Providing Parking Shelter Near Shipping Store at LCA Tejas Division Plant-I, HAL BC.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.

Returning / filling in with useful excavated soil (excluding rock), free from salts, organic or other deleterious matter (Other than black cotton soil & rock etc., in trenches, plinth,sides of foundations etc., spreading in layers not exceeding 20 cm thick, watering, breaking / removing clods exceeding 50 mm, ramming and consolidation of each deposited layer etc., with all labour, tools & tackles, plant & machinery, etc., lead upto 50 m and for all lifts, all complete as directed by the Engineer-in-Charge.

Supplying, mixing and placing plain cement concrete (1:4:8) (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate) of required thickness using 40 mm down graded hard stone/granite aggregate in accordance with IS 456 in foundations, mass concrete, sub bases and other similar works including formwork, mechanical mixing, transporting, vibrating, consolidation, levelling, curing, dewatering if any, all materials, labour, lead & lift, tools, plant & machinery, keeping concrete well wetted during the curing period and protecting it in extreme weather conditions etc., but excluding the cost of centering, shuttering and finishing, all complete as directed by the Engineer-in-Charge.

Formwork for the footing,foundation, pedastral, RCC members which are providing timber, wooden planks, runners / M.S. sheets with all supports, struts, braces, wedges, scaffolds, bracings, ladders, gangways, dressing with oil including M.S. bolts nuts and washers, temporary openings, filleting for a stop, chamfered edges, internal / external splayed, rounded angles or grooves for forming throating including making temporary openings in the forms for pouring concrete etc., all complete as directed by the Engineer-in-Charge Note : Formwork material is contractor's own property and shall be removed after completion of work.

Supplying, straightening, fabricating (cutting & bending), placing in position and binding steel reinforcement of TMT bars of not less than Fe 500 D conforming to IS 1786 for all concrete reinforcment members / works above/below plinth level, including cutting to length, bending to shape required, including cranking, bending spirally for hooping for column, hooking ends and binding with mild steel wire (Annealed) not less than 0.9 mm dia or securing with clips, including fixing and bracing, wastage, welding, supporting or otherwise holding firmly in position so that the placing and ramming of concrete will not displace it etc., complete all as per specifications, drawings and as directed by the Engineer-in-Charge. Note : a) Only authorized laps, chairs etc. shall be considered for measurement. b) The exposed Reinforcement bars shall be coated with cement slurry.

Providing and laying in position ready mixed or site batched M25 Grade with minimum cement content of 330 kg/m3 design mix cement concrete for reinforced cement concrete work; using coarseaggregate and fine aggregate derived from natural sources, PortlandPozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, consolidation, levelling, curing, scaffolding, all materials, labour, carriage for all leads & lifts; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge. Note: (i) Site design mix to be obtained from Govt. / NABL laboratory for site batching concrete. (ii) Small quantity is as approved by EIC in volumetric proportion.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) as directed by Engineer-in-Charge.

Supplying, fabricating and fixing in Position MS Structural steel work riveted, bolted or welded in built up sections trusses and framed work, including cutting, Welding, hoisting, Wastage, fixing in position and applying a priming coat of approved steel primer all complete

Providing and fixing on wall face 110mm diameter unplasticised Rigid PVCSingle Socketed rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, as directed in charge

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel guttert sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :

Providing, applying and laying cement mortar (1:4) plastering 15 mm thick on brick/solid blocks/concrete surfaces, finished even and smooth with trowel for Internal/External walls etc., with necesary materials, labour, scaffolding, curing, tools and tackles etc.,at all heights, all complete as directed by the Engineer-in-Charge.

Painting newly plastered external surfaces with two coats of low VOC premium weather proof exterior acrylic emulsion paint of approved acrylic primer including preparing the surface by removing loose dirt and any organic growth, filling of cracks, necessary scaffolding etc., all complete as directed by the Engineer-in-Charge. Note: The paint shall have anti-algal, anti-fungal, UV resistant & anti-tarnishing qualities with 100% acrylic base and silicon or elastomeric additives.

Painting on old wooden/ masonary/ steel surface of any description with coats of synthetic enamel paint, of approved colour and manufacture over a coat of approved primer including preparation of surface by rubbing with fine grade of abrawive paper to ensure smooth and even surface, applying knifing paste filler putty before painting the first coat etc, all complete as directed by the engineer in charge.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Supplying, Laying and compacting of granular sub-base with material Conforming to Grade -I ( size rage 75mm 70 0.075mm) in flooring, subbases,ramps, etc upto plinth level of requisite grading by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & Lifts, Spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achioeve the desired density, complete as per specifications and directions of Engineer-in-Charge.

Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead/ handling it over to civil maintainance as per direction of Engineer-in-Charge.

Supplying and fixing anchor Fastner M-10 all complete as directed by Engineer-in-charge . (CPWD DSR 2023 2612 Basic Rate 12.00 Add GST 18% 2.16 Add Contractor Profit 10% 1.416 Total per Number is 15.56 ).

Total (Exclusive of GST)

Percentage above or below for total value on Sl.No. 19

Total amount after Percentage Sl.No. 19 + Sl.No. 20

GST @ 18% for total value on Sl.No. 21

Total amount (Inclusive of GST) Sl.No. 21 + Sl.No. 22

Preamble: 1. The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The Tenderer shall abide by prevailing GST act. 2. L1 (lowest quote) will be determined based on the total quoted amount including GST. 3. This BOQ specification has to be read in conjunction with detailed technical specification and tender drawings if any. 4. Please refer Tender document carefully and understand full scope of work, Terms and conditons, if required visit the site and then submit your quote as no clarification will be entertained later on account of ignorance of the work/site. 5. Due to excel row/column limitation, all the row/column contents may not be visible. In such cases, the contractor is instructed to click the row/column to see the full content as ignorance of the content will not be entertained later on account of non-appearance of full content due to row/column limitation.

Pre-Qualification Profile (To be Uploaded along with Part - A)

Contract Number:

Name of the individual/ Firm/ Company:

Estimation Amount In Rs:

Tender Notice Date:

GST ID No. For HAL

Name of the individual/ Firm/ Company: *Mandatory

Type of ownership

If Other, please specify

Details of Constitution or Legal Status such as certificate of Incorporation, shops and establishments, Contractor registration

Address for Correspondence

Contact Details

Contact Person Name

Designation

Mobile no

Ph. No with STD Code

FAX. No with STD Code

Email Id

Registered Contractor

If Registered Contractor with HAL YES/NO

Registration No

Category

PEMD amount (if paid)

I.T Returns for past 03 Years (Assessment Years)

Average Annual Financial Turnover during the last 3 years, ending 31st March 2023 of the previous financial year[should not be less than 30% of Amount put to tender]

ESI & PF Nos. with proof

ESI Registration No. with proof [Mandatory]

PF Registration No. with proof [Mandatory]

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Bank Account No.

Name of the Bank

Type of Account

Branch, Place

Bank Code No.

MICR No.

ECS No.

IFS Code No.

Latest Bankers Solvency certificate from any Nationalized /Scheduled Bank issued NOT before 12 months from the last date of Tender submission .

Name of the Bank & Branch

Date of issue

Value in Rs.

Solvency Value is as per NIT

Experience of having successfully completed similar works during last 7 years ending last day of previous month [ Latest work experience certificate may be uploaded] (i) Three similar completed works each costing not less than an amount equal to 40% of estimated cost. (ii) Two similar completed works each costing not less than an amount equal to 50% estimated cost. (iii) One similar completed work costing not less than an amount equal to 80% estimated cost.

Completed similar works during last 7 years

Work No I

Brief Description of Work

Completed value of Work in Rs.

Date of Commencement of Work:

Date of Actual Completion of work:

Work No II

Brief Description of Work:

Completed value of Work in Rs.

Date of Commencement of Work:

Date of Actual Completion of Work:

Work No III

Brief Description of Work:

Completed value of work in Rs.

Date of Commencement of Work:

Date of Actual Completion of Work:

Details of person holding the Power of Attorney ( if different from the contact person)

Designation

Mobile no

Ph. No with STD Code

FAX. No with STD Code

Email Id

Documents Need to Uploaded

IT Return, Profit & loss and Balance Statement for the Financial Year duly mentioned above certified by the Chartered Accountant.

DECLARATION I

The document being viewed / downloaded from the website and having read & understood all the contents of the tender document mentioned under terms and conditions Including price bid do here by accept all the terms and conditions laid doen In the said Tender document and will abide by the same on acceptance and ward of work.

DECLARATION II

I/We declare and confirm that - 1. All Information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false Information provided herein will result In the rejection of my offer. 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I/We aware that document sought only be uploaded for evaluation of offer.