Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹9.2 L+₹15,830 (1.76%)Rejected-Finance | L2 | Rejected-Finance Not being L1 | |
| 3 | L3₹13.6 L+₹4.6 L (51.1%)Rejected-Finance | L3 | Rejected-Finance Not being L1 | |
| 4 | L4₹17.8 L+₹8.8 L (97.6%)Rejected-Finance | L4 | Rejected-Finance Not being L1 | |
| 5 | L5₹20.1 L+₹11.1 L (123.8%)Rejected-Finance D 91 BLOCK D AMITY GREEN HASEMAU LUCKNOW PIN 226028 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226028 | L5 | Rejected-Finance Not being L1 |
Tender Value
₹23 L
EMD Value
₹46,000
Closing Date
8 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (MES) Faizabad
Garrison Engineer Military Engineer Services Faizabad PIN-224001
PERIODICAL SERVICES TO DRC AND UNIT AREA ETC IN THE AREA OF AGE BR I UNDER GE FAIZABAD
2022_MES_545087_1
8323/E8
Open Tender
Civil Works
Item Rate
180 days
Faizabad
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (MES) Faizabad
₹46,000
Yes
7 Nov 2022
12 Aug 2022
10 Sept 2022
12 Aug 2022
8 Sept 2022
26 Aug 2022
Amount
M&L for complete removal of existing decorative treatment of any description on walls, roof projectios, facias, cornices etc by scraping with mechanical sander having mechnical vaccum mechanism with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour and applying a layer of wall care putty min 2mm thick complete all as specified and directed by Engineer-in-Charge. Note:- GE’s approval shall be obtained by the Contractor in token satisfaction before applying decorative finishes.
M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistanceas per IS-15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon adhesives @ 1.43 Ltr/10 Sqm over and including priming coat of exterior primer applied @ 0.90 Ltr/10 Sqm, primer and emulsion paint to be applied through airless spray machine (Mechanical means) complete all as specified and directed by Engineer-in-Charge. Note: (i) Preparation of surfaces included in Srl item No. 1.00 above (ii) Tint / Shade shall be decided and approved by GE
M&L for applying two coats of oil bound distemper on prepared surfaces of walls of any description over 10 cm width or girth, not otherwise described, oil bound distemper to be applied by authorised applicator of the manufacturer through airless spray machine (Mechanical means) complete all as specified and directed by Engineer-in-Charge. Note: (i) Preparation of surfaces included in Srl item No. 1.00 above (ii) Tint / shade shall be decided and approved by GE
M&L for applying two coats of plastic emulsion paint including primer on prepared surfaces of walls of any description over 10 cm width or girth, not otherwise described, primer and plastic emulsion paint to be applied by authorised applicator of the manufacturer through airless spray machine (Mechanical means) complete all as specified and directed by Engineer-in-Charge. Note: (i) Preparation of surfaces included in Srl item No. 1.00 above (ii) Tint / shade shall be decided and approved by GE
M&L for preparation of old decorated surfaces of walls including cornices, pillars etc and applying one coat of acrylic exterior grade oil base emulsion paint (anti-fungal) complete all as specified and directed by Engineer-in-Charge. Note: Tint / shade shall be decided and approved by GE
M&L for preparion of old decorated surfaces of walls, cornices, pillars etc and applying two coats of distemper oil emulsion complete all as specified and directed by Engiineer-in-Charge. Note: Tint / shade shall be decided and approved by GE
M&L for preparation of old decorated surfaces of walls including cornices, plaster and other wall features by brooming down with steel wire brushes, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil / greasy spots, removing all loose scale and other foreign matters and applying one coat of oil bound distemper complete all as specified and directed. Note: Tint / shade shall be decided and approved by GE
M&L for preparation of old decorated surfaces of walls including cornices, plaster and other wall features by brooming down with steel wire brushes, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil / greasy spots, removing all loose scale and other foreign matters and applying one coat of white wash complete all as specified and directed.
All as per Srl item No. 9.00 but applying two coats of white wash on walls
All as per Srl item No. 9.00 but applying one coat of white wash on ceilings / soffits
M&L for preparation of old decorated surfaces of walls including cornices, plaster and other wall features by brooming down with steel wire brushes, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil greasy spots, removing all loose scale and other foreign matters and applying one coat of cement based paint complete all as specified and directed by Engineer-in-Charge. Note: Tint / shade shall be decided and approved by GE
M&L for complete removal of existing decorative treatment of any description on old surfaces of walls by scraping, washing down etc including removal of nails & making good the holes, cracks etc and applying two coats of cement based paint over a coat of cement primer complete all as specified and directed by Engineer-in-Charge.
Taking down cement or cement lime plaster on brick work or concrete surfaces of any description including raking out joints, hacking for key and scrubbing down with water and M&L for 15mm thick plastering in cement mortar (1:6), finished even and fair complete all as specified and directed by Engineer-in-Charge.
Taking down cement or cement lime plaster on brick work or concrete surfaces of any description including raking out joints, hacking for key and scrubbing down with water and M&L for 10mm thick plastering in cement mortar (1:4), finished even and fair complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant cement primer complete all as specified and directed by Engineer-in-Charge. Note: Tint / shade shall be decided and approved by GE
M&L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over 1mm thick wall care putty complete all as specified directed by Engineer-in-Charge.
M& for preparation of old painted wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of old painted iron or steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of old plastered / concrete / Brick / stone / asbestos cement surfaces of walls of any description and applying one coat of plastic emulsion paint complete all as specified and directed.
M&L for extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds, facia, Chajja edges, parapet borders etc and similar works exc 15 cm but n.exc 30cm in width or girth including cutting edges, all mitres and stop ends etc complete all as specified and directed by Engineer-in-Charge. Note:- GE’s approval shall be obtained by the Contractor in token satisfaction before applying decorative finishes.
M&L for preparing old wooden surfaces of any description width or girth including one coat of wood filler, cleaning and applying one or more coat of french polish to give glossy finish complete all as specified and directed by Engineer-in-Charge.
M&L for writing letters, figures (Block, Roman, Italic or Indian) n.exc. 30 cm high using synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
awashyakta enterprises
M/S AVADH ENTERPRISES
AIRDOT ENGINEERING
Matrubhoomi Construction
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .