Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.7 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹16.4 L+₹1.3 L (8.75%)Rejected-AOC NEAR SVN UNIVERSITY NARSINGHPUR ROAD SIRONJA SAUGOR MP 470228 | SAUGOR | SAGAR | MP | 470228 | L2 | Rejected-AOC L2 | |
| 3 | L3₹16.6 L+₹1.4 L (9.53%)Rejected-AOC 58 CHANDRALOK BLDG MAYO HOSPITAL ROAD NAGPUR 440018 | NAGPUR | NAGPUR | MAHARASHTRA | 440018 | L3 | Rejected-AOC L3 | |
| 4 | Rejected-Technical B 134 GANESH MURTHI NAGAR PART III COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | - | Rejected-Technical NO in WLR |
Tender Value
Refer Docs
EMD Value
₹29,500
Closing Date
18 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF NAGPUR
OFFICE OF GARRISON ENGINEER AIR FORCE VAYUSENA NAGAR NAGPUR- 440007
REPAIR MAINT OF STPs OF VARIOUS CAPACITY AND SWIMMING POOL AT VSN NAGPUR
2022_MES_552664_1
GE/NAG/22-23/8556/34
Open Tender
Miscellaneous Works
Item Rate
180 days
GE AF NAGPUR
As per NIT
7 documents required · 7 mandatory
₹500
GE AF NAGPUR
₹29,500
6 Jan 2023
20 Sept 2022
25 Oct 2022
20 Sept 2022
18 Oct 2022
4 Oct 2022
Amount
STP 250 KLD (OMQ) Material and labour for cleaning of Equalisation sewage tank for 250 KLD STP (tank size 5.0x5.0 m x 5 m water depth ) (total height of tank 5 mtr) by cleaning entire internal surface by removing dirt, sludge etc and throw out to not exceeding of 50 mtr from site with wire brush by applying bleaching powder and fresh water and clean entire surface repeatedly with fresh water and draining out soiled water including using sludge cutter pump and suction pump of suitable capacity surface complete in all, using acid and other suitable methods, taking out air piping , descaling , clear holes and refixing the same all as specified and directed by Engineer-In-Charge. Note -Quoted rates shall include for using fresh water for cleaning & sludge cutter pump and ladder for man entering into tank for removing of sludge from tank and de-watering will be the contractor scope under his own arrangement, use of suitable chemical for descaling the air /water piping complete .
Material and labour for taking out MBBR media from tank cleaned with suitable chemical for refilling after cleaning of MBBR tanks , M&L for cleaning of MBBR REACTOR TANK of size 1.8x1.8 x5 m for 250 KLD STP by cleaning entire internal surface by removing dirt, sludge etc with wire brush by applying bleaching powder and fresh water. The cleaning of tank includes following . (a). Taking out MS/HDPE pipe with stainer, descaling the pipe and taking out stainer , cleaning of stainer / repair by suitable welding or replacement of stainless steel bars / sheet as required at site. (b). Descaling of air grid and cleaning of holes for air piping. (c). Descaling of interconnecting MS piping. (d). Applying all piping inside MBBR tanks and inner surface of Tanks with two coats of epoxy paint over coat of red oxide primer .
Material and labour for taking out Tube Settler media from tank cleaned with suitable chemical for refilling after cleaning, Material and labour for cleaning of TUBE SETTLER TANK of size 3.8.0m x 2.2 m x 2.7m for 250 KLD STP by cleaning entire internal surface by removing dirt, sludge etc with wire brush by applying bleaching powder and fresh water and clean entire surface repeatedly with fresh water and draining out soiled water, Cleaning of chanels and applying the channels inside Tube setteler tank and inner surface walls of tanks with Two coats of Epoxy Paint over a coat of red oxide primer . Note -Quoted rates shall include for using fresh water for cleaning & sludge cutter pump for removing of sludge from tank and de-watering shall be the contractor's scope under his own arrangement.
Material and labour for cleaning of HYPO SOLUTION TANK/Chlorine contact tank for 250 KLD , size of tank 4m dia x 3.0 m x1.5 by cleaning entire internal surface by removing dirt, sludge etc with wire brush by applying bleaching powder and fresh water and clean entire surface repeatedly with fresh water and draining out soiled water all as specified and directed by Engineer-In-Charge . Note -Quoted rates shall include for using fresh water for cleaning & sludge cutter pump for removing of sludge from tank and de-watering shall be contractor's scope under his own arrangement.
Material and labour for cleaning of TREATED WATER TANK for 250 KLD , size of tank 4m x 6.25 mx2.2m by cleaning entire internal surface by removing dirt, sludge etc with wire brush by applying bleaching powder and fresh water and clean entire surface repeatedly with fresh water and draining out soiled water including using pressure jet pump and suction pump capacity of pool surface complete in all , applying inner and outer walls of treated water tank with 2 coats of white wash complete all as specified and directed. Note -Quoted rates shall include for using fresh water for cleaning & sludge cutter pump for removing of sludge from tank and de-watering will be contractor scope under his own arrangement.
Painting work: Painting of the following Installed Machineries at 250 KLD STP scrapping existing paint and spraying two coat of synthetic enamel paint over one coat of primer as per colour coading using Asian/Berjer paint manufacturer all as directed Pump Set with motor :- 06 Nos. Sand Filter :- 01 Nos. ACF-01Nos Air Blower with motor -02 Nos Sewage lifting pump :- 02 No. LT Panel/Control panel-01 nos MBBR-02 Nos, Tube Settler - 1 Nos All the suction/discharge pipe lines complete length for 250 kld stp
STP 450 KLD (SMQ) Material and labour for cleaning of Equalisation sewage tank for 450 KLD STP (tank size 13.9 m dia x 5.5 mtr height water depth ) (effective volume 378 m3 total height of tank 5.5 mtr) by cleaning entire internal surface by removing dirt, sludge etc and throw out to not exceeding of 50 mtr from site with wire brush by applying bleaching powder and fresh water and clean entire surface repeatedly with fresh water and draining out soiled water including using sludge cutter pump and suction pump suitable capacity complete in all , using acid and other suitable methods before filling as required at site all as specified and directed by Engineer-In-Charge Note -Quoted rates shall include for supplying of fresh water for cleaning & sludge cutter pump and ladder for man entring in to tank for removing of sludge from tank and de-watering will be the contractor's own arrangement.
Material and labour for cleaning of MBBR REACTOR TANK sewage tank capacity (volume 125m3) free board 800 mm, size of tank 5.65m dia x5m swd for 450 KLD STP by cleaning entire internal surface by removing sludge/dirt, old Unserviceable floating media and cleaning all floating media with fresh water. Dismantling of old MS pipe 100 from MBBR tank and re-fixing sewage pipe from MBBR to equalisation tank, cleaning inside and outside dia of pipe using pressure jet machine. The rate shall also include for dismantling cleaning, painting by black colour synthetic enamel paint of two coat and re-fixing. The rate shall also inlcude for cleaning of all air out going pipe 40 mm from air blower to sewage equalization and MBBR tanks , and applying bleaching powder into the wall surface and clean with fresh water entire surface repeatedly with fresh water and draining out soiled waste water including using pressure jet pump and suction pump of suitable capacity complete in all respect complete all as specified and directed. Note -Quoted rates shall include for using fresh water for cleaning & sludge cutter pump for removing of sludge from tank and de-watering will be the contractor's own arrangement.
Material and labour for cleaning of TUBE SETTLER TANK/ sewage tank capacity size of tank 10.0 m x 2.7 m swd, free board 300 mm for 450 KLD stp by cleaning entire internal surface by removing dirt, sludge etc with wire brush by applying bleaching powder and fresh water and clean entire surface repeatedly with fresh water and draining out soiled water including using pressure jet pump and suction pump of suitable capacity complete using acid and other suitable methods before filling as required at site complete all as specified and directed. Note -Quoted rates shall include for using fresh water for cleaning & sludge cutter pump for removing of sludge from tank and de-watering will be the contractor's own arrangement.
Material and labour for cleaning of HYPO SOLUTION TANK/Chlorine contact tank for 450 KLD , size of tank 6m dia x 2.0 m swd , free board 300mm 450 kld stp by cleaning entire internal surface by removing dirt, sludge etc with wire brush by applying bleaching powder and fresh water and clean entire surface repeatedly with fresh water and draining out soiled water including using pressure jet pump and suction pump capacity of pool surface complete in all, using acid and other suitable methods before filling as required at site all as specified and directed by Engineer-In-Charge Note -Quoted rates shall include for using fresh water for cleaning & sludge cutter pump for removing of sludge from tank and de-watering will be contractor's own arrangement.
Material and labour for cleaning of TREATED WATER TANK for 450 KLD , size of tank 10m dia x 4.0 m , free board 300mm 450 kld STP by cleaning entire internal surface by removing dirt, sludge etc with wire brush by applying bleaching powder and fresh water and clean entire surface repeatedly with fresh water and draining out soiled water including using pressure jet pump and suction pump capacity of pool surface complete in all, using acid and other suitable methods before filling as required at site all as specified and directed by Engineer-In-Charge Note -Quoted rates shall include for using fresh water for cleaning & sludge cutter pump for removing of sludge from tank and de-watering will be contractor scope under his own arrangement.
Material and labour for cleaning of SLUDGE HOLDING TANK for 450 KLD by dewatering and taking out all the sludge deposited in tank also cleaning entire internal surface by removing dirt, sludge etc with wire brush by applying bleaching powder and fresh water and clean entire surface repeatedly with fresh water and draining out soiled water including using pressure jet pump and suction pump all as specified and directed by engineer-In-Charge Note -Quoted rates shall include for using fresh water for cleaning & sludge cutter pump for removing of sludge from tank and de-watering will be contractor scope under his own arrangement.
Painting work: Painting of the following Installed Machineries at 450 KLD STP scrapping existing paint by steel wire brush and spraying two coat of synthetic enamel paint over one coat of primer for following items with using Asian/Berjer paint manufacturer all as directed Pump Set with motor :- 06 Nos. Sand Filter :- 01 Nos. ACF-01Nos Air Blower with motor -02 Nos submersible pump :- 02 No. LT Panel/Control panel-02 nos All the suction/discharge pipe lines complete length for 450 kld stp
S & F in repair Cast iron foot valve of size 150 mm confirming to IS:4038 with rubber seating, flanged end complete including taking out old unservicable all as specified and as directed by Engr in charge Make: Kirloskar Leader /Venus/
Material and labour for cleaning of swimming pool (size 25mx13.5m) by cleaning entire internal surface by removing dirt, sludge etc with wire brush by applying bleaching powder and fresh water and clean entire surface repeatedly with fresh water and draining out soiled water including using pressure jet pump and suction pump capacity of pool surface complete in all, using acid and other suitable methods before filling as required at site all as specified and directed by Engineer-In-Charge Note -Quoted rates shall include for filling the swimming pool as per requirement.
Material and labour for cleaning of level tank for swimming pool using acid and other suitable methods before filling as required at site all as specified and directed by Engineer-In-Charge
Material and labour for cleaning of Baby pool tank for swimming pool using acid and other suitable methods before filling as required at site all as specified and directed by Engineer-In-Charge
Painting work: Painting of Installed Machineries at Swimming Pool Pump House by scrapping existing paint and spraying two coat of synthetic enamel paint for following items with using Asian/Berger paint manufacturer all as directed Pump Set :- 02 Nos. Pressure Filter :- 02 Nos. Dosing Pumps :- 03 Nos. including dosing tanks Suction Sweeper :- 01 No.
STP 250 KLD (MAP) Material and labour for cleaning of Equalisation sewage tank for 250 KLD STP by cleaning entire internal surface by removing dirt, sludge etc with wire brush by applying bleaching powder and fresh water and clean entire surface repeatedly with fresh water and draining out soiled water including using pressure jet pump and suction pump suitable capacity surface complete in all in as specified and directed. Note -Quoted rates shall include for using fresh water for cleaning & sludge cutter pump for removing of sludge from tank and de-watering will be the contractor unser his own arrangement.
Material and labour for cleaning of MBBR REACTOR TANK/TUBE SETTLER TANK/ sewage tank for 250 KLD STP by cleaning entire internal surface by removing dirt, sludge etc with wire brush by applying bleaching powder and fresh water and clean entire surface repeatedly with fresh water and draining out soiled water including using pressure jet pump and suction pump of suitable capacity complete all as specified and directed. Note -Quoted rates shall include for using fresh water for cleaning & sludge cutter pump for removing of sludge from tank and de-watering will be the contractor under his own scope arrangement.
Material and labour for cleaning of HYPO SOLUTION TANK/TREATED WATER TANK/ sewage tank for 250 KLD STP by cleaning entire internal surface by removing dirt, sludge etc with wire brush by applying bleaching powder and fresh water and clean entire surface repeatedly with fresh water and draining out soiled water including using pressure jet pump and suction pump capacity of pool surface complete all as specified and directed. Note -Quoted rates shall include for using fresh water for cleaning & sludge cutter pump for removing of sludge from tank and de-watering will be contractor scope under his own arrangement.
Material and labour for cleaning of Sludge dryer TANK for 250 KLD STP by cleaning entire internal surface by removing dirt, sludge etc with fresh water and clean entire surface repeatedly with fresh water and draining out soiled waste material including using suitable equipment / tools surface complete and applying 02 coats of white colour cement based paint all as specified and directed by Engineer-In-Charge Note: The waste shall be collected from sludge dryer tank and handover to department without any extra cost
Painting work: Painting of Installed Machineries at STP Pump House of the followings: Using scrapping existing paint and spraying one coat of synthetic enamel paint over one coat of primer for following items with using Asian/Berjer paint manufacturer all as directed Pump Set with motor :- 06 Nos. Sand Filter :- 01 Nos. ACF-01Nos Air Blower -02 Nos Suction Sweeper :- 01 No. LT Panel/Control panel All the suction/discharge pipe lines complete length
Supply only and make liquid form suitable for dosing machine and pore to dosing plant will be in Contractor scope as directed by Engr-In-charge of Trichloroisocyanuric Acid (90%) (C3CI3N303) Chlorine Granuals (90%) Size 5-8 Mesh Appearance : White Granuals Effective Chlorine : 90%,pH : 2.7 to 3.3 Note: Mixing & dosing will be in Contractor scope as directed BY Engr-In-charge
Testing of treated water sample collected from vayusena nagar nagpur and testing report required from through reputed laboratory as per BIS -10500:2012 for sewage treated water are required following test: Following parameters for waste treated water should be maintained by the contractor of STP plant and accordingly dosing shall be done PH 6.5-8.5 Dissolved Phosphorous MG/L TDS MG/L Nitrate Nitrogen as N MG/L Turbidity NTU Helminthic Eggs Count/L TSS MG/L Colour Temperature Centigrade Odour Oil & Grease MG/L Helminth Egg Res. Chlorine MG/L Sulphate MG/L Total Kjeldhal Nitrogen MG/L Chlorides MG/L BOD MG/L Acidity MG/L COD MG/L Note: Testing of sample shall be done quaterly basis
Supply only hypo solution (NAOCL) in HDPE container of capacity 50 Kg complete all as specified and directed.
M & L for replacement of tube duck media for tube settler tank for 250 KLD and 450 KLD complete all as specified and directed.
Taking out unserviceable & Supply and install, testing , commissioning flow meter electromagnetic type, average flow 2.0 mld model no FSG-10 make FLOW STAR ENGINEERING PVT LTD OR ISI MARK
Taking out U/s ladder and Supply and fix in (STP UG sump ) wall supported steel ladder 15 feet long made of SS 304 material heavy grade complete all as specified and directed. Note The rate shall be included welding and pcc work required for fixing of ladder.
Air Blowers For STPS M&L for opening air blower set twin lobe type of capacity 270 m3/hr with head of 0.65 mmwc make USHA or equivalent with blower & motor 7.5 H P coupling after isolating the electric and air pipe connections opening the air compressor set for repair/overhauling including necessary lathe work if necessary & servicing of compressor, re-assemblying the compressor, greasing connecting, testing including proper alignment and commissioning complete all as specified at 450 KLD/ 250 KLD STP at AF Vayusena Nagar complete all as specified and directed.
M & L for Rewinding of 3 HP pump motor 415 Volt 3 phase after disconnecting electric cable and earth lead, suction and delivery pipes, shifting to work shop, dismantling the motor assembly and removing the burnt out copper winding of stator and cleaning the stator slots and core assembly, rewinding to stator with suitable gauge super enamelled copper wire with insulating papers and insulation cloths, varnishing the winding and baking heating for achieving the required insulation resistance, re-assembling the motor and testing complete, including transporting back to site and fixing motor to its original place, reconnecting electric cable and earth leads etc testing and commissioning complete in all respect all as specified and as directed by Engr-in-charge
All as per Item No 31.00 herein before but of 15 H P
All as per Item No 31.00 herein before but of 7.5 H P
Comprehensive maintainance and repair of centrifuge machine capacity 1.3m3/hr type solid bowl ALDEC 10 solid density 3.0 kg /m2, RPM 5300 MIN feed TEMP 0 centigrate and maximum temp 60 degree centigrate make Alfa level copenhagen . Note The rate quoted shall inclusive of following:- (a) Inspection of seperator Bowl (b)Inspection of inlet and outlet (c) Inspection of operating water system (d) Replacement of seals and gaskets (e) Lubrication oil change (f) Replacement of worn rout bearings (g)Inspection of control panel and repair/replacement of damaged /wornout parts (h)Modification of outlet water pipe from centrifuge to equilisation tank as directed by Engineer In Charge. (i) Overhualing of motors , replacement of wornout bearings Note : Contractors are advised to visit site to acertain the excact condition of unserviceable Centrifuge model ALDEC 10 of make Alfa Laval and Panel before quoting .
Taking out old unserviceable MS pipe and Fabricate and fixing of MS ERW pipe, nominal dia 50mm-125 mm , as per IS 3589 (1981), heavy grade, including MS flanges , fixing of butterfly / sluice valve including necessary nuts, bolts and rubber gasket etc, complete all as specified and directed. Make : Jindal/Surya prakash/Tata NOTE:- The quoted rate shall deemed to be included for welding work , bend to making header for STPs or fixing in the existing pipe complete all as specified and directed.
Taking out unserviceable butterfly valve of size 100 mm bore and supply and fix new butter fly valve wafer type in CI Body with integrally moulded liner of nitrile or EPDM stainless steel Disc & stem, Liver operated as per IS 13095 in PN 1.0 in including jointing material such as rubber gasket, bolts, nuts etc direct integrally all as specified and as directed by Eng-in-Charge Make: Kirloskar/ISI MARK or kARTAR ,
Taking out unserviceable butter fly valve of size 80 mm bore and supply and fix new butter fly valve wafer type in CI Body with integrally moulded liner of nitrile or EPDM stainless steel Disc & stem, Liver operated as per IS 13095 in PN 1.0 in including jointing material such as rubber gasket,bolts,nuts,etc direct integrally all as specified and as directed by Eng-in-Charge Make: Kirloskar/ISI MARK or kARTAR ,
Supply and Fix in repair underground armoured, PVC insulated, PVC sheathed, multi stranded copper conductor cable of 4 Sqmm 3 core, 1100 volts grade confirming to IS 694 and connecting complete including taking out old unserviceable damaged cable complete all as specified and directed. Make: Havells/Finolex/Polycab
All as per Item No 39.00 herein before but of size 6 sqmm 3 core
All as per Item No 39.00 herein before but of size 10 sqmm 3 core
M/S JAINENDRA KUMAR JAIN
Paragon Electrotechnics
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .