864/WS-57/2021-22

Amount

B/R Works M&L for 2nd class soft wood wall panelling of 10 mm thick interlocking type of width 120 mm and length fixed in walls with screws including necessary frame work of cross sectional area 50 x 50 sqmm and 600 mm c/c horizontally and vertically complete all as specified and directed.

M&L for Khatamband Ceiling of pattern as approved by GE including and over 6 mm thick Plywood BWR Grade & frame work of cross sectional area 75 x 50 sqmm and 600 mm c/c both sides complete all as specified and directed.

M&L for french polishing on wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/ dense soil complete all as specified and directed.

M&L for cement concrete (1:4:8) type D2 (using 40 mm greded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for RCC (1:1.5:3) type A1 (Nominal mix) (using 20 mm graded crushed stone aggregate) as in foundations, including rafts footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC (1:1.5:3) type A1 (Nominal mix) (using 20 mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for RCC (1:1.5:3) type A1 (Nominal mix) (using 20 mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter of rough finished flat surfaces of concrete complete all as specified and directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished surfaces of concrete square, rectangular or polygonal complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Ditto all as per serial item No. 11.00 described here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick in soils complete all as specified and directed.

Removing excavated material (Soil) n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L for hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M&L for cement concrete (1:4:8) type D2, (using 40mm graded crushed stone aggregate) 100 mm thick as in sub base complet all as specified and directed.

M&L for cement concrete (1:2:4) type B2, (using 40mm graded crushed stone aggregate) 75 mm thick as in flooring complete all as specified and directed

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exc 6 m mean radius built in cm (1:6) complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cm (1:4) finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces finished fair and even without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces by using necessary filling compound of Altek/Birla white putty to obtain smooth/even finish using sand paper and applying two coats of distemper oil emusion over a coat of alkali resistant priming paint complete all as specified and directed.

M&L for preparation of new plastered surfaces by using necessary filling compound and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed.

M&L for rolled mild steel roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel , base plate or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Gde-E- 250) quality-A complete all as specified and directed.

S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screw and washers, in roofs, walls etc with grade of zinc coating 275 complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth, not otherwise described and appling two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in plinth protection finished fair and even without using extra cement n exc 2m in length complete all as specified and directed.

S&F MS work as in hand rails, half round or other steel section or core for wooden hand rail straight portion, drilled and countersunk or balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F second class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

Surface excavation n.exc. 30 cm deep and averaging 15 deep and getting out in soft/loose soil complet all as specified and directed

M&L for chequered concrete tiles 200 x 200 x 25mm thick jointed and pointed in neat cement slurry with white cement and pigment as in treads incl 20 mm thick screed in CM (1:6) complet all as specified and directed

Demolation of brick work or PCC solid block or stone /boulder masonry built in cement morter complete all as specified and directed.

Demolition of cement concrete (un reainforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) as in plinth protection /path/hard standing /floor etc. removal of debris out side MD land complete all as specified and directed.

Excavation over areas, n exc 1.5 m deep and getting out in soft/loose soil complete all as specified and directed.

Ditto all as per serial item No. 33.00 described here-in-before but exc 1.5 m deep but n exc 3.0 m deep

M&L for RCC (Design Mix) M-30 (using 20mm graded crushed stone aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under- reamed piles and mass concrete complete all as specified and directed.

M&L for RCC (Design Mix) M-30 (using 20mm graded crushed stone aggregates) as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.

Use and waste of formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters buttresses etc vertical or batter for flat/curved rough finished surfaces of concrete complete all as specified and directed.

M&L for 5mm thick rendering in CM (1:3) on brick/ concrete wall surfaces trowelled to even & smooth mixed with water proofing compound complete all as specified and directed. Note : WPC shall be measured and paid separately

Supply only integral water proofing compound complete all as specified and directed.

Ditto all as per serial item No. 11.00 described here-in-before but 6 mm to 8 mm dia TMT bars

S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F mild steel 1.60 mm thick, plain black sheet in wall cladding, steel gates and similar work cut to size holes punched including round headed screws clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams including bending or turning up mitred angles etc as required complete all as specified and directed.

Note : Semi Under Gruond work shall got be executed as per Drawing No. CESZ/ TD/ /2022 dated Feb 2022 sheet 1/1

E/M Works Taking down carefully copper/aluminium point wiring (light, fan, socket or power) including fixtures/fittings such as switches, bell push, call bell, ceiling roses, lamp holders, regulators, sockets light fittings etc and making good disturbed surfaces & matching with the existing colour surfaces complete all as specified and directed.

M&L for point wiring with single core PVC insulated 1100V grade cable with multistranded copper conductor of size 1.5 Sqmm (Nominal area) drawn in and PVC conduit/ casing capping (medium grade) of suitable size with all fittings and accessories including sunken box/ PVC rectangular board of suitable size for modular switches/ sockets and drawing continuous earth wire of PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 1.5 sqmm complete all as specified and directed for following:-

One light/ fan point controlled by one, one way switch

One 3 pin socket outlet 5/6 Amps on independed board controlled by one, one way switch

One 3 pin socket outlet 5/6 Amps on same board controlled by one, one way switch

M&L for point wiring with single core PVC insulated 1100V grade cable with multistranded copper conductor of size 2.5 Sqmm (Nominal area) drawn in and including non metallic rigid PVC concealed conduit, medium grade ISI marked not less than 20 mm dia, concealed in wall, ceiling with saddles, screw & Plugs with all fittings including tee, junction boxes and drawing continuous earth wire of PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 2.5 sqmm and terminated in and including sunken box for modular switches/sockets, regulators etc complete all as specified and directed.

S&F modular switch one way 6 Amps, one module (ISI marked) complete all as specified and directed.

S&F modular socket 6 Amps 2/3 pin combined 2 module (ISI marked) complete all as specified and directed.

S&F modular switch 15 Amps one way, one module (ISI marked) complete all as specified and directed.

S&F modular socket 6/16 Amps 2/3 pin combined 2 module (ISI marked) complete all as specified and directed.

S&F white cover plate with frame of two module (ISI marked) complete all as specified and directed.

S&F white cover plate with frame of three module (ISI marked) complete all as specified and directed

S&F white cover plate with frame of six module (ISI marked) complete all as specified and directed.

S&F white cover plate with frame of eight module (ISI marked) complete all as specified and directed.

S&F ceiling rose 3 phase/ PVC/ Polycarbonate, isolated body (ISI marked) complete all as specified and directed.

S&F LED light fitting fixture 20W, 6500K, 2000 lm decorative ultra slim with co extruded channel in thermally conductive material with plastic housing, heat sink, environmental friendly having power factor >0.95, surge protection 2.5KV energy efficient ready to use complete all as specified and directed. Make- Havells Cat Part No: LHEXBYPNIN1W020 or equivalent in Wipro/CG

M&L for sub main wiring with two single core 10 sqmm FRLS, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLS, ISI marked, PVC multistranded copper conductor cable of size 6 sqmm green colour as earth lead including PVC conduit/ casing capping of suitable size complete all as specified and directed, including taking down unservicable one. Note: Two run of 10 sqmm cable, one run of earth wire of 6 sqmm and one run of PVC conduit/casing capping shall be measured as one unit).

S&F pre wired MCB Distribution board, 240 volts single pole and neutral, double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 8 ways, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed including taking down. Make: Havells/GE/C&S

Taking down exhaust fan, cealing cable end and refixing and connecting up including provision of cable from ceiling rose to fan complete all as specified and directed.

S&F LED round shape 12 watt 220 volts AC recessed type with high efficiency diffuser soft glare free light complete with drivers, holders, LED lamps suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make : Havells Cat Part No : LHEBHDP71Z1W012 or equivalent in Wipro/ CG

M&L for point wiring complete with PVC insulated and unsheathed, Flame retardant low smoke (FRLS) 1100 volt grade electric cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core in and including rigid PVC surface/concealed conduit not less than 20 mm dia, clip, with suitable MS terminal boxes (not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint including earth dolly with 3 mm thick plastic laminated sheet top cover of approved colours including 1.50 sqmm green solid copper conductor as continuous earth wire with all accessories including lugs required, complete all as specified and directed for the following :-

One light/ fan point controlled by one, one way switch

One 3/5 pin 5 Amp socket outlet point controlled by one, one way switch on independent board

Ditto all as per serial item No 60.00 described here-in-before but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant Low Smoke (FRLS) cable for security light/ 3/6 pin 15 Amp socket outlet controlled by one, one way switch on independent board with and including 2.5 sqmm green solid copper conductor as continuous earth wire with lugs

S&F switch piano flush button type 5 Amp single pole one way (ISI marked) complete all as specified and directed.

S&F switch and socket combination 3 pin 5 Amp AC 230 Volts piano flush type, (ISI marked) complete all as specified and directed.

S&F switch and socket combination 6 pin 15 Amp AC 230 Volts piano flush button type (multipurpose) (ISI marked) complete all as specified and directed.

S&F fan stepped type electronic fan regulator rotary 0-4/5 steps step type, 240 Volt 50 Hz complete all as specified and directed. Make : Anchor/ SSK/ Leader

S&F LED light fitting 1x20 W, 230 V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F 240 V, 10 kA 'B' curve MCB of single pole and current carrying capacity 40 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed

S&F 240 V, 10 KA 'B' curve MCB of single pole and current carrying capacity 6 to 32 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed

M&L for submain wiring of two single core 2.5 sqmm size stranded copper conductor PVC insulated unsheathed cable (FRLS) in and including PVC rigid non metalic conduit and one PVC cable 2.5 sqmm size solid copper conductor PVC insulated and unsheathed for continuous earth wire with junction boxes covered with laminated sheet 3 mm thick and other accessories complete all as specified and directed .

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep min air delivery 210 CFM with service value 6.00 BEE Five star rated with brushless direct current motor (BLDC). Note : Old unserviceable fans shall be deposited in MES E/M store

S&F Fan hook MS Flat iron suitable for hanging ceiling fan complete all as specified and directed.

Supply & lay cable XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor, 1100 Volts graded of cross section area 6 Sqmm x 2 core complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel, protected by GI pipe 15 mm bore (light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of PCC (1:4:8) type D2 (using 40 mm graded crushed stone aggregate) and coping shall be in PCC (1:3:6) type C1 (using 20 mm graded crushed stone aggregate) 50 mm thick cover of RCC (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) reinforced with 8 mm dia MS TMT bar @ 80 mm c/c both ways including excavation and earth work and removal of surplus soil complete all as shown in electrical plate No 3 of SSR Pt 1 (2009) with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switched, DBs) complete all as specified and directed.

Supply, install, testing and commissioning of electric driven 15HP centrifugal pumpset suitable for minimum discharge 1170 LPM at 68 mtr minimum head, with suitable 3 phase, 415 volts, 50Hz, AC induction motor of 2920 RPM incl safety device and low/ high voltage cutoff relay, including foundation as per manufacturer’s design and electric connection with suitable size PVC insulated copper conductor cable drawing through and including flexible conduct from main control panel to starter and starter to motor including thimble of suitable size, and all necessary connection for suction and delivery pipes and all holding arrangement complete all as specified and directed. Note:- Kirloskar/ Crompton/ Siemens.

Supply and laying GI water tubing 100mm bore with screwed socket joints, medium grade galvanised incl all fittings, such as sockets, bends, elbows, unions, tees and flanged joints laid in trenches complete all as specified and directed. Note:- Jindal Pipes/ Prakash Surya/ TATA /BST

S&F cast iron sluice valve, short body type, flanged ends heavy duty as per IS 5312, PN 1.6 of size 100 mm dia including 6mm thick rubber insertion ring complete all as specified and directed. Note:- Zoloto/ Sant / Kirloskar / Leader /TATA

S&F cast iron non return valve, short body type, flanged ends heavy duty as per IS 5312, PN 1.6 of size 100 mm dia including 6mm thick rubber insertion ring complete all as specified and directed. Note:- Zoloto/ Sant / Kirloskar / Leader /TATA

S&F control units for motor including all fixing accessories complete all as specified and directed. The cost of following accessories shall deemed to be included in the quated rate:- Note : Each control units consist of :- (i) MCCB 4 pole, 160 Amps, 25 kA-01 No, (ii) MCCB 4 Pole, 100 Amps, 36 kA-01, (iii) Single phase preventor -01 No, (iv) RYB indication light -01 set (v) Anmeter 0-100A -01 No, (vi) Voltmeter 0-500V – 01 No Note:- L&T/ Siemens/ GE/ C&S Electric

S&F 50 Sqmm, single core HRFR PVC insulated industrial grade copper conductor (unseathed) flexible cable, 1100 volts conforming to IS:694 complete all as specified and directed.

S&F single phase preventer complete all as specified and directed. Make : Minilec/ Siemens/ L&T

S&F Manually operated oil immersed star delta motor starter, 20 HP, three phase with double contact strip wound overload coil and cable entry box complete all as specified. Make : SKN/ BCH/ MDS.

ZAHOOR ENGINEERING WORKS

M/S SUHEEL CONSTRUCTIONS