Construction of work Sikandra-Samthar SH to the Pipra Hanuman Temple via the Barai Mata Temple.

Construction of embankment with approved material obtained from borrow pits with spreading, grading to required slope requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5

Construction of sub-grade by providing borrow pit material with 2% Lime , spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401

Providing,laying and spreading material on a prepared sub grade,adding cement @2% by weight to the spread material manualy, mixing in place with rotavator and compacting with the road roller at OMC to achieve the desired unconfined compressive strenght and to form a layer of sub base. CTSB

Providing,laying and spreading material on a prepared sub Base,adding cement @4% by weight to the spread material manualy, mixing in place with rotavator and compacting with the road roller at OMC to achieve the desired unconfined compressive strenght and to form a layer of base. CTB

Providing and applying tack coat with Bitumen (V.G.-10 Gr.) using Bitumen distributor at the rate of 0.30 kg per sqm on the prepared Garnular surface cleaned with Hydraulic broom as per Technical Specification Clause 503.

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen (VG-10 Gr.) to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of "Type-B" as per Technical Specification Clause 508.

Providing and laying seal coat by mannual means with VG-10 Gr. grade bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type "C" as per Technical Specification Clause 510

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of side

Fillling in foundation trenches as per drawing and technical specification Clause 305.3.9

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203