etc.

M&L for construction of RCC sewage sump, open well type as shown in drawing with expanded metal coverof 4 mtr dia and 7.30 mtr deep from ground complete all as specified and shown on drawings including one chain pulley block of 0.5 Ton Capacity, Aluminium bucket, 8 mtr long steel chain to lift aluminium bucket etc.

Construction of Flushing tank of 4500 litre capacity all as specified and shown in drawing

Construction, installation, testing & commissioning of Sewage Treatment Plant of 700 KLD capacity all as specified and as shown in drawing comprising of the following:-

(a) Stilling chamber of RCC M-30 grade - 01 No (b) Grit chamber of RCC M-30 grade - 2 Nos (c) Equalizing tank of RCC M-30 grade - 01 Nos (d) Stilling chamber of RCC M-30 grade - 02 Nos (e) Fine screen chamber of RCC M-30 Grade -02 Nos (f) MBBR Reactor tank of RCC M-30 grade - 02 Nos (g) clarifier/ tube settler in RCC M-30 grade. Tube settler will have inclined PVC tube/ Lamela plates arangement for settlement of suspended particle, a butter fly valve at out let of required size and connected with 300 mm CI Pipe. Shape, size, height of PVC tube shall be as per OEM design. A trough shall be provided at top to collect clear water. Size, shape and number of troughs shall be decided by OEM. Cost quoted include the cost of inclined tube arrangement, valve, Connection to CI Pipe , trough, CI Pipe upto sludge holding tank as shown in drawing etc 2 Nos.

(h ) Chlorine feeding tank of RCC M-30 grade - 01 No (j) Filter feed tank of RCC M-30 grade - 01 No (k) Treated water tank of RCC M-30 Grade 01 No (l) Sludge holding tank of RCC M-30 grade - 03 Nos (m) Centrifuse Filtrate tank of RCC M-30 Grade 01 No (n) Pressure filter & carbon filter to be add. (o) Interconnecting pipe connection between tank, hopper to sludge holding tanks and sluice valves.

M&L for construction of RCC sewage sump, open well type as shown in drawing with expanded metal cover of 4 mtr dia and 8.10 mtr deep from ground complete all as specified and shown on drawings including one chain pulley block of 0.5 Ton Capacity, Aluminium bucket, 6.5 mtr long steel chain to lift aluminium bucket etc.

M&L for construction of RCC sewage sump, open well type as shown in drawing with expanded metal coverof 4 mtr dia and 7.7 mtr deep from ground complete all as specified and shown on drawings including one chain pulley block of 0.5 Ton Capacity, Aluminium bucket, 8 mtr long steel chain to lift aluminium bucket etc.

M&L for construction of RCC sewage sump open well type as shown in drawing with expanded metal coverof 4 mtr dia and 8.1 mtr deep from ground complete all as specified and shown on drawings including one chain pulley block of 0.5 Ton Capacity, Aluminium bucket, 8 mtr long steel chain to lift aluminium bucket etc.

M&L for construction of RCC sewage sump, open well type as shown in drawing with expanded metal coverof 4 mtr dia and 7.30 mtr deep from ground complete all as specified and shown on drawings including one chain pulley block of 0.5 Ton Capacity, Aluminium bucket, 8 mtr long steel chain to lift aluminium bucket etc.

STP (ELECTRICAL & MECHANICAL) Supply, install, test and commission centrifugal monoblock feed pump for pumping treated water to oxidation pond all as specified. The pump shall be suitable for the given duty points . Out of three pumps, two shall be working and one will be stand by. Motor shall be energy efficient conforming to IS 12615.

(i) Water Quantity- 227 Litre per minute (ii) Static Head -27 M (iii) Speed - 1450 RPM (iv) Impeller - Bronze (v) Shaft - High Tensile steel (vi) Pump/motor body- CI (vii) Seal - Mechanical (viii) Motor - Suitable HP, Sqirrel Cage SPDP, Class 'B' Insulation (ix) Base frame - Fabricated MS (x) Foundation - RCC/PCC Foundation as per OEM Recommendations Note:-The each pump should be provided with Anti Vibration Pads and RCC/Cement concrete Foundation, 1 Nos 100 mm dia dial type pressure gauges on outlet shall also be provided. The cost quoted by the contractor for this deemed to be included.

Supply, install, test and commission centrifugal monoblock filter feed pump for pumping treated water to pressure filter all as specified. The pump shall be suitable for the given duty points . Out of three pumps, two shall be working and one will be stand by. Motor shall be energy efficient conforming to IS 12615.

(i) Water Quantity- 227 Litre per minute (ii) Static Head -30 M (iii) Speed - 1450 RPM (iv) Impeller - Bronze (v) Shaft - High Tensile steel (vi) Pump/motor body- CI (vii) Seal - Mechanical (viii) Motor - Suitable HP, Sqirrel Cage SPDP, Class 'B' Insulation (ix) Base frame - Fabricated MS (x) Foundation - RCC/PCC Foundation as per OEM Recommendations Note:-The each pump should be provided with Anti Vibration Pads and RCC/Cement concrete Foundation, 1 Nos 100 mm dia dial type pressure gauges on outlet shall also be provided. The cost quoted by the contractor for this deemed to be included.

Supply, install, test and commission centrifugal monoblock pump for pumping centrifuse filtrate to equalisation tank all as specified. The pump shall be suitable for the given duty points . There shall be two pumps, one working and one will be stand by. Motor shall be energy efficient conforming to IS 12615.

(i) Water Quantity- 50 Litre per minute (ii) Static Head -10 M (iii) Speed - 1450 RPM (iv) Impeller - Bronze (v) Shaft - High Tensile steel (vi) Pump/motor body- CI (vii) Seal - Mechanical (viii) Motor - Suitable HP, Sqirrel Cage SPDP, Class 'B' Insulation (ix) Base frame - Fabricated MS (x) Foundation - RCC/PCC Foundation as per OEM Recommendations Note:-The each pump should be provided with Anti Vibration Pads and RCC/Cement concrete Foundation, 1 Nos 100 mm dia dial type pressure gauges on outlet shall also be provided. The cost quoted by the contractor for this deemed to be included.

Supply, install, test and commission centrifugal monoblock feed pump for pumping treated water to oxidation pond all as specified. The pump shall be suitable for the given duty points . Out of three pumps, two shall be working and one will be stand by. Motor shall be energy efficient conforming to IS 12615.

(i) Water Quantity- 243 Litre per minute (ii) Static Head -19 M (iii) Speed - 1450 RPM (iv) Impeller - Bronze (v) Shaft - High Tensile steel (vi) Pump/motor body- CI (vii) Seal - Mechanical (viii) Motor - Suitable HP, Sqirrel Cage SPDP, Class 'B' Insulation (ix) Starter - DOL (x) Base frame - Fabricated MS (xi) Foundation - RCC/PCC Foundation as per OEM Recommendations Note:-The each pump should be provided with Anti Vibration Pads and RCC/Cement concrete Foundation, 1 Nos 100 mm dia dial type pressure gauges on outlet shall also be provided. The cost quoted by the contractor for this deemed to be included.

Supply, install, test and commission centrifugal monoblock filter feed pump for pumping treated water to pressure filter all as specified. The pump shall be suitable for the given duty points . Out of three pumps, two shall be working and one will be stand by. Motor shall be energy efficient conforming to IS 12615.

(i) Water Quantity- 265 Litre per minute (ii) Static Head -30 M (iii) Speed - 1450 RPM (iv) Impeller - Bronze (v) Shaft - High Tensile steel (vi) Pump/motor body- CI (vii) Seal - Mechanical (viii) Motor - Suitable HP, Sqirrel Cage SPDP, Class 'B' Insulation (ix) Starter - DOL (x) Base frame - Fabricated MS (xi) Foundation - RCC/PCC Foundation as per OEM Recommendations Note:-The each pump should be provided with Anti Vibration Pads and RCC/Cement concrete Foundation, 1 Nos 100 mm dia dial type pressure gauges on outlet shall also be provided. The cost quoted by the contractor for this deemed to be included.

Supply, install, test and commission centrifugal monoblock pump for pumping centrifuse filtrate to equalisation tank all as specified. The pump shall be suitable for the given duty points . There shall be two pumps, one working and one will be stand by. Motor shall be energy efficient conforming to IS 12615.

(i) Water Quantity- 50 Litre per minute (ii) Static Head -10 M (iii) Speed - 1450 RPM (iv) Impeller - Bronze (v) Shaft - High Tensile steel (vi) Pump/motor body- CI (vii) Seal - Mechanical (viii) Motor - Suitable HP, Sqirrel Cage SPDP, Class 'B' Insulation (ix) Starter - DOL (x) Base frame - Fabricated MS (xi) Foundation - RCC/PCC Foundation as per OEM Recommendations Note:-The each pump should be provided with Anti Vibration Pads and RCC/Cement concrete Foundation, 1 Nos 100 mm dia dial type pressure gauges on outlet shall also be provided. The cost quoted by the contractor for this deemed to be included.

Supplying, installing, testing and commissioning of non clog submersible sewage water pump with motor for pumping sewage water from equalization tank to MBBR Reactor all as specified. Discharge 486 LPM, head 10 mtr, suitable for 230 Volts AC supply, having energy efficient motor conforming to IS 12615

Supplying, installing, testing and commissioning of non clog submersible sewage water pump with motor for sewage pumping station having discharge 1173 LPM and head 22 mtr. All Pumps shall have sensors to automatically start and stop at predetermined level of sewage water level in sewage well and connected with SCADA. Cost of sensors and connection with SCADA including control cable and power cable as required on site for connecting submersible pump set to LT panel is deemed to be included in quoted cost.

Supplying, installing, testing and commissioning of non clog submersible sewage water pump with motor for sewage pumping station having discharge 587 LPM and head 22 mtr. All Pumps shall have sensors to automatically start and stop at predetermined level of sewage water level in sewage well and connected with SCADA. Cost of sensors and connection with SCADA including control cable and power cable as required on site for connecting submersible pump set to LT panel is deemed to be included in quoted cost.

Supplying, installing, testing and commissioning of non clog submersible sewage water pump with motor for sewage pumping station having discharge 281 LPM and head 26 mtr. All Pumps shall have sensors to automatically start and stop at predetermined level of sewage water level in sewage well and connected with SCADA. Cost of sensors and connection with SCADA including control cable and power cable as required on site for connecting submersible pump set to LT panel is deemed to be included in quoted cost.

Supply, install, test and commission submersible sewage water pump for sewage pumping station having discharge 141 LPM and head 26 mtr. All Pumps shall have sensors to automatically start and stop at predetermined level of sewage water level in sewage well and connected with SCADA. Cost of sensors and connection with SCADA including control cable is deemed to be included in quoted cost

Supplying, installing, testing and commissioning of non clog submersible sewage water pump with motor for sewage pumping station having discharge 450 LPM and head 20 mtr. All Pumps shall have sensors to automatically start and stop at predetermined level of sewage water level in sewage well and connected with SCADA. Cost of sensors and connection with SCADA including control cable and power cable as required on site for connecting submersible pump set to LT panel is deemed to be included in quoted cost.

Supplying, installing, testing and commissioning of non clog submersible sewage water pump with motor for sewage pumping station having discharge 225 LPM and head 20 mtr. All Pumps shall have sensors to automatically start and stop at predetermined level of sewage water level in sewage well and connected with SCADA. Cost of sensors and connection with SCADA including control cable and power cable as required on site for connecting submersible pump set to LT panel is deemed to be included in quoted cost.

Supplying, installing, testing and commissioning of non clog submersible sewage water pump with motor for sewage pumping station having discharge 115 LPM and head 19 mtr. All Pumps shall have sensors to automatically start and stop at predetermined level of sewage water level in sewage well and connected with SCADA. Cost of sensors and connection with SCADA including control cable and power cable as required on site for connecting submersible pump set to LT panel is deemed to be included in quoted cost.

Supplying, installing, testing and commissioning of non clog submersible sewage water pump with motor for sewage pumping station having discharge 57LPM and head 19 mtr. All Pumps shall have sensors to automatically start and stop at predetermined level of sewage water level in sewage well and connected with SCADA. Cost of sensors and connection with SCADA including control cable and power cable as required on site for connecting submersible pump set to LT panel is deemed to be included in quoted cost.

Supplying, installing, testing and commissioning of non clog submersible sewage water pump with motor for pumping sewage water from equalization tank to MBBR Reactor all as specified. Discharge 208 LPM , head 10 mtr, suitable for 230 Volts AC supply, having energy efficient motor conforming to IS 12615

Supplying, installing, testing and commissioning of non clog submersible sewage water pump with motor for sewage pumping station having discharge 100 LPM and head 31 mtr. Pumps shall have sensors to automatically start and stop at predetermined level of sewage water level in sewage well a. Cost of sensors, control cable and power cable as required on site for connecting submersible pump set to LT panel is deemed to be included in quoted cost.

Supplying, installing, testing and commissioning of non clog submersible sewage water pump with motor for sewage pumping station having discharge 50 LPM and head 31 mtr. Pumps shall have sensors to automatically start and stop at predetermined level of sewage water level in sewage well and connected with SCADA. Cost of sensors and connection with SCADA including control cable and power cable as required on site for connecting submersible pump set to LT panel is deemed to be included in quoted cost.

Supplying, installing, testing and commissioning of non clog submersible sewage water pump with motor for sewage pumping station having discharge 759 LPM and head 24 mtr. Pumps shall have sensors to automatically start and stop at predetermined level of sewage water level in sewage well and connected with SCADA. Cost of sensors and connection with SCADA including control cable and power cable as required on site for connecting submersible pump set to LT panel is deemed to be included in quoted cost.

Supplying, installing, testing and commissioning of non clog submersible sewage water pump with motor for sewage pumping station having discharge 379 LPM and head 24 mtr. Pumps shall have sensors to automatically start and stop at predetermined level of sewage water level in sewage well and connected with SCADA. Cost of sensors and connection with SCADA including control cable and power cable as required on site for connecting submersible pump set to LT panel is deemed to be included in quoted cost.

Supply, install, commission and test oil free air blower tri-lobe with accoustic enclosure and self tensioning system suitable for out let flow or free air delivery 198.61 CFM or 337 M3/hr air at rated pressure 0.65 Kg/cm2 with suitable energy efficient totally enclosed squirel cage induction motor conforming to IS 12615 including automatic star delta starter of suitable rating as recommended by OEM, design for continuous duty IP55 having enclosure TEFC and F class insulation ( to supply air to MBBR Reactor, equalisation tank ). The complete blower assembly shall be supplied with microprocessor based control panel within canopy. Necessary pipe line with valve shall be measured and paid for separately. Blower will have sound proof enclosure to restrict noise level to 72 dB at 1 mtr from blower complete all as specified. Note:- Cost of necesary foundation of blower is deemed to be included in the quoted cost. These blower shall be installed out side the pump house as shown in drawing.

Supply and spread of floating media for MBBR reactors of size as per OEM, material of construction PP wagon wheel design, having density less than water. The surface area of media shall be minimum 500 Sqm/CUM

Supply, instal, test and commission Dual media filter in mild steel construction bituminous painted tank for flow of 227 LPM including valves, foundation all as specified having Min inside dia of vessel 0.80mtr and media ht (Min) 0.915 mtr and overall ht (Min) 1.875 mtr

Supply, install, test and commission activated carbon filter for flow of 227 LPM including valves, foundation all as specified having Min inside dia of vessel 0.90 mtr and media ht (Min) 1.0 mtr and overall ht (Min) 1.875 mtr.

Supply, instal, test and commission Dual media filter in mild steel construction bituminous painted tank for flow of 265 LPM including valves, foundation all as specified having Min inside dia of vessel 0.82 mtr and media ht (Min) 0.915mtr and overall ht (Min) 1.875 mtr

Supply, install, test and commission activated carbon filter for flow of 265 LPM including valves, foundation all as specified having Min inside dia of vessel 0.92 mtr and media ht (Min) 1.0 mtr and overall ht (Min) 1.875 mtr.

Supply, install, test and commission sludge pump for sludge transfer from sludge holding tank to centrifuse machine suitable for 0.50 M3/hr capacity. sludge having concentration of 5%. Discharge head 30 mtr complete all as specified.

Supply, install, test and commission batch type centrifuse machine suitable to handle sludge generated from 0.7 MLD STP suitable for 45 Kg per batch all as specified.

Supply, install, commission and test hypo dosing pump consisting of metering type dosing pump for 1.0 LPH at 5 Kg/cm2 PP head and PVC fitting and LDPE/ HDPE dosing tank of 100 litre capacity complete all as specified. Chlorine to be maintained 2 PPM and flow rate of treated water is 7.25 Cum/ hour. Out of two pump one pump will be working and one will remain as standby

STAINLESS STEEL PIPES FOR COMPRESSED AIR Supply, install, test and commision stainless steel 304 Pipe of 50 mm dia thickness 12 SWG (For equalisation tank and MBBR Reactor).

Supply, install, test and commision stainless steel 304 Pipe of 25 mm dia thickness 12 SWG (For MBBR tank and equalisation tank)

Supply, fix test and commission silicon course bubble difffuser having disc dia as 150 mm appx, size of bubble 4 to 5 mm with air flow rate as 4 to 5 Cum/Hour at pressure 0.65 Kg/cm2 to be fitted in stainless steel air grid inside the equalisation tank and having min port as 8 for air to escape all as specified

Supply, fix, test and commission fine air bubble tubular diffuser of Silicon having min dia 50 to 63 mm and length 600 mm to create fine bubble of 1 to 2 mm dia with air flow rate as 4 to 5 Cum / Hours at pressure 0.65 Kg/cm2 to be fitted in stainless steel air grid inside the MBBR Chamber

PIPING FOR SEWAGE Supply, install, test and commision DI Pipe of class K-7 grade 80 mm dia for pumping. Pipe shall be ISI marked and it will have inner lining conforming to IS and all as specified.

Supply, install, test and commision DI Pipe of class K-7, 100 mm dia for pumping. Pipe shall be ISI marked and it will have inner lining conforming to IS and all as specified.

Supply, install, test and commision DI Pipe of class K-7, 150 mm dia for pumping. Pipe shall be ISI marked and it will have inner lining conforming to IS and all as specified.

Supply, install, test and commision DI Pipe of class K-7, 200 mm dia for pumping. Pipe shall be ISI marked and it will have inner lining conforming to IS and all as specified.

Supply, install, test and commision DI flanged Pipe of Class-K-9, 80 mm dia to be connected with pumps as per schedule and as specified.

Supply, install, test and commision DI flanged Pipe of Class-K-9, 100 mm dia to be connected with pumps as per schedule and as specified.

Supply, install, test and commision DI flanged Pipe of Class-K-9, 150 mm dia to be connected with pumps as per schedule and as specified.

Supply, install, test and commision MS flanged Pipe of Heavy grade 65 mm dia to be connected with submersible pump in sewage well all as shown in drawing and as specified.

Supply, install, test and commision MS flanged Pipe of Heavy grade 50 mm dia to be connected with submersible pump in sewage well all as shown in drawing and as specified.

Supply, install, test and commision Cast Iron foot valve 80 mm dia ISI marked complete all as specified and directed.

S&F DI flanged pipe fittings like bend any type of any radius, tee, collar, cap etc suitable upto 200 mm dia pipe.

S&F jointing rubber gasket for DI flanged pipe of 80 mm dia

S&F jointing rubber gasket for DI flanged pipe of 100 mm dia

S&F jointing rubber gasket for DI flanged pipe of 150 mm dia

S&F jointing rubber gasket for MS flanged pipe of 65 mm dia

S&F jointing rubber gasket for MS flanged pipe of 50 mm dia

HEADER PIPE M&L for MS ERW pipe of 150 mm dia, 1.5 mtr long to work as header with submersible pump.

M&L for MS ERW pipe of 200 mm dia, 1.5 mtr long to work as header with submersible pump.

M&L for MS ERW pipe of 300 mm dia, 2.0 mtr long to work as header with submersible pump.

M&L for MS ERW pipe of 400 mm dia, 2.0 mtr long to work as header with submersible pump.

Note for item No 109.00 to 112.00 (MS ERW Pipe) :- Three pipes coming out from sewage well are to connected by welding. Making hole to match pipes to be connected and then connecting pipe are part of header.

S&F Jointing material EPDM gasket for 80 mm dia DI pipe

S&F Jointing material EPDM gasket for 100 mm dia DI pipe

S&F Jointing material EPDM gasket for 150 mm dia DI pipe

S&F Jointing material EPDM gasket for 200 mm dia DI pipe

(a) MCCB 4 pole 160 Amps 35kA - 01 No (Incoming) (b) Online automatic changeover switch 4 pole 160 Amps,35 KA-01 No (c) MCB TPN 40 Amp - 03 No (One for each blower)(Outgoing) (d) MCB TPN 16 Amps - 06 Nos( for filter feed and arboriculture pump) (Out going) (e) MCB TPN 10 Amps - 04Nos (Pump for oxidation pond and for panel B)(Outgoing) (f) MCB TPN 20 amps-02Nos (panel A) (g) MCB SPN 32 Amps-01 Nos for pump house lighting) (h) MCB TPN 10 Amp- 01 Nos for yard lighting (j) Star delta starter for each pump as per OEM

(a) MCB DB TPN 08 way having control of pumps and centrifuge machine with MCB . (b) MCB DB TPN 04 way having control of pumps and centrifuge machine with. (c) MCB TPN 40 Amps -01 Nos (Incoming) (d) MCB TPN 10 Amps for centrifuge machine - 04 Nos (e) MCB SPN 10 Amps for sludge pump - 06 Nos (f) MCB SPN 05 Amps for pump for filter water-02 (g) Star delta starter for each pump as per OEM

(a) MCCB 4 pole 160 Amps 35kA - 01 No (Incoming) (b) Online automatic changeover switch 4 pole 160 Amps, 35 KA-01 No (c) MCB TPN 32Amp - 03 No (One for each air blower)(Outgoing) (d) MCB TPN 16 Amps - 07 Nos( for oxidation pound filter feed and arboriculture pump) (Out going) (e) MCB SPN 20 Amps - 01Nos (for panel B)(Outgoing) (f) MCB TPN 20 amps-01Nos (panel A) (g) MCB SPN 32 Amps-01 Nos for pump house lighting) (h) MCB SPN 6Amp- 01 Nos for yard lighting (j) Star delta starter for each pump as per OEM.

(a) MCB DB TPN 08 way having control of pumps and centrifuge machine with MCB. (b) MCB DB TPN 04 way having control of pumps and centrifuge machine. (c) MCB TPN 20 Amps -02 Nos (Incoming) (d) MCB TPN 10 Amps for centrifuge machine - 04 Nos (e) MCB SPN 10 Amps for sludge pump - 04 Nos (g) Star delta starter for each pump as per OEM.

S&F PVC insulated multicore stranded copper conductor 3 core flat submersible cable of size 2.5 sqmm complete all as specified and directed.

S&F PVC insulated multicore stranded copper conductor 3 core flat submersible cable of size 4 sqmm complete all as specified and directed.

M&L for LT/HT cable route indicator duly painted with grey colour synthetic enamel paint two coats over one coat of red oxide primer, oval shape of size 200mm x 150mm x 6mm thick cast iron disc with letters embossed and fixed on 25mm x 25mm 5mm thick MS angle iron for 50mm long including necessary PCC in 1:3:6 type C1 using 20 mm graded stone aggeregate and 15mm thick plastering all around below ground level of size 650mm x 300mm x 250mm embedded in PCC block all as specified and directed.

Supply, installation, testing and commissioning of indoor type PLC (Programmable Logic Controller) / RTU (Remote terminal Unit) based Automation, Protection Panel for STP with feature of Dual mode communication i.e. wireless Dual SIM Card based communication and wireless Radio Frequency based communication (The module should be programmed to automatically toggle between the two communication mode based on the actual signal strength available), suitable for control and monitoring of 10 Nos. Pumps, 1 Nos. Energy Meters, 3 Motorized Butterfly Valves, 3 Nos. Pressure Transmitter, 03 Nos Ultrasonic sensor, 03 Nos. Flow Meters, 01 Nos. DO Sensor, 2 Nos drives, 2.0 Nos. spectrum analyser. The panel should be of minimum size 1200 X 950 X 300 mm, front opening type, fabricated from 2.00 mm thick CRCA Sheet & mounting channel 40x40x5mm made out of Angle iron with proper ferrule & cable gland, internal wiring with PVC insulated multistranded copper conductor FRLS cable of adequate size.

(i)The Panel should be capable of performing following functions in STP all as specified and directed:- (a) Time & level based operation of lift well, equalisation tank, treated water tank pumps. (b) online monitoring of sewage & treated water parameters in desired format (c) online monitoring of electromagnetic flow meter parameters & energy consumption pumps & compressors in desired format (d) Automatic Operation of Motor Actuated Butterfly Valves /DO sensors/ compressors, etc (if required) (e) Automatic duty cycle based operations of Pumps (f) Auto Change Over In Case of Pump Failure (g) Single Phasing Prevention, phase sequence corrector, voltage unbalancing protection (h) Manual Mode Operation (all connected sub systems & operations in proposed Sewage treatment plant 2 Nos (0.7 & 0.3 Md)) from the PLC/ RTU based Control Panel.

Supply, Installation, Testing and Commissioning and Programming of Master Control Station Software and other interfaces complete all as specified and directed .

The scope includes:- Services for programming, configuration and customisation of the Smart Station Platform with respect to the STP Module(2 Nos) & 6 Nos Sewage pumping station(lift wells) as per actual site conditions and engineer- in Charge / Garrison Engineer's requirement. (a) Landing Page to depict critical parameters for STPs & sewage pumping station as per Item no 1 & 4. (b) Creation of drop down tabs to monitor the operations in Each STP and Remote PLC/ RTU Panel systems individually. Also cumulative/comparison of relevant parameters/ data of STPs / SPS (lift wells ) be depicted in desired formats. (c) Creation of individual PLC Panel wise schematics and layouts for the STPs / lift wells as per the actual site including display of all relevant parameters / data as per item 1 & item 4 (d) Soft keys for remote / manual operation of all pumps / compressors and motorised valves (optional) from the Master Control station. (e) Creation of Day wise Reports for :- (i) Run hours of pumps / compressors. (ii) Pump / valve operations / failures. (iii) Active/Return status of each equipment / sensor with date and time. (iv) Configuring notifications, alerts and alarms as per preset logic. (v) Sewage /treated water parameters, sewage receipt data at diff lift wells / STPs & treated water generation Patterns - Daily, Weekly, Monthly and Annually.

(f) The application must have run time and development licence. SCADA software must be of the same vendor as RTU/ PLCs. (g) Full development and runtime version of required tags for SCADA software suitable for digital, analog and soft inputs for STP of size 300 KLD and above as well as remote monitoring and operation of 4 to 6 sewage pumping station incl. customization of software as per the requirement and specs. SCADA software application: (i) The application must have runtime and development capabilities for any monitoring and change requirements (ii) The server and system must admit the data from registered device(s) only (iii). Must have user customizable dashboards and SLD (without any coding/ scripting). The user-interface should have minimum of following tabs (all dashboards, reports must be self-configurable without any scripting or OEM intervention) (iv) Mimic functionality with static/ dynamic symbols that can get customized according to the site(s) and must include all asset symbols of STP site (v) Reporting must be user-configurable and changeable (vi) Multi-site data viewing within same interface without any physical cable connection of sites (vii) The application must have user defined SMS/ email alerts (at least 1000 alerts per site per month) (viii) All device communication with SCADA must be secured using TLS/SSL encryption. SCADA must not support non-secure connections (ix) System must work without any need of static IP. No static IP will be provided for any location All customizations, dashboards, logic modifications, reporting, etc. in software will be the responsibility of the bidder. No extra cost will be given to the bidder for any such work during the duration of this tender. (h) All device communication must be secured using TLS/SSL encryption.

Supply, Installation, Testing and Commissioning and Programming of Master Control Station hardware and other interfaces complete all as specified and directed.

(i) Personal Computer as central Server for development version of the scada software and reporting the software with following specifiaction:- Intel 10th Gen Core I5, 8 GB RAM, 500 GB HDD, Keyboard / Mouse & 55 inches LED monitor/ LED TV (ii) 1 KVA UPS including batteries for 1/2 Hr backup (iii) A4 Size Monochrome Laser Printer. (iv) Supply, Installation, Testing, Commissioning and Programming of firewall with following specifications: - (a) Firewall throughput : - 3,700 Mbps (b) Firewall IMIX : - 2,500 Mbps (c) Firewall Latency (64 byte UDP): - 6 µs (d) IPS throughput : - 1,015 Mbps (e) Threat Protection throughput: - 240 Mbps (f) Concurrent connections: - 1,600,000 (g) New connections/sec: - 35,700 (h) IP sec VPN throughput,

Supply, Installation Testing & Commissioning of Indoor type PLC ( Programmable Logic Controller) /RTU (Remote terminal Unit) based Automation, Protection Panel for sewage pumping station (lift Well) with feature of Dual mode communication i.e. wireless Dual SIM Card based communication and wireless Radio Frequency based communication (The module should be programmed to automatically toggle between the two communication mode based on the actual signal strength available), suitable for control and monitoring of upto 4 Nos pumps with electrical parameters, 1 No electromagnetic flow meter with totalizer & 1 No ultrasonic level sensor. The panel shall be 500 x 800x 300 MM front opening type as per MES enclosure guideline as per given specification.

(i)The Panel should be capable of performing following functions in Liftwell all as specified and directed:- (a) time & level based operation of lift well, equalisation tank, treated water tank pumps. (b) online monitoring of electromagnetic flow meter parameters & energy consumption pumps & compressors in desired format (c) Automatic Operation of Motor Actuated Butterfly Valves /DO sensors/ compressors, etc (if required) (d) Automatic duty cycle based operations of Pumps (e) Auto Change Over In Case of Pump Failure (f) Single Phasing Prevention, phase sequence corrector, voltage unbalancing protection (g) Manual Mode Operation (all connected sub systems & operations in Sewage treatment plant) from the PLC/ RTU based Control Panel. (ii) the panel shall have 01 No. PLC/ RTU with following specifications:-

Supply, installation, testing, commissioning and calibration CE and UL approved manufacturer’s smart energy meter with memory / real time clock having CI 0.5 accuracy & Modbus / RTU communication over RS 485 and 1 serial port integrated with RTU as per specs mentioned in technical bid documents.

Supply, laying, testing and commissioning complete cable of different sizes, cores and length as per requirement, and armoured if required for installation of PLC, SCADA, Actuator, flowmeter PT and various other items of system as specified in tender technical specification.

Supply, installation, testing, commissioning and calibration of ON line multi parameter analyzer (COD/ BOD / TSS/ PH/ Temperature/ TDS monitors with remote display and data logging for Raw sewage at equalization tank and tertiary treated sewage effluent on TSE disposal line (make Emerson/ siemens/ Forbes marshall / UMwell).

Supply, installation, testing, commissioning and calibration of Ultrasound Level Sensor for automation existing / proposed sewage transfer pumps on duty/ standby/ duty assist mode along with connected control cables and other accessories (Make Forbes marshall, / Emerson/ ABB/ Siemens), Location Sewage sump well,/ equalization tank/ treated water tank/ ,sewage lift well etc.

Supply, installation, testing, commissioning electromagnetic online flow meter, transmitter and remote monitoring and data logging range 0-100 M3 / hr for 80 to 150 MM pipe line complete all as directed to be placed on tertiary treated sewage effluent on TSE disposal line. (Make Emerson/ Siemens / Forbes Marshall / Umwell.

Supply, installation, testing, commissioning and calibration of Do sensors, transmitters and controllers for aeration chambers to control the variable frequency drives of air blowers complete all as required and directed make Forbes marshall / Endress+Hauser/ Rosemount).

Supply, install, test, commission CE/ BIS approved UPS of 3 KVA

5 years SIM Data Cost – in RTUs for transmitting data to remote station in dual mode.

5 years Broadband/ Lease line for master control station – receiving station.

Supplying, installation, testing and commissioining batch type centrifuge machine suitable to handle sludge generated from 0.3 MLD STP suitable for 25 Kg per batch complete all as specified and directed.

PHASE-II (M&O FOR STP) Outsourcing of services for operation and periodical maintanance during defect liability period in two shifts per day including Sunday and holodays of Sewage Treatment Plant of capacity 0.30 MLD per day complete and all related equipments including keeping the installation fully operational and in healthy condition by employing of following:- 01 No Skilled operator & 01 No unskilled helper per shift of 8 Hours having knowledge of operation of Sewage Treatment plant including their connected equipments and carrying out all daily maintanance all as directed by Engineer-in-charge and as per indian electricity rules / Engineering practice and maintaining properly the installation, protective instruments complete in good condition and maintanance records, breakdown records for all as specified na das directed to the entire satisfaction of Engineer-in-charge.

Outsourcing of services for operation and periodical maintanance during defect liability period in two shifts per day including Sunday and holodays of Sewage Treatment Plant of capacity 0.70 MLD per day complete and all related equipments including keeping the installation fully operational and in healthy condition by employing of following:- 01 No Skilled operator & 01 No unskilled helper per shift of 8 Hours having knowledge of operation of Sewage Treatment plant including their connected equipments and carrying out all daily maintanance all as directed by Engineer-in-charge and as per indian electricity rules / Engineering practice and maintaining properly the installation, protective instruments complete in good condition and maintanance records, breakdown records for all as specified na das directed to the entire satisfaction of Engineer-in-charge.

NOTES FOR SERIAL ITEM NO. 138.00 & 139.00 (i) Testing of water sample shall be carried out by contractor from Govt.approved lab/registered lab monthly and the should be produced to Engineer-in-Charge for every month without fail. (ii) Contarctor shall submit ID proof, police verfication, Bank A/C deatils, Educational certificate to department and obtain approval from GE before employing person as a STP operator and helper . (iii) Payment shall be done by crossed cheque through aadhar linked bank account only and it shall not be less than minium fair wages as per act in vogue. The contractor shall submit proof of payment before claming payment. (iv) Contarctor has to submit proof of payment of ESI ( insurance ), EPF subscription made by him as applicable as per latest laws/acts before claming RAR. (v) Contarctor shall provide two set of uniform, shoes, safety belt, stationery, basic tools,log book to each employed person. (vi) STP operator should be minimum ITI qualified and done any course related to Maintanence and operation of STP from state /Govt recognised institute and having 3 years of experience in operation of STP . (vii) STP helper should be minimum 10th pass from state /Govt recognised institute. (viii) The cost of all consumables (except electricity and diesel) like media and additives, cost of monthly chemical consumption for STP laboratory etc shall be deemed to be included in the unit rate quoted. (ix) The defect liability period of STP work is two years. Therefore the rates of repair and replacement of spares etc are not included under this item. (x) Treated sludge shall be removed by the contractor free of cost outside the defence land and without any extra cost to Govt. No credit shall be taken for treated sludge from the contractor and contractor shall quopte their rates accordingly. (xi) The shift shall be maintaind as first shift - 06.00 hrs to 14.00 hrs and second shift - 14.00 hrs to 22.00 hrs.

M K ENGINEERS CO.

FRIZO INDIA PVT LTD

A K BANSAL AND CO

United Sales Corporation