Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.4 LAccepted-AOC CIVIL LINE MATATILA ROAD TALBEHAT DISTT LALITPUR U P | TALBEHAT | LALITPUR | U P | L1 | Accepted-AOC Accepted | |
| 2 | L2₹20.8 L+₹4,950 (0.24%)Rejected-AOC NEAR PUMP HOUSE ROAD NEAR RED ROSE SCHOOL BABINA CANTT JHANSI DISTT UP 284401 | JHANSI | UTTAR PRADESH | 284001 | L2 | Rejected-AOC Rejected | |
| 3 | L3₹21.4 L+₹60,002.50 (2.89%)Rejected-AOC | L3 | Rejected-AOC Rejected | |
| 4 | L4₹21.5 L+₹67,020 (3.22%)Rejected-AOC 1442 1 NANADANPURA BABINA CANTT TEHSIL DISTT JHANSI UP | BABINA | JHANSI | UP | L4 | Rejected-AOC Rejected |
Tender Value
₹22.1 L
EMD Value
₹44,182
Closing Date
10 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE JHANSI
HQ CWE JHANSI
SPL REPAIR OF BLDG NO P-50 AND P-51 JCOs LIVING (OTM ACCN) IN ZONE 10 AT TALBEHAT MIL STN
2022_MES_557190_1
CWE/JHA/TBT/TOKEN/34 OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
TALBEHAT
As per tender documents
8 documents required · 8 mandatory
₹500
AGE (I) TALBEHAT
₹44,182
Yes
7 Dec 2022
11 Oct 2022
17 Nov 2022
11 Oct 2022
10 Nov 2022
28 Oct 2022
Amount
Taking down cement or cement lime plaster on brick wall, ceiling incl. Raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for Rendering 10mm thick on in CM 1:6 fair faces of brick work or concrete surfacesfair surfaces of walls finished even and smooth w/o using extra cement complete all as specified and directed.
M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces as in ceiling surfaces finished even and smooth complete all as specified and directed.
M&L for Rendering 5mm thick in cement mortar (1:3) on fair faces of brick work or concrete surfaces as in ceiling surfaces finished even and smooth complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall over a coat of primer on surface and applying two coats of oil bound distemper complete all as specified and directed.
Complete removal of existing treatment of old plastered surfaces of wall over a coat of primer on surface and applying two coats of oil bound distemper complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall over 1mm thick putty a coat of primer on surface and applying two coats of oil bound distemper complete all as specified and directed.
M & L preparation new plastered surfaces of walls and providing two coat of cement base paint over a coat of primer complete all as specified and directed.
Complete removal of existing treatment of old plastered surfaces of walls and providing two coat of cement base paint over a coat of primer complete all as specified and directed.
Material and labour for preparation of newly plastered surfaces and applying three coats of white wash on ceilings complete all as specified and directed.
Complete removal of existing treatment of old plastered surfaces and applying two coats of white wash on ceilings complete all as specified and directed.
Complete removal of existing roof treatment incl preparation of old roof surface for roof treatment complete all as specified and directed. Note: All debris obtained from taking down shall be removed 1.5 km to 2 km complete all as specified and as directed
M&L for rendering 10mm thick in CM 1:4 on concrete surfaces/ roof/ parapet wall using WPC as per manufacturer finished fair & even without using extra cement complete all as spescified and directed.
M&L for water proofing treatment including preparation of surface as required for roof treatment , balcony, terrace etc. consisting of following sequences of operation on RCC roof slab for non accessible roof surface complete all as specified and directed. M&L for providing and laying of fibre reinforcement elastomeric liquid water proofing membrane with resilient acrylic polymer having sun reflective index (SRI) of 105 manufactured by Asian Paints Ltd or equivalent as approved by AGE(I) on top of concrete roof with consumption @ 10.76 Ltr/10Sqm for three coats. One coat of self priming of elastomeric water proofing liquid (dilution with water in the ratio of 3 part of product and one part of water and two coat of undiluted elastomeric water proofing liquid (dry film thickness of complete treatment not less than 500 microns). The operation shall be carried out after scrapping and properly cleaned loosed particles with wire brushes, filled the crack upto 3mm with fibre glass reinforced crack filling compound 10, complete all as specified and as directed. Note: The work of water proofing treatment shall be got executed through manufacturer or authorised applicator of the manufacturer .
Supply only integral water proofing compound complete all as specified and directed.
M&L of water proofing treatment to toilet area of sunken floor complete all as specified and as directed with following course of description below:- (a) Applying first layer of cement slurry @ 0.488Kg/Sqm mixed with acrylic based polymer modified cementation composite compound coating @ 0.253Kg/Sqm of make as approved in technical instruction 5/2003 and be allowed to air cure of 4 Hours. (b) Second layer of cement slurry @ 0.242Kg/Sqm mixed with acrylic based polymer modified cementation composite compound coating @0.126Kg/Sqm and be allowed to air cure of 4 Hours. (c ) Followed with water curing and testing for leak proof by ponding test for 48 Hours
M&L for Cement concrete 1:5:10 type E-2 using 40mm graded stone aggregate in foundations, sub base floor, filling and mass concrete complete all as specified and directed.
M&L for 50mm dia light grade GI pipe as in spout to drain out if any leakage occures in the sunken portion complete all as specified and as directed.
Demolition of cement concrete (unreinforeced) in floors and paving n.exc 15cm thickness (above or below ground level) complete all as specified and directed.
Demolition of stone/ brick masonry built in cement or cement lime mortar as in portion ordered complete all as specified and directed.
M&L for brick work with old size sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.
M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in coping and like other wk including necessary form work complete all as specified and directed.
M&L PCC (1:3:6) type C-2 using 40mm graded stone aggregate 75 mm thick as in plinth protection finished fair even laid in alternate bays n.exc 2m in length all as specified and directed.
M&L PCC (1:4:8) type D-2 using 40mm graded stone aggregate 100 mm thick as sub bases of path all as specified and directed.
M&L Sand filling under floor/path or in foundations including watering and consolidation complete all as specified and directed.
M&L Machine pressed precast concrete interlocking paver block with grey cement pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade of approved quality,laid over complete all as specified and as directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.50 sqm each and removing from site complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm and n.exc 4.00 Sqm each and removing from site complete all as specified and directed.
M & L for rolled mild steel work angle iron as in door frame (Chowkhats) & cooler stand confirming to Fe-290(Gde E 165) including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M S square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.
S & F factory made solid pannel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded. sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawings on page 146 of SSR Part - II 2004 complete all as specified and directed.
S & F 165x60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.
S & F second class HW Hollock/Bonsum/Sal 35mm thick, factory made, plain framed, paneled shutter (Two panels) with panels of 9mm thick BWP grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive conforming to IS-710. The size of rails & style shall be as per IS-1003 (part-I) kiln seasoned as per IS-1141 & chemically pressure treated as per IS-401 complete all as per specified and directed.
S & F for 2nd class HW 35 mm thick, gauged and skeleton shutters (Three Panels), factory made open rebated and prepare to receive glass, gauge etc (with sash bar), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. Size of members of shutter shall be as specified in SSR 2009 Part-I, section 8 clause Member shall be kiln seasoned as per IS-1141 & chemically pressure treated as per IS-401 complete all as specified and directed.
S&F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified directed. (Jindal sec 21516,21517)
M&L powder coated aluminium window shutter sliding type section not less than 0.55 Kg/RM, three shutter two glazed and one gauged including joining cleat,glazing cleap,rubber packing aluminium snap beading,screws,locking arrangement complete all as specified and as directed. (Measurement shall be done leaf basis) Note:- Glass and Wiremesh paid Seprately.
S&F powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified specified and directed. Note:- Glass and Wiremesh paid Seprately.
S&F in position 4.8mm thick frosted glass on one side quality and glazing with glazing clips including necessary rubber packing to aluminium framen n. exc 0.5 sqm in each pane all as specified and as directed.
S&F in position 4.8mm thick frosted glass on one side quality and glazing with glazing clips including necessary rubber packing to aluminium framen exc 0.5 sqm in each pane all as specified and as directed.
S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.
M&L for Framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes; framedguard bars; barred iron doors,ladders; framed balusters; walkways; railings; framework of water tanks and similar workconforming to Fe.290.Gde-E-165 complete all as specified and directed.
S & F 150 mm long floor door stopper of Aluminium alloy body tongue, anodised, with hard drawn steel spring fixed to door complete all as specified and directed.
S&F butt hinges 100mm extruded aluminium alloy with galvanised mild steel hinges pin anodised and fixed complete all as specified and directed.
S&F 150mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and directed.
S&F aluminium, anodised, barrel tower bolt of extruded section, ISI marked, 200 mm long complete all as specified and directed.
S & F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F 250mm long alumn. alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section complete all as specified and directed.
M & L for preparation of new wooden surface over 10cm width or girth and applying two coats of synthetic enamel paint of Ist quality over a coat of pink primer complete all as specified and directed.
M&L for preparation of new steel surface over 10cm width or grith & applying two coats of synthetic enamel paint of 1st quality over a coat of red oxide primer complete all as specified and directed.
M&L for preparation of new steel surface n.exc10cm width or grith & applying two coats of synthetic enamel paint of 1st quality over a coat of red oxide primer complete all as specified and directed.
S&F in repair fancy type 20mm dia stainless steel curtain rods fixed to bracket complete all as specified and directed.
S&F decorative type knobs with bracket of stainless steel fixing at end of pelmet rod complete all as specified and directed.
Dismantling floor, hearth or wall tilling including cement mortar bedding, and rubbish off premises etc complete all as specified and directed.
M & L for Non-skid coloured Ceramic tiles 7 to 8 mm thick ( square /Rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in CM (1:6), complete all as specified and directed.
M/L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick cement screed bed in CM 1:6 complete all as specified and as directed.
M/L for Non - skid Ceramic Coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in skirting but tile laid over 10mm thick CM (1:4) plaster complete all as specified and directed.
M&L for coloured Glazed ceramic tiles 450 x 300 x 7mm thick tiles on walls, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile over and including cement mortar 1:4, 10mm thick plaster complete all as specified and directed.
Dismantling of existing unserviceable water tank of any description capacity exc 250 Ltr but n.exc 500trs capacity each complete all as specified and directed
S& F rotational moulded synthetic (HDPE) water storage tank 500 litre capacity (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part-I complete all as specified and directed.
S&F in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.
S&F in repairs gun metal globe or gate valve, wheel head cast copper alloy screwed down light pressure with crutch or butterfly handle screwed both ends for iron pipe or for union 20 mm dia, ISI marked complete all as specified and directed.
Taking up or down steel tubing and connection 15 mm bore and removing the same from site/keeping aside for reuse complete all as specified and directed.
Taking up or down steel tubing and connection 20 mm bore and removing the same from site/keeping aside for reuse complete all as specified and directed.
S & F water tubing 15 mm bore, medium weight, ISI marked galvanized with all fittings and fixed to walls, ceiling or laid in floors complete all as specified and directed.
All as per Ser item No 64 but 20 mm bore complete all as specified and directed.
S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm including brackets,Waste coupling 32mm of PTMT (half or full threaded) (Minimum weight 32mm 45gms),waste pipe complete all as specified and directed
S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
S&F in repair PVC valveless syphonic action type low level flushing cistern, 10 Ltrs capacity White, with inlet ball valve, float, handle with 32mm PVC flush pipe, fixed on walls by driling holes and using PVC rawl plug of suitable size complete all as specified and directed.
S&F in repair PVC connection, heavy duty 15 mm bore, 45 cm long with two Nos PTMT nuts at both ends of approved quality complete all as specified and directed
S&F in repairs PVC waste pipe 32mm bore 600mm long with one end socketed complete all as specified and directed.
S&F in repairs grating round 125mm size of chromium plated with centre hole movable or side hole for fix to waste pipe complete all as specified and directed.
S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws embedded in the wall complete all as specified and directed.
S&F in repair tubular towel rail brass chromium plated 20mm dia 'D' type 60cm long between flanges complete all as specified and directed.
S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed.
S&F half turn / quarter turn, 15mm dia CP central hole basin mixer without pop up waste system with and including 2 Nos. 450 mm long flexible heavy duty PVC connection suitablr for mixing of hot and cold water screwed for iron pipe and fixed complete all as specified and directed.
S&F half turn /quarter turn chromium plated 15 mm bore wall mixture 3 in 1 with provision for over head shower with 115 mm LB pipe & wall flange complete with bend pipe and wall flange, complete all as specified and directed.
S&F in repairs Fancy type chromium plated Angle/stop valve 15 mm dia screwed down light pressure screwed both ends for iron pipe or for union complete all as specified and directed.
S&F in repairs Chromium plated bib taps, with capstan heads, screwed down for iron pipe or for brass ferrule & fixed for 15 mm bore pipe complete all as specified & directed.
S&F in repair brass chromium plated shower rose of 125mm size with swivel joints, incl Fixing to steel pipe or union of 15mm bore complete all as specified and directed.
Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., and removal complete all as specified and directed
S&F for 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S&F for 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.
S&F Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof fixed to pipe of bore 110mm complete all as specified and directed.
S&F 110mm PVC (SWR) bends any radius complete all as specified and directed.
S&F 110mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.
PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. Note: All debris obtained from demolition shall be removed 1.5km to 2km complete all as specified and as directed.
Providing precast cement concrete type B1 1:2:4 20 mm graded aggregate as in cover slabs for septic tank/ manholes/drains set in cement Mortar 1:4 complete all as specified and as directed.
M&L TMT bars 10 mm dia and over cut to length bend to shape required incl. cranking hooking ends and binding with and incl. MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed
S&F of Solid FRP man hole cover of size 76cmx76cm with Safety lock fitted to manhole any type complete all as specified and as directed. Make : Fluton polymers/Sigma or as equivalent brand all as specified and directed.
M&L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft/loose soil etc. complete all as specified and directed.
M&L for PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in foundations, fillings, mass concreting complete all as specified and directed.
Demolition and breaking up 150 mm dia (Salt glazed ware ,AC / CI or reinforced concrete) set in cement mortor drain pipe, jointed set in cement mortor.incl pcc if any and taking out of trenches,floor & walls if required complete all as specified and directed.
M&L for 150 mm bore SGSW drain pipe (Grade-A) laid in trenches and jointed in CM 1:1 and tested complete all as specified and directed.
M&L for concrete bed for 150 mm bore pipe in laid with PCC 1:4:8 type D-2 to drain pipes including packing under, haunching against the sides of pipes after they are laid and tested complete all as specified and directed.
Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar exc half brick but not exc one brick complete all as specified and directed.
Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
Taking down copper/aluminum point wiring (light, fan, socket or power) complete including fitting and fixture such as swithces, ceiling roses, regulator socket light fittings etc and making good distrubed for wall floor etc complete all as specified and directed.
Point wiring with 1.5 Sqm, single core, PVC inculated with multistranded PVC unsheathed copper conductor cable in and inlcluding rigid non metallic PVC concealed conduit 20 mm dia or higher, med grade , ISI marked complete with all PVC conduit accessories/fittings and sunk CI/pressed steel terminal switch boxes with 3 mm thick, top cover, concealed in wall including earth wire of PVC insulated unsheathed 1.5 Sqmm copper conductor connected to all fittings, sunken boxes and common earth and connected to earth dolly scrwed with brass screws, compelte all as specified and directed for One light/fan/exhaust fan point controlled by one, one way switch, 5/6 Amps. Note : switches, sockets etc will be measured & paid seperately under relevant items.
All as per item No. 103 above but for One 3 pin 5/6 Amps socket out-let point board, controlled by one, one way 5/6 Amps switch. Note : switches, sockets etc will be measured & paid seperately under relevant items.
Supplying & fixing for switch piano type, 1 way, 6 Amps, single pole, 230 volts AC circuit complete all as specified & directed.
Supplying & fixing for socket outlet, 3 pin, 5 Amps, flush type, 230 volts AC circuit complete all as specified & directed.
Supply and fixing fan regulator step type, suitable for ceiling fans, prewired 230 volts AC 50Hz supply 100Watt complete all as specified & directed.
Supplying & fixing for ceiling rose surface bakelite 65 x 20 mm, three terminals, complete all as specified & directed.
Supply and fixing Lamp holder PVC / polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.
Supply & fix LED tube light along with fixture, 20 W including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.
Supply and fixing LED lamp 9/10 watts complete all as specified and directed.
Disconnecting and taking down ceiling fan and exhaust fan from any location and refixing after complete greasing oiling and painting complete all as specified and directed.
Sub main wiring with 2 run single core, 6 Sqmm, PVC insulated and usheathed stranded copper conductor cable in and incluidng PVC cncealed/surface conduit, 25 mm or higher dia, complete with all PVC conduit ISI marked complete with all accessories/fittings including extension of earth wire with one run 6 Sqmm PVC insulated copper cable, single core, fixed alongwith the sub main cable in PVC conduit with clips and connecting to earth dolly with all fixing material complete all as specified and directed.
Supply and fixing epoxy powder coated distribution board TP & N 4 ways suitable for one FP-MCB as incomer and 12 SP MCBs (or any combination of SP/TP MCBs ) outgoings complete all as specified & directed.
S&F Single pole and neutral DB's with 200 Amp rated copper bus bar made of sheet steel enclosure (housing), double door recessed type factory made duly painted 8 way suitable for mounting one incommer, 2 pole, 240 volts isolator/RCCB/MCB and outgoing SPN/SP respectiviely including colour coated bus bar, Neutral link, Earth bar and Din Rail, mounting bracket, fixing clamps, etc complete all as specified and directed.
S&F MCB, Tripple pole & neutral 63 Amps, 230 volts, 50 HZ, 'C' curve complete all as specified and directed.
S&F MCB, single pole & neutral 32 Amps, 230 volts, 50 HZ, 'C' curve complete all as specified and directed.
S&F MCB, single pole 6 /10/16/20/25/32 Amps, 230 volts, 50 HZ, 'C' curve complete all as specified and directed.
Supply and fix MCB protected plug and socket board in sheet steel enclosure with 20A rated mini MCB and 25A rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed.
M/S Ritu Tandon
DEVENDRA ENTERPRISES
M/S SHIVA TRADERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .