WBPWD/EE-WKED/NIQ-07/2024-25

Amount

SITC of MRL Automatic Lift ( as per manufacturer design & as per detailed specification below conforming to IS ) and putting into operation after final testing in the existing lift shaft complete with all accessories and repairing the damage wall / floor if any etc to complete as reqd.

Make : OTIS / KONE/SCHINDLER

Type: Passanger Lift .

Load : 5 Passenger / 340 Kg

Control: Microprocessor based with AC variable voltage & variable frequency ( VVVF)

Machine:- Energy efficient machine, Gearless, Machine Room Less

Position of Machine Room: Directly above the lift shaft

Speed: 1.0 Mtrs./ Sec

Floor served: G + 1

Landing: 2 stops & 2 openings, Single entrance car on same side

Total Rise : 3.5 Mtr

Operation: Microprocessor based simplex full collective with or without attendant. (as per direction/approval of the E.I.C/Authority)

Signals: Digital car position indicator,car travels direction indicator in car & at all landing with call registration indicator.

Leveling accuracy:± 5 mm(Micro levelling arrangement )

Car inside :1000mm ( W ) x 950mm ( D ) x 2200mm (H)

Car Entrance:Clear Opening:- 700 mm (W) x 2000 mm (H ) protected with car door

Car Enclosure: Stainless Steel sheet (20 SWG) with Hairline finish with hand rail.

Car Ceiling & Lighting: Stainless Steel with hairline finish with LED lighting and Fan

Car Ventilation: Pressure fan with anodised aluminium grill.

Car Flooring : Decorative granite flooring (As per direcion of EIC and according to this Department's Order).

Car Door: Stainless Steel centre opening automatic door provided with V3F controlled door drive system

Landing Door: Stainless steel centre opening automatic door provided with V3F controlled door drive system

Door Opening: Automatic power oprated door with full length Photocell assembly light curtain sensor

PROTECTIVE DEVICES & OTHER ACESSORIES

ARD: Automatic rescue device complete with dry maintenance free batteries as required.for automatic evacuation to the nearest floor in case of power failure / single phasing/others.

Overload Protection:Fully loaded with overload protection.On overloading the lift car will not start with door remaining open and give audio display indication.

Emergency lighting in car: Battery operated emergency lighting in the lift car.

Intercom system: Battery operated intercom system in Lift Car, Machine Room & Control Room.

Emergency Alarm: Battery operated alarm bell system in lift car and control room.

Door time protection.

Fireman switch: Fireman switch at main landing terminal.

Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator.

Main rope/Belt - As per manufacturer's standard conforming to respective applicable IS

DIMENSION OF SHAFT & POWER SUPPLY

Available Shaft Dimension: 1400 mm (W) X 1300 mm (D)

Available Pit Depth :1350 mm

Available Overhead : 4500 mm

Electric power supply: AC 415 Volt 3phase, 50 Hz, terminated in machine room as per IS

N.B. Rates should be quoted with minor civil works, wall cutting and mending good the damages to the original finish.

Add. G.S.T.@ 18% on total value.

Add. LWC.@ 1% on total value

SCHINDLER INDIA PRIVATE LIMITED (BID ID -5507966)