MISC REPAIR TO PATHWAY SECURITY FENCE IN ZONE I MALL MANDIR CHURCH TIGRIS DELHI AREA MANEKSHAW MARG IN THE AREA OF AGE BR I UNDER GE EAST DELHI CANTT 10

Amount

Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/loose soil, complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil, complete all as specified.

Excavating in post holes ( or similar holes ) each n.exc 0.5 cum in soft /loose soil getting out ,returing filling in and ramming around in layers not excedding 25 cm complete all as specified

M & L for removing excavated soils exc. 500m n.exc 1.5 km complete all as specified.

Dismantling of Barbed wire galvanised 2 strand of any type and at any place fixed to wooden members steel or RCC post complete all as specified & directed.

M & L for PCC 1:4:8 Type D2 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified.

M & L for Brickwork with subclass‘B’ bricks, straightor curved on plan to any radius in half brick thickwalls built in CM 1:4 complete all as specified.

M & L for brick work with subclass `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified.

S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe .290.Gde-E-165 complete all as specified.

S&F Mild steel screw bolts ( machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut , n exc 5 cm long AND 5 TO 10 MM DIA SHANK complete all as specified .

S & F for 0.80mm thick mild steel, plain & black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles as required including dismantling the cold sheet as required complete all as specified

Expanded metal weight n .exc 4 kg/sqm , cut to length, Bent to shape required incl welding and tying with and including annealed mild steel wire not less than 0.9 mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified.

S&F Galvanised. 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails strain-ing bolts,including, securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins , etc, as directed (each line wire to be measured) complete all as specified.

S & F for 2mm thick fibre glass reinforced translucent plain sheeting fixed with coach screw and washer in roof, wall etc.including dismantling of old sheet complete all as specified.

S&F Pre-Painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall,including dismentling fixed with self tapping screws including dismantling of old sheet complete all as specified.

18 to 20mm thick granite slab (table rubbed and polished) as in steps, jambs, pillars, window cills cooking platform and the like, bedded and jointed in cement mortar 1:4 and pointed with white cement with admixture of pigment to match with shape of Granite laid over bedding layer of 15mm thick cement mortar 1:4 including demolition of old stone slabs and tiles of any description, complete all as specified and as directed.

M&L Machine cut cudappah stone slab 20-25 mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L 75mm thick cement concrete 1:3:6 type B2 using 40mm graded stone aggregate as in plinth/sub base. Complete all as specified.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.

M & L for Glazed Coloured designer ceramic tiles in vertical surface 300x450x7mm thick laid over 10 mm thick screed bed in CM 1:4,set and joint in neat cement slury and pointed in white or colour cement to match, the shade of tiles complete all as specified and directed.

M & L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified.

M & L for non skid ceramic tiles 7 to 8mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr in Charge

M & L for Machine pressed rubber moulded vibro compacted precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with Grey cement and pigment over 30 mm thick sand coushioning complete all as specified.

M&L for coloured chequered Cement concret tile glazed finish 30cmx30cmx2.5cm ,machine pressed; set jointed and pointed in neat cement slurry in floors, with grey cement and pigments laid over 15 mm thick screed be in CM 1:6 complete all as specified.

M & L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces (Cement plaster 1:4) finished even and smooth without using extra cement

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces (Cement plaster 1:4) finished even and smooth without using extra cement

M & L preparing new plastered or unplastered surface of walls and applying 2 coats of white wash as on walls.

M & L preparation of new steel surface and apply two coatsof synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Dismantling posts or struts (woo,steel, or RCC) any section, incl taking out embedded portion & making good disturbed ground,post embedded in concrete , brick work, masonary etc.

Demolition of cement concrete in ground floors of any description and in any position not otherwise specifically provided (un reinforced) complete all as specified.

M & L pre-cast cement concrete kerb stone type B-1(20 mm graded Aggregate) of size 300x300x150mm thick and setting in CM 1:4 complete all as specified.

M & L for providing cement concrete 1:2:4 Type B1 using 20mm graded aggregate as in lintels upto 1.5m clear span, cills,seismic and other similar bands, plinth courses, copings,Bed blocks,and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified.

M & L for providing precast cement concrete 1:2:4 type B1 using 20mm graded aggregate louvres and jallies, 40mm thick (measured solid), including all mouldings set in CM 1:4 complete all as specified

Dismantling of RCC Jalli of any description and in position and unserviceable Jalli removed from site and serviceable RCC Jalli stactaking at site after cleaning/dusting for fixing the same as directed by Engineer in Charge.

S&F of Concertina coil 900mm dia (in stretched position) hot dip galvanized steel wire coated with CLR anti corrosive paint, making diamond shape with the help of dove tail clips (18 SWG) fixed over barbed wire with angle iron including tying concertina coil with barbed wire at points wherever coil toucheds the bottom of barbed wire with the help of hog rings (14 SWG) complete all as specified and directed (Barbed wire and angle iron shall be measured and paid separately) Note: Hogging shall be fixed at a interval of 600mm c/c wherever it touches with the barbed wire and overlapping of concertina coil and Barbed wire shall be 300mm. It shall be deemed to be included in the unit rate.

S&F Precast RCC coping /post suitable for fixing of RCC jalli in vertically and horizontally incl necessary moulds and grooves as reqd shape and size complete all as specified and directed.

Form work to edges of concrete flat, breaks in floors and sides of RCC/PCC bands in walls, horizontal or sloping for flat or curved surfaces and similar work exc 10cm but n.exc 20cm wide with rough finished surfaces of concrete complete all as specified and directed

M&L Providing pre-cast cement concrete 1:2:4 type B1 in landings, coverslabs (for man holes ,drains etc.)®etc complete all as specified & directed

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, spirally for hopping for columns, hooking ends, and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-S or Fe-410-0 complete all as specified & directed

M&L for hard core using broken stone or boulders of gauge not exc 63mm, deposited, spread, levelled, watered and well rammed to a true surface, complete all as specified and directed by Engineer-in-Charge.

M&L for screed bed or bedding layer of in CM (1:4) 15mm thick for laying floor finishes complete all as specified

M&L Marble work (Udaipur green) 15 to 18 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade incl moulding the edges etc complete all as specified and directed.

M&L for applying two coats of exterior acrylic emulision paint (Apex of Assian paint or equivalent make approved by GE from list of make given in tender) over a coat of primer on external walls/floor surface as in narrow with not exc 100 mm wide complete all as specified and all as directed.

S & F for stainless steel sign board both sides comprising of the followings:- (a) Two Nos of Stainless Steel Pipe 100mm dia Heavy gde of length 4000mm incl top fancy cap and at bottom four no of anchors for embedding in PCC (b) Stainless Steel 50 mm Square Pipe frame of size 2500mm x1250 mm at one side welded butt and bright finished fixed to SS pipe with stainless steel Cup Head Screw of suitable Size. (c) Providing 2.00mm thick anodised aluminium sheet of size 2500mmx1250mm fixed with ss scerw to SS Square tube complete. (d) Complete layering of any Colour retro reflective Poly carbonate trimethane sheet cut to shape and fixed over base plate as per IRC-67-1977 of any colour complete all as specified and directed. (e) Providing of 50mm wide retro reflective Poly carbonate white Bordar retro reflective Poly carbonate sheet all around complete. (f) S & F of retro reflective Poly carbonate trimethane sheet letters / sign/arrow/dash etc cut to shape and fixed over base plate as per sample of any colour of size 50 mm x300mm (Widthxheight) complete all as specified and directed Make : 3M/gogiaplastic Note – Location and sample of Sign board work shall be approved by GE.

S&F Stainless steel letter,comma,dash ,logo etc of 300mm height and 32mm depth made of 1mm thick stainless sheet with seemless welding rubbed, polished and edges made smooth with necessary fixing devices complete all as specified and directed by Engr in charge

S&F, Aluminium composite panel sheet 3mm thick of approved make joint with cilicon/adhesive as per manufacturer instrction incl with necessary MS framed work as required shape and sized by welding etc in ceiling/coloumns and in vertical surface complete all as specified and directed. Note : 1. MS framed work shall be measured and paid separately. 2. Colour and pattern of Sheet will be appoved by GE 3.The rates of necessary scafolding and working platform is included in quoted rate and work is to be carried at approximate 4mtr height.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complet

Demolition of Stone slabs and tiles laid, bedded and pointed in any description or thickness in floors, aprons etcrubbish off the premises complete.

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

M & L for OUT DOOR coloured ceramic tiles 8 to 9 mm thick (square/rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified MAKE-ENDURA BY NITCO OR EQUIVALENT

Cutting holes in brick wall exc half brick but not exc one brick built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 (20mm graded stone aggregate) complete all as specified and directed.

S&F for Mild steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt weldedtubes conforming to I. S.1161- 1979 grade St.-240 including cutting etc complete all as specified. including dismantling of existing truss.

M&L for steel gate Ornamental type/Grill work including hold fasts, pintels, stoppers running rails, bushes and all as CI decorative pieces, locking arrangement etc complete all as per design approved and as directed by Engr-in-charge work conforming to Fe-410-O etc complete.

S & F for stainless steel sign board both sides comprising of the followings:- (a) Two Nos of Stainless Steel Pipe 75mm Heavy gde of length 2100 mm incl top fancy cap and at bottom four no of anchors for embedding in PCC (b) Stainless Steel 25 mm Square Pipe frame of size 1200 mm x750 mm at one side welded butt and bright finished fixed to SS pipe with stainless steel Cup Head Screw of suitable Size. (c) Providing 2mm thick anodised aluminium sheet of size 1200mmx750mm fixed with ss scerw to SS Square tube complete. (d) Complete layering of any Colour retro reflective Poly carbonate trimethane sheet cut to shape and fixed over base plate as per IRC-67-1977 of any colour complete all as specified and directed. (e) Providing of 25mm wide retro reflective Poly carbonate white Bordar retro reflective Poly carbonate sheet all around complete. (f) S & F of retro reflective Poly carbonate trimethane sheet letters / sign/arrow etc cut to shape and fixed over base plate as per IRC-67-1977 of any colour of 25mmx150mm (Widthxheight) complete all as specified and directed .Make 3M/gogiaplastic as approved by GE. Note – Location and sample of Sign board work shall be approved by GE.

R. S. Associates

Simran construction Company

V r traders

A R construction

Bhasin Construction Co

G and G Infratech Private Limited