SPECIAL REPAIRS AND REPLACEMENT OF OLD UNSERVICEABLE SERVICE TANKS 500 LTRS WITH CONNECTED ITEMS FOR JCO OR ACCN OF HQ JUNIOR LEADER WING, THE INFANTRY SCHOOL, PROVN OF THREE PHASE ELECTRICITY CONNECTION AT PAPER RECYCLING PLANT BLDG NO E 08 OF HQ

Amount

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for laying of cables/pipes etc, and getting out in any type of soil complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for laying of cables and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed.

Removing excavated material/ surplus soil not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed.

Taking down existing damaged unserviceable CI & GI pipes of 150 mm dia with fittings from the site and taken as credit complete all as specified and as directed. Note :Earth work and excavation will be measured and paid seperately under relevent items mentioned below .

Taking down existing damaged unserviceable CI & GI pipes of 100 mm dia with fittings from the site and taken as credit complete all as specified and as directed. Note :Earth work and excavation will be measured and paid seperately under relevent items mentioned below .

Supply and fix in repairs 150 mm bore dia of Centrifugally cast(Spun) Ductile Iron Pressure pipes with socket & spigot end including all fittings ,class K-7 conforming to IS: 8329/2000 marked with and including Rubber Gaskets used with Push -on -jointing confirming to IS 5382 in any length laid in trenches complete all as specified and as directed . Note:(i) DI /CI specials such as Tee, reducer etc including joints and jointing materials will be measured and paid seperately under relevant items of this schedule. (ii) Make of DI Pipe : Jindal Ltd , Gujarat /Electro steel castings Ltd , WB / Tata Metaliks , Kolkata /M/S Jai Balaji Industries Ltd , New Delhi /M/S Jai Balaji Industries Ltd

Description all as per item no :6 here in before but of 100 mm bore dia

Supply and fix in repairs CI/DI fittings ISI Marked upto 150 mm bore such as cast iron/DI bends (any type, radius and angle), tapers any type, (straight, bend, increasing, decreasing or double sockets etc.) tee pieces single branch, 'Y' junction, double branch, cross (all socket or spigot and socket) collers, caps and plug complete all as specified and as directed. Note : Make of CI/DI Pipe fittings :Jindal Ltd , Gujarat /Electro steel castings Ltd , WB / Tata Metaliks , Kolkata /M/S Jai Balaji Industries Ltd , New Delhi /Electro Steel/NECO/Kesoram/Kejirwal

Taking up or down existing old unserviceable GI tubing and connections of 50 bore dia of pipe and taken as credit complete all as specified and as directed :-

Description all as per item no :9 here in before but of 40 mm bore dia

Description all as per item no :9 here in before but of 25 mm bore dia

Description all as per item no :9 here in before but of 20 mm bore dia

Material and labour for 50mm bore GI water tubing, medium grade with and including provision of all fittings such as bends,elbows ,tees ,short pieces ,connector ,check nuts and threadings etc laid in trenches ,on ground or fixing on wall complete all as specified and as directed. Make of GI Tube : TATA /JINDAL /ZENITH/PRAKASH/SURYA

Material and labour for 40mm bore GI water tubing, medium grade with and including provision of all fittings such as bends,elbows ,tees ,short pieces ,connector ,check nuts and threadings etc laid in trenches ,on ground or fixing on wall complete all as specified and as directed. Make of GI Tube : TATA /JINDAL /ZENITH/PRAKASH/SURYA

Material and labour for 25 mm bore GI water tubing, medium grade with and including provision of all fittings such as bends,elbows ,tees ,short pieces ,connector ,check nuts and threadings etc laid in floors/ceiling/walls complete all as specified and as directed. Make of GI Tube : TATA /JINDAL /ZENITH/PRAKASH/SURYA

Material and labour for 20 mm bore GI water tubing, medium grade with and including provision of all fittings such as bends,elbows ,tees ,short pieces ,connector ,check nuts and threadings etc laid in floors/ceiling/walls complete all as specified and as directed. Make of GI Tube : TATA /JINDAL /ZENITH/PRAKASH/SURYA

Material and labour for 1000 litres capacity Rotational moulded polyethylene (HDPE) water storage tanks, 'ISI' marked, cylindrical, vertical with closed top conforming to IS 12701-1989 having two layers wall construction with manhole lid and suitable locking arrangement including making holes for inlet, outlet and over flow pipes, hoisted, fixed in position and testing complete all as specified and as directed. Note :Make of HDPE Tank :Sintex/Polycon/Infra

Taking down old unserviceable water tank of capacity 500 Ltr and below and dismantling of all existing pipe line connections carefully and taken as credit all as specified and directed.

Supply and fix in repairs 20 mm dia ball valve , high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball for iron pipe and fixed (Min wt : 210 gm). complete all as specified and as directed.Make :Prayag/M/S Shakthi Industries

Supply and fix in repairs Gun metal gate valve for 20 mm bore dia of pipe with iron wheel head, screwed both ends for iron pipe with necessary GI fittings including taking down old unserviceable gate/ globe valve of any description and taken as credit complete all as specified and as directed .Note ;Leader/Sant/ Zoloto/KARTAR

Material and labour for Point wiring with 1.5 Sqmm single core PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded cable confirming to IS 694 drawn through on wall and including PVC casing and capping medium grade of size 20/25 mmwith all necessary fittings and provision of one run of PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly including provision of pressed steel terminal box with 3mm thick plastic laminated sheet top cover for housing switches,sockets etc concealed on wall . for one light point controlled by one switch 1 way complete all as specified and as directed. NOTE: (i) Make of PVC cable :Finolex/Polycab/Havells (ii) Make of PVC casing and capping : Avon Plast/Presto plast /Garware

One Ceiling fan controlled by one switch and regulator.

One 3 pin 05 Amps socket outlet on independent board.

All as per description of serial item No.21. here in before but one 3 pin socket outlet 5 Amp on indipendent board using 2.5 sqmm cable

All as per description of serial item No.21 here in before but for for One 3-pin socket outlet 15 Amp on independent board with 4 sqmm FRLS PVC multistranded copper conductor cable including 4 sqmm FRLS PVC multistranded copper conductor cable as earth continuity wire.

Supply and fix in repair Double wall corrugated high density polymer ethyl pipe of size 110 mm outer dia with ISI marked (IS 14930- 2001 ), laid in trenches /floors and fixed on wall/ pole with and including necessary fittings such as bends, sockets & other connected accessories etc for laying of electric cables, complete all as specified and as directed. Make - Duraline, Astral (Rex ), Tirupati, Tijaria,Ketron.

Supply ,lay and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 70 sqmm 3.5 core laid in trenches/fixed on wall and roof, floor etc complete all as specified and as directed.. . Note :Make of XLPE Cable; Gloster/Polycab/CCI

S&F energy saving box type batten light fitting 230 volts surface mounted complete with high effeciency glare free light LED lamp 20 watt with end caps with all accessories, pre- wired, including providing flexible copper wire twin core cable complete all as specified and directed by enginer in charge. Make :- Havells cat part No batten LHEXBXPNIN1W020 HSN code 9405 Crompton/Philips /Wipro

Supply and fix Socket outlet 2 in 1, 3 and 5 Pin 5 Amps, 230 Volts AC circuit complete all as specified and as directed . Make : Anchor/Legrand/Indo Asian

Supply and fix Socket outlet 2 in 1, 3 Pin 5 & 15 Amps, 230 Volts AC circuit ,flush type , multi purpose complete all as specified and as directed . Make : Anchor/Legrand/Indo Asian

Supply and fix Switch piano type 5 Amps flush button 240 volts AC ,single pole , one way, complete all as specified and as directed. Make -Anchor /Legrand/Cona

Supply and fix Switch piano flush type single pole, one way 15 Amps 230 Volts AC circuit complete all as specified and as directed . Make : Anchor/Legrand/Indo Asian

Supply and fix ceiling rose ,surface bakelite, size 65x50mm , 3 terminal suitable for 230 volts AC supply, complete all as specified and as directed.Make : Anchor/Legrand/Indo Asian

Supply and fix industrial wall mounted plug socket suitable for IP 44 degree of protection 3 phase, nuetral and earth of amp rating 32 Amp complete all as specified and directed.

Material and labour for Submain wiring complete with 1100volt grade FRLS PVC insulated unsheathed multistranded cable with 1100volt grade 02 runs of 4.0 sqmm copper conductor cable confirming to IS 694 drawn through and including rigid non metallic PVC CONDUIT in Ivory/Grey/white colour medium grade etc fixed in wall/ceiling including provision of 01 run of 4.0 sqmm FRLS PVC unsheathed copper conductor and Connected to earth dolly including dismantling of old unserviceable submain wiring of aluminium conductor cable of any size and taken as credit complete all as specified and as directed. Notes: (i) Two different color wires shall be used for phase and neutral . (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles . (iii)02 run of 4.0 sqmm and 01 run of 4.0 sqmm including 01 run of PVC conduit will be measured as one length (iv)Make of PVC copper conductor cable:- Finlex/Poly cab/ Havells. (v) Make of PVC conduit :Avon plast/Presto plast /Garware"

Material and labour for Submain wiring complete with 1100volt grade FRLS PVC insulated unsheathed multistranded cable with 1100volt grade 02 runs of 1.5 sqmm copper conductor cable confirming to IS 694 drawn through and including rigid non metallic PVC CONDUIT in Ivory/Grey/white colour medium grade etc fixed in wall/ceiling including provision of 01 run of 1.5 sqmm FRLS PVC unsheathed copper conductor and Connected to earth dolly including dismantling of old unserviceable submain wiring of aluminium conductor cable of any size and taken as credit complete all as specified and as directed. Notes: (i) Two different color wires shall be used for phase and neutral . (ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/ copper thimbles . (iii)02 run of 1.50 sqmm and 01 run of 1.5 sqmm including 01 run of PVC conduit will be measured as one length (iv)Make of PVC copper conductor cable:- Finlex/Poly cab/ Havells. (v) Make of PVC conduit :Avon plast/Presto plast /Garware"

Supply and fixing Factory made epoxy powder coated distribution board double door TPN 4 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.0mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and including provision of MCCB 4 Pole, 415 V, 100 A, 16KA-01 complete all as specified & directed. Make :Havells/Legrand/Indo Asian

Supply and fix Factory made epoxy powder coated distribution board SPN 4 ways double door with IP-43 protection) fabricated from minimum 1.0 mm thick CRCA sheet and fixed flush on wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts complete all as specified and as directed . Note :Make : Indo Asian/HAVELLS/L&T

Supply and fix amp rating 240V, 10KA miniature circuit breaker (MCB) of TP 40 AMP following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified.Make :Havells/Legrand/Indo Asian

Supply and fix amp rating 240V, 10KA miniature circuit breaker (MCB) of SPN 32 AMP following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified.Make :Havells/Legrand/Indo Asian

Supply and fix amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 6 to 16 AMP following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. complete all as specified.Make :Havells/Legrand/Indo Asian

Material and labour for Electrical earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground vertically, (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level, connected to GI wire 4mm dia (7.5 metre long) by means of bolts, nuts, washers made of galvanized iron connected to earthing to body of equipment. GI wire protected by 15mm dia light grade GI pipe (7.5 metre long) and watering arrangements with 20 mm dia GI pipe medium grade and GI funnel all as specified and shown in Electrical Plate No 3 of MES Schedule (SSR) Part I including necessary excavation and earth work in any type of soil, charcoal dust salt, and PCC 1:2:4 type B1 in chamber, RCC 1:2:4 type, B1 cover slab, 40mm thick with 6mm dia mild steel bars at 100mm centre to centre both ways and with 6mm dia MS hook complete, and testing of Earth resistance complete all as specified and as directed.

Material and Labour for Earthing complete with galvanised earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground in vertical position, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below ground level connetced with galvanised iron earthing strip of size 25 mm x 4 mm by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary excavation & earth work, returning filling and removal of surplus earth upto a distance not exceeding 50 Mtr etc all as shown on electrical plate No. 3 of MES Schedule Part-I complete to obtain less than 1 Ohm earth resistance, fixed in repairs including taking out existing old unservicableearthing materials of any description and taken as credit complete all as specified and as directed.. NOTE : (i) Cost of this items includes the scope of earth work viz :charcoal, salt, PCC, RCC pit cover of required size. (ii) Unit rate of this items includes the cost of galvanised iron strip upto 7.5 metre. After 7.5 metre, strip shall be measured and paid for separately. (iii) Suitable porcelain insulator with a gap of 30cm with Bronze test point of MES pattern shall also be deemed to be included in the quoted rate by the contractor.

Supply and fix in repair Double wall corrugated high density polymer ethyl pipe of size 63mm outer dia with ISI marked (IS 14930- 2001 ), laid in trenches /floors and fixed on wall/ pole with and including necessary fittings such as bends, sockets & other connected accessories etc for laying of electric cables, complete all as specified and as directed. Make - Duraline, Astral (Rex ), Tirupati, Tijaria,Ketron.

Supply only cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 4 Core with suitable size of lugs etc and connection complete all as specified and directed.Make :- Legrand /L&T/Havells/Indo Asian

Material and labour for Boring of road crossing of size 100 mm dia at suitable depth by trenchless technology using machinery / equipments complete without damaging the surface for passing pipes / cables etc. suitable for and including provision of HDPE pipe of 100 mm dia , working pressure 0.4 mpa including removing excavated soil to a distance n exc 50m complete all as specified and as directed. Note : (i) Location of boring holes shall be decided by the Engr-in-Charge as per requirement, nothing extra shall be payable on account of variation in length of crossing of road etc. (ii) During boring soil strata may be changed, hence nothing extra shall be paid to the contractor for boring of holes through different strata/different type of soil. Tenderer is hereby advised to keep in mind this aspect while quoting his rate under this item.

S&F as in repairs LT Panel Outdoor type floor mounted free standing dust and vermin proof panel / DB with IP-55 protection, CPRI approved, frame fabricated out of 40mm x 40mm x 4mm angle iron, 3 mm thick CRCA sheet for entire outer panel with single door and locking arrangements & 1.6 mm for inner compartment with 40mmx4mm flat Iron, including Separate cubicle chamber with cable alley not less than 300mm width for installation/connecting switchgears with the main bus bar using aluminium bus link or copper conductor flexible wires suitable for switch rating and connecting outgoing terminals of the switchgear with terminal blocks of appropriate current rating using flexible copper wires duly terminated by cable lugs and thimbles, MS surfaces epoxy based powder coated, shade as approved over 2 coats of red oxide primer, surfaces pre-treated in seven tank process for de-greasing, de-rusting & Phosphated, panel having front and rear opening and provision for installation of separate cable alleys, all MCCBs must be have thermal magnetic relrase, busbar chamber and switchgear compartments, Provision in cable alleys for bottom cable entry for incoming & outgoing cables, affixing MV danger plate at suitable intervals / locations including erection, testing and commissioning complete all as specified and directed including the following fixtures and fitments mentioned as follows.

Outgoing:- Separate cubical chamber with a cable alley not less than 300 mm width for installation/connecting the following switch gear with the main bus bar using aluminium bus link or copper conductor flexible wires suitable to the switch rating and connecting outgoing terminals of the switch gear with terminal blocks of appropriate current rating using flexible copper wires duly terminated by cable lugs and thimbles. (i) MCCB, 4 pole 100 A, 25 KA - 4 No Make of MCCB: L&T / Seimens / Schneider / ABB

Note:- (i) A clear space of 200mm shall be kept from floor level for switchgear compartment. (ii) Air ventilation breathers with exhaust fan plastic body 100mm sweep to be provided for heat dissipation. Suitable sized knock-out holes for cable glands shall be provided. (iii) Each compartment shall be numbered / lettered as approved by GE. (iv) LT panel shall be fixed in existing location and the disturbed surrounding surfaces shall be made good as per exising specifications. The cost of making good shall be deemed included in unit quoted rate. (v) Contractor shall submit the GA drawings of LT Panel for approval of GE before placing the bulk order

Supply and laying XLPE insulated, armoured, heavy duty, 1100 Volts grade aluminium conductor cable Cross sectional area 35 Sqmm, 3.5 core in trenches or fixed to wall / passing through pipe / pole and testing compete all as specified and directed. Note : (i) Excavation & earth work, Brick protection and sand cushining shall be measured and paid for separately.Make Polycab/Havells/Plaza/KEI

Supplying and laying as in repairs 80 mm bore GI tubing light grade incl all accessories for passing of cables for mechanical proctection, laid under Plinth / Floors/ Paths Culverts or fixed on wall or concealed in wall / floor or along poles or as street light poles or as street light mounting bracket with complete accessories such as bends / sockets / reducers / saddles incl necessary threading / drilling works all as specified and directed.

M/S ADITYA CONSTRUCTIONS (BID ID -3141668)

M/S VISHWAROOP ELECTRONICS AND ELECTRICALS (BID ID -3144712)