Work of Power arrangement at newly located view point at Chamatu Patch by extension of JBVNL Power from JBVNL 500 KVA Transformer also painting of existing tubular poles under Magadh OCP, M-S Area.

Amount

Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter and above including binding etc. as required.

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Erection of angle iron/ channel iron cross arm on wood/ RCC/ PCC/ steel tubular/rail pole for 4 wire system.

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required .

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required .

Erection of angle iron/ channel iron cross arm on wood/ RCC/ PCC/ steel tubular/rail pole for 2 wire system.

Supplying and erection of 100 mm X 80 mm pin insulator complete with G. I. Spindle and nuts etc. as required.

Supplying and erection of 100 mm X 110 mm shackle insulator with G. I. Bolt, nuts and straps etc. as required.

Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, bow tightener, 7/ 3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supply of 6 SWG G.I Wire

Erection of G.I Wire no- 6/8 SWG including binding etc. as required

Disconnector fuse switch unit inside the existing pane board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required . 100 A

Painting with aluminium paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Total impact of GST for the purpose of CTC

M/S T K ENTERPRISES

M/S HEMANT KUMAR YADAV

M/S GAURAV KUMAR TIWARI