Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹4.7 CrAccepted-AOC | ₹4.7 Cr | 1 | Accepted-AOC Bidder quoted less than estimate value |
| 2 | Rejected-Technical | - | - | Rejected-Technical TECHNICALLY NON RESPONSIVE |
| Sl No | Description | Qty | Unit | ZERO GRAVITY L1 |
|---|---|---|---|---|
| 1.00 | Clearing the Site - Clearing Heavy Jungle | 6,825 | 1 M² | 9.17 ₹62,585.25 |
| 2.00 | Earth work excavation for foundation by Mechanical means for Isolated & Combined Footing etc in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 100 mts and clearing and levelling including dressing of sides and raming of bottoms etc., complete complying with standard specification and as directed by the departmental officers (Upto 2.40m Footing Depth) | 100 | 1 M³ | 373.15 ₹37,315 |
| 3.00 | Earth work Open excavation by Mechanical Means for Open Earthwork in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 100 mts and clearing and levelling including dressing of sides and raming of bottoms etc., complete complying with standard specification and as directed by the departmental officers. (Upto 2.40m Depth) | 145 | 1 M³ | 199.91 ₹28,986.95 |
| 4.00 | Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. | 13 | 1 M³ | 1,826 ₹23,738 |
| 5.00 | Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers - Mixing by mechanical means | 49 | 1 M³ | 5,536 ₹2.7 L |
| 6.00 | Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 2.10M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton and as directed by the departmental Officers (Payment for centering shall be given after the concrete is laid) | 620 | 1 M² | 537 ₹3.3 L |
| 7.00 | Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers. - Mixing by mechanical means | 103 | 1 M³ | 7,032.3 ₹7.2 L |
| 8.00 | Providing and laying in position, Standardised Concrete Mix M-30 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 400 kg/m3 and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m’) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials). For Foundation and Basement | 64 | 1 M³ | 8,795.1 ₹5.6 L |
| 9.00 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc., which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner , vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid). | 248 | 1 M² | 708.8 ₹1.8 L |
| 10.00 | Supplying and erecting steel centering including necessary supports For plane surfaces such as rectangular or square RCC columns etc., which require only nominal strutting using mild steel sheets made of 10 gauge thick welded with MS angle size 40mm x 40mm x 5 mm and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick).etc..complete in all floors complying with standard specifcation. Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid). | 94 | 1 M² | 645.88 ₹60,712.72 |
Updated dates
Tender Value
₹4.8 Cr
EMD Value
₹9.6 L
Closing Date
30 Jan 2026, 3:00 pmClosed
Commissioner
Tirupur City Municipal Corporation Office,Tiruppur
Construction of multi-Purpose Sports stadium in Amarjyothi Garden area at Tirupur Corporation
2026_MAWS_642362_1
593/2025-26/Z3/CE,TCMC
Open Tender
Civil Works
90 days
Tiruppur City Municipal Corporation Office
Construction of multi-Purpose Sports stadium in Amarjyothi Garden area at Tirupur Corporation
5 documents required · 5 mandatory
₹0
₹9.6 L
Tiruppur City Municipal Corporation Office
7 Mar 2026
12 Jan 2026
30 Jan 2026
12 Jan 2026
30 Jan 2026
12 Jan 2026
20 Jan 2026
Clearing the Site - Clearing Heavy Jungle
Earth work excavation for foundation by Mechanical means for Isolated & Combined Footing etc in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 100 mts and clearing and levelling including dressing of sides and raming of bottoms etc., complete complying with standard specification and as directed by the departmental officers (Upto 2.40m Footing Depth)
Earth work Open excavation by Mechanical Means for Open Earthwork in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 100 mts and clearing and levelling including dressing of sides and raming of bottoms etc., complete complying with standard specification and as directed by the departmental officers. (Upto 2.40m Depth)
Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers - Mixing by mechanical means
Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 2.10M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton and as directed by the departmental Officers (Payment for centering shall be given after the concrete is laid)
Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers. - Mixing by mechanical means
Providing and laying in position, Standardised Concrete Mix M-30 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 400 kg/m3 and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m’) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials). For Foundation and Basement
Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc., which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner , vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid).
Supplying and erecting steel centering including necessary supports For plane surfaces such as rectangular or square RCC columns etc., which require only nominal strutting using mild steel sheets made of 10 gauge thick welded with MS angle size 40mm x 40mm x 5 mm and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick).etc..complete in all floors complying with standard specifcation. Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid).
Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers.
Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc., conforming to IS specification including primer coating and enamel painting as per design given by the departmental officers etc., complete as per standard specification.
Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire). (For Upto Plinth / Basement level)
Sub-Base Layer: Supply, laying and compaction of a crushed stone aggregate base course 40mm Blue Metal 100mm, 20mm Blue Metal 100mm, 6mm Dust 50mm, M-Sand 50mm depending on soil conditions). Compaction of the natural soil subgrade to achieve 95% Proctor Density.Supply, laying, and precise leveling of a fine aggregate layer (Dust / M sand) to achieve a perfectly level surface with a slope of 0.5% - 1% for drainage. the cost including the labour and transportation of material to the site etc., complete complying with standard specification.
Turf System - Supply & Installation : Supply of the Turf System with Following Specification as directed by departmental officers the cost includes all the materials, and labour charges etc., complete complying with standard specification. Product Specifications: Brand Name: Bellinturf Dynamic (FIFA QUALITY PRO) Roll Width: 2M/4M Colour: Field Green & Lime Green Roll Length: On request Yarns Structure: Monofilament Composition (FIFA Test method 22): PE Tape thickness (FIFA Test Method 25): 400 µm±20 µm Colour change (EN ISO 20105-A02): ≥Grey scale 3 Number of strands per tuft: 12strands Dtex (FIFA Test method 23): 16,000 ±10% Tape width (FIFA Test Method 25): 1.34 mm±0.1 mm Tensil strength (EN13864): Percentage change from unaged to be no more than 25% Turf Pile height (S02549): 50mm±5% Stitch/10cm (I501763): 14±5% Yarn weight (S08543): 1,617g/m²±10% Gauge (ASTM D5793): 5/8 inch Density/m² (I501763): 8820±10% Tuft withdrawal force (FIFA Test Method 26): ≥40N.
Backing Primary backing: Double PP Cloth fabric+Mesh Weight: 245g±10% Secondary backing: Black PU Total weight (S08543): 2,700g/m²±10% Water Permeability (FIFA Test Method 24): ≥180mm/h. INFILLS Sand Size range (FIFA Test Method 20): 0.3-0.8mm Application rate: 25-30kg/m²±15% Rubber granules Size range (FIFA Test Method 20): 2-3mm Application rate: 10-15kg/m²±15%. Installation of Turf Done using a seam tape & suitable PU adhesive. Adhesive TDS should match the following basic properties: Colour & Form : Grass- green paste, Characteristics: 2 component, polyurethane – reaction adhesive for outdoor use, Specific Gravity : 1480 g/litre, Viscosity: Thixotropic, Solids: 100%, Application: Notched trowel or by suitable machine for applying to Seaming Tape. Including Cost of louding ,unloading Transportation, accessories and labour charges etc., complete.
Fencing & Netting System : Supplying and Erection of Fencing and Netting System with Following Specification as directed by departmental officers the cost includes all the materials, and labour charges etc., complete complying with standard specification. ( As Per Lowest Quotation ) Mesh Size: 2.5 MM THICKNESS 50 MM GAP Brand : Garware Nets Material options: Nylon Color options: White, Green, Black, Blue Hole Shape options: Square Shaped Nets Hardware: Heavy Duty Industrial bearing for overall net support, 5 aside, 7aside and 9aside ground partition, This bearing is essential for allowing the movable partitions (which would likely be frame and net systems) to slide, fold, or rotate easily and reliably to change the field size for different game formats.
Manufacturing, supplying and fixing of 75mm thick slab (using 20mm HBGS Jelly) Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two crushed stone sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed by the departmental officers.
Supply, erection, testing and commissioning of Main Control Panel of 75 HP, 56 KW Rating Wall Mounted Type fabricated using CRCA sheet, hinged lockable door, dust and vermin proof with following provisions: MAIN PANEL Incomer: 160A 4 Pole MCCB (M-1870) - 2 No Metering Devices - Multi function meter with CL 0.5 (M-2527) which can read Current, Voltage, KW, KHhr, Power Factor, THD - 1 No RYB Indication lamps - 6No Out Goings: MCB ISOLATORS - HIGHER END - 100A - TP (M-1838)- 1No MCB ISOLATORS - HIGHER END - 63A - TP (M-1836)- 5No MCB ISOLATORS - HIGHER END - 32A - TP (M-1830)- 1No Add On Block, Terminal Block, Power Wiring, Control Wiring, Connectors, Cable Lugs, Slotted Cable Cover The above panel mounted on wall using anchor fasteners bolts, plugs, incoming and outgoing cable connection and all works carried out as per standard methods and as directed by the Departmental Officers.
Supply and fixng of TNEB meter board suitable for 3 phase 63A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 63A fuse units (500V), 1 No. neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with 1 No 63 Amp 30 MA Four Pole RCD / RCCB (Higher End) with suitable necessary connection with earth connection complete.
Supply and fixing of 100A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with PWD Earthing.
Supply and fixing of 8 way vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB as incoming and 3 nos. 32A 3P MCB, 15nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End.
Supply and laying of 3 core 185 sq.mm. armoured aluminium cable for electrical motor, control panel, pressure switch, jockey motor etc., all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers.
Supply and laying of 4 x 10 sq.mm. PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.
Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.
Supply and run of Aluminium Flat (1” x 1/4”) (25 x 6.25mm) with necessary clamps / supports on wall / floor / ground for earth connection.
Supply and run of 1 of No.8 SWG GI wire for earth connection.
Supply and run of 25mm x 3mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection.
Supply, Installation, Testing and commissioning of following lighting fixtures with all the accessories to complete the system to function. LED Sports Luminaires IP66, IK08, 5700K with system efficiency at least 100 Lumens / watt. Specification Typical Value / Range Wattage 400W LED Light Lumen Output 52,000 – 72,000 lm Efficacy 130 – 180 lm/W Input Voltage 100-277V AC (or 277-480V AC) CCT (Color) 4000K or 5000K (Standard for outdoor) CRI (Color Quality) > 70 or > 80 IP Rating IP65 or IP66 (Outdoor/Waterproof) Lifespan 50,000+ Hours (L70) Warranty 2 Years Surge Protection 6kV or 10kV.
Add G.S.T. @ 18%
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.38 MB
Tendernotice_2.pdf
PDF • 0.42 MB
01_TechnicalBidDocument.pdf
Tender Documents • 0.74 MB
01_PriceBidDocument.pdf
Tender Documents • 0.47 MB
BOQ_769597.xls
BOQ • 0.37 MB
Download all tender documents and submit your bid