Loading…
Loading…
Tender Value
₹38.2 Cr
EMD Value
₹20.6 L
Closing Date
4 Mar 2026, 3:00 pmClosed
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
SECTION1
19 conditions · 8 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less, where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of 'total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant / Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer shall submit Annual Contractual turnover Data for the Previous 3/4 Years (Contractual Payment only) as per Annexure-VI-B
The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
(b) (1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b)(2)In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarized, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows: The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway. In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract, with prior approval of Chief Engineer in writing.
Note for Item 10.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organization, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Tenderer has to submit details of Employment/partnership etc of Retired Railway Employees as per Indian Railways Standard General Conditions of Contract- April- 2022 (GCC-April-2022) with all correction slips up- todate and as given in para 24.1 of "General instructions to tenderer" attached with tender document. Tender without the information above referred to or a statement to the effect that no such retired engineer or retired Gazetted Officer is so associated with the tenderer, as the case may be, shall be rejected. Format given in ANNEXURE-XVII in attached documents.**
Similar Nature Work: Any Civil Engineering work involving fabrication and erection/launching of steel bridges/FOB.
21 conditions
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
It is the responsibility of the tenderer 1. To see corrigendum, if any to tender notice up to the date of tender opening. 2. To keep him self updated about any latest Railway Board Circulars up to the date of tender opening.
For those conditions for which standard formats have been given in the uploaded documents for providing information, it should only be submitted in these standard formats.
Postal address of Office: Office of Dy. Chief Engineer/Construction/PRYJ, Ground Floor, Bhagirathi Building, H' Block, GM office complex, Subedarganj, Prayagraj (Uttar Pradesh) 211015 Mobile Number: +91-9794835217 Email: [email protected]
Tenderers are advised to go through the 'SPECIAL CONDITIONS' thoroughly which are incorporated in tender document before quoting the rates.
Conditional tenders are liable to be rejected.
Rates are inclusive of all taxes/octroi, license fee, royalty charges etc. legally leviable by State, Central Govt. and/or any other local authority.
All required document duly Signed in ink by the Tenderer and shall be uploaded. The same person shall submit the bid who has signed all the documents to be uploaded
Provision of ramps on FOB (station 08 Nos.) Fabrication and erection of height gauges, fencing at vulnerable locations, shifting of gate booms and gate lodges at various level crossings and other miscellaneous works in Khairar-Manikpur doubling project.
CEN-2025-26-10~NCR
CEN-2025-26-10
Open
Works - General
12 Months
Prayagraj, Uttar Pradesh
₹0
₹20.6 L
4 Mar 2026
9 Feb 2026
18 Feb 2026
80 items across 2 schedules · ₹34,52,36,900.2 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Beyond 5 km upto 10 km per km | tonne- Km | 400 | 13.76 | 5,504 |
| 2 | All kinds of soil | cum | 2500 | 205.45 | 5,13,625 |
| 3 | All kinds of soil. | cum | 500 | 286.85 | 1,43,425 |
| 4 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. | cum | 1000 | 253.95 | 2,53,950 |
| 5 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. | cum | 30000 | 368.65 | 1,10,59,500 |
| 6 | 1:1.5:3 (1 Cement: 1.5 coarse sand (zone- III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 650 | 7,783.65 | 50,59,372.5 |
| 7 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 3500 | 7,365.15 | 2,57,78,025 |
| 8 | 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 650 | 6,833.4 | 44,41,710 |
| 9 | 1:3:6 (1 Cement : 3 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 6 graded stone aggregate 20 mm nominal size Recycled Concrete Aggregate (RCA) ) | cum | 650 | 5,815.05 | 37,79,782.5 |
| 10 | Foundations, footings, bases for columns | Sqm | 3500 | 307.95 | 10,77,825 |
| 11 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20mm nominal size derived from natural sources) | cum | 1250 | 9,277.75 | 1,15,97,187.5 |
| 12 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone- III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 1800 | 8,364.2 | 1,50,55,560 |
| 13 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) | cum | 500 | 10,185.05 | 50,92,525 |
| 14 | Foundations, footings, bases of columns, etc. for mass concrete | Sqm | 5000 | 307.95 | 15,39,750 |
| 15 | Suspended floors, roofs, landings, balconies and access platform | Sqm | 450 | 766.55 | 3,44,947.5 |
| 16 | Lintels, beams, plinth beams, girders, bressumers and cantilevers | Sqm | 150 | 608.35 | 91,252.5 |
| 17 | Columns, Pillars, Piers, Abutments, Posts and Struts | Sqm | 250 | 804.25 | 2,01,062.5 |
| 18 | Thermo-Mechanically Treated bars of grade Fe-500D or more. | Kg | 279000 | 89.65 | 2,50,12,350 |
| 19 | Concrete of M30 grade with minimum cement content of 350 kg /cum | cum | 1540 | 8,825.35 | 1,35,91,039 |
| 20 | Concrete of M25 grade with minimum cement content of 330 kg /cum | cum | 1100 | 10,306.2 | 1,13,36,820 |
| 21 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 250 | 6,882 | 17,20,500 |
| 22 | With F.P.S.(non modular) bricks | cum | 500 | 8,030.6 | 40,15,300 |
| 23 | With Modular bricks | cum | 200 | 7,814.65 | 15,62,930 |
| 24 | Cement mortar 1:4 (1 cement : 4 coarse sand) | cum | 200 | 8,512.1 | 17,02,420 |
| 25 | Cement mortar 1:6 (1 cement : 6 coarse sand) | cum | 10 | 8,288.35 | 82,883.5 |
| 26 | cum | 250 | 142 | 35,500 | |
| 27 | Sqm | 100 | 193.8 | 19,380 | |
| 28 | From ground level upto plinth level | cum | 50 | 6,439.2 | 3,21,960 |
| 29 | Above plinth level upto floor V level | cum | 50 | 8,069.3 | 4,03,465 |
| 30 | From ground level upto plinth level | cum | 100 | 6,240.25 | 6,24,025 |
| 31 | Providing and laying Autoclaved Aerated concrete blocks (AAC) masonry 150mm/230mm/300 mm thick AAC with Grade-1 blocks of density 551-650 kg/cum conforming to IS:2185 (Part 3) in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately). | cum | 205 | 6,994.15 | 14,33,800.75 |
| 32 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | Kg | 780000 | 111.95 | 8,73,21,000 |
| 33 | Hot finished welded type tubes | Kg | 32500 | 154.9 | 50,34,250 |
| 34 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. | Kg | 28500 | 88.5 | 25,22,250 |
| 35 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | Kg | 8000 | 142.3 | 11,38,400 |
| 36 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). | Kg | 6500 | 612.25 | 39,79,625 |
| 37 | Medium shade pigment using 50% white cement, 50% ordinary cement | Sqm | 6000 | 1,312.1 | 78,72,600 |
| 38 | Dark shade pigment using ordinary cement | Sqm | 4000 | 983.95 | 39,35,800 |
| 39 | 25 mm thick | Sqm | 6000 | 1,706.6 | 1,02,39,600 |
| 40 | Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent | Sqm | 4000 | 3,908.8 | 1,56,35,200 |
| 41 | Polished Granite stone slab of all colour and texture except Black, Cherry/Ruby Red | Sqm | 600 | 2,677.9 | 16,06,740 |
| 42 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in- charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | Sqm | 11500 | 671.55 | 77,22,825 |
| 43 | Ridges plain (500 - 600mm) | Metre | 1500 | 450.6 | 6,75,900 |
| 44 | 1:4 (1 cement: 4 fine sand) | Sqm | 1000 | 294.85 | 2,94,850 |
| 45 | 1:4 (1 cement: 4 coarse sand) | Sqm | 240 | 307.25 | 73,740 |
| 46 | Two or more coats on new work | Sqm | 4500 | 131.45 | 5,91,525 |
| 47 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | cum | 150 | 2,928.1 | 4,39,215 |
| 48 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. | Sqm | 450 | 1,719 | 7,73,550 |
| Schedule total | ₹29,77,54,447.25 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TenderDocFOB1.pdf
ATTACHMENT
GCC2022uptoACS10.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .