SPECIAL REPAIRS TO BUILDING NO P-4, P-7 AND P-13 AT PAO QUARTERS, S OF A, UNDER GE DEOLALI

Amount

Demolition of brickwork of stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and as directed.

M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed.

All as per item No.02 above but except burnt bricks.

Taking down cement plaster any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick plaster in cement mortar (1:6) on faces of brick work or concrete surfaces, even smooth and finished surface complete all as specified and as directed.

M&L for 1.5mm thick wall care putty on wall/ceiling complete all as specified and as directed.

M&L for rendering 15mm thick plaster in cement mortar (1:4) on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5mm thick plaster in cement mortar (1:3) on faces of brick work or concrete on surfaces of ceiling, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparing new plastered or unplastered surfaces of ceiling, and applying three coats of white wash complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls, and applying three coats of white wash complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls, and applying two coats of oil emulsion distempering over a coat of interior wall primer complete all as specified and directed.

Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and as as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (incl backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed .

M&L for Glazed ceramic tiles of size 350mm x 250mm x 7mm/ 450mm x 350mm x 7mm thick (coloured) of superior quality fixed on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry over 10mm thick backing coat in CM (1:4) and pointed in coloured cement to match complete all as specified and directed.

M&L for 10mm thick Vitrified ceramic tiles dark shade (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.

All as per Sl item No 15 above but in skirting over 10mm thick backing coat in cement mortar(1:4) complete all as specified and directed.

M&L for non skid ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.06 but n exc 0.11 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete including screed bed 15mm thick in CM (1:6) complete all as specified and as directed.

All as per item No 18 above, but as in skirting over 10mm thick backing coat in cement mortar (1:4).

M&L for Machine cut kota stone slab on steps tread/riser/window cill in single piece of any size 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete including screed bed 15mm thick in cement mortar (1:6) complete all as specified and as directed.

M&L machine cut cudappa stone slab 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for Granite (of any type) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types including 15mm thick screed bed in cement mortar (1:6), complete all as specified and as directed.

M&L for 20mm thick green marble tiles machine cut in skirting/dado/window cill laid over cement screed and jointed with grey cement slurry, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of marble stone including cutting and polishing types including 15mm thick screed bed in cement mortar (1:6), complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

M&L for chequered cement concrete tiles 30cmx30cmx20mm thick Rubber moulded with grey cement and pigment, over and including 15mm thick screed in cement mortar (1:6), set jointed & pointed in neat cement slurry in floors complete all as specified and as directed.

M&L for precast cement concrete interlocking tiles 60mm thick Rubber moulded with strength 30 N/sqmm as in floor/pavement laid on 30 mm thick stone dust cushioning laid dry to the profile complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L for 30mm thick PCC (1:2:4) Type B1 with 20mm graded stone aggregate as in levelling course in floor complete all as specified and as directed.

M&L for cement concrete (1:5:10) type E2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection including making joint at every 3mtr interval and at corner and filled with mixture of bitumen and sand and finished even and fair and laid in alternate bays complete all as specified and directed.

Taking down carefully existing unserviceable bitumen felt/ APP membrane including plaster (any number of layers of any thickness) etc and removing of the rubbish to a distance not exceeding 500m from the building and depositing where directed .

M&L for rendering 10mm thick cement mortar (1:4) on roof slab top and sides finished even and smooth without using extra cement, mixed with water proofing liquid complete all as specified. Note: Water Proofing liquid shall be measured and paid separately.

M&L for providing plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) for filleting, benching,coving of chajjah top/junctions,padding concrete below roof treatment etc slightly rounded or chamfered on edges wherever required including necessary form work/moulds etc including applying cement slurry on surface area @2.50 Kg/Sqm complete all as specified and as directed .

M&L for cleaning the newly plastered surfaces of concrete (roof etc) with wire brushes and applying water proofing treatment as under :- i) Apply one coat of oil bound bituminous primer @ 0.25 kg/Sqm. ii) Providing and laying 3 mm thick APP modified water proofing membrane weighing not less than 3.5 Kg/Sqm reinforced with non woven polyester mat weighing not less than 160 gm/Sqm all as specified procured from any one of the approved manufacturer's. iii) Apply one coat of solar reflective bituminous aluminium paint @ 0.15 Kg/Sqm over membrane over non assesible roof surfaces complete all as per manufacturer's instructions and as directed .

Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work.

M&L for RCC (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) in chajjas.

Formwork to chullah hoods, chajjas, troughs and similar items including edges, flat rough finished surfaces of concrete

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

All as per item No. 38 above but 6mm to 8mm dia.

M&L for cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in coping, bed blocks, filling of hold fast PCC or similar works including formwork complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sq. m each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sq. m but n exc 4 sq m each complete all as specified and directed.

M&L for Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified and as directed.

M&L for Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified and as directed.

S&F for 35mm thick flush shutter, solid core construction, with particle board core and plywood face panels ,commercial type on both faces including teak wood beading 6mm thick all around complete all as specified and as directed.

S&F 2nd class H.W. glazed & skeleton shutter 35mm thick factory made open rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass,gauge etc size of members of shutter as specified in SSR part-I , section 8, clause 8.24 (a) complete all as specified and as directed.

M&L for preparation of new untreated wood and wood based surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of new untreated steel or iron surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F PVC door frames of sizes 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube in opening of suitable size complete all as specified and as directed.

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick with particle board core (stile:), with 2,4 or 6 raised panel design with 5mm thick Moulded PVC Sheet on the front Face & 5mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S & F powder coated sliding window, three track shutters, with sash bars, locking rails, locking arrangements including necessay joinery cleats, glazing clips, rubber packing, Chowkats aluminium snap beading, screws, suitable handle etc with and including sheet glass or ordinary glazing quality of 4mm thick and stainless steel wire loth 0.36mm nominal dia of wire and average width of aperture 1.40mm size of side rails , top rails , bottom rail 85x44.5mm and size of chowkat frame 101.6x44.45mm and thickness of aluminium member shall be 1.40mm thick complete all as specified in MES SSR, Part-I clause 10.37 all as specified and as directed.

S&F for powder coated aluminium ventilator shutters with frame not less than 0.60Kg/Rm, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick glass and outer side fixed with stainless steel wire mesh, shutters aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and as directed. and directed.

Dismantling of boarding any description fixed in any position with nails complete all as specified and as directed

M&L for Prelaminated particle board of 18/19mm thick, interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination with teak wood leaping fixed with screws as in cupboard shutters of bed room, kitchen and internal shelves complete all as specified.

S&F width of flaps (When open) in 40 mm continuous (piano) hinges, mild steel, bright finish or electrogalvanised.

S&F hasp and staple aluminium anodished safety type with mild steel hinges pin incl bolt to hinge plate and fixed with screw 125mm size.

S&F for door/shutter catcher, magnetic stopper/holder with striking plate for wooden particle board cabinets, cupboard shutters complete all as specified.

S&F for brass knobs 35-40mm dia complete all as specified.

S&F 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and as directed.

S&F aluminium floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified and as directed.

S&F 150mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150mm size aluminium anodized handle complete all as specified and as directed.

M&L for 250mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F in repair 20 mm stainless steel curtain rod with fancy type fixing brackets, stops, knobs rollers etc. complete all as specified and directed by Engr-in-charge.

S&F Mild steel as hold fasts Fe.290.Gde-E-165 complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 485mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

Fixing only in repairs vitreous china wash down water closet pan (pedestal pattern), white including connections to drain (or outgoing pipe ) and to flushing pipe anti syphonage pipe etc complete all as specified and directed

S&F in repair plastic water closet seat for pedestal/semi pedestal closet pan, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.

S&F in repairs wash hand basins, vitreous china,of size 550x400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of fixing of supply and waste pipe etc complete all as specified and as directed.

S&F in repair 15mm bore Bib taps CP fancy type, cast copper, screwed down, screwed for iron pipe or for brass ferrule and fixed

S&F in repair CP fancy type stop/angle cock, cast copper alloy, screwed both ends for iron pipe or for union of 15mm bore complete all as specified and as directed.

S&F for 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified and as directed..

S&F in repairs Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position fixed in repairs complete all as specified.

S&F in repair stainless steel soap dish, approximate size 120x85mm complete all as specified and as directed.

S&F in repair fancy type Toilet paper holder, steel chromium plated approximate size 140X140X50mm complete all as specified and as directed.

S&F in repair Brass chromium plated shower rose 125mm size complete all as specified and as directed.

S&F sheet glass corner wall mounted shelf assembly consisting of 8mm thick sheet glass 220mmX220mm size with chromium plated bracket guard and railing 50mm high complete all as specified and as directed.

S&F in repair brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges.

S&F in repairs 15mm bore two way mixing pillar/sink taps for mixing of hot/cold water or supply of fresh and cold water for WHB/Sink, chromium plated, fancy type with long screwed shanks complete all as specified and as directed.

S&F in repairs CP mixer for mixing (HOT/COLD) water , with wall cap of CP Brass, screwed down, screwd for iron pipes 15mm bore complete all as specified and directed.

S&F in repair PVC valveless flushing cistern, low level white with inlet ball valve float and handle including brackets complete fixed capacity of flush 10 ltrs complete all as specified and as directed.

Dismantling of water tanks (RCC hume Pipe/PVC) including disconnecting all connections etc 1000 ltrs capacity. complete for following capacity of tanks .

Refixing the dismantled rotational moulded polythylene water storage tank 1000 ltrs capacity (cylindrical/vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing ball brass valve high pressure with polythene float and fly nut, 20mm bore complete for following capacity of tanks

S&F new rotational moulded polythylene water storage tank 1000 ltrs capacity (cylindrical/vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing ball brass valve high pressure with polythene float and fly nut, 20mm bore complete for following capacity of tanks

Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.

Fixing only 15mm bore tubes, any grade, to walls and ceilings or laying in floors

Fixing only 20mm bore tubes, any grade, to walls and ceilings or laying in floors

S&F 15mm boreTubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

S&F 20mm boreTubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.

Cutting chases in Stone, concrete block or slab walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth all as specified and as directed.

S&F in repair 15mm bore Gun metal gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.

S&F in repair 20mm bore Gun metal, globe or gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.

Dismantling of PVC Pipes with fittings upto 75mm to 110mm dia complete all as specified and as directed.

S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall/floor complete all as specified and as directed.

All as per item No 99 but except pipe complete all as specified and directed.

S&F for 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall complete all as specified and as directed.

All as per item No 101 but except pipecomplete all as specified and directed

S&F PVC (SWR) bend with access door any radius 110mm complete all as specified and directed.

S&F PVC (SWR) bend with access door any radius 75mm complete all as specified and directed.

S&F forn110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F for 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F 75 mm PVC (SWR) junction single T equal or unequal complete all as specified and directed .

S&F in repairs 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

Complete removal of existing treatment and applying two coats of white wash on surfaces of ceiling, including removal of unnecessary nails and filling of holes/cracks by crack filler, complete all as specified and directed.

Complete removal of existing treatment and applying three coats of white wash on surfaces of walls, including removal of unnecessary nails and filling of holes/cracks by crack filler, complete all as specified and directed.

Complete removal of existing treatment and applying two coats of oil emulsion distempering over a coat of interior wall primer over 1.5mm thick wall care putty, including removal of unnecessary nails and filling of holes/cracks by crack filler on surfaces of walls, complete all as specified and directed.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately)

Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge

Supply only integral liquid water proofing compound complete all as specified & as directed by Engineer-in-Charge. Make : Pidilite/Sika

M&L for plain fillets of second class hard wood, square, rectangular or triangular in section, wrought fixed on walls with nails having cross sectional area exceeding 13sqcm & not exceeding 25 sqcm complete all as specified & directed .

M&L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides upto dado level) including removal of demolished material exc 250m and n exc 500m, prepration of surface by cleaning to remove loose particles, dust, latance etc, replacement of floor trap, and applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421,and applying one coat each of Nitoproof 100 priming coat @1Ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, rendering again 40mm thick in CM (1:4) mixed with WPC Conplast - 421, area of floor/kitchen upto 0.5 Sqm complete all as specified and as directed.

M&L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides upto dado level) including removal of demolished material exc 250m and n exc 500m, prepration of surface by cleaning to remove loose particles, dust, latance etc, replacement of floor trap, and applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421,and applying one coat each of Nitoproof 100 priming coat @1Ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, rendering again 40mm thick in CM (1:4) mixed with WPC Conplast - 421, complete all as specified and as directed.

S&F LDPE pipe 50mm bore fixed to wall/ceiling with bends/elbow complete all as specified.

S&F in repair mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and incl welding complete all as specified and as directed.

M&L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in concrete bed to 150mm bore drain pipes including packing under & haunching against the sides of pipes after they are laid & tested for 150mm bore pipe including demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement concrete mortar complete all as specified and as directed.

M&L for Reinforced concrete pipes 150mm bore class NP-2, laid and jointed complete with collars, complete all as specified and as directed.

M&L for precast cement concrete 1:2:4 type B-1 using (20mm aggreates) set in CM (1:4) as in cover slabs (for manhole etc) & simillar articles with plain faces complete (Reinforcement will be measured and paid separatly) all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out hard/dense soil complete all as specified and as directed .

Returning, filling in including spreading, levelling, watering & well ramming in layers n.exc 25cm complete all as specified and as directed.

M&L for Providing, cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directing complete all as specified and as directed .

Removing excavated material (surplus soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed by Engineer-in-charge.

S&F Kitchen cabinets including all fittings and fixtures incl the follwing. (a) 19mm thick plywood of commercial block board,Make: kitply or Duro. (b) 0.9 mm thick commerical lamination on both side fixed to black board(colour and design as approved) (C) SS pullout basket SS finish of plain 15'' x 20'' x 6'' (D) 'D' type handle 100mm SS finish (E) Pullout basket SS finish cutlery wire of size 15''x20''x4'' (F) 2nd class hard as in frame work (G) SS channels for pullout basket as required. (Note:- The measurement shall be taken from front elevation and not girthwise.

S&F in repairs stainless steel plate rack of size not less than 90cmx75cm fixed with stainless steel screw including taking out old unserviceable wooden plate rack as approved by GE complete all as specified.

Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

M&L Point wiring with two single core, 1.5 sqmm (nominal area) size multistranded copper conductor cable and one single core 1.5 sqmm size copper conductor cable as earth continuity conductor connected to common earth dolly,1100 volts grade , FRLS, PVC insulated unsheathed cable in and including PVC rigid conduit of suitable size, duly concealed in wall, floor, ceiling etc, including provision of mild steel modular type terminal boxes of suitable module made with mild steel sheet duly galvanised and suitable for fixing modular type switches / sockets / regulators / AC starters etc. fixed in recess of wall with brass chromium plated screws and cap washer complete for the following:-

One light point controlled by one switch

One fan point controlled by one switch

One 5 pin socket outlet. 5 Amps on the same board.

One 5 pin socket outlet. 5 Amps on the independent. board

One bell/ buzzer point controlled by one push button

One light point controlled by two two way switches.

All as per item No-131 above but One 15 A socket outlet independent with 2.5 sq mm PVC cable and 2.5 sqmm cable as earth continuity wire.

Supply and fix switch piano modular single pole one way 6 Amps one module complete all as specied .

Supply and fix switch piano modular single pole one way 16 Amps one module complete all as specied .

Supply and fix Modular switch 2 way 6A, 1 modulee complete all as specied .

Supply and fix Modular Bell push 6A 1 module complete all as specified .

Supply and fix Bell electric AC 230 Volts single pole ding dong type complete all as specified and as directed.

Supply and fix modular socket outlet 6A - 2/3 pin combined 2 module (multi purpose ) complete all as specified and as directed.

Supply and fix modular socket outlet 6A/16A - 2/3 pin combined 2 module, complete all as specified and as directed.

Supply and fix ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and as directed.

S & F in replacement of lamp angle/batten holder Bakelite complete all as specified and as directed.

S & F Decorative wall light fixture made up of Polycarbonate, suitable for 9 W retrofit LED Lamp B22 base.. Make Havels, model- LHDL06160099 (CITY 3)

S&F in replacement LED tube light 20 Watt fitting white powder coated slim box type batten made of formed CRCA sheet with snap on installer sutable for double side connection LED tube in and including batten and tube etc complete in all respect. Make- Havells Model- Fixture REGALBATTENT 8UPTO1X22WSSBSWH, Tube-CRYSTAL 1213T8D STL 20W LED 865S GLASS or equivalent in Wipro/ Philips/Bajaj

S &F New E-Lite LED Pride Plus Neo. Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack With 10watt LED tube

Supply and fix fan step regulator, 120W - 2 module for ceiling fan of size 900 mm to 1400 mm sweep working on 230 Volts AC supply with all necessary connections etc complete all as specified and as directed.

Supply and fix sheet metal enclosure DBs SPN, 240V with 200 Amps rated bus bars double door complete all as specified and as directed of 12Ways

Supply and fix sheet metal enclosure DBs SPN, 240V with 200 Amps rated bus bars double door complete all as specified and as directed of 4 Ways

Supply and fix in replacement MCB SP 6 to 32 Amps, 240 volts complete all as specified and as directed.

Supply and fix in replacement MCB SPN 32 Amps, 240 volts complete all as specified and as directed.

Supply and fix MCB SPN 40 Amps, 240 volts complete all as specified and as directed.

M & L sub main wiring with 2 single core, 10 Sq. mm, PVC insulated unsheathed,multi stranded copper conductor FR cable 1100 Volts grade incl 10 Sqmm PVC insulated unsheathed multi stranded copper conductor FR as continuous earth wire and connecting to common earth terminals complete all as specified and directed in PVC conduits Note :-(i) Two run of copper cable and one run of earth wire and PVC conduit shall be measured as one length.

Ditto all as per item No - 151 above but with 2 runs of 4 Sqmm cable with one run of 4.0 Sqmm cable for earthing.

S & F Plug & socket enclosure in sheet metal enclosure with 20A SP MCB complete all as specified and as directed.

M & L for power line sheet metal enclosure double door surface mounting distribution board suitable for MCCB TP/TPN as incomerl for 415 Volts 4 way with 200 Amps bus bar ( without MCCB & MCB) with metal door. Make: L&T, Model-DBVTL004DD or equivalent

M&L for MCCB TPN 100 Amps, 30 KA, 440V 50Hz, . Make L&T or equivalent

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion

Taking down care fully ceiling fans 1200 mm to 1400 mm sweep, keeping in safe custody painting with 2 coats of white enameled paint & refixing the same after completion of B/R work all as specified and as directed( Note: minor accessories like capacitors, flexible wire , connector & hanging clamps with rubber bush and 02 Nos nut and bolts is deemed to be included in rate quoted)

M/S SANTOSH CONSTRUCTION CO

M/S ANAND G NUNSE