GE 874/EWS-48/2023-24

Amount

BR and EM Portion

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Demolition of Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

Demolition of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets

M&L for veneered decorative plywood, Gde-1 (with BWR resign) with decorateive face veners on one side thick with nails (Nos of ply -3 Nos ) fixed with nails to timber frame /existing ceiling and wall lining (As applicable ) 4 mm thick

Plain fillet, square, rectangular or triangular in section clean sawan exc 3 Sqcm and not exc 6 sqcm secured with nails

Dismantling boarding, any description, fixed in any position with nails

Demolition of stone slab and tiles of any description or thickness in floors, approns etc laid dry or laid dry and pointed complete all as spd and as directed by Engr-in-Charge.

Dismantling structural steel work including doors, gates but excluding framed truss etc.

Taking out old serviceable glass of any description, from old wooden or metal frames, or stone, concrete or brick surrounds, any thickness or size; hacking out old putty or removing beads etc, including making good breakages in taking out and handling removing to store or stacking for reuse

Tanking down Shutters of any description exc 2 sq. m each and refixing the same opening

Rendering 15mm thick in CM 1:4 on stone masonry surfaces or surfaces other than fair faces of brickwork and finishing even & smooth without using extra cement.

Rendering 10mm thick in CM 1:6 on stone masonry surfaces or surfaces other than fair faces of brickwork and finishing even & smooth without using extra cement.

Supply only integral waterproofing compound complete all as specified and directed.

M&L for applying three coats of white wash on wall including preparation of plastered or un-plastered surfaces of walls, complete all as specified and directed.

M&L for applying three coats of white wash on Ceiling including preparation of plastered or un-plastered surfaces of walls, complete all as specified and directed.

M&L Preparation of New surfaces plastered or unplastered and applying two coat of cement base paint, white or tinted including preparation of surface complete all as specified.

M&L brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:6)

M&L for 75 mm thick Cement Conrete (1:4:8) type D2 (using 40 mm graded stone aggregate) as in sub base of floors

M&L for pre-polished Machine cut kota stone slab flooring 18-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L for Kota stone slab 18-22mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L for Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:6

M&L for Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes in CM 1:4 to receive the skirting, dado tiles etc complete all as specified and as directed.

Prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering /cladding to wall , fixed with self tapping screws as specified.

Prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering /cladding to wall , fixed with self tapping screws as specified.

6mm thick E board (classic) of size 610x610mm as in false ceiling fixed with aluminium snap grid frame work of same size as aluminium Tee of size 25x25x1.50mm as main runner, 25x25x1.25mm thick aluminium Tee as cross runner and aluminium angle of size 25x25x1.25mm at the perimeter including GI adjustable suspender of required length including taking down dismantling existing old ceiling of any description complete all as specified and directed.

M&L Mild Steel work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.

M & L for preparation of new or previously untreated surfaces of steel surfaces and applying two coats of synthetic enamel paint over a priming coat with red oxide over steel surface over 10 cm width or girth all as specified

M & L for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint over 10 cm width or girth all as specified

M&L for 75mm thick Cement concrete type C-2 (40mm graded aggregate) as in plinth protection.

Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A'.

S&F in repair 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed.

M&L for second class hardwood weather boarding, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps

All as per item above but except boarding.

M&L for applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer including preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick screed bed in CM 1:4 complete all as specified and as directed.

Taking down chowkhats or frame exc. 1.50 sqm and n.exc. 4 sqm each with shutter (w/o taking out shutter).

Taking down chowkhats or frame not exc 1.5 Sqm each ( without taking off shutters from the frame).

Dismantling of timber scantlings 40 sq cm and over in sec in any position in unframed work.

M &L for second class soft wood as in scantling clean sawn fixed in position.

M & L for second class soft wood as in scantling clean sawn fixed in position but except wood.

M&L for 2nd class soft wood plain solid chowkhats and frames wrought framed rebated on the solid rounded or chamfered, put togther with glue pineed at joints, supplied and fix

S&F 30 mm thick Flush shutters solid core construction with block board core and plywood face panels commercial type on both sides

Glazed and Skelton shutters open rebated and prepared to receive glass, gauge etc (with sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc supplied and fixed to chowkhat, 35mm thick shutter of Second Class softwood complete all as specified in SSR Part-I , Section-8, clause 8.24 (b).

Glazed and Skelton shutters open rebated and prepared to receive glass, gauge etc (with sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc supplied and fixed to chowkhat, 30mm thick shutter of Second class softwood for window and ventilator as specified in SSR Part-I , Section-8, clause 8.24 (b).

S & F M. S butt hinges 100mm long medium weight.

S&F MS butt hinges 75mm long medium weight

S & F 200mm long aluminum alloy, anodized barrel tower bolt of extruded section.

S&F 125 mm long aluminium alloy, anodised barrel tower bolt of extruded section.

S & F 250mm long aluminum alloy anodized sliding door (bolt type) and fixing clips of sheets, cast of extruded sections and fixing bolts and sliding bolts of extruded section of cast-aluminum alloy.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement, complete all as specified and directed.

M & L applying one coats of cement base paint including preparation of old plastered or unplastered surface of wall.

M & L for applying two coats of synthetic enamel point over a coat of pink primer including preparation of new wooden surface exc 10 cm width or girths.

M& for one coat of synthetic enamel paint over old wooden surfaces including preparation of surfaces over 10 Cm width or girth

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tracks or galvanised wire staples

M&L for 40mm thick PCC in 1:2:4, using 12.50mm graded stone agg as in levelling course.

M&L for Glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15 mm thick CM 1:6 for laying floor finishes complete all as specified and as directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes complete all as specified and as specified.

M & L for Vitreous china wash basin, vertically mounted fancy bowl flat back size 550 x 400 m including waste pipe and coupling 32mm for basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed including MS brackets& waste Pipe complete.

M&L for Vitreous china squatting Pan "Orrisa Pattern" size 580 x 440mm white with integral foot rests incl flush pipe of PVC 32mm dia for low level cistern fixed in repair complete all as specified

S&F PVC valve-less symphonic action type flushing cistern, low level white with inlet ball valve float and handle incl brackets (10 Ltr) capacity fixed in repair complete all as specified and directed.

Soap dish, vitreous China white, approximate size 160x 160x90mm

S&F PVC connection 15mm dia and 600mm long with PTMT nuts and washer complete all as specified.

Stop valve 15mm bore, cast copper alloy screwed down, high pressure, with crutch jor butter fly handle, screwed both ends for iron pipe or for unions

M & L for CP Pillar taps, with capstan head chromium plated 15 mm bore fancy type.

S & F Waste coupling of PTMT (half or full thread ). (Minimum weight 32 mm-45 gms / 40mm-60gms) for 32mm bore dia of discharge pipe fixed to WHB , sink .

Bib tap cast copper alloy chromium plated fancy type with crutch of butterfly handle, screwed down, screwed for iron pipe of for brass ferrule of 15mm bore (ISI marked).

S&F PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement

S&F 75mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall complete all as specified.

S&F 110mm bore PVC (SWR) pipe single socket in any length with rubber ring jointed, fixed to wall complete all as specified.

S&F 110mm bore PVC (SWR) bend or tee or radius complete all as specified.

M&L for PVC (SWR) WC connector with lip ring 110mm.

M&L for PVC (SWR) vent cowl for 75 mm dia all as specified.

M&L for PVC (SWR) Reducer 110/75mm dia all as specified.

S& F in repair for Rotational moulded polyethylene water storage tank tripple layer cylindrical vertical with closed top 1000 litre capacity hoisted and fixed in position, connecting to inlet and outlet pipe connections, with and including 20mm dia GI wash out with plug, complete all as specified and directed.

S& F in repair for Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 190gms)

Taking Down old unsv tubing galvanized iron medium grade with all fitting laid in concealed , trenches, floors or fixed to walls or ceiling, in any length, bore of pipe 15mm.

Taking Down old unsv tubing galvanized iron medium grade with all fitting laid in concealed , trenches, floors or fixed to walls or ceiling, in any length, bore of pipe 20mm.

S&F tubing galvanized iron medium grade with all fitting laid in concealed , trenches, floors or fixed to walls or ceiling, in any length, bore of pipe 15mm.

S&F tubing galvanized iron medium grade with all fitting laid in concealed , trenches, floors or fixed to walls or ceiling, in any length, bore of pipe 20mm.

S&F in repair for Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed with 20mm dia

S&F in repair for Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed with 15mm dia

M&L Lagging to pipes 15 mm dia used in internal water supply or plumbing all around with,25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of denstiv 144 ka/cum conformina to IS-9842.

M&L Lagging to pipes 20 mm dia used in internal water supply or plumbing all around with,25mm thick bonded mineral wool preformed 'SNAP ON' pipe sections of denstiv 144 ka/cum conformina to IS-9842.

Excavation over areas n exc 1.5 m deep and getting out in soft/loose soil complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc .50 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers nt exceeding 25cm and getting out in soft/loose soil complete all as specified and as directed.

Removal of excavated materials not exc 50cm and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.

Returng and filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm. complete all as specified and as directed.

Plain Cement concrete in foundation, filling & mass concrete type D2 1:4:8 (using 40 mm graded aggregate complete all as specified and as directed.

M&L for cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less including form work complete all as specified and as directed.

M & L for hardcore of broken stone boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for PCC 1:2:4 type B-1 in kerb or mud stops rounded or chamfered on edges all as specified (20mm graded aggregate) for copping, including weathering slightly rounded or chamfered using form work (Straight or curved) complete all as specified and as directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Point wiring with 1.5 Sq mm multi standerd insulated copper conductor single core PVC insulated cable 1100 volt including casing and caping for one light point controlled by one switches including 2nd class hard wood rectangular block open recessed cover with 3mm thick plastic laminated sheet cover incl PVC insulated 1.5 Sqmm copper conductor as earth wire for one light controlled by one switch completed all as specified and directed.

All as per description of item above but for 3-pin socket out let 5 Amps on same board with other switches with continous PVC insulated copper conductor cable 1.5 Sqmm earth wire.

All as per description of item above but for 3-pin socket out let 5 Amps on independent board with other switches with continous PVC insulated copper conductor cable 1.5 Sqmm earth wire.

All as per description of item above but for 3-pin socket out let 15 Amps on independent board with 2.5 Sqmm Multi std.copper conductor PVC insulated cable 1100 volts grade with continous continous1.5 Sqmm earth wire.

Supply and fixing in replacement of lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings suitable for LED bulb 7 watt. Make : Havells/Anchor/Siska/Philips/Bajaj

Supply and fixing in replacement of LED 7 Watt Bulb with B22 pin, of make Havells/ Syska/ Philips, suitable for fixing in holder as above

S&F in replacement for decorative LED batten for surface and pendant applications. Anodized extruded aluminium housing, high transmisitivity diffuser, high lumen output of VIVA MINI LED Luminaires (4FT) of 20W connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make-Havells product code LUMILINEPLUSBS20WLED865SPCSS or equivalent of approved make as approved by Engr-in-Charge

Supply and fixing in replacement of LED light fitting, 1x9 W bulk head luminaries, with lamp holders, etc. complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ. Make : Bajaj/Havells/Anchor/Philips

S&F in replacement of modular type Switch piano 6 Amps single pole one way. Make : Havells/Anchor/Philips

S&F in replacement of ceiling rose surface bakelite 65x50mm two to three terminals (ISI Marked). Make : Havells/Anchor/Philips

S&F in replacement of socket outlet 2-in-1, 3 pin, 6 Amps modular type (ISI Marked) complete all as specified and as directed by Engr-in-charge. Make : Havells/Anchor/Philips

S&F in eplacement of Switch socket combination 2-in-1 5 pin 6 Amps modular type (ISI Marked) complete all as specified and as directed by Engr-in-charge. Make : Havells/Anchor/Philips

S&F in replacement of Switch socket combination 5 in 1, 5 and 15 Amp modular type universal controlled by by one switch (ISI Marked). Make : Havells/Anchor/Philips

S&F in replacement of rectangular boards/ blocks 30x25x4cm depth closed recessed, complete all as specified and as directed by Engr-in -charge.

S&F in replacement of Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 16 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed. Make : Havells/lEGRAND/SSK

S&F in replacement of Sheet metal enclosure factory made for DBs single pole and neutral double door 240 volts 8 way with 200 Amps rated bus bar fixed on walls, including dressing and connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning and making good of wall, surfaces all as specified and directed. Make : Havells/lEGRAND/SSK

S&F in replacement of RCBO, double pole Single phase and Neutral 240 Volts , 50 H 6-63 Amps, 100mA all as specified and as directed.

S&F in replacement of amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single Pole and Neutal (SPN) 32-63 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning.. Make : Havells/Legrand/Philips

S&F in replacement of amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single Pole 5 to 32 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning.. Make : Havells/Legrand/Philips

S&F in replacement of Single phase Voltage protection relay of trip setting 85 to 500 V AC complete with connecting testing and commissioning. All as specified and directed by Engr-in-Charge

A Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp/service bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete

S&F in replacement of 1100 volt grade heavy duty cable PVC insulated multistranded aluminum stranded conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire one twin core cable flat of circular of size 16 Sqmm complete all as specified and as directed by Engr-in-Charge. Make : Havells/Anchor/Polycab/Plaza

Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) connected to galvanized iron wire 4mm dia by means of bolts, nuts and washers of galvanized iron or steel, GI light grade protection pipe 15mm dia, GI medium grade water pipe 20mm dia with funnel all as shown in electric plate No 3 of SSR-2009 pt-I and testing complete including earth work in any type of soil PCC 1:2:L4 as in earthing pit CI pit cover 5.5mm thick common salt charcoal all as specified.

Earthing complete with galvanised steel earth plate electrode 60 × 60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth strip 32x6mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion

S&F in replacement of rectification of irragular voltage, voltage stabilizer for automatic operation, single phase and neutral air cooled indoor type & designated for input variation between 90V to 290V with output voltage stabilizer at 230 V with accuracy + 2.5% 4-6 Sec initial delay and of capacity 10 KVA all as specified and directed by Engr-in-Charge Make : as approved by Engr-in-Charge

Supply and fix in replacement of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m Make : Havells/ Bajaj/USHA

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.

patriotic builders

M/S AK CONSTRUCTION

M/S SAJAA CONSTRUCTION COMAPNY

M/S ALBURAQ INFRATECH PRIVATE LIMITED

M/S AB AHAD RATHER

M/S LONE CONSTRUCTION COMPANY

POPULARHARDWARESTORE

Bidder Name

M/S AB AHAD RATHER

M/S SAJAA CONSTRUCTION COMAPNY

patriotic builders

M/S ASMATULLAH SHAH

POPULARHARDWARESTORE

M/S ALBURAQ INFRATECH PRIVATE LIMITED

M/S AK CONSTRUCTION

M/S LONE CONSTRUCTION COMPANY