REPAIRS TO FENCING, GATES AND OTHER ALLIED WORK AT RA LINES, QUEENS GARDEN, HARSHAN ENCLAVE I AND HARSHAN ENCLAVE II UNDER GE BELGAUM

Amount

Dismantling wrought iron or mild steel work of any description and in any position and taken as credit complete all as specified and as directed.

Supply and fix Rolled mild steel framed work as in doors or gates of angle or other section with gusset plate, rail,braces etc complete , prepared for hanging or sliding with and including either hook or hinges and hanging fastening and fixing complete conforming to Fe 410W (Gde E-250) quality A, completer. all as specified and as directed.

Supply and fix MS framed work (Ornamental type intricate design) as in gate including pintle hinges, stops, hand made sliding bolts etc all as per sample approved and fixed in position .complete. all as specified and as directed.

Supply and fix Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe-290 Gde- E-165 complete all as specified and as directed .

Dismantling fencing posts or struts (wood, steel or RCC.) any section including taking out embedded portion and making good disturbed ground to match with the adjoining surface and steel scrap taken as credit complete all as specified and as directed .

Supply and fix Rolled mild steel angle fixed independently, without connecting plates, etc and embedding in concrete post and struts in fencing including securing bolts and cutting tops to shape as directed, drilling holes, flat iron fillets (for securing wire mesh) confirming to Fe 410-W (Gde E-250) quality-A complete all as specified and as directed .

Demolition cement concrete of any description and in any position below or above ground level including removal of rubbish off the premises complete all as specified and as directed.

Material and labour for Plain cement concrete 1:4:8 type D2, using 40mm graded stone aggregate as in foundation filling and mass concrete,levelling courses and sub base etccomplete all as specified and as directed.

Material and labour for Plain cement concrete 1:3:6 type D2, using 40mm graded stone aggregate in foundation filling and mass concrete,levelling courses and sub base etc including demolition of existing unserviceable concrete of any description and making good the disturbed surfaces to match with the adjoining surface and removal of rubbish off the premises and serviceable items taken as credit .complete all as specified and as directed.

Material and labour for Plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in drains, coping ,bed blocks etc. including necessary form work/ moulds complete all as specified and as directed.

Material and labour for Plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in drains, coping,bed blocks etc. including necessary form work/ moulds and weathering ,slightly rounded or chamfered angles and throating as directed including demolition of existing unserviceable concrete of any description and making good the disturbed surfaces to match with the adjoining surface and removal of rubbish off the premises and serviceable items taken as credit .complete all as specified and as directed.

Material and labour for Providing Precast cement concrete louvres and jallies, 1:2:4, Type B0, using 12.5mm graded stone aggregate, 35mm thick (measured solid) including all mouldings set in cement mortar 1:4 complete all as specified and as directed . Note :Pre cast frame shall be measured and paid seperately.

Supply only Chain link MS galvanised fencing, any size or type complete all as specified and as directed.Note :Make of MS Galvanised fencing : SAIL/TATA/RINL

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire including dismantling of fencing wire mesh, any type and size and taken as credit complete all as specified and as directed .

Supply and fix Mild steel Round TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed .

Material and labour for Pre-cast cement concrete solid block masonary type C1, 1:3:6 (using 20 mm graded stone aggregate) exc 10 cm width and setting in CM 1:6 including Demolition of pre-cast concrete articles and precast concrete block walling of any description and taken as credit complete all as specified and as directed.

Material and labour for Rendering 15mm thick in cement mortar 1:4 on PCC Block masonry surfaces in two layers and finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Rendering 15mm thick in cement mortar 1:4 on PCC Block masonry surfaces in two layers and finished even and smooth without using extra cement including taking down old cement plaster on brick or stone walls built in cement mortar and removal of rubbish off the premises complete all as specified and as directed.

Material and labour for Preparation of newly plastered surfaces of wall and applying two coats of cement based paint over a coat of alkali resistent primer complete all as specified and as directed.

Material and labour for 25 mm thick PCC (1:2:4) type `B1` using 20 mm graded crushed stone aggregate as in sub base of flooring etc including necessary form work complete all as specified and as directed.

Material and labour for Rubber coated chequered cement concrete tiles of size 30cm x 30cm x 25mm thick, with grey cement and pigments and glossy finish on top, set, jointed and pointed in neat cement slurry, laid over and including 15mm thick screed bed in cement mortar 1:6 as in pathways, etc. including dismantling of existing unserviceable stone slab/tiling alongwith cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and as directed

Material and labour for Preparation of surfaces of old cement painted surfaces of walls, pilasters, cornices, etc.,and applying one coat ofcement based paint, any colour complete all as specified and as directed.

Material and labour for Machine pressed precast concrete interlocking colour paver block 55 - 60mm thick any shape and size with glossy finish on top confirming to IS 15658-2006 of 55-60mm thickness, with grey cement M-35 grade and including dismantling of existing unserviceable tiles of any description etc and taken as credit complete all as specified and as directed .

Material and labour for 50 mm thick Crushed stone sand (M-sand/ Robo Sand/i-Sand) filling under interlocking paver blocks including spreading ,levelling , watering and consolidation complete all as specified and as directed .

Material and labour for Machine pressed precast concrete interlocking colour paver block 80mm thick any shape and size with glossy finish on top confirming to IS 15658-2006 of 55-60mm thickness, with grey cement M-40 grade and including dismantling of existing unserviceable tiles of any description etc and taken as credit complete all as specified and as directed .

Material and labour for Preparation of old surfaces of steel of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for Preparation of new surfaces of steel of any description over 10cm width or girth and applying two coats of synthetic enamel paint ove a coat of zinc chrome red oxide primer complete all as specified and as directed.

M/s B C CHOUGULE

M/s. KIRAN M CHOUGULE

M/S MAHADEV M PATIL

M G KANADIKAR ENGINEERS AND CONTRACTORS

DHANSHRI ENTERPRISES