SPECIAL REPAIR TO CHURCH ROAD FROM MALL ROAD TO NCC OTA COMPOUND WALL AND DAIRY ROAD UNDER GE KAMPTEE

Amount

Material and Labour for premix bituminous macadam laid/rolled with 8 to 10 tonne power roller and compacted to required gradient and camber (consolidated thickness 75mm or less) with binder content (paving bitumen) of 4% by weight of total mix all and 1.5% cement filler complete all as specified and directed. Note:- The work shall be executed by using hot mix plant & mechanical paver. The rate quoted shall be deemed included for cement filler.

Material and Labour for premix bituminous macadam laid/rolled with 8 to 10 tonne power roller and compacted to required gradient and camber (consolidated thickness 75mm or more) with binder content (paving bitumen) of 4% by weight of total mix all and 1.5% cement filler complete all as specified and directed. Note:- The work shall be executed by using hot mix plant & mechanical paver. The rate quoted shall be deemed included for cement filler.

Material and Labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 Sqm for receiving Bituminous Macadam using paving bitumen grade VG-10 complete all as specified and directed.

Material and labour for premix asphaltic semi dense concrete 30mm consolidated thickness with 5.5% binder content (using paving bitumen of grade VG-30) by weight of total mix, using hot mix process and laid by mechanical paver, rolled and compacted to required camber and gradient using power roller 8 to 12 tonne capacity complete all as specified and directed.

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.

Material and labour for approved moorum/ red bajri in road berms, spread in road berms 150mm (compacted thickness), rolled and consolidated to gradient and camber required with power roller of capacity not less than 0.5 tonne complete all as specified and directed.

Demoltion of cement concrete of any description and in any position and removal of demolished material outside of defense land not otherwise specifically provided for complete all as specified and directed.

Material and labour for hardcore of guage not exc 63mm of broken stone boulders not exc 100mm deposited, spread and levelled in layers watered and rammed to a true surface for hard standing complete all as specified and directed.

Material and labour for 75mm thick cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base to floors finished even complete all as specified and directed.

Material and labour for sand filling under flooring/pavement spread and levelled in layers not exc 15cm thick including watering and consolidation complete all as specified and directed.

Material and labour for machine pressed precast concrete interlocking paver block, coloured, glossy finished, rubber pressed, any shape and size conforming to IS 15658-2006 of 80mm thickness M-40 grade with grey cement and pigment to match the shade of tiles complete all as specified and directed.

Material and labour for PCC 1:2:4 type B-0 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in item No 4028, water troughs and the likes including weathering, slightly rounded for chamfered angles and throating complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

Demoltion of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc and disposal of unserviceable materials, debris and rubbish to a distance not exc 50m complete all as specified and directed.

Excavation in trenches not exc 1.5m in depth and 1.5m in width and getting out in any type of soil complete all as specified and directed.

Material and labour for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, mass concrete and fillings complete all as specified and directed.

Material and labour for brick work with fly ash bricks, old size, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.

Material and labour for rendering 15mm thick in cement plaster 1:4 on fair surfaces of brick work or concrete surfaces, to be finished even and fair without using extra cement complete all as specified and directed.

Supply and fix framed work such as grills, gratings etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters, walk ways, railings, framework of water tanks & similar work conforming to Fe 290-O Gde E-165 complete all as specified and directed.

Material and labour for preparation of new steel surfaces exc 10cm and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and labour for preparation of new plastered surfaces and applying two coats of cement based paint over a coat of cement primer complete all as specified and directed.

Removing excavated material (soil) not exc 50m and deposited where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

Material and Labour for preparation of road surface and applying thermoplastic reflective paint in marking minimum 2.5mm thick single coat as in centre line and edge line road marking of 100 mm width using HOT MARK thermoplastic modern propelles road marking machine as directed including all ingredients such as blinder, glass beads Titanium dioxide calcium carbonate inter filler thermoplastic requirement for glass beads shall be the table No.800.40 of MORTH specification including spraying of glass beads etc. complete all as per manufacture instruction complete all as specified and directed.

Supply and fix solar road stud of size 125mm x 125mm x 20mm aluminium alloy & polycarbonate stud (red/yellow LEDs) 3+3 LEDs with shank in tough aluminium diecast body with MS zinc coated nails of size 12mm dia and 120mm long as per MORTH's specifications complete all as specified and directed.

Supply and fix in repair aluminium road stud two way reflective dimension 110x128x30mm aluminium alloy body reflective panel amber/red, weight 530 gms aluminium coated, filled with epoxy complete all as specified and directed. Make:- Dark Eye cat no DA-971 or technocommercially equivalent.

Supply and fix in repair delineators ABB round body fitted with 2 nos 50mm or 65mm dia highly reflector made out of PMM and mounted on MS pipe of 654mm duly powder coated anti rust and anti theft steel net and providing cement concrete 1:2:4 as in foundation including necessary earth work complete all as specified and directed.

Supply and fix in repair retro reflective boards of shape of rectangular 1.0mx1.4m made out of 2mm thick stainless steel both side bounded/pasted with high prismatic (IV) sheet as manufactured with desired letters/logos / designed as directed. The board shall be supplied with and including stainless steel frame made out of 25mm dia pipe in frame around duly welded and embeded in PCC 1:2:4 type B2 of size 0.45x0.45x0.60 mtr including necessary earth work with and including stainless steel sheet and SS post of 38mm dia including full length of 2.2 mtr one side and 2.8mtr on other side complete all as specified and directed. Note:- The quoted rate included PCC bed block & necessary earthwork in any type of soil and disposal of excavated soil.

Supply and fix in repair 1000mm dia convex mirror made of PC material provided of size 50mm dia, MS pipe 2mm thick, two post duly powder coated for turning, intersections, curves, T junction, parking lots etc and also held ideal for surveilance. It should be clear definite mirror image having 130 degree of viewing angle and unbreakable and stronger than glass complete all as specified and directed. Note:- The following items deemed to be included in the quoted rate: (i) PCC 1:2:4 type B-2 as in bed block of size 50x30x30cm incl necessary earthwork in any type of soil. (ii) Application of two coats of aluminium paint over a coat of primer to MS pipe /frame clamps etc. Make:- Dark Eye / 3M / GREEN

NOTE : SCHEDULE OF CREDIT (Amount on page No 36 shall be deducted offline from the total quoted amount to arrive at the net contract sum to be considered for acceptance.)

M/s T.S.JOHAR (BID ID -3269993)

vidhamal&sons (BID ID -3264629)

M/s SHREE SAIBABA CONSTRUCTION (BID ID -3265041)

Bidder Name

Raut Construction

vidhamal&sons

M/s T.S.JOHAR

M/s SHREE SAIBABA CONSTRUCTION